Evelin Szakal Consulting

Condition: used, This listing is for a Sartorius Tare CPA34001S Analytical Balance The unit is in full working condition and is ready for immediate release. This model offers a weighing capacity of up to ~34,000 g (34 kg) with a readability of 0.1 g. It includes an automatic internal calibration (isoCAL) function, allowing the balance to self-calibrate at set intervals to maintain accuracy. The weigh cell is described as “monolithic weigh cell technology” which gives stability, precision and durability. Large weigh pan: e.g., specification documents list a pan size of 400 × 300 mm for this model. The housing is designed to be robust and chemical-resistant for tough lab environments. Psdpfsxrt N Hex Ag Horc Interface: it supports RS-232C / V24‐V28 serial interface for data logging, printing, external systems. Fast response time: average response stated < 2 s in one specification sheet. Tare function: full subtractive tare up to 100% of capacity is supported. Technical Specifications (typical) Based on the manual and spec sheet for this model: Capacity (Max): 34,000 g (34 kg) Scale interval (d): 0.1 g Linearity: ±0.2 g (typical) Repeatability (standard deviation): ≤ 0.1 g Pan size: ~400 × 300 mm Dimensions (W × D × H): ~313 × 532 × 120 mm Typical response time: ≤ 2 s Operating ambient temperature with isoCAL: 0 °C to 40 °C; without: +10 °C to +30 °C (from manual) Interface: RS-232C serial, 7-bit, various parity, 150-19200 baud. Applications & Use-Case Given its capacity (34 kg) and readability (0.1 g), this balance is suited for large-capacity analytical weighing rather than ultra-fine micro-weighing. Typical uses could include: Weighing bulk samples, large containers or vessels (e.g., large drums, tanks) where still a good accuracy of 0.1 g is required. Industrial laboratories, QA/QC, production where large items must be weighed with decent precision. Situations where the weighing pan size needs to accommodate large items (400×300 mm is relatively large). Environments where interface to computer/printer is needed for logging and traceability. Where regular internal calibration is a benefit to maintain accuracy over time without frequent manual external weight calibration.

Condition: used, This listing is for 1 of 3 Sartorius Practum513-1S Laboratory Balances The unit is in full working condition and is ready for immediate release. The Practum series is described by Sartorius as offering “best value for your money, without compromises in precision and reliability.” The model 513‑1S is one of the higher‑capacity versions of the Practum range: a capacity of 510 g, with a readability (resolution) of 0.001 g (i.e., ±1 mg) for that capacity. It uses the typical features of the Practum line: rugged housing (aluminium die‑cast base and ABS housing) and technology built for standard applications. Connectivity: has a Mini‑USB interface for outputting data to a PC or compatible printer. Weigh‑below hook capability (for e.g., hanging weights beneath the balance) is supported. A front level bubble and adjustable feet support easy leveling, which improves accuracy and repeatability. Pedpfxexrt Nts Ag Hsrc Mechanical overload protection is built in to help ensure durability. The Practum 513‑1S is well‑suited for standard analytical/precision weighing tasks in laboratories where you need to weigh up to ~ 510 g with 1 mg resolution. Typical use‑cases: formulation work, general sample weighing, quality control, density determination, routine laboratory tasks. The documentation mentions modes like counting, percent weighing, averaging and “unstable conditions” for the broader series. Because of its resolution and capacity, it's a good fit when you don’t need ultra‑fine microgram resolution but need relatively high capacity with milligram resolution.

Condition: used, System Overview A complete, cGMP-compliant Water for Injection (WFI) generation and storage system. Produces high-purity, endotoxin-free water for pharmaceutical and biotech applications via multiple-effect distillation. ----- Main Components - Finn-Aqua 200-S3 Distillation Unit – three-effect evaporator/condensers with falling-film design, pyrogen separation, and continuous blowdown. - 600 L WFI Storage Tank – 316L stainless steel, atmospheric vent filter, level and temperature sensors. - 600 L Jacketed Holding Tank – 316L stainless steel, insulated, steam/hot water jacket for temperature control. - WFI Distribution Pump – sanitary centrifugal pump for loop circulation. - Utility Connections – plant steam (3–8 bar), cooling water, feed water, condensate return, and instrument air. - Instrumentation – pressure, temperature, conductivity, and level transmitters with safety and relief valves. - Control Panel – PLC-based automatic operation, alarm handling, data logging, and local/remote control. ----- Key Features - Multi-effect distillation for high purity and energy efficiency. - Degassing and three-stage separation for endotoxin removal. Prjdpjxqq Dxsfx Ag Hoc - Fully stainless, drainable, and sanitary construction. - Compact, skid-mounted design with integrated utilities. - Designed for validation and GMP compliance (USP/EP WFI quality).

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Podpfexqqyyox Ag Hjrc Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case

Condition: used, This listing is for a Belimed PST 9-6-12 HS1 Steam Sterilizer. The unit is in excellent working condition and is ready for immediate release. The Belimed PST 9-6-12 HS1 is a top-of-the-line pharmaceutical autoclave designed for saturated steam sterilization of laboratory and production equipment, including heat- and moisture-stable porous and non-porous loads. This advanced stainless steel sterilizer supports the 6050 and 6065 sterilization processes with integrated Filter Integrity System (FIS), ensuring reliable sterilization and validation compliance in regulated environments. Engineered by Belimed Life Science and manufactured in Germany, this system delivers high process reliability, precise temperature control, and full compliance with GMP/cGMP standards, making it ideal for use in research, pilot, and GMP production settings. This HS1 configuration features a single-door chamber, water-jacket cooling, vacuum-assisted drying, and a user-friendly B-Touch interface with integrated process control. It is optimized for efficient sterilization cycles with minimal operator intervention. Key Features GMP-ready design supporting pharmaceutical-grade sterilization processes (6050/6065) Integrated Filter Integrity System (FIS) for monitoring and verifying sterilization filter integrity User-friendly B-Touch touchscreen interface with Siemens WinCC Unified or Rockwell FT Optix Water-jacket cooling and vacuum drying ensure rapid cooling and effective drying of chamber loads Single-door HS1 configuration optimized for ergonomic loading and unloading High-quality AISI 316L stainless steel construction with hygienic surface finishes (Ra < 0.8 µm) Automated operation with redundant sensors and independent measurement circuits for reliable sterilization Compliance with GAMP5, 21 CFR Part 11, Annex 11, and optional ASME BPE certification Supports modular accessories including trolleys, batch carts, perforated or wire-mesh shelves, and cleanroom integration Technical Specifications Manufacturer: Belimed Life Science (Germany) Model: PST 9-6-12 HS1 Sterilization Processes: 6050 / 6065 (Steam, Pre-Vacuum, Gravity) Filter Integrity System (FIS): Yes Chamber Dimensions (W × D × H): 1030 × 600 × 1380 mm Usable Chamber Volume: 710–850 L External Dimensions (H × W × D): 1940 × 2150 × 1710 mm Weight: Approximately 1,010 kg Chamber Material: AISI 316L Stainless Steel Surface Finish: Ra < 0.8 µm (≤ 0.6 µm optional) Door Type: Single-door HS1 Loading Type: Ground loader (GR) Cooling System: Water-jacket cooling Vacuum System: Integrated water-ring vacuum pump with optional water recovery Control System: B-Touch interface with PLC Pjdpfx Agoxmi Hqj Horc Electrical Supply: 400 V / 50 Hz (other voltages optional) Compliance: GMP / cGMP, 21 CFR Part 11, Annex 11, ASME BPE options Year of Manufacture: Available on request Serial Number: Available on request Applications Sterilization of laboratory glassware, stainless steel equipment, and porous loads in biopharmaceutical production Small- to medium-scale pilot manufacturing with validated sterilization cycles GMP production environments requiring full regulatory compliance Sterilization of equipment used in vaccine, gene therapy, and biologics research Microbiology laboratories for culture media, instruments, and consumables Benefits Scalable and reliable for pilot and full production batches Validated sterilization with integrated FIS and redundant sensors ensures reproducible cycles High-...

Condition: used, This listing is for the Sartorius LA620S balance The unit is in full working condition and is ready for immediate use The Sartorius LA620S is a high-precision top-loading analytical balance designed for laboratory environments requiring accurate and consistent measurements. Part of the Sartorius LA Reference series, it is renowned for its durability, precision, and advanced weighing technology. Built-in Application Programs: Density determination, statistics, calculation by a factor, animal weighing, weigh averaging for unstable conditions, ± weighing, counting, net-total formulation, and weighing in percent User-Friendly Interface: Plain-text prompts and ergonomic, tactile keys for error-free data input Pedpfxjxl E Nls Ag Hsrc Advanced Calibration: Fully automatic calibration and adjustment function (isoCAL), with memory for up to 50 ISO/GLP-compliant calibration records Enhanced Durability: Metal housing and proprietary monolithic weigh cell technology ensure resilience for daily use

Condition: used, This listing is for the H+P Komet Variomag Poly 15 Magnetic Stirrer The unit is in full working condition and is ready for immediate use The Variomag Poly 15 is a precision-engineered, 15-position direct-controlled magnetic stirrer built for laboratory applications requiring simultaneous mixing of multiple samples. Developed by Variomag-USA (2mag GmbH, Germany), this stirrer is ideal for chemical, microbiological, biotechnical, and medical environments. Core Features Direct-Controlled Operation: Offers simple, immediate speed control for easy use. Inductive Drive: Wear-free and low-maintenance magnetic induction ensures quiet, long-lasting operation. Digital Speed Control: Microprocessor-based for consistent performance, with memory recall for repeated tasks. Soft Start Function: Prevents splash and ensures gentle acceleration to protect magnetic coupling. Simultaneous Stirring: Ideal for processing multiple Erlenmeyer flasks or beakers at once—up to 15 × 250 mL or 6 × 1 L vessels. Typical Applications The POLY 15 is designed for a wide range of laboratory tasks, such as: Growing micro-organisms (e.g., aeration and culturing bacterial cultures) Dissolving nutrient media and solids Preventing settling of suspended particles Podpfx Aexl E Izsg Horc Performing titrations General liquid mixing in R&D, pharma, food science, and education labs

Condition: used, This listing is for the Thermo Scientific Finnpipette F1 Pipette 8 Channel The unit is in full working condition and is ready for immediate use The Thermo Scientific Finnpipette F1 manual pipettes designed for precision, ergonomics, and ease of use in laboratory settings. Available here in a multichannel configurations, the Finnpipette F1 caters to a wide range of liquid handling needs. Key Features Ergonomic Design: Lightweight handle with low plunger and tip attachment forces to reduce the risk of repetitive strain injuries (RSI). Silent Volume Adjustment: Features a silent and lighter volume adjustment mechanism with over 50% lower forces compared to earlier models. Secure Volume Lock: A secure volume setting prevents undesirable volume drift during operation. Simply lift the plunger up to set volume and press down to lock in place with minimum effort. Podpfsxl Ezhox Ag Herc Adjustable Finger Rest: The 120° adjustable finger rest accommodates both right- and left-handed users, allowing the hand to relax during pipetting cycles. Super Blow-out: 150% increase in air boost to ensure efficient delivery of micro-volumes and prevent capillary action in 50 µL models and below. Compatible Tips: Designed to work seamlessly with Thermo Scientific Finntip pipette tips for optimal performance.

Condition: used, his listing is for the BIOCHROM WPA Biowave II UV/Visible Spectrophotometer The unit is in full working condition and is ready for immediate use BIOCHROM WPA Biowave II UV/Visible Spectrophotometer The Biochrom WPA Biowave II is a compact, high-performance UV/Visible spectrophotometer tailored specifically for life science laboratories. It integrates advanced optics, user-friendly design, and flexible analytical capabilities, making it a go-to instrument for researchers performing nucleic acid and protein quantification, among other applications. Key Features and Benefits Wavelength Range: 190–1100 nm (UV and visible spectrum) Optical Design: Monochromator with holographic grating — novel optics with no lid or moving parts Detector: High-resolution 1024-element CCD array Light Source: Long-life Xenon lamp for energy efficiency and extended performance Display: Graphical backlit LCD for easy visualization of wavelength scans, kinetic assays (with slope calculation), and standard curves Sample Volume: As low as 10 µL with quartz cells (ideal for precious or limited samples) Cell Compartment: Designed for 10 µL volume, compatible with quartz cuvettes Data Export Options: USB interface (CSV format), integrated graphical thermal printer, or PC via Print Via Computer (PVC) software (included) Pre-Defined Methods: Nucleic acids (DNA, RNA, oligonucleotides), proteins (BCA, Biuret, Bradford, Lowry), and cell culture (cell density) Measurement Modes: Fixed wavelength (Abs/%T) Absorbance ratio Concentration (standard curve, factor) Prodpfx Asxl Eyqsg Hoc Multi-wavelength Kinetics Life science methods Cell density Scientific Applications Nucleic Acid Quantification & Purity Checking: Visual scans reveal impurities (e.g., 230 nm region for RNA) Protein Assays: BCA, Biuret, Bradford, Lowry Cell Density Measurements Kinetic Studies: Real-time monitoring of reaction rates Low Volume Samples: Ideal for precious or limited biological materials

Condition: used, This listing is for the Quattroflow QS15SU Fluid systems pump The unit is in full working condition and is ready for immediate use The Quattroflow 15SU is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) Solutions of polymers or suspensions (silicon, latex, chromatography media) Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) Prjdpfx Agexl Er Hs Hec colloidal solutions Suspensions of viruses or phage Dairy products Gelatine Supplements and ingredients for cosmetic and food

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Pedpfoxhgfgex Ag Hsrc Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Washing Temperature: Up to 95°C for thermal disinfection. Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Predpfx Ajxhgd Neg Hec Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: 400V (3-phase, 7.0 kW) 230V (single-phase, 2.8 kW)

Condition: used, This listing is for the Hirschmann Pipetus in it's original box (Opened) The unit is in full working condition and is ready for immediate use The Hirschmann Pipetus® is a modern, battery-powered pipette controller suitable for volumetric, graduated, and Pasteur pipettes ranging from 0.1 ml to 200 ml. It is designed for ergonomic use, precise liquid handling, and user-friendly operation. It represents the sum of all possibilities when it comes to pipetting – combining decades of experience, innovative technology, and superior-quality materials. Prodpfxexhgd Ae Ag Hjc Key Features One-button operation for both charging and dispensing of liquid. Fine dispensing valves with ceramic compound valve pins enable exact meniscus configuration. These valves are wear-free and provide maximum chemical resistance. Adjustable speed control: Precisely adjustable pumping and suction speeds for both filling and venting across five finely tuned performance stages. Battery: Rechargeable NiMH battery, up to 40 hours of continuous use. Charging: Inductive (contactless) charging via a microprocessor-controlled station — avoids memory effect. Display: Color display shows pipetting mode, speed settings, and battery status. Compatibility: Works with pipettes from 0.1 ml to 200 ml. Filter: Hydrophobic PTFE membrane filter, 0.2 µm, for contamination protection. Safety: Built-in safety valve prevents liquid ingress into the device. What's Included Pipetus® pipette controller Inductive charging and parking station Wall mount 0.2 µm PTFE membrane filter

Condition: used, This listing is for the Grant JB2 Unstirred water bath without lid The unit is in full working condition and is ready for immediate use The Grant JB2 series of unstirred water baths are reliable, general-purpose laboratory devices ideal for sample warming, media preparation, and quality control. Available in different capacities and configurations, they are especially suited to educational, clinical, and light industrial use. Prodpfx Agexhgdve Hjc

Condition: used, This listing is for the Mettler Toledo Seven Excellence Multi parameter Metre The unit is in full working condition and is ready for immediate use The METTLER TOLEDO SevenExcellence series includes a line of advanced benchtop meters designed for high-precision electrochemical measurements. These meters are ideal for applications in pharmaceuticals, food and beverage quality control, and environmental testing. Key Features Across the Series Measurement Capabilities: Models support pH, conductivity, resistivity, redox/ORP, TDS, salinity, ISFET, ion selective electrodes (ISE), and dissolved oxygen (DO). User Interface & Workflow Optimization: Large touchscreen display for intuitive, efficient navigation. Plain language menu structure eliminates confusion during setup. One-click operation launches one of 17 predefined or 60 customizable methods, boosting throughput. Choose from uFocus™ view, which displays only critical data, or standard view for detailed information including setup and measurements. Data Management: Export results to printers, Excel, or LIMS. Compatible with LabX software for 21 CFR Part 11 compliance and advanced data control. Time and date stamps from a radio-controlled clock ensure compliance with GLP standards. Security & Compliance: User management settings and PIN protection prevent unauthorized method changes. Integrated Sensor Management (ISM®) pH electrodes are automatically recognized and retain their own calibration data—ensuring accuracy even when electrodes are swapped. Prjdpfx Agexhgdpj Hjc Modular and Ergonomic Design: Electrode arm enables easy one-handed operation and precise vertical movement to reduce spills and save time. Modular construction allows for easy upgrades and expansion as your lab's needs change. Connectivity options include USB, Ethernet, and RS-232 ports for integration with PCs and peripheral devices.

Condition: used, This listing is for the Mettler Toledo P25 Printer The unit is in full working condition and is ready for immediate use Pedpsxhgdiofx Ag Herc The Mettler Toledo P25 printer is designed for laboratory environments: the USB-P25 is a compact dot-matrix printers tailored for use with Mettler Toledo instruments, ensuring reliable and compliant printouts.

Condition: used, This listing is for the Formonia Formaflow VVAP1/at Vaporiser System The unit is in full working condition and is ready for immediate use Foramaflow VAP1a/T Formalin Vaporizer Overview: Purpose: Safe and easy formalin fumigation for ducted safety cabinets. Design: Can be mounted externally or placed inside the cabinet before sealing. Capacity: 120ml solution capacity. Automation: Psdpfsxhgdcjx Ag Herc On-delay timer for delayed start. Automatic cut-off switches off heating once the solution has evaporated. Power Supply: 230V. Construction: Lightweight (2.5kg). Stainless steel body with powder-coated, chemical-resistant matte black finish. 55mm discharge tube angled upward by 1°. Safety: Designed for fully automated and safe overnight fumigation

Condition: used, This listing is for Un-used Acon On Call GK114-13B dual blood digital meter The unit is NEW and is ready for immediate use Pjdpfxexhgc Se Ag Horc Dual Testing Capability: Measures both blood glucose and ketone levels. Memory Storage: Stores up to 450 test results, including date and time. Measurement Units: Displays results in either mg/dL or mmol/L, depending on regional standards. Test Reminders: Allows setting up to five test reminders to aid in regular monitoring. Quality Control: Supports quality control testing with On Call control solutions to ensure accuracy. Battery: Operates on two CR2032 coin cell batteries, which are user-replaceable

Condition: used, This listing is for the Hulme Martin 3151 Heat Sealer The unit is in full working condition and is ready for immediate use Prjdexhgc Eopfx Ag Hsc This model Includes Cool and Heat Cool Electronic Controls

Condition: used, This listing is for the HAWO HPL 500 Del Rotary Heat Sealer The unit is in full working condition and is ready for immediate use Prjdpfexhgcxjx Ag Hjc The HAWO HPL 500 D-V machines are considered to be best in class rotary heat sealers designed specifically for the industrial, medical and healthcare markets. The machines produce consistent and optimal seals for sensitive goods

Condition: used, This listing is for the Protosheet Engineering 5L Auto Fumigation pot Stainless Steel Psdpfoxhgb Ijx Ag Hjrc The unit is in full working condition and is ready for immediate use

Condition: used, This listing is for the BioQuell L-4 OPTI The unit is in full working condition and is ready for immediate use The BioQuell L-4 OPTI is a versatile, mobile hydrogen peroxide vapor (HPV) generator that's used for the biodecontamination of various areas and equipment, including isolators, hoods, freeze dryers, and even entire rooms. It's part of Ecolab's Bioquell technology, known for its ability to effectively eliminate bioburden. The "OPTI" designation likely refers to the system's optical sensor capabilities, which may help in monitoring the process or validating its effectiveness Pedpfx Agjxhgbhs Horc

Condition: used, This listing is for the Akta Process Sample Pump The unit is in full working condition and is ready for immediate use ÄKTA Process Sample Pump & System Overview The ÄKTA™ P-960 sample pump is a precision component designed for use in ÄKTA™ chromatography systems, including ÄKTAprocess, ÄKTA pure, and ÄKTA avant. It facilitates accurate and low-pulsation sample application directly to chromatography columns or into sample loops. Key Specifications of the P-960 Sample Pump Maximum Flow Rate: 50 mL/min Maximum Pressure: 20 bar (2 MPa) Prjdexhga Rjpfx Ag Hjc Operating Temperature: Up to 40°C Power Supply: 32 V DC Wetted Materials: ETFE, PEEK, PTFE, PFR, UHMWPE, titanium alloy, borosilicate glass, zirconia ceramic, Elgiloy Connection Ports: Male M6 (inlet), 1/16” finger-tight (outlet and pressure sensor) Features Low Pulsation Operation for consistent, reproducible flows Stepper Motor-Driven Plungers for precise sample delivery Flexible Sample Application: Supports both sample loops and Superloops Air Sensor Integration: Detects air bubbles, ensuring complete sample transfer and avoiding contamination Maintenance and Calibration Daily Calibration recommended using degassed liquids Rebuild Kit Available (Part # KDT-1811-9497-N) including check valves, pistons, and O-rings Back-pressure Limit: < 0.3 MPa during calibration

Condition: used, This listing is for the Handilaz Mini Particle Counter complete with case and manual (Others available without case - see listings) The unit is in full working condition and is ready for immediate use Pjdpfxjxhga Dj Ag Hsrc Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. Pedoxhgawjpfx Ag Hjrc How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research