Pharma Equipment

Year of construction: 2001, condition: used, Water consumption per cycle: 35/40l, electrical connection: 36A, connected load: 22.5kW, length: 640mm, width: 640mm, height: 640/1000mm, an on-site inspection is possible. Prsdpfjz S Ivtjx Abaoc

Year of construction: 2019, condition: like new (used), Operates using the Coriolis effect. Designed to directly measure mass flow, fluid density and temperature and to calculate volumetric flow and concentration. Serial number 14867499. Manufactured in stainless steel, with a twin curved tube configuration, electrical connection via a terminal box and flanged process connections. Flow calibration factor 703.174.29. Constants K1 10696.58, DT 4.42, K2 12680.02 and FD 227.8822. Designed for group 1 fluids, with an allowable temperature range from minus 196 to 204 degrees Celsius, maximum pressure of 40 bar at 25 degrees Celsius and allowable pressure of 34 bar at 204 degrees Celsius. CE marked. Predpfez R A S Hex Abaoc

Year of construction: 2021, condition: like new (used), machine/vehicle number: 100056463, This is a miniature Buchi B-290 spray dryer (Mini Spray), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, as well as industrial applications. Podpfx Abez E Sq Hjasrc It is a BUCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance. 💥 End-of-year clearance sale 💥

Condition: used, Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible. Psdpfxoz Da Rlj Abaerc

Condition: refurbished (used), functionality: fully functional, pump pressure: 400 bar, This excellently maintained Agilent 1100 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent Service Engineers. The last maintenance was performed in July 2026, during which the system successfully passed the inspection. Configuration: Agilent 1100 Solvent Tray Prjdpfx Abszzdxqoaoc Agilent 1100 Vacuum Degasser G1322A Agilent 1100 Quaternary Pump G1311A Agilent 1100 Standard Autosampler G1329A Agilent 1100 Thermostated Column Compartment G1316A Agilent 1100 Variable Wavelength Detector (VWD) G1314A Agilent 1100 Controller G1323B 3-month warranty 3-month warranty

Condition: refurbished (used), functionality: fully functional, pump pressure: 400 bar, This excellently maintained Agilent 1100 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent service engineers. The last maintenance was performed in July 2026, during which the system successfully passed the inspection (PASS). Configuration: Pedpfx Aezza H Dobajrc Agilent 1100 Solvent Tray Agilent 1100 Vacuum Degasser G1379A Agilent 1100 Binary Pump G1312A Agilent 1100 Standard Autosampler G1329A Agilent 1100 Thermostated Column Compartment G1316A Agilent 1100 Variable Wavelength Detector (VWD) G1314A 3-month warranty

Condition: refurbished (used), functionality: fully functional, This excellently maintained Agilent 1200 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent Service Engineers. The final maintenance and qualification were performed in July 2026, during which the system successfully passed the inspection (PASS). Configuration: Agilent 1200 Solvent Tray Agilent 1200 Vacuum Degasser G1322A Prjdpfx Abozy Hldoaec Agilent 1200 Quaternary Pump G1311A Agilent 1200 Series Standard Autosampler G1329A Agilent 1200 Thermostatted Column Compartment G1316A with integrated switching valve Agilent 1200 Series Diode Array Detector (DAD) G1315B PC with Windows 10 Agilent ChemStation CDS software included 6-month warranty Enjoy 25% off your first service when you sign up for a maintenance contract with us.

Year of construction: 2021, condition: good (used), functionality: fully functional, Moisture Analysis Device Computrac® Vapor Pro® XL Autosampler Removed from a battery cell manufacturing line Automated, chemical-free moisture analysis The Vapor Pro XL (VPXL) Autosampler is an advanced version of the Vapor XL, featuring the latest moisture-specific analysis technology. The VPXL Autosampler offers an automation function for up to 16 samples with individual test profiles. Measurement range (moisture): 10 ppm (10 µg | 0.001%) - 100% Number of samples: Up to 16 Moisture resolution: 1 ppm (0.1 µg | 0.0001%) Weight: 18.6 kg Dimensions: 737 L x 394 W x 208 H mm Results: % Moisture, ppm Moisture, µg Water Data storage: Includes up to 250 test programs, stores the last 1000 test results and the last 100 test diagrams. Predszx S Etepfx Abaec

Condition: used, Year of construction: 2008, functionality: fully functional, O.M.A.R. FANTASY PLUS – PHARMACEUTICAL BLISTER MACHINE For sale: O.M.A.R. / Dott. Bonapace FANTASY PLUS semi-automatic blister machine, used in pharmaceutical production, supplied with extensive original format tooling and comprehensive technical documentation. TECHNICAL DATA Manufacturer: Dott. Bonapace & C. / O.M.A.R., Italy Model: FANTASY PLUS Year: 2007 Voltage: 220/230 V Operating pressure: 9 bar Weight: approx. 125 kg CE compliant APPLICATION Suitable for pharmaceutical R&D, laboratories, clinical batches, stability studies, samples, and small production batches. According to the original documentation, the machine is designed for: - PVC/ALU Oblong - PVC/ALU Round - ALU/ALU Oblong - ALU/ALU Round EXTENSIVE TOOLING A major advantage is the exceptionally large quantity of format tooling included. The package contains numerous forming, sealing, and die-cutting components for different blister configurations, including: - Forming molds and plates - Heated forming/blowing plates - Sealing plates and molds - Cutting dies and counter plates - Centering components - Various format inserts - Coding/embossing accessories - Additional format-specific components Different round, oblong/oval, and rectangular cavity configurations are available. All tooling shown in the photos is included. Due to the large quantity of tooling, the exact allocation of every individual component to a complete format set cannot be guaranteed. Pedpfezxc Apjx Abasrc DOCUMENTATION Comprehensive original documentation in German is included, covering CE documentation, technical data, operation, forming, sealing, die cutting, ALU/ALU processing, maintenance, spare parts, and tooling codification. Original drawings for individual blister formats are also available. CONDITION Very well-maintained used condition from pharmaceutical use. Inspection and demonstration by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. PRICE: EUR 32,500 net, negotiable CYCRON GmbH Switzerland Subject to prior sale and errors.

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Italian Blister Packaging Machine Year: 2002 Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Prsdpfx Aszvycnobaec Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Condition: excellent (used), Model MAC 2 British Rema Aerosplit dynamic air classifier for high efficiency separation of soft to medium hard dry powders in the 150 - 10 micron size range. Classifier was manufactured in 2005 but was never installed. Machine No. H61802. Installed Power - 11 kW. Airflow - 6,000 m3/hour MAC 2 is now known as the model 450. Can be operated either in an independent air classification system or in closed circuit with a mill. Classifier offered as machine only but can be supplied with ancillary equipment and controls if required. Machine offered in "as is" condition with no warranty given or implied. Inspection invited at our premises in Uttoxeter, Staffordshire. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience, we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Prjdpozvgkljfx Abasc Please check out our other listings and subscribe to our stock list.

Condition: used, Used Charles Thompson model CT400 Hastelloy C22 Mobile Agitated Nutsche Filter Dryer Manufacturer: Charles Thompson Limited, UK Model: CT400 Type: Mobile agitated Nutsche filter/dryer Year: 2001 Filter diameter: approx. 400 mm / 15.7 in Filtration area: approx. 0.125 m² / 1.35 ft² Product-contact material: Hastelloy C22 External/jacket: 316L stainless steel Predpezun Hlofx Abasc Shell design: 3 bar/full vacuum Jacket design: 3 bar/full vacuum Design temperature: -30°C to +100°C ASME: Section VIII Div. 1 (1998) + A99 Empty weight: 570 kg / 1,257 lb Agitator: single-blade, approximately 0.75 kW Agitator lift: hydraulic raise/lower Configuration: jacketed vessel on mobile stainless frame/casters.

Year of construction: 2016, condition: excellent (used), Belimed WD 290 Prjdpfszrfrajx Abaec Washing machine / cleaning and disinfection unit This device, made of stainless steel – with an exhaust air condenser (option with a higher design) – is specifically designed for cleaning laboratory glassware, infusion bottles, production parts, and similar items. The WD 290 is available with two automatically operated, vertically moving full-glass sliding doors for visual inspection during the entire processing cycle. Continuous process reliability is also ensured. The machine itself monitors all relevant performance parameters via an independent process data monitoring system. Loading is done manually through a vertical glass sliding door located on the front of the machine. The items to be cleaned (laboratory utensils, laboratory bottles, etc.) are placed on the loading carrier (nozzle car). The nozzle system consists of two rotating external washing arms (top and bottom), through which the individual media, such as washing, rinsing, and cleaning solutions, are passed. The rinsing medium is located externally and fed in depending on the program selection. The WD 290 is equipped with an electric heater for the washing chamber (22 kW) and the dryer (10.5 kW). The usable interior space of 69 x 63 x 80 cm has a capacity of approximately 350 liters (gross: 430 liters). Operating consumption values: Potable water approx. 40 l/min Hot water approx. 40 l/min Cold water approx. 40 l/min The system is operated via the panel on the front of the machine. English and German are available as operating languages. By default, 9 pre-programmed cleaning programs are stored.

Year of construction: 2026, condition: new, New portable homogenizer with a 145 mm diameter rotor, made of AISI 316L in all parts in contact with the product, and with a polished finish Ra < 0.80 μm. It can withstand vacuum and a working pressure of 16 bar, and its motor has a power of 7.5 kW, providing a rotation speed of 2,930 rpm. It includes an atmospheric system for solid intake, which allows the direct injection of powdered solids into the homogenizer's intake. This process solves the problems of incorporating floating solids and improves processing time if all other ingredients are loaded through the hopper, as they are added directly to the homogenizing chamber. The hopper has a capacity of 50 liters and features a butterfly valve, which allows it to be closed and the inlet flow rate to be regulated. All components are mounted on a wheeled cart to facilitate mobility. Production: 5,000 L/h Motor: 7.5 kW at 2,930 rpm 50 Hz Pjdpfx Abjzktgceaerc Intake: DN50 Outlet: DN50

Condition: as good as new (ex-display), CEIA metal detector with conveyor belt Prsdpfozia Hasx Abajc for the detection of glass bottles and plastic cans including documentation.

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG High-Resolution Continuum Source Atomic Absorption Spectrometer with PC, AAS ContrAA 700 Pedpfxozh Iqws Abaerc Model: AASContrAA700 Condition: Used Technical Data: 230V AC 50/60Hz 2100VA General: Optical System Reflection optics with protective coating and optical system with light-tight encapsulation Monochromator Echelle grating double monochromator with F=380 mm focal length and variable intermediate slit; pre-monochromator with quartz prism. Wavelength selection via mirrored neon auxiliary lamp Wavelength range 185-900 nm Spectral bandwidth 2 pm at 200 nm Accessories: Documentation/Manual PC (Windows 7), Monitor, Mouse, Keyboard, Connection cables 5x IC standard tube 407-A81.011 3x Graphite pipetting inserts 407-A81.020 contrAA fuse set Grease for O-rings 2x Grommet 702-A81.233 1x Grommet 702-A81.234 1x Collection tray 407-110.499 4x Carrying handles

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Prjdpfx Aezhuuvsbaec Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Currently, up to 5 units are available for sale. The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Year of construction: 1983, condition: used, Manufacturer: Manesty Prsdpfx Abszg Nfysajc Model: Accela-cota 150 Year : 1983 Type: film and sugar coating unit Technical file available Classification: ATEX EEx (to be requalified) Coater Useful volume: approx. 170 L Maximum weight: 150 Kg Diameter of drum: 1219 mm / 48″. Rotation speed: 2.5 – 15 rpm Cabinet with frequency converter Air treatment unit Air volume: 2890 m3/h Temperature : 0-80°C Steam pressure : 2 – 5 bars Steam consumption : 145 kg/h Fan motor power : 0.75 KW Fan (not original) Power : 17,5 KW

Year of construction: 1982, condition: used, Manesty – ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Prsdpfjzg I T Aex Abajc Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP system to guarantee fast return to production In conjunction with our m-tecTM control system, Oystar Manesty provides a fully validatable Clean in Place (CIP) option. From the initial rinse through to compressed air cleaning of solution tubes, the XLTMCota Clean in Place (CIP) was designed to promote fast return to production by eliminating the need for manual cleaning. Simple and fast loading and unloading facility Tablets can be loaded with the front door closed or open using simple load chutes designed to suit different types of containers. Tablets are discharged by reversing the direction of the drum. This method has been proven to be extremely fast and gentle at the same for safe handling of the finished product. TECHNICAL INFORMATION Weight : 1590 kg Coater Dimensions : H 2065 x W 1665 x D1475 Spray Guns : 3 Working Volume : 170 L Compressed Air Consumption (5bar from Coater) : 7.9 Air Volume Range (m3/hr) : 1500 – 2500 Main Heater Temperature Range (°C) : 10 – 85 Main Heater Steam Consumption ( kg/hr ) : 117 Sold with : Donaldson Torit – Dust collector DCE DF02 12R

Condition: new, 13 suction valves, as shown in the picture. Manufacturer unfortunately unknown. Psdpfx Abjzaad Ijasrc

Year of construction: 2015, condition: ready for operation (used), A pharmaceutical sterilization autoclave Bosch (Schoeller-Bleckmann Medizintechnik) is available. Design: horizontal, doors: 2, chamber volume: approx. 1800l, process method: vacuum/steam/sterilization, sterilization goods: porous goods/solid instruments/components, max. liquid product volume: 50ml. Documentation available. An on site inspection is possible. Psdpfx Aboyuyvyoajrc

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a fully procured, modular GMP process system for the production of C1-Esterase Inhibitor (C1-INH) from human plasma. The plant was professionally engineered, procured, and has successfully completed FAT, but has never been installed or put into operation. This is expressly not a used line, but a factory-new project and module package. Year of manufacture: 2020 Condition: brand new, in original packaging Operating hours: 0 Storage: temperature-controlled warehouse SCOPE OF SUPPLY (EXCERPT WITH QUANTITIES) Adsorption / Chromatography (Bay 2 & 3): - 2 adsorption lines (DEAE / QAE) - 2 buffer tanks - 2 pigging systems - 2 cooled transfer lines (pipe-in-pipe) - 4 filter press racks - 4 cooling cascades - 4 CIP loops Precipitation PRE: - 3 pre-precipitation tanks (incl. 1,000 L) - 3 main precipitation tanks - 3 CIP stations - 3 multi-layer filters - 1 vacuum station Buffer Preparation (Bay 2 & 3): - 6 buffer vessels (NaCl, DEAE, QAE buffer) - 6 temperature control skids - 4 media/WFI/CIP distribution units LEP 2.3 – Washing & Elution Solutions: - 2 washing solution tanks (up to 9,000 L) - 2 elution solution tanks - 4 temperature control units LEP 13 – Ammonium Sulfate System: - 1 preparation tank (3,500 L) - 2 storage/distribution tanks - Solid material crusher - Dosing & neutralization system - Heat-traced pipes Media Distribution: - 1 pharmaceutical NaOH 1M system - 1 technical NaOH 32% system - 1 acetic acid 60% system - Pump and dosing stations Additional Process Tanks: - >15 stainless steel tanks 316L (1,000–9,000 L) Pedoym Ayfspfx Abaorc - Various skids, distribution and instrumentation units GMP & DOCUMENTATION - URS / requirement specifications per LEP - P&ID diagrams - Layout and sectional drawings - EMSR & instrumentation documentation - FAT documentation - Complete weld certification (digital) - Extensive photo documentation The project documentation is fully available both digitally and additionally physically archived, structured in 316 folders. Process control system connection with pre-configured MES interface is foreseen. Cleanroom integration according to specification. SALE Preferably as a complete system. Modular sale possible if the entire package is not sold. Suitable for plasma fractionators, biopharma manufacturers, CDMOs, or new site establishment projects. Availability: short notice Inspection: by appointment Price: on request

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Package 15 PP6715 – CS6715 Psdpfx Abjyl Rqpeasrc Brinox LEP 11 – Pharma Chromatography and CIP System New – original packaging – Factory New Manufacturer: Brinox Model: LEP 11 Version: PP6715 with CIP System CS6715 Condition: New, unused, original packaging Description For sale is a high-quality pharmaceutical chromatography system Brinox LEP 11, consisting of the PP6715 control panel and the corresponding CS6715 CIP unit. The system is completely new, unused, and in the manufacturer's original condition. It was designed for industrial C1-INH chromatography and meets the highest GMP standards. Scope of Functions - Slurry transfer - Washing and elution processes - Transfer to pre-precipitation tanks - Gel disposal - Independent CIP loop Technical Features - Product-contacting components in stainless steel 1.4435 - Electropolished, Ra ≤ 0.8 µm - FDA-compliant sealing systems - CIP/SIP-capable - Operating pressure up to 6 bar - Temperature range up to 95°C - Fully drainable piping CIP Skid CS6715 - Stainless steel frame - Centrifugal pump - Shell-and-tube heat exchanger - Temperature control of cleaning media - Adjustable feed pressure The system is in factory-new condition with zero operating hours.

Year of construction: 2020, condition: new, functionality: fully functional, Equipment: documentation/manual, Package 14 PP6713 – CS6713 Brinox LEP 11 – GMP Chromatography System with CIP Skid New – unused – in original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6713 with CIP System CS6713 Condition: New – in original packaging – never installed Description Offered is a pharmaceutical chromatography system LEP 11, consisting of the chromatography panel PP6713 and the corresponding CIP skid CS6713. The system is completely new, unused, and remains in the manufacturer’s original condition. The unit was designed for GMP-grade protein purification as part of C1-INH chromatography. System Features Cleanroom panel for wall integration Transfer lines to sieve-bottom tanks Precipitation vessel connection Gel waste disposal line Complete utility/process piping Technical Specifications Design pressure: –0.9 to +6 bar Design temperature: +2 to +95 °C Electropolished surfaces Ra ≤ 0.8 µm Pjdeyl Rnnopfx Abasrc Material: 1.4435 stainless steel Fully drainable GMP-compliant design CIP System CS6713 Stainless steel frame construction Centrifugal pump Shell-and-tube heat exchanger Conductivity, pressure, and temperature monitoring Adjustable CIP supply flow The system is brand new and has never been in operation.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Brinox LEP 11 – Pharmaceutical Chromatography System with CIP Unit New, unused, original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6711 with associated CIP unit CS6711 Condition: New – unused – original packaging (Factory New Condition) Prodpfsyl Ndnsx Abajc Description For sale is a Brinox LEP 11 pharmaceutical chromatography system, consisting of the chromatography panel PP6711 and the associated CIP unit CS6711. The system is completely new, unused, and in its original packaging. It was designed, manufactured, and delivered, but has never been installed or put into operation. This unit is designed for C1-INH chromatography and is used for controlled protein purification using sieve-bottom vessels in a GMP environment. Process Functions • Transfer of loaded QAE resin (slurry) • Washing and elution processes • Transfer of eluate to pre-precipitation vessel • Gel disposal via container station • Fully automatic CIP and SIP cleaning Technical Data • Fully CIP and SIP capable • Design pressure: –0.9 to +6 bar • Design temperature: +2°C to +95°C • Flow rate up to 10 m³/h • Adjustable slurry transfer 0.2 – 3 m³/h Design Features • Product-contact parts made of stainless steel 1.4435 • Electropolished Ra ≤ 0.8 µm • FDA and EU-compliant seals • Drainable construction • Cleanroom panel with tri-clamp connection points • Magnetically monitored transfer arcs • 0.2 µm vent filter CIP Unit CS6711 • Compact stainless steel skid • Centrifugal pump • Shell-and-tube heat exchanger • Adjustable operating pressure • GMP-compliant design The system is in factory-new condition and has never been used in production.