FND Makina

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 20 m/min Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Pre-cutting unit Unit: Corrections Edge pre-heating lamps Glue application system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller track Number of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Motor power: 0.66 kW Max. speed: 12,000 rpm Top/bottom trimming unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunctional unit Model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Edge scraping unit Model: 08.519 Hodpoxxaucjfx Ah Uenw Glue scraping unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of operating units: 8 Adhesive system: PUR Control system: WINDOWS EQUIPMENT Programming software for the machine: ICOS open TS CE marking

Condition: excellent (used), Edge banding machine Artech Akron 420 Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing trim saws, Milling units R1, R2, Profile scraper, Hsdpexw Uzzofx Ah Usnw Condition: very good

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Hnjdpexw T Tpsfx Ah Uew Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, pre-milling unit granulate glue station pneumatic pre-cut guillotine precision saws for trimming workpiece ends milling unit with profile cutters corner milling unit profile scraper unit straight scraper unit machine length 4500 mm Year of manufacture 2013 Total feed – 87026 linear meters Hnodpfxexw T Tie Ah Usw

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Hjdpfx Ahsxw T H No Uenw Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Hnsdoxw Tugjpfx Ah Ujw Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Hnedsxw Ttvspfx Ah Usw Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, feed rate X-axis: 11 m/min, edge thickness (max.): 3 mm, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Hnjdpfxoxw Tngo Ah Ujw Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking

Condition: excellent (used), Year of construction: 2019, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 0261973988, Equipment: ABS, type plate available, Year of manufacture: 2019 Equipment and technical data: Processing dimensions Workpiece thickness: 8–60 mm Workpiece width: from 70 mm Edgeband height: up to 8 mm Edgeband thickness (coil material): up to 3 mm Feed Speed adjustable from 8 to 14 m/min, stepless adjustment Hnedpsxw Nwksfx Ah Ujw Gluing technology Gluing system for granulate Glue tank below the feed zone Interchangeable HOMAG glue tank Suitable for EVA and PUR processing Quick-change function Units Milling unit Preheating zone Pressure station Flush/radius/chamfer trimming station Scrapers: profile and flat Additional equipment and operation PU pressure rollers HOMAG powerTouch control panel Right-hand machine version CE compliant Dimensions: approx. 3900 x 950 x 1,150 mm Weight: approx. 2,000 kg Availability: immediately

Condition: used, Year of construction: 2008, functionality: fully functional, Type: Edgebander - single sided Manufacturer: BRANDT Model: Optimat KDF 550 C Year: 2008 Hedpexwwb Refx Ah Usnw Location: Lithuania Terms: as-is where-is Board thickness 60 mm Edge thickness 8 mm Feed advance 11 m/min Length x width x height 5860.0 × 1560.0 × 230.0 Weight 2600 kg Feed speed: 11 m/min Workpiece thickness: 8 – 60 mm / edge thickness: 0.4 – 8 mm / working height: 950 mm Electricity supply: 400 v – 3 phase – 50 hz / pneumatic pressure: 6 bar / noise emission level: 80…87 db(a) Extraction diameter: 1 × 120 mm / 2 × 100 mm / roll separation: max. 3. 0 × 45 mm / 0. 8 × 65 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support Hnodpfxexwurye Ah Ujw - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220.01.016.22, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Hnedjxwt Nqjpfx Ah Ujw Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: excellent (used), It is in perfect working condition, looks very good and has few operating hours. It has pre-milling, circular saw cutting, up and down milling, radius tickling, surface tickling, and polish. Hnjdpfxsxwqmas Ah Ujw

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Hnsdexwhtwopfx Ah Ujw

Condition: like new (used), functionality: fully functional, Edgebanding machine for curves, as new Hnedpfexwd Abox Ah Uow

Condition: used, Year of construction: 1996, Plate running direction: from operator to the left Max. edge thickness: 8.0 mm Min. workpiece width: 70 mm Feed speed: 11 m/min Heating-up time: 4.5 min Automatic roll magazine: Yes Cutting shears up to: 0.2 - 3.0 mm Individual edge feed: Yes Automatic gluing: Glue pot with granulate on top Cut-off saw: fixed at 90° Flush-milling unit: Yes Combination milling unit: Yes Aggregate display: glue display Control type: manual Operation: selector switch / push buttons Travel device: Yes Protective hood: Yes Working height or infeed table height: 870 mm Approx. weight: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction diameter: 120 mm Storage location: Supplier Hnodpfx Ahexwdp Us Uew

Condition: excellent (used), Year of construction: 2018, Edge banding machine Manufacturer: Felder Model: G360 Year of manufacture: 2018 Hodpfx Ahjxwb Iuo Uonw Operating hours: approx. 673 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed speed: 8 m/min Total power: 5.5 kW Overall length: approx. 3,200 mm Jointing unit: Yes End trimming unit: Yes Flush trimming unit: Yes Surface scraper: Yes

Condition: excellent (used), Year of construction: 2004, used Hebrock edge banding machine model top 2000 year of manufacture 2004 with hot melt adhesive application to the workpiece for edge material up to 3 mm, maintenance-free glue pot, HF end trimming station (18,000 rpm) HF milling station (18,000 rpm) with replaceable insert cutter (combination version), feed rate approx. 10 m/min Hnsdpjxvqrmofx Ah Uew extendable workpiece support length approx. 3100 mm

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Hnodpjxvirfjfx Ah Uew Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Edgebander SCM K360 R HP Fluids Pre-milling cutters, Glue application by roller, Interchangeable glue tank Additional glue tank Pneumatic pre-cut guillotine, Fluids End trimming saws angle-adjustable for finishing Top/bottom milling unit (multi-cutter R1-R2), Hnjdpfexva Tmjx Ah Uew Corner rounding unit, Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine features NC cutter control and pneumatic package, Max workpiece height 60 mm, Max edge thickness in roll 3 mm, Feed speed max 11 m/min, Machine in very good condition. Original mileage: 65,000 meters

Condition: good (used), Year of construction: 2007, functionality: fully functional, Edgebander Kuper Optimat KDF 660 – used, ready for demonstration The used edgebander Kuper Optimat KDF 660 is in good condition and is currently under power, allowing for an on-site demonstration. Details: Model: Kuper Optimat KDF 660 Hnjdpfx Ahoxu Iafo Uow Condition: used, functional The machine is connected and can be tested Service: Removal and loading of the machine can be organized upon request. If interested or to arrange a viewing, please feel free to contact us!

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: limited functionality, Machine was fully working condition in 2021. Then dismantled and stored in warehouse. LEFT side Hnodpfx Aoxu H S Tsh Usw

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Hnodpfxexu E Nwo Ah Ujw Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: ready for operation (used), Year of construction: 2006, This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine. Application Types Edge Banding Hodpfx Aexuw Dash Uonw

Condition: used, Year of construction: 2006, Used, in excellent condition Make: Hebrock Hedsxuv Rfepfx Ah Uonw Model: top 2000 Year of manufacture: 2006 Machine no.: 6487 Edge thickness: 0.5 mm - 3 mm Workpiece height: min. 10 mm, max. 45 mm Workpiece width: min. 90 mm Feed: 10 m/min Cutting from roll Cut-off unit Flush and radius milling Mobile Extraction connection D 100 mm Space requirement approx. 3100 mm x 1320 mm x 1300 mm Weight approx. 550 kg Total connected load: 15.75 A / 7.27 kW Location: 97447 Gerolzhofen, loaded free, unpacked Offered as seen and inspected, without guarantee or warranty