Phu"Mur-Tech"

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs Hnjdjy Dr A Eepfx Aczjk - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: excellent (used), Year of construction: 2024, • SPINNER Microturn, serial number 0151 • Siemens One control • Separate linear slide for machining up to Ø 400 mm • 12-station turret with BMT45 interface and Y-axis travel • Included tool holders: - 3 x turning tool holders (Heimatec 822501002) - 2 x boring bar holders (Heimatec 824006055) - 4 x axial drilling and milling heads ER 25 AX UT (Heimatec 801045135) - 2 x angular milling and drilling heads ER 25 AX UT (Heimatec 803045262) - 1 x power chuck RÖHM KFD-HS 125 Hnedpfx Aey Dn Spjczsk - 1 x power chuck SMW Autoblok BH-D 165-46-3-A05 • The machine lighting is disconnected due to a leaking enclosure

Condition: like new (used), Year of construction: 2011, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, feed length X-axis: 550 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 500 mm, controller manufacturer: FANUC Professional 5, workpiece length (max.): 650 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 350 kg, total height: 3,200 mm, total length: 3,550 mm, total width: 3,200 mm, overall weight: 15,700 kg, spindle speed (min.): 20,000 rpm, tool length: 300 mm, tool diameter: 70 mm, tool weight: 8,000 g, CNC controller: FANUC Professional 5 Axes X-axis travel mm: 550 Y-axis travel mm: 1000 Z-axis travel mm: 500 C-axis degrees: 360 (continuous rotation) / rotary encoder A-axis degrees: 150 (+30 120º) rotary encoder Feed rates m/min: X:32; Y,Z:40; Rapid traverse m/min: X,A,C:48; Y,Y:50; A,C:18 Worktable Table dimensions mm: 500 Hnodpfx Aey Ddq Ujczjk Maximum workpiece size (D x H) mm: 650x500 Max. workpiece weight kg: 350 T-Slot version: 4x185H8 Spindle Spindle speed rpm: 20000 Tool system Tool holder: HSK-A63 Tool magazine slots: 323 Tool changer: pinza doble Max. Tool Diameter: 70 With occupied neighboring places mm: 140 Tool Magazine: Matrix Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Custom Macro common variables (100) Synchronized tapping Preparación para trabajar con robot Robot EROWA Helical interpolation Custom Macro common variables (100) Machine running times Spindle Working: 0h (Retrofited) Basic machine dimensions / weight Length mm: 3550 Width mm: 2900 Height mm: 3200 Weight kg: 15700

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, Fanuc 18i MAPPS cnc control electronical hand wheel 30-fold automatic tool changer coolant through spindle device chip conveyor Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 1320x660 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 0-14000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 30 Eilgang x,y,z /rapid feed x,y,z 42,42,42 m/min Antriebsleistung Spindel / drive capacity spindle 22 kW Gewicht der Maschine ca. / weight ca. 7300 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Hnodpfx Acjy Ddqhszsk

Condition: good (used), Year of construction: 2003, All parts shown by hand not come with machine. Hjdjy Ddb Tspfx Aczjnk

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,203 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,270 mm, table load: 1,750 kg, overall weight: 6,450 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018. It features an impressive X-axis travel of 1067 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1270 x 610 mm and a maximum table load of 1750 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42i vertical machining centre we have for sale. Contact us for further details. • Control system: WinMax 5 (Windows platform), control with electronic handwheel • Display: 2 x 19" LCD screens • Interfaces and storage: Ethernet, USB, SSD storage, 2 GB RAM • Tool magazine capacity: 30 • Max tool diameter: 80 mm • Max tool length: 300 mm • Software/NC functions: Adaptive trochoidal milling, Simulation graphics, Tool and material library, Rigid tapping, Synchronous threading, Extended NC mode (ISNC), Dynamic lookahead up to 10000 blocks, Optimized surface quality motion control, Reduced cycle times, Adjustable surface quality, Tool change optimization • Integrated hydraulic tool clamping system • Machine manual integrated in control • Electrical: AC 400 V, 3-phase; 50 Hz; Full load 28 kVA; Full load current 42 A; Largest motor 13 kVA / 18 A; Interrupt capacity 10000 A; Short circuit current 20 kA • Environmental: Max ambient temperature 35 °C • The spindle was measured by a Hurco specialist 2-3 weeks ago Additional equipment • Chip conveyor • Coolant system, incl. coolant emulsion system • High-pressure coolant system 20 bar • Coolant through spindle 20 bar • Air through coolant nozzles • Air through spindle • Coolant spray gun • Washdown system for chip removal • LED work light Hnedpfjy A Skgex Aczek • Status signal lightAccessories on pictures are not included Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2014, operating hours: 17,500 h, functionality: fully functional, Technical details: Travel distance X-axis: 1,020 mm Travel distance Y-axis: 600 mm Travel distance Z-axis: 600 mm Rapid traverse X/Y-axis: 36 m/min Rapid traverse Z-axis: 24 m/min Feed rate XYZ-axis: 20,000 m/min Torque: 18,500 Nm Controller System:Heidenhain iTnc530 Spindle speed (max.): 8,000 rpm Table size: 1,120 x 600 mm Table load: 800 kg Overall weight: 6,500 kg Coolant supply: 30 bar Distance table center to spindle nose: 680 mm various tool tapers: SK 40 Number of in tool magazine: 24 pcs Additionally, the machine is equipped with: - Spindle change-over gearbox Hnsdpfey A Rd Sox Aczok - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,360 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X axis: 1,016 mm Travel Y axis: 660 mm Travel Z axis: 635 mm Max. spindle speed: 12,000 rpm Spindle power: 22.4 kW Table size: 1,372 x 610 mm Max. table load: 1,360 kg Rapid traverse X axis: 30 m/min Rapid traverse Y axis: 30 m/min Rapid traverse Z axis: 30 m/min MACHINE DETAILS Control: HAAS CNC control Tool changer: 20 + 1 positions Tool holder: SK40 EQUIPMENT Documentation/manual Chip conveyor Tool changer Coolant system Hnsdpfx Acsy A Ip Sozjk Work area lighting Electronic handwheel Network / USB interface

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Victor Vcenter P106 – Vertical Machining Center High-performance vertical machining center Rapid traverse rates: 48 / 48 / 32 m/min Spindle speed: 12,000 rpm Spindle power: 18.5 kW (S3 duty) Tool holder: BBT-40 Tool magazine capacity: 30 tools Hnsdpfx Acoy A Eufszok Roller guideways for superior rigidity and precision Full bottom guarding with coolant flush system Screw-type chip conveyors

Condition: excellent (used), Year of construction: 2008, operating hours: 8,500 h, functionality: fully functional, Vertical machining center DOOSAN MYNX 540, year 2008, installed in 2014. Working hours: 8,500, power-on hours: 25,000 – fully functional, in excellent mechanical and electrical condition. Hnsdey Azgqopfx Aczjk Fanuc 21iMB CNC control Spindle 15/18 kW belt-driven, DIN 40 (DIN 69671 A40) Boxways – 30 tools – table size 1200mm x 540mm, maximum table load 800kg Spindle nose to table distance 150–775mm Travel: X 1020mm, Y 510mm, Z 625mm Chip conveyor with tank M8 pump and high-pressure through-spindle coolant pump Mist extractor – internal light – three-color signal light 10 DIN tool holders included Maximum tool weight 8kg Automatic lubrication – transformer Weight 7,000kg – machine in operation and available for inspection CE certified – manuals and certification included.

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: Heidenhain, controller model: 410 / 426, table load: 500 kg, overall weight: 2,500 kg, spindle speed (max.): 6,000 rpm, spindle nose: bt40, Equipment: rotational speed infinitely variable, The stated price includes loading. Hnsdpfx Aoy Av S Ujczsk

Condition: excellent (used), Year of construction: 2017, x-travel 1016 mm y-travel 508 mm z-travel 635 mm Control HAAS spindle turning speed range 8000 U/min spindle taper 40 table-size 1219 x 457 mm table load 1,588 t Working speed 16,5 m/min tool piece magazine with 24 total power requirement 22,4 kW weight of the machine ca. 6,3 t dimensions of the machine ca. TBH 2,48 x3,15 x2,5 (2,9) m Well-maintained machine with only 1,603 operating hours - Includes 4th axis HAAS HRT310 Hedpfxjy Aphij Aczsnk - Includes tailstock for 4th axis - Includes Renishaw HAAS WIPS Wireless Intuitive Probing System - Includes 48 tool holders, some with tools - Includes chip conveyor - Includes internal spindle coolant - Includes programmable coolant nozzle - Includes USB interface - Includes network connection

Condition: used, Year of construction: 1996, x-travel 1020 mm y-travel 510 mm z-travel 510 mm weight of the machine ca. 9000 kg Hjdpfx Acey Apg Ejzonk

Condition: used, Year of construction: 1998, x-travel 1.020 mm y-travel 510 mm z-travel 510 mm control MSC 501 Fanuc table surface area (APC) 1.200 x 480 mm max. table load (APC) 550 kg turning speed range - milling 10.000 U/min power capacity - milling spindle 22 / 18,5 kW tool taper BT 40 Hnjdpfx Aoy Apcyjczsk number of toolpositions 30 pos. tool taper BT 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse 32 m/min feed 1 ~ 16.000 mm/min Tipp feed 0 ~ 1.260 mm/min spindle bearing diameter 85 mm total power requirement 59,5 kVA weight of the machine ca. 6,9 t dimensions of the machine ca. 3,9 x 2,7 x 2,9 m CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT included in the scope of delivery

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, coolant supply: 50 bar, The machine is designed as a 5-axis machining centre and is equipped with a swivel axis ranging from -120° to +120°, as well as a rotary table with a 360° infinitely rotating C-axis. A separate A-axis is not available. The working area features a high-quality Kessler rotary table with a diameter of 800 mm. There is no pallet changer installed. A particular highlight is the 96-position tool changer, which makes the machine ideal for series production and complex machining tasks. In combination with the integrated high-pressure coolant system (IKZ) with 50 bar, the machine is optimally suited for demanding applications in tool and mould making as well as in the automotive sector. Hsdpfx Acoy An A Eszsnk Operating Data Control ON: approx. 25,280 h Machine ON: approx. 24,730 h Program Run: approx. 9,150 h Spindle Hours: approx. 8,555 h

Condition: ready for operation (used), Year of construction: 2005, operating hours: 1,476 h, functionality: fully functional, machine/vehicle number: 174275, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Spindle speed: 12,000 rpm Number of tool changer positions: 30 Table size: 1,700 x 750 mm MACHINE DETAILS Spindle motor power: 18.5 kW Control: Mazatrol 640M Hodpfsy Am Ndex Aczenk Weight: 7,100 kg Operating hours Counter 1: 43,723 h Counter 2: 1,476 h EQUIPMENT Chip conveyor

Condition: excellent (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Chip conveyor Approx. 40 toolholders BT 50 Hnjdpfx Asy Abbhsczok

Condition: excellent (used), Year of construction: 2018, Siemens 828D control Travel (X/Y/Z): 1100 x 610 x 610 mm Table size: 1250 x 610 mm Hnsdpfjy Aba Rex Aczsk Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle cooling 3D touch probe

Condition: excellent (used), Year of construction: 1999, Yang Eagle SMV 1000 Year of manufacture: 1999 Control: - Fanuc OM - Electronic handwheel Main spindle: - max. 6000 rpm Tool changer: - 20 magazine slots Travel paths: - X-1020, Y-510, Z-510 mm Hsdpeyz R Ubefx Aczenk Table: - Clamping surface 1070 x 500 mm - Chip conveyor Availability: - Immediately or by arrangement

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0072, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,770 mm, total length: 3,950 mm, total width: 2,270 mm, table width: 560 mm, table length: 1,000 mm, table load: 1,350 kg, overall weight: 6,500 kg, spindle speed (max.): 16,000 rpm, operating hours of spindle: 2,540 h, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Mikron VCE 1000 Pro-X vertical machining center, year of manufacture 2007. Tool holder SK40, internal coolant supply, paper band filter, spindle cooling, electric probe. Hsdpjyz Dv Ssfx Aczenk If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 713/714, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller model: FANUC /SEIKOS 18Mi, spindle motor power: 8 W, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, HITACHI SEIKI Vertical Machining Center VS50, 3 axes X Y Z + 4th axis with 360,000 positions. Tool magazine: 20 SK40. Control: Fanuc / Seikos 18Mi. Hodpfx Acoyzyc Iozenk

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 Hnjdpfsyztyasx Aczek table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Condition: used, Spinner MICROTURN 52 LTBS Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles AUTOMATION READY - MC0122 Less than 300 hours No bar feed Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling Chucks etc. included Yes Coolant: used Water Based What kind of facility is it in? R and D for performance parts for injector and turbos Specifications Work Area: Swing Diameter: 23.9 in (608 mm) Turning Diameter (max): 5.9 in (150 mm) Turning Length(max): 9.8 in (250 mm) Travels: X: 23.6 in (600 mm) Z:13.8 in (350 mm) Y1 Turret: +/- 1.9 in (50 mm) Hodpfx Ajyzkdcjczjnk Y2 Milling Spindle: +/- 1.9 in (50 mm) B Rotary: 180 degrees Feedrate: Rapid Traverse X: 944.8 ipm (24 m/min) Rapid Traverse Y: 590.6 ipm (15 m/min) Rapid Traverse Z: 944.8 ipm (24 m/min) Spindle #1 Left / #2 Right: Liquid cooled motorized spindle with C-axis servo drive and encoder for synchronous machining. Spindle Bore Capacity: 52mm (2.0 in) Speed: 5,200 rpm Performance (S6 40%): 22.1 hp (16.5 kW) Torque (S6 40%): 81.1 ft-lb (110 Nm) Spindle Nose: DIN 55026-A6 B-Axis Milling Spindle: Speed (max): 12,000 rpm Performance (S6 40%): 12 hp (9 Kw) Torque (S6 40%): 15.4 ft-lbs (21 Nm) Swivel Angle: +/- 180 degrees Positional Measurement: Rotary Encoder Clamping: Hydraulic Turret: Stations: 12 / BMT45 Live Tooling Speed: 8,000 rpm Performance (S3 25%): 5.8 hp (4.3 kW) Torque (S3 25%): 10 ft-lb (13.6 Nm) Tool Magazine: Station Quantity: 72 Holder Type: HSK40 Tool Length (max): 4.1 in (105 mm) Tool Diameter (max): 3.5 in (88 mm) Tool Diameter (max) - Adj Pocket Empty: 3.9 in (100 mm) Size & Electrical: Technical design according to CE standards. Machine Dimensions: 119.3 in (3030 mm) x 111.8 in (2840 mm) x 113.8 in (2890 mm) Machine Weight: 16,976 lbs (7,700 kg) Operating Voltage: 3 x 400V (+/-10%) Main Frequency: 60 Hz (+/- 2%) Electrical connection: TN network (5-wire) Standard Equipment • 72-station tool magazine mounted on top of the machine • Hydraulic spindle brake on spindle 1 • Hydraulic spindle brake on spindle 2 • Spindle rinsing on spindle 1 (switchable between coolant or compressed air) • Spindle rinsing on spindle 2 (switchable between coolant or compressed air) • CNC Clamping Force Setting on Spindle 1 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • CNC Clamping Force Setting on Spindle 2 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • Linear tool slide with coolant supply • Signal lamp • Rear exit chip conveyor - includes feed pump rated at 5 bar at 20l/min or 3.7 bar at 83l/min • High pressure coolant system with additional 61 gallon (230 liter) tank. Maximum 319 psi (22 bar) • Renishaw tool probe for measuring tools in the X/Y/Z axis • Preparation for mist collector unit • Automatic operator door that opens at the end of the program and closes with the start. Includes necessary safety technology. Suitable for manual loading or automation access. • UNIROB universal robot interface via a common plug on the machine control cabinet with the following signals: • Safety signals (emergency stop/door signals, etc.) • Standard signals via Profinet PN bus coupler on RJ45 module. Otherwise according to the Unirob-V2021 functional description CNC Control System

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, Placing a bid obligates you to collect the item on time on 21.04.2026! Machine with only 3,275 spindle hours! TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 600 mm Travel Z-axis: 510 mm Table size: 1,300 x 600 mm T-slots: 6 (size 18) Max. table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle taper: ISO 40 / DIN 69871A Magazine: 32 stations MACHINE DETAILS Drive power: 10 / 17 kW Through-spindle coolant (IKZ): 20 bar Hnodeyzhnfspfx Aczsk Coolant tank volume: 480 l Spindle hours: 3,275 h Total machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, Immediately available. Price: €3,500, loaded free on truck. Hnsdpfx Acoyzgvnjzek