Auto Trade D.O.O.

Condition: used, Technical details: x-travel: 760 mm Prodpfx Agjxrwpde Hsc y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 4800 mm Measurements depth 5800 mm Machine weight 12800 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 10000 Spindle motor power 24 kW Number of axis 4 Prsdpfx Ajxrwfrsg Hsc Movement X-Axis Movement 625 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 650 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 650 mm Z-Axis Rapid Traverse 40 m/min Table Table load 4000 kg Tools Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69893-HSK-A63 Media Chip conveyor Yes Additional Equipment Renichaw measuring probe Tool breakage detection: Yes, in tool magazine Flushing gun at the setup station Waterfall shower Paper belt filter Pallet sequential operation Enclosed work area enclosure according to UW Computer connection via Ethernet interface Network connection This 4-axis Starrag Heckert Dynamic CWK 400D was manufactured in 2005. It features a Siemens Sinumerik 840D control system, spindle speeds up to 10,000 rpm, and a dual pallet system with rapid 8-second pallet changes. The machine includes a tool magazine with 60 positions and a high-capacity coolant system. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,804 h, General Data Measurements width 7000 Measurements depth 5000 mm Machine weight 3400 kg Control Unit Brand SIEMENS Model Sinumerik 840D Predpfx Agexrwfxe Hsc Main Drive Spindle speed range 8000 Number of axis 4 Movement X-Axis Working Feed 60000 mm/min X-Axis Rapid Traverse 60 m/min Y-Axis Working Feed 60000 mm/min Y-Axis Rapid Traverse 60 m/min Z-Axis Working Feed 60000 mm/min Z-Axis Rapid Traverse 60 m/min X-Axis Movement 600 mm Y-Axis Movement 560 mm Z-Axis Movement 560 mm Table Table load 350 kg Tools Slots in storage 90 Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69871-SK40 Media Chip conveyor Yes Additional Equipment Coolant Type/Content: Emulsion (internal & external) / approx. 1100L Coolant Unit: Knoll with drum filter 30, 40, 50 bar via M-command Machine Accuracy: VDI / DGQ 3441 Renishaw Measuring Probe Tool Breakage Detection Drum filter Pallet Sequential Operation Enclosed Work Area Enclosure Network Connection Technical Documents and Layout Plan available This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2013, Pallet Changer: -> included Spindle: -> Tool holder HSK63 -> Speed 20,000 rpm Linear Axes: -> X-axis 750 mm Psdpfx Aoxrlzheg Hsrc -> Y-axis 750 mm -> Z-axis 725 mm Tool Changer: -> 60 stations This Machine comes with a Coolant Filtration System with Chiller • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Type: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of Manufacture: 2012 • Serial Numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical Connection: 3×400 V / 50 Hz • Control Voltage: 24 V DC • Power Consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse Protection: 16 / 25 A (Knoll), 16 A (Hyfra) • Cooling Capacity (Chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. Pressure: 20 bar • Weight (with coolant): 140 kg Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot) Spindle Hours approx. 9.300 Working Hours approx. 45.500

Condition: good (used), Year of construction: 2005, MACHINE SPECIFICATIONS CNC controller: MSX-501 axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis degrees: 360º (0.001º index) Feed rates m/min: 50 Rapid traverse m/min: 50 Cywiwxaofe Prsdpjxq Hcwofx Ag Hjc Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 14,000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-50 Tool magazine slots: SK50 Equipment chip conveyor signal lamp high pressure pump Internal coolant supply

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Prjdpfxsxqt Tie Ag Hec

Condition: ready for operation (used), Year of construction: 2008, Control Unit Predpfx Ajxqtcqsg Hjc Brand FANUC Model 16 i MB Movement X-Axis Rapid Traverse 50 m/min Y-Axis Rapid Traverse 50 m/min Z-Axis Rapid Traverse 50 m/min X-Axis Movement 735 mm Y-Axis Movement 610 mm Z-Axis Movement 610 mm This Kitamura HX500 ia was manufactured in 2008. It features X-Y-Z Axis Travels of 735, 610, and 610 mm, a table size of 500x500 mm, and a spindle speed of 13,000 rpm. The machine includes a BT40 spindle mount, a 50-position tool changer, and a FANUC 16 i MB control system with a 10.4" color LCD. Consider the opportunity to buy this Kitamura HX500 ia horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement. Prsdpoxqrvvsfx Ag Hsc

Condition: used, Year of construction: 2002, Operating hours: 74,350 h Technical data: Travel distances: X-axis (column right/left): 700 mm Y-axis (spindle up/down): 800 mm Z-axis (table): 700 mm Distance spindle nose to table: 50 - 850 mm Distance spindle end to table center: 150 - 850 mm Table size: 500 x 500 mm Max. workpiece weight: 800 kg Spindle: Spindle speed range, steplessly variable: 50 - 5,000 rpm Taper: SK 50 Spindle diameter: 100 mm Feed rate: Rapid traverse (X, Y, Z axes): 30,000 mm/min Prsdpfjxqqwrsx Ag Hjc Tool magazine capacity: 40 tools Tool diameter: Without tools in adjacent stations: ø 140 mm With tools in adjacent stations: ø 240 mm Tool length: 450 mm Tool weight: 28 kg Power consumption, max.: 45 kVA Weight, approx.: 21,000 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 12,976 h, functionality: fully functional, machine/vehicle number: NSO997, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller model: FANUC Series 30i, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Z-axis): 800 mm Travel (Y-axis): 850 mm Magazine Positions: 120 Spindle Speed Range: 50–15,000 rpm Spindle Diameter (Front Bearing I.D.): 80 mm Spindle Taper: ISO R297 / Taper No. 40 Tool Holder: MAS I Type P40T Table Pallet Size: 550 × 550 mm Max. Rotary Table Swivel Range: 360° Pallet Height: 750 mm Distances Distance Between Spindle Nose and Table Center: 150–1,000 mm Distance Between Spindle Nose and Table Surface: 50–850 mm Feed Rates Rapid Traverse X-, Y-, Z-Axis: 60,000 mm/min Cutting Feed Rate (X-, Y-, Z-Axis): 0.001–30 mm/min Tool Changer (ATC) Number of Tools: 40 Tool Size (Ø × Length): Ø75 × 470 mm Tool Weight: 8.0 kg Tool Change Time (Tool to Tool): 1.3 s Performance Data Positioning Accuracy (X-, Y-, Z-Axis): ±0.003 mm Repeatability (X-, Y-, Z-Axis): ±0.0015 mm Predjxqmbgepfx Ag Hec Pallet Load Capacity: 800 kg Thrust Force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Footprint: 2,750 × 5,700 mm Machine Weight: 16,000 kg Motors Spindle Drive Motor (15 min rated power): 22 / 18.5 kW Hydraulic Pump Motor: 3.7 (4) kW Operating Hours Machine Running Hours: 12,976 h Control Powered Hours: 112,997 h

Condition: used, Year of construction: 2014, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 15425059064, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, 3-axis vertical machining center - HEIDENHAIN iTNC 530 - 20-position tool changer - Tool holder SK40 - Chip conveyor on the left - Direct measuring system on X, Y, Z axes Predpfsxp N Duox Ag Hoc

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 4500 mm Measurements depth 2900 mm Measurements height 3428 mm Machine weight 14000 kg Main Drive Number of axis 4 Prodpfsxpyukex Ag Hoc Movement X-Axis Movement 630 Y-Axis Movement 600 Z-Axis Movement 650 Additional Equipment Tool Storage: 40 pcs This 4-axis MORI SEIKI SH-50 was manufactured in 1997. A reliable horizontal machining centre, it offers robust construction and precision engineering. Ideal for complex machining tasks, this unit has maintained consistent performance over the years. Consider the opportunity to buy this MORI SEIKI SH-50 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, OKK HM 40 , 400mm HMC, (8) Pallets, serial number 378 MA74294, 16 i M Fanuc Control, BT 40 Spindle, 20,000 RPM, 120 ATC, B axis, Through Spindle Coolant, Coolant & Chiller, NEW 2001. Predpfx Aoxpxp Hjg Hoc

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements height 2803 mm Machine weight 11300 kg Podpfoxpkl Hex Ag Horc Control Unit Brand SIEMENS Model 840D Main Drive Spindle speed range 12000 rpm Spindle motor power 15 / 11 kW Movement X-Axis Movement 730 Y-Axis Movement 730 Z-Axis Movement 880 Additional Equipment Tool Magazine Capacity: 40 pockets (wheel type) / Tool Diameter (Occupied Neighboring Pockets): 70 mm / Tool Diameter (Free Neighboring Pockets): 170 mm Maximum Tool Length: 450 mm / Maximum Tool Weight: 12 kg / Chip-to-Chip Time: min. 3.3 sec / max. 8.2 sec Pallet Change Time: 9.5 sec Footprint (Including Chip Conveyors): approx. 12.5 m² This 4-axis MORI SEIKI NHX 5000 was manufactured in 2012. Ideal for precision machining, this horizontal machining centre ensures reliable performance. Consider the opportunity to buy this MORI SEIKI NHX 5000 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, BASIC DATA Condition: Very good Availability: 01/2025 Machine model: DMG NHX 4000 Year of manufacture: 2017 Operating hours: 41,220 h Spindle hours: 21,663 h Working area: X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 660 mm TRANSPORT WEIGHT AND DIMENSIONS Transport weight Machine incl. tool magazine and chip conveyor: 9,300 kg Coolant unit KF 110/700: 1,500 kg Chiller unit: approx. 82 kg Sheet metal parts: 125 kg Documentation and accessories: 60 kg Transport dimensions of the machine incl. tool magazine: Length x Width x Height: 4.20 m x 3.20 m x 2.80 m SPINDLE INFORMATION Spindle specification Spindle type: SK004 motor spindle speedMASTER® HSK-A63 Spindle speed: 20–20,000 rpm Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle) Torque: 130 Nm (40%), 86 Nm (100%) Workpiece weight per pallet: max. 400 kg Pallet size: 400 x 400 mm Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm TOOL CLAMPING SYSTEM AND TOOL CHANGER Tool holder: HSK-A63 Standard: DIN 69893 Form A Clamping mechanism: Clamping: Mechanically by spring force Unclamping: Hydraulically Tool changer: Capacity: 40 tools (ring magazine system) Max. tool diameter: 70 mm (adjacent pockets free), 170 mm (adjacent pockets occupied) Max. tool length: 450 mm Max. tool weight: 12 kg Optional tool changer: Ring tool magazine with 60 pockets (HSK-A63) POWER SUPPLY Voltage: TN-S system, 400 V Power consumption (at 100% duty cycle): Base machine: 45 kVA Coolant unit: 48 kVA Band filter unit: 55 kVA Mains connection rating for Siemens Sinamics S120 16 kW: 0.48 MVA 36 kW: 1.08 MVA 55 kW: 1.65 MVA 80 kW: 2.40 MVA 120 kW: 3.60 MVA COOLING SYSTEM AND CHIP DISPOSAL Coolant: Water-soluble coolant Interface for high-pressure coolant system: Up to 70 bar, compatible with Knoll systems Coolant flushing system: Includes cleaning guns Additional components: Rotating inspection window on the work area door Coolant flushing system for cleaning the machine interior Upgraded cooling system: Larger Bürner filter unit (DMG upgrade, see attachment) MEASUREMENT AND MONITORING SYSTEMS Prodpfxoxn Adle Ag Hsc Tool breakage control system in tool magazine Spindle sensor measurement system with Renishaw OMP60 for automatic measurement and centering CONTROL SYSTEM CNC: CELOS® with Siemens 840D sl Operate Control panel: 21.5" ERGOline® Control with multi-touch display Functions: Apps for simplified machine operation as well as for comprehensive management, documentation, and visualization of order, process, and machine data. Networking with CAD/CAM and compatibility with PPS/ERP systems. WORKTABLE NC table: With direct drive technology Minimum indexing: 0.001° Max. rotational speed: 100 rpm DOCUMENTATION AND ADDITIONAL FEATURES Electrical schematics and user manuals in German Languages: Screen texts available in German and English CELOS products DMG MORI NETSERVICE for remote diagnosis SERVICE AGENT for maintenance monitoring MESSENGER for real-time machine status

Condition: ready for operation (used), Year of construction: 2008, operating hours: 15,289 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 121, TECHNICAL DETAILS Travel Paths X-axis travel: 750 mm Y-axis travel: 800 mm Z-axis travel: 850 mm Work Table (axis operated by AC servo motor) Pallet size: 550 x 550 mm Smallest indexing increment: 0.001 degrees Spindle Tool taper: #50 Drive power: 30/22 kW Spindle speed: 15,000 rpm Predjxnwq Hopfx Ag Hec Tool Magazine Tool stations: 121 tools Magazine type: Chain magazine Specification: BT-50 MACHINE DETAILS Control: FANUC 31i Installation dimensions (L × W × H): approx. 2,780 × 1,500 × 2,300 mm Operating Hours Running time: 15,289 h Control On-Time: 106,856 h EQUIPMENT Coolant system Renishaw infrared tool probe OMP 60 BT 50

Condition: excellent (used), Year of construction: 2022, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate Y-axis: 6 m/min, nominal power (apparent): 40 kVA, torque: 200 Nm, controller manufacturer: Fanuc, controller model: OiMF, total height: 3,070 mm, total length: 4,580 mm, total width: 2,720 mm, table load: 500 kg, rotational speed (min.): 40 rpm, rotational speed (max.): 15,000 rpm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 8,500 h, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 400 mm, tool weight: 8,000 g, input voltage: 220 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained Wele HMC500 for sale. The machine was professionally serviced and dismantled by the JTEKT/Wele factory service team in week 48. The machine is packed and ready for collection; commissioning by JTEKT/Wele can be arranged at additional cost. Prjdpfx Aoxnvpzsg Hjc Control on: approx. 25,000 hours Machine on: approx. 25,000 hours Program run time: approx. 8,500 hours Spindle on: approx. 8,500 hours Drive on: approx. 8,500 hours Axes in motion: approx. 8,500 hours Includes: - Measuring probe - 4 SK40 tool holders (1 measuring probe, 3 tool holders with tools) The machine was exclusively used for machining aluminium. Machine package includes: - 2 pallets with pallet changer (500 x 500 mm) - Table rotation: 0.001° - 2 pallet towers, each with 4 sides and 3 universal clamps per side by Lang Quick Point - Chip conveyor and chip trolley included - Coolant tank (500 litres) and oil skimmer included Feed rates: 20/60 m/min Spindle speed: 40–15,000 rpm Motor power: 18.5/22 kW Frequency inverter included

Condition: used, Year of construction: 2017, Machine Description for 2017 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Co. Ltd. Type / Model: NHX 5000_M730UM, Series J-NHX5000-C_C01 Year of Manufacture: 2016 Prsdjxnkgnspfx Ag Hjc Control System: MAPPS M730UM with CELOS / 21.5" ERGOline Touch Technical Data: • Working Area / Travel: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Max. workpiece diameter: 800 mm - Max. workpiece height: 1,000 mm - Distance spindle center to pallet surface: 80 – 810 mm - Distance pallet center to spindle reference plane: 70 – 950 mm - Pallet load: 500 kg [optional 700 kg] - Number of pallets: 2 - Minimum table indexing angle: 1° [optional 0.001° rotary table] • Performance / Spindle Speed / Drive Power: - Spindle type: speedMASTER® motor spindle - Spindle speed range: 35 – 15,000 rpm - Power: 30.7 / 26 / 18.5 kW (15% ED / 30 min / continuous) - Torque: 207 / 95.5 Nm (10% / 100% duty cycle) - Tool taper: BT40 / #40 - Tool magazine capacity: 40 tools [optional: 60 / 120 / 180 / 240] - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Tool change time (chip-to-chip): 2.5 s - Rapid traverse X/Y/Z: 60 m/min - Feedrate range: 0 – 60,000 mm/min - Acceleration: 1 G • Weight / Dimensions / Electrical Connection: - Machine weight (incl. coolant tank): approx. 12,000 kg - Installation footprint (W × L): 3,078 × 4,784 mm - Overall height: 2,852 mm - Coolant tank capacity: 800 L - Power supply: 37.3 kVA - Compressed air: 0.5 MPa / 420 L/min Equipment / Accessories: - NC rotary table with 0.001° indexing (DDM optional) - Automatic 2-pallet changer (rotary APC) - Two pallets with threaded holes and hydraulic fixture interface - Chip conveyor (rear discharge) - Direct measuring systems on X/Y/Z axes - Renishaw OMP60 spindle probe system - Tool breakage monitoring in the magazine - High-pressure coolant interface (70 bar, Knoll) - Coolant/air switching device for through-spindle supply - Rotating inspection window - Coolant gun - Oil mist separator interface Ø200 mm (LTA AC3002 optional) - Automatic loading station door - Signal tower (red/yellow/green/blue) - Portable manual pulse generator (handwheel) - Air filter unit for clean compressed air supply - 45 kVA transformer - Knoll KF110/700 high-pressure coolant unit (7.0 MPa, 31 L/min) - Three hydraulic clamping towers with double-jaw chucks - CELOS system with apps (Production, Accessories, Support, Monitoring, Configuration) - MAPPS M730UM control with 21.5" touchscreen and 15.6" sub-display - SmartKey® operator access management This technical description follows industry standards for horizontal machining center listings, ensuring clarity for prospective buyers on leading platforms such as Machineseeker.

Condition: used, Year of construction: 2021, Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Pallet quantity: 2 (with threaded holes) - Minimum B-axis indexing angle: 0.001° (DD direct drive) - Max. rotary table speed: 100 rpm - Pallet load: 500 kg - Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) Predpfx Agjxnkdmj Hec - Automatic indexing setup station • Performance / Spindle Speed / Drive Power: - Spindle: speedMASTER® motor spindle - Speed range: 35 – 20,000 rpm - Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) - Torque: 221 / 107 / 86.8 Nm - Tool taper: SK40 (7/24 taper, face contact) - Tool magazine capacity: 60 tools (ring-type, random selection) - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Chip conveyor: rear discharge with drum filter - Through-spindle coolant interface (8-step pressure control, up to 7 MPa) - Coolant / air switching via spindle - External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: - Machine weight: approx. 12,000 kg - Coolant tank capacity: 800 L - Transformer: 54 kVA - Power supply: 400 V, 50 Hz Equipment / Accessories: - Renishaw OMP60 spindle probe system (optical transmission) - Tool breakage detection system in the magazine - Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) - Automatic door for setup station - Rotating inspection window (air-driven) - Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) - INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) - EtherNet/IP robot interface - IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger - CELOS with touchscreen and MAPPS functionality - Four-color signal light tower - Handheld control device (mobile handwheel) - Central coolant preparation for through-spindle supply - Drain circuit for auto-coupler (to prevent pressure drop) - 10 programmable external M-codes - 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) - Voltage: 400 V, 50 Hz configuration - Air filter unit (T105A-1000MSP) This summary uses industry-standard terminology and structure suitable for platforms such as Machineseeker or TruckScout24.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,447 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, table width: 500 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the set timeframe from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 24 m/min Table width: 500 mm Table length: 500 mm Table load capacity: 400 kg Pedpfx Ajxm Up Dsg Horc MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,445 x 3,055 x 2,200 mm Total weight: 7,000 kg Spindle hours: 2,447 h EQUIPMENT Automatic pallet changer 4-axis version incl. B-axis (table rotation)

Condition: used, Year of construction: 2021, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: SIEMENS, controller model: 840 D CELOS, table width: 500 mm, table length: 500 mm, spindle speed (max.): 15,000 rpm, CONTROLS .. CNC controls SIEMENS 840 D CELOS WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. X-axis travel: 730 mm .. Y-axis travel: 730 mm .. Z-axis travel: 880 mm .. rotating range B-axis from: 0 ° .. rotating range B-axis up to: 90 ° TABLE .. table surface (left-right): 500 mm .. table surface (front-back): 500 mm .. workpiece load (max): 500 kg SPINDLE / HEAD .. spindle revolutions (max): 15000 /min .. tool fixture: ISO BT 40 .. drive power: 37.7 kW AXIS DRIVES .. traverse velocity X (max): 5000 mm/min .. traverse velocity Y (max): 5000 mm/min .. traverse velocity Z (max): 5000 mm/min .. rapid traverse X: 60000 mm/min .. rapid traverse Y: 60000 mm/min .. rapid traverse Z: 60000 mm/min TOOL MAGAZINE .. magazin type: disc magazine .. number of positions: 40 .. tool diameter max.: 70 mm .. - with free neighbour positions: 170 mm .. tool length max.: 550 mm .. tool weight max.: 12 kg .. tool changing time: 2.5 s AUTOMATIC WORKLOAD EQUIPMENT Podsxm Rvmjpfx Ag Herc .. number of store positions: 2 .. Workpiece diameter max.: 800 mm .. workpiece height (max): 1000 mm .. pallet length: 500 mm .. pallet width: 500 mm .. number of pallets: 2 ELECTRICAL SPECIFICATIONS .. mains power supply: 37.3 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4784 mm .. space requirements -front/back-: 3078 mm .. total height: 2852 mm .. total weight approx.: 12000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. closed cabin: yes .. European CE standards: yes Accessories - Chip conveyor

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4710 mm Measurements depth 2700 mm Measurements height 2864 mm Machine weight 11500 kg Main Drive Spindle speed range 50 to 15000 Tool taper SK40 Number of axis 4 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 760 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 60 m/min Table Table load 500 kg Psdpfx Agsxmbw Is Hsrc Tools Max weight 10 kg Max tool diameter 70 / 150 mm Max tool length 300–450 mm This 4-axis Okuma MB 5000H was manufactured in 2011. It features a robust horizontal machining center design with a 500 × 500 mm pallet size, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min⁻¹ with a SK40 taper, enhancing its versatility. Additional features include a chip conveyor, shower system, and provision for a Renishaw probe. If you are looking to get high-quality milling capabilities consider the Okuma MB 5000H machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements height 2864 mm Machine weight 11500 kg Main Drive Spindle speed range 50–15,000 Tool taper SK40 Number of axis 4 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 760 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 60 m/min Tools Prjdpfx Agexmbwnj Hjc Max weight 10 kg Max tool diameter 70 mm / 150 mm Max tool length 300–450 mm Type of tool holder BT40 This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, overall weight: 11,500 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 40, mount diameter: 40 mm, CNC Fanuc 16i - MB TABLE Table size: mm 400 x 400 Max workable piece: mm Ø 630 x 745 Max load allowed on the table: kg 350 TRAVELS X-axis travel: mm 610 Y-axis travel: mm 610 Z-axis travel: mm 610 4th axis (rotary table): degrees 0.001 - 360 Distance from table surface to spindle center: mm 40 – 650 Distance from table center to spindle nose: mm 100 - 710 SPINDLE Spindle taper: BT 40 Psdpfexk S Ulsx Ag Hjrc Standard spindle rotation speed: rpm 20.000 Automatic selection ranges: No. 4 Maximum torque: Nm 157 FEEDS Rapid feeds (X, Y, Z axes): mm/min 50.000 Working feed (X, Y, Z axes): mm/min 50.000 Fast feed 4th axis (B): rpm 125 90° indexing: sec 0,64 AUTOMATIC TOOL CHANGE Tool magazine capacity: No. 40 Tool management: coded position Tool search: Random Maximum tool dimensions: mm Ø 95 x 370 With adjacent free positions in the magazine: mm Ø 150 x 370 Maximum tool weight: kg 10 MACHINE DATA Floor space requirement: mm 3.524 x 3.604 Machine height: mm 2.920 Machine weight: kg 11.500 Machine complete with: • 4 simultaneous axes continuous table B-axis • Pallet changer with 2 pallets 400 x 400 • Manually rotating loading / unloading station 4 x 90 • BT 40 tool holder • Internal water supply coolant system at 30 bar • Spindle air blower • Double contact surface spindle (Big – Plus) • Rigid tapping • Front Dual Deck chip conveyor • Remote electronic handwheel • Drilled screws cooled with closed circuit oil • Advanced intelligent control, constant thermal distortion less than 5 μm • Nano contouring control • Laser control for tool integrity • Hydraulic control unit for piece locking at 210 Bar • Complete hydraulic system for managing two high pressure oil veins A+B on both pallets • Instruction manuals and CE declaration

Condition: new, Year of construction: 2024, functionality: fully functional, Incorrect investment by a corporation. Machine is new and unused (already delivered). The machine is available immediately with no lead time. An extremely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: fully closed loop scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optional 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: direct drive Minimum index: 0.001° Maximum speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: central spindle cooling Internal coolant: optional CTS 7 MPa Tool magazine: chain-type, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [for >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment / Options: Pedpfx Agsxizdao Hjrc - Workpiece probe - Tool measurement - Laser control (optional) - High-pressure coolant 7 MPa (optional) - Chip conveyor - Fully enclosed enclosure with roof Dimensions n.a. Weight n.a. Connection data n.a.