Torpsystems Oy

Condition: used, Height-adjustable with a rabbeting cutter; the fence can be adjusted via the handle and is mounted on a sturdy table with rollers. Csdpfxsz H Txbj Aqtsrh Location: Nattheim

Condition: used, Storage location: Nattheim Csdpfxsz H Tw Rj Aqtsrh

Condition: used, Year of construction: 1997, Table milling machine Manufacturer: SAC Type: TS 145 Year of manufacture: 1997 Technical data Spindle diameter: 30 mm Spindle travel: approx. 150 mm Swivel range: -5 to +45 degrees Height adjustment: electric Swivel adjustment: electric Fence adjustment: manual Spindle speeds: depending on the model, 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Motor brake: automatic Dust extraction: 2x120 mm Table: approx. 1,200x820 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Crjdpfx Ajz Hwkujqtsh

Condition: repair required (used), Year of construction: 2000, functionality: not functional, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, overall weight: 1,100 kg, Equipment: documentation/manual, HOFMANN table milling machine, type TF1200, with a sliding carriage on the side and an extendable table support, with electric height adjustment. Unfortunately, the programs on the control unit cannot be saved. Otherwise, the machine is in very good condition. Cedpfx Aez Eztkoqtorh

Condition: used, Year of construction: 1991, Design: fixed Table size: 1200x730 mm Table height: 900 mm Spindle speeds: 3000/4500/6000/7000/10000 rpm Crjdpez Ebplefx Aqteh Milling cutter diameter: 30 mm Spindle working length: 180 mm Spindle direction: right/left Speed display: optical Automatic motor brake: mechanical foot brake Design of fence jaws: Aigner fence system Fence adjustment: manual Display of milling fence: none Feed mechanism: with 3 rollers Control panel position: bottom Weight approx.: 600 kg Motor power: 4 kW Dust extraction diameter: 120/120 mm Location: Rieth

Condition: good (used), Year of construction: 1992, functionality: fully functional, Motor: 5 kW Tilting milling spindle: -5 to +45 degrees Spindle height adjustment: 130 mm Spindle rotation direction: right / left Spindle speeds: 3000/4500/6000/9000 RPM Motorized height and tilt adjustment Extended table version: 2,000 mm Cedpfxoz D A Sfo Aqtsrh with extendable support Integrated stop with 4-roller feed mechanism

Condition: good (used), total length: 2,500 mm, stable, well-functioning machine with a drive unit. Credpfoz Dfy Sex Aqtsh axle: 50 mm.

Condition: excellent (used), HOFMANN TFS 107 table milling machine – used Tilts on both sides, Height adjustment is electric, Tilting is electric, Milled cast iron table, Extendable support, Finely adjustable fence, Quick-change tool holder for milling cutters, Right/left rotation, Socket for feed ----- Technical data ----- Tilting range: -45.5 to 45.5°, Table size: 2,000 x 815 mm, Working table height: 895 mm, Spindle diameter: 30 mm, Usable length of milling spindle: 120 mm, Max. milling cutter diameter: 240 mm, Max. diameter of recessed milling cutter: 240 mm, Height adjustment: 120 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 7.5 kW, Dust extraction port Ø: 120 mm, Dust extraction port Ø at the bottom: 120 mm, Dimensions (L x W x H): 2,000 x 1,300 x 1,300 mm, Weight: 820 kg Quality information: Crjdpfx Aoz A Uptjqtsh - Milling spindle newly fitted with bearings - Roundness accuracy of the milling spindle checked - Brake checked/replaced - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: used, Work table: 1100 x 800 mm Table height: 900 mm Motor: 3/4 kW, rigid milling spindle, MK 5 Spindle stroke: 170 mm Max. tool diameter (profiling): 250 mm Credpjz A H R Aofx Aqtoh Max. tool diameter (tenon and mortise machining): 250 mm Spindle speeds: 3000/4000/6000/8000 RPM Weight: approx. 600 kg Location: Nattheim

Condition: used, Year of construction: 1997, Spindle swivels: Yes, -5 to 45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: mechanical counter Cedpoz A Eaiofx Aqtsrh Spindle diameter: 30 mm Speeds: continuously variable Power consumption: 8 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120 mm Machine length: 1400 mm Machine width: 1400 mm Weight: 1100 kg

Condition: good (used), Two-speed motor Spindle shank diameter: Ø30 mm Vertical spindle travel: 150 mm Maximum milling cutter diameter: Ø250 mm Crjdpfx Aqsz Aflhetoh Spindle speeds: 3000 / 4000 / 6000 / 7800 rpm Motor power: 3.1 / 2.4 kW Table dimensions: 670 x 940 mm

Condition: used, Year of construction: 1962, machine/vehicle number: 62/51 12, We are offering this used Bäuerle SFM table milling machine, manufactured in 1962, for sale. It is model no. 62/51 12. We are offering the machine for 1,700 euros net, negotiable. Crodpfx Aqjz Afa Soteh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Catalog number: 8097 TECHNICAL DATA - spindle diameter: 30mm - spindle working height: 170mm - spindle locking - adjustable spindle (up/down) - original cast iron guide - 5 types of rotational speeds: 3000, 4500, 6000, 8000, 10000 rpm - table dimensions: 730x1190mm - brake - motor: 5.5kW - dust extraction port diameter: 120mm - dimensions (L/W/H): 850x1200x1220mm - weight: 380kg ADVANTAGES - Made in Italy - Brake - Unpainted - Used milling machine, very good condition Cedpfjzzyrmsx Aqtorh - Designed for professional use Net price: 10900 PLN Net price: 2535 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 1973, Used machine Crsdozy Dzvspfx Aqtsh Year of manufacture: 1973 Equipment and technical data:

Condition: excellent (used), Catalog number 7784 TECHNICAL DATA - Spindle diameter: 30mm - Spindle working height: 150mm - Interchangeable spindle - Spindle locking Crodpfx Aezwwd Esqtoh - Adjustable up/down + angle - Original cast iron guide with full adjustment - 4 types of rotation speeds + right/left: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800mm - Motor: 3.7kW - Dimensions (L/W/H): 1100x1400x1160mm - Weight: 775kg ADVANTAGES - Made in Germany - Used milling machine - Very good condition Net price: 6900 PLN Net price: 1605 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, spindle diameter: 30 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, Panhans 240A underspindle milling machine Spindle diameter: 30 mm Spindle length: 130 mm Spindle speed, variable: 3000/4500/6000/9000 rpm Crodpszwf Irjfx Aqteh Electronic spindle height adjustment Electronic angle adjustment Main motor power: 11 kW Additional longitudinal carriage mounted to the worktable Feed system: 3-roller

Condition: used, Year of construction: 2024, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pivoting range: 45 °, actuation type: manual, rotational speed (min.): 2,800 rpm, table width: 500 mm, table length: 700 mm, total length: 1,200 mm, total width: 900 mm, total height: 1,600 mm, overall weight: 95 kg, Equipment: documentation/manual, • The mortise milling cutter, type QNF, is used for horizontal and vertical mortising in wood, aluminum, and PVC. • The drive unit with the milling head runs in a guide arm, which is supported by four ball bearings. Csdpfx Aszvfw Roqterh • Machine stand included. • Robust gray cast iron construction. • Hydraulic feed brake. • Pneumatic horizontal material clamping, on both sides of the milling area. • Lower milling cutter guard can be connected to an extraction system. • Carbide-tipped mortise milling cutter, 250 x 60 x 40 mm, Z=4+4.

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! Crodpfx Aezvdk Ajqtsh The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, Spindle moulder manufactured in 2008. This Colombo AM 60 features a robust design suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the Colombo AM 60 spindle moulder we have for sale. Contact us for further details. • Control: Computer / PLC-controlled Cjdezvcqbspfx Aqtjrh • Display: 12" colour LCD-TFT • Interface: RS232 • Operating system: Windows • Saw unit – blade diameter: 400 mm • Saw spindle diameter: 30 mm • Saw blade speed: 3,000 rpm • Saw motor power: 3 kW • Tenoning spindle diameter: 50 mm • Effective spindle length: 600 mm • Max. tool diameter: 320 mm • Effective travel: 550 mm • 1st profiling spindle diameter: 50 mm • 1st profiling spindle effective length: 600 mm • 1st profiling spindle max. tool diameter: 200 mm • 1st profiling spindle speed: 6,000 rpm • 1st profiling spindle motor: 7.5 kW • 1st profiling spindle effective travel: 550 mm • 2nd profiling spindle diameter: 50 mm • 2nd profiling spindle effective length: 600 mm • 2nd profiling spindle max. tool diameter: 220 mm • 2nd profiling spindle speed: 6,000 rpm • 2nd profiling spindle motor: 2.2 kW • 2nd profiling spindle effective travel: 550 mm • Glass bead spindle diameter: 35 mm • Glass bead spindle effective length: 20 mm • Glass bead tool diameter: 200 mm • Glass bead spindle motor: 2.2 kW • Tape/feeding carriage speed: 1–80 m/min • Safety enclosure: Sound-insulated safety guarding

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm - Runs in both directions (left/right) - with Haffner feed unit - including accessories Crjdpfx Aozuyxajqtoh Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Catalog number: 7340 TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 120mm - interchangeable spindle - spindle locking - adjustable up/down - original cast iron guide with full adjustment - 4 types of rotational speeds + right/left - table dimensions: 1030x900mm - motor: 3.8kW - dimensions (L/W/H): 1030x1000x1080mm - weight: 614kg ADVANTAGES – Polish production – Very good condition Cjdpfxsztznao Aqtorh – Used milling machine Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW Cedpoztwr Ijfx Aqtsrh - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Condition: excellent (used), Catalog number 7882 TECHNICAL DATA - spindle diameter 30mm - spindle working height 200mm - interchangeable spindle - spindle locking - adjustable up/down - cast iron guide with full adjustment - 3 types of rotational speeds + right/left - table dimensions 1000x950mm - cast iron table - with side table 1100x330mm - clamping device - motor 3.7kW - brake - dust extraction nozzle diameter 120mm - dimensions (L/W/H) 1750x1400x1250mm - weight 683kg ADVANTAGES – made in Germany – with side table Csdpfxsztqupo Aqterh – used milling machine – very good condition Net price: 7900 PLN Net price: 1837 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2006, Tree 50mm Long tables Cjdpfx Aszr R Dnsqtorh Front-mounted table extension Trainer 3 rollers 380V

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation - Special ball bearings for high-speed operation - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW Cedpfx Aqezr Rq Istorh - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h - Airflow rate at the router fence: 1,060 m³/h - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg