Norgatec Handelsgesellschaft mbH

Year of construction: 2004, condition: used, 2004 Design Environmental FS5250-25S Environmental Chamber with Digital Control Fodpfszty Aijx Ahaspk Ambient Temperature Range 10°-27°. Ambient Humidity Range 10%-80%. Refigerant R404A. Chamber Dimensions Approx 1,750mm x 1,500mm x 2,000mm High. With Stand Alone Compressor. S/No. A3254. Dimensions of Machine Approx 2,700mm x 1,700mm x 2,400mm. Power Supply 415 Volt, 21.9 Amp.

Year of construction: 2007, condition: used, Free-running crate transport system for a reusable glass bottle filling line. The system consists mainly of motorised chain conveyors, with some roller conveyors as well. Both straight and curved conveyor sections are included. Additional title: Crate conveyor system comprising motorised conveyor chains Capacity bottle filling line: 12000 bo/h Current: 63 A Voltage: 400 V Frequency: 50 Hz Fodpfx Ahjztyzfoaspk Operation / Control: Simatic S7-300

Condition: used, Cleaning-in-place system, completely mounted on a frame. The system consists of the following components: - 2 rectangular CIP tanks with hinged lids, each equipped with a heating coil. Gross capacity approx. 750 l and 500 l respectively. - Self-priming centrifugal pump (INOXPA, 2001, 3 kW, 15 m³/h) as CIP feed pump. - Control cabinet in housing with button panel - Various pipes, valves, actuators and sensors Additional title: Cleaning system with 2 containers Volume container 1 appr.: 750 l Volume container 2 appr.: 500 l Length: 2,20 m Fodpsztywmefx Ahaspk Width: 1,60 m Height: 1,60 m Material: CIP containers from stainless steel Base construction: mounted on frame Features: 2 CIP containers, each with heating coil; CIP feed pump; various piping; actuators; sensors; control cabinet; frame

Year of construction: 2000, condition: used, Conveyor belts for glass bottles, with 2 pressureless merges Transport with 1, 3 or 4 conveyor belts Capacity: 30,000 bottles/hour Manufacturer: Krones Year of manufacture: 2000 Additional title: Section up to filler Capacity appr.: 33000 bo/h Conveyor belt widths: 4 conveyor belts Formats: 0.33 l Vichy, 0.33 l Euro, 0.35 l lemonade, and 0.5 l NRW Operation / Control: Simatic S7-300 Fpjdpfx Ahsztybleajk Material: mainly stainless steel Position: free standing Features: conveyor frames, deflection stations, drives, frequency controls, electrical switching devices, 2 pressureless bottle merges (17/9/7/5/3/1 and 12/7/3/1 belts), automatic belt lubrication

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 32/5, Rotary screen S = 1.5 P = 0.55 kW N = 9 rpm Weight: 450 kg Fpsdpfx Aoztxw Sshaok Dimensions: 630 x 1500

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V 2. Quantity: 2 pcs. Fpsdpfoztxvnex Ahaek

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1580000152, total width: 610 mm, total height: 1,300 mm, total length: 690 mm, overall weight: 89 kg, You can find more information in the attached brochure. This is the TAC V+ GR/BK model. There are 3 air purifiers available. If all 3 are purchased, the total price is €500. Fodpfx Ahjztwfhoaepk

Condition: new, CNC 76R1 Max. capacity for steel tube (mm): 76x5 Max. capacity for stainless steel tube (mm): 76x3 Max. capacity for steel profile (mm): 60x60x3 Max. radius (CLR): 250 Min. radius (CLR): 35 Max. bending angle: 190(°) Fjdpfxjztpuno Ahajpk

Condition: new, CNC-38/R3 Max. Diameter (max. O.D.) 38 mm Max. Wall thickness 2 mm Max. Diameter (max. O.D.) for stainless steel 438 x 1.5 mm Max. Bending angle 190 (°) Hydraulic pump motor 11 kW Total motor power 22 kW Fpedpfsztpf Tox Ahask Max. Hydraulic pressure 140 (bar) Mandrel Length 3450 mm Machine Length 5850 mm Machine Weight 3000 kg

Condition: new, functionality: fully functional, Available: Heating unit for FINPRESSE 130-1-12 press plates – 18 kW, temperature up to 130°C. The machine is brand new and offered to order. Before placing an order, we confirm the current delivery time and the exact configuration of the unit. The main advantage of the unit is its independent heating and forced oil circulation system, which enables precise heating of the press's work surfaces. The 18 kW heating unit, LOWARA circulating pump, and digital temperature control ensure stable conditions during the gluing, veneering, laminating, and pressing of wood and panel components. Specifications: • Manufacturer: FINPRESSE s.a.s. • Model: 130-1-12 • Type of equipment: Mobile heating and circulation unit for press plates • Heating medium: diathermic oil / thermal oil • Power of the heating unit: 18 kW • Maximum operating temperature in configuration with LOWARA CEA80/5/D-V pump: 110°C • Digital temperature regulation and control • Power supply: 400 V • Power system: three-phase, 3F + PE • Manufacturer of circulating pump: LOWARA • Pump model: CEA80/5/D-V • Pump design: version with FKM elastomers • Pump motor rated power: 0.75 kW • Pump capacity: 30–100 l/min, i.e. approximately 1.8–6.0 m³/h • Suitable for presses with shelf lengths up to 3.0 m • Pump motor speed: approximately 2875 rpm • Pump motor protection rating: IP55 • Independent control of the circulating pump and heating unit • Pump start-up indicator • Heating start-up indicator • Indicator light for reaching the set temperature • Fault indicator for the heating unit • Main power disconnect switch • Temperature sensor for the medium • Expansion tank located above the heating system • Separate supply and return manifolds • Multi-point connections enabling connection of press plate circuits • Tray for collecting any oil leaks • Drain connection • Mobile construction on transport wheels with locking capability • Weight: approximately 200 kg Fpjdpfxoztl R Se Ahaok • Overall dimensions: approximately 140 × 45 × 240 cm (L × W × H) • Technical and operating documentation in Italian • Complies with CE requirements Applications: • Heating of work surfaces of hydraulic platen presses • Maintaining the set temperature during pressing and gluing of components • Veneering and laminating of furniture panels, MDF, plywood, and wood • Applying HPL laminates, natural veneers, and other surface materials • Pressing of furniture fronts, doors, and composite components • Stabilizing the temperature during bonding and curing of adhesives Additional information: • The equipment is offered to order • Current delivery time is confirmed before placing an order • The pictures show the offered model of the equipment in an example configuration • Maximum operating temperature depends on the pump used, seals, and type of thermal oil • Configurations designed to operate at temperatures up to 130°C • The machine is covered by a warranty under the conditions specified by the manufacturer • The price stated in the auction applies to export sales/WDT with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport with the MDD fleet or through external carriers • We help in obtaining a lease or leasing loan • Delivery costs depend on the destination and the method of transporting the equipment

Year of construction: 1990, condition: used, Erfurt press, 160-tonne capacity. Fedpfx Asztkx Iohaepk

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for the production of pellets from plant residues (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Fpsdpfx Ajztaahshajk Category: 34 Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (plant residues) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or require additional information, please do not hesitate to send us a message or call us.

Year of construction: 2023, condition: used, The "Rest Wind" machine is an electrically powered winding machine used for the controlled winding of residual materials onto a winding core. The machine is designed to collect material remnants from production or processing operations in a clean and uniform manner. The material is guided through guide rollers and wound onto the winding mandrel. The electric drive enables consistent winding at an adjustable speed. The machine features a control cabinet with start/stop function, main switch, emergency stop, and control indicators. The machine can be inspected in 06502 Thale by appointment. Fedpfjzr I Azex Ahaepk

Condition: used, functionality: limited functionality, The machine has been used very little. Fpedpfx Ajzr Iz Rjhaok

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, BEM 200 Case Former Fpjdpfxozr Ixis Ahask We offer for sale the BEM 200 Case Former. The BEM200 model is an automatic machine designed and manufactured for folding cardboard boxes and sealing their bottoms with tape. This model belongs to the mid-range/high-end category of machines and, due to its applications, covers almost all industries that use cardboard packaging.

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). Fpedpjzr Ircsfx Ahask • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: used, functionality: fully functional, The manufacturer cannot be identified with 100% certainty as there is no nameplate on the entire machine. The machine is located in 06502 Thale. Machine type: Drum melting system for 200-liter containers Material transport: Motor-driven pump Lifting system: Pneumatic Melting system: Heated pressure/melting plate with two rotating seals Control: Separate control cabinet Fpjdpezr Edpefx Ahask A detailed description/documentation of the drum melting system can be found in the appendix.

Condition: used, functionality: fully functional, machine/vehicle number: A600003888, Year of construction: 2022, operating hours: 64 h, load capacity: 227 kg, lifting height: 3,660 mm, fuel type: electric, battery voltage: 24 V, overall weight: 863 kg, Equipment: CE marking, We are offering this used SkyJack SJ 12 scissor lift, manufactured in 2022. Model number: SJ 12 Type group: 3 A Serial number: A600003888 Maximum platform height (indoor): 3.66 m Maximum platform height (outdoor): 3.66 m Capacity (indoor): 227 kg Maximum number of people (indoor): 2 people Maximum wind speed (indoor): 0.00 m/s Fedpfx Aezrzy Hshaspk Maximum manual force (indoor): 400 N Capacity (outdoor): 227 kg Maximum number of people (outdoor): 1 person Maximum wind speed (outdoor): 12.5 m/s Maximum manual force (outdoor): 200 N Machine weight: 863 kg System pressure: 207 bar Maximum tilt angle (indoor): 3.00 ° Maximum tilt angle (outdoor): 1.50 ° Voltage: 24 V Year of manufacture: 2022 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Colour: Red Empty weight: 500 kg Dimensions (LxBxH): 120 x 90 x 140 cm - Details: - └ Description: various planer blades - Documentation available: No - CE certificate present: No - Transport dimensions: 1200mm x 900mm x 1400mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fpsdpfx Aozrnwfjhaek Yorick Diebels

Condition: used, Colour: Red Fsdezrnv Ujpfx Ahaepk Empty weight: 750 kg Dimensions (LxBxH): 120 x 80 x 7 cm - Documentation available: No - CE certificate present: No - Transport dimensions: 1200mm x 800mm x 75mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1995, condition: used, functionality: fully functional, machine/vehicle number: 3521, Hot melt adhesive application machine, type ZP 9290 - Tank capacity: 90 liters - Heating power: 5.5 kW - Melting capacity: 12 kg - Electrical connection: 400 V - Wiring diagram and operating instructions / other documents are included or available Inspection possible by appointment in 06502 Thale. Fpodpfx Ahszrm Hlsaek

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Fodpfx Ahszrmigjaopk Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 2018, overall weight: 90 kg, Description: For sale: a support claw, sheet metal claw, support clamp, sheet metal gripper, material gripper. * Manufacturer: NORD-GREIF Load capacity: 2500 kg Gripping width: 250-500 mm Weight: 90 kg Year of manufacture: 2018 Type: Z 51 Serial number: 1151508 * IMPORTANT: For logistical reasons, we only sell within Europe. The buyer is responsible for collection, loading, and transport. * “The seller excludes any warranty for the purchased goods. The goods are sold in their current condition, without any guarantee of their suitability for a specific purpose or that they are free from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller assumes no liability for damage caused by the use of the goods. Any claims by the buyer against the seller are excluded.” * Date: 08/04/2026 * Fedozrmg Eopfx Ahajpk Price: €120 (negotiable) * Please do not hesitate to contact me if you have any questions or require further information.

Year of construction: 2026, condition: new, functionality: fully functional, Mobile battery charging station – Safe charging without fire hazards Visit acculaadstation.com for more information. Are you looking for a safe and flexible way to charge your traction batteries (forklifts, reach trucks, pallet trucks)? This mobile battery charging station offers the solution. Fodpfx Ahszq U H Djajpk Why this charging station? Freely movable – the station can be easily moved away from the wall and stands completely free in the space during charging. Extra fire safety – should a fire incident occur, you can easily and quickly move the station away. Cables remain intact – the charging cables never touch the ground, preventing damage to plugs and cables and extending their lifespan. Flexible configuration – place 1 conventional charger or 2 high-frequency chargers in the station. Durable finish – the steel charging station has a powder coating for a strong, scratch-resistant appearance. Available in 3 sizes. Prices on request. Free delivery within the Netherlands. What do you get? Each charging station is delivered fully assembled, including 1 balancer and 1 tensioning strap. Excluding the installation of the battery chargers. Battery is not included. Ideal for: Warehouses, distribution centers, and companies that use forklifts or other electric equipment and are looking for a safe, organized, and fire-resistant charging solution. To order, for price information, and/or for more information, please contact us via our email address.

Year of construction: 2023, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Typ / Modell: NF-LC-M 500, Type / Model: NF-LC-M 500 Laser power: 500 watts Spot mode: Multi Water-cooled Max. pulse energy (mJ): 15 Working distance / scan width: 185 – 438 mm / 105 – 300 mm 20 µm rust removal (m²/h): 13.9 20 µm oil contamination removal (m²/h): 15.3 20 µm paint / coating removal (m²/h): 10.5 5 µm galvanized sheet removal (m²/h): 2.0 Removal of surface contaminants (m²/h): 16.2 Automotive paint removal (m²/h): 2.2 Fodszq H Uaopfx Ahajpk Power consumption: 3 kW Voltage / Hz: 230 V / 50 Hz Dimensions (cm L x W x H): 95 x 61 x 103 Weight (kg): 177