CNC Tratnik d.o.o.

Condition: excellent (used), As-new tool holders for DECO 20 - DECO 26 3 pieces - TORNOS fixed tool holders for X1Y1; X2Y2; X4Y4 ----- - Turning tool holder for 16x16 mm tools: - Price per holder: €180.00 each fits DECO2000 ø20 & 25mm, DECO 20 and DECO 26 3 with front plate 1 without front plate Giedpfoy Apn Ajx Afzor ----- Shipping within Germany €12.00 Shipping within EU €25.00 Additionally, we have 6 spindle reduction sleeves: were used in DECO 26mm inside-ø 8.0mm; ø 12.0mm; ø 21.0mm; 3x ø 26mm outside-ø 30mm, thread M32x1.5, approx. 360mm length flange-ø outside 45mm x 9mm, 4x M4 threaded holes 2x 8 mm keyway Special price for all 6 reductions including shipping: €380.00 We are happy to send photos upon request; for this, we require your email address.

Condition: excellent (used), Year of construction: 2022, operating hours: 16,700 h, functionality: fully functional, Traub TNL 20 – 9B Year of manufacture: 2022 Control system: TX8i-s (with Polyform / Helical / 19" multitouch with gesture technology) Convertible operation: can be used as short or long turning lathe Main spindle D20 (with 10,000 rpm), with C-axis Counter spindle D20 with X/Z/C axes Upper tool carrier X/Y/Z/H/B axes with 8 tool stations Lower tool carrier X/Y/Z/H axes with 8 tool stations Back-working attachment with 4 tool stations Coolant mist extraction and filtration system Automatic CO2 fire suppression system Precision package Tool breakage monitoring (upper tool carrier) Tool breakage monitoring (lower tool carrier) Hinged belt chip conveyor Coolant system with 20 to 80 bar pump Bar feeder FMB Turbo 2-20 Bar feeder shifting device Portal workpiece discharge unit Workpiece transport conveyor A comprehensive set of tools is included. Linear movement axes: 1) X1 Upper turret 2) V1 Upper turret 3) X2 Lower turret 4) Z2 Lower turret 5) Z1 Pickup spindle 6) X4 Rear machining unit 7) Z4 Rear machining unit Rotational axes: 8) C1 Pickup spindle 9) C2 Main spindle Swivel axes: Gsdpfx Asy Am Nkefzeir 10) B Upper turret carrier unit 11) H1 Upper turret 12) H2 Lower turret Workpiece discharge unit: 13) Z5 Lateral feed 14) X5 Rotary movement At Traub, the machine is designated TNL20-9, with "B" indicating the upper tool carrier is equipped with a swivel axis, since movement and rotational axes are counted first. A graphic illustration from the manual showing all axes is attached. As is usual with the supplier, the machine is equipped with every available optional feature you might want. If you are looking for an "all-in-one solution," this is it! Please only inquire if you are seriously interested in the machine. Thank you.

Condition: ready for operation (used), Year of construction: 2017, overall weight: 4,100 kg, total width: 1,345 mm, total height: 1,780 mm, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: 32i-B, product length (max.): 2,690 mm, number of axes: 7, This 7-axis STAR MICRONICS SR-32JII-typeA was manufactured in 2017. It features a bar capacity of Ø32 mm and includes a main spindle and sub-spindle with C axis. The machine is equipped with a synchronized guide bushing and a gang tool plate with 6 positions. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR-32JII-typeA swiss type turning machine we have for sale. Contact us for further details. • Bar capacity: Ø32 mm • Spindles: Main + sub-spindle with C axis • Guide bushing: Synchronized type (Neukomm) • Cross slides: X-Y / X-Z configurationStandard equipment Gisdpfxoy Am I Hj Afzjr • Pneumatic unit • Safety door lock • Spindle & sub-spindle cooling unit • Coolant tank: 255 L with level & flow control • Automatic lubrication system • Working area lighting • Pneumatic cleaning through sub-spindle • Tool breakage control • Parts conveyor • Electronic handwheel • RS232 / USB interface • CE markingTooling configuration • Gang tool plate with 6 positions • 5 radial tool positions (incl. 3 motorized ER20) • 5 front tool positions (incl. ER16 + ER20) • Motorized backworking plate (6 positions) Additional equipment • High-pressure pre-installation • High-pressure coolant system: 69 bar / 20 L/min • Rear axial drilling/milling unit (ER16) • Chip conveyor • Coolant filtration systemBar feeder • IEMCA BOSS 338/37 HD • Max bar length: 3700 mm • Capacity: Ø38 mm Technical Specification Counter Spindle No

Condition: used, Year of construction: 1997, machine/vehicle number: IntNr230982, used CNC long lathe Citizen L520, year of manufacture 1997 Control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar diameter max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt, Loading magazine FMB Turbo 3-26 Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight: 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight: 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information and prior sale! CNC sliding headstock lathe Citizen L520, year 1997 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazines Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight: 1750 [kg] Giodpfxjy Agrro Afzer Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight: 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as before sale!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Key Data Machine: TRAUB TNL 18 Year of manufacture: 2015 Condition: Premium grade / Excellent Previous owner: Smith & Nephew; manufacturer of orthopedic implants Machine type: TNL 18, version TNL18-9 Acquisition price (2015): 206,800 EUR Application: Long and short turning operations Manufacturer: TRAUB Drehmaschinen GmbH & Co. KG Control / CNC Control system: TX8i-s with 64-bit RISC CNC/PLC processor USB interface PC connection via fiber-optic cable Color TFT flat-screen Electronic handwheel Software package: Helical / Polyform Thread cutting without compensation chuck Parting-off tool break monitoring Axis / GSP block position shutdown Giodpfoyz Dywox Afzer Spindles / Axes / Clamping technology Main spindle with belt drive Hollow clamping cylinder C-axis Change parts for collet F25 Mount for driven and programmable guide bushing Change parts for short turning mode Counter spindle with belt drive Hollow clamping cylinder X-Z-C axis Part ejector unit for flushing workpieces from the counter spindle Tool system Lower turret with X-Y-Z-H axis, main drive, 8 tool stations Upper turret with X-Y-Z-H axis, main drive, 8 tool stations Measuring systems / Additional axes Glass scale X-axis top and bottom Glass scale X4-axis Activation for driven and programmable guide bushing Workpiece handling / Peripheral equipment Workpiece discharge unit through the counter spindle Workpiece discharge unit at the front onto parts conveyor belt Hinged belt chip conveyor Manual rinsing unit for working area Connection for central extraction D 150 mm Coolant / Filtration / High pressure Operation with cutting oil Coolant supply 3 / 8 bar Tank: 500 l Compact belt filter on 500-l coolant tank Flow rate: approx. 100 l/min with emulsion or approx. 70 l/min with cutting oil Filtration fineness: approx. 30–40 micron Internal coolant supply up to 30 bar High-pressure coolant pump 120 bar incl. fine filter Immersion cooler for coolant cooling Coolant pump 20 bar Safety / Fire Protection Automatic CO2 fire extinguishing system Operational note: cutting oil EU conformity / CE present Electrics / Documentation Electrical system: 400 V / 50 Hz User documentation available Additional German documents available Magazine / Attachments Attachments for bar feeder magazine Suitable for LNS, FMB, IEMCA Magazine must be equipped for interchangeable operation with shift unit

Condition: used, Year of construction: 2004, operating hours: 153,199 h, machine/vehicle number: IntNr231165, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Giodpfx Ajyzzwtefzer Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231164, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale! Gjdpfxoyzzvce Afzjir

Condition: used, Year of construction: 2003, operating hours: 86,000 h, machine/vehicle number: IntNr231169, STAR CNC Swiss-type lathe SB 16, year of manufacture 2003 CNC control FANUC 18i-TB Technical data: - Number of axes: 6 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Z-axis travel: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001 SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm - Minimum C-axis resolution: 0.001 Gedpfx Afjyzzurozjir Bar feeder: FMB Minimag /3200/A Bar diameter: 2 – 16 mm Bar length: 3,200 mm Kraft & Bauer compact fire extinguishing system Mayfran chip conveyor High-pressure coolant system: 70 bar / 8 valves / filter bag Operating manual included The machine can be inspected under power by appointment. Technical data and descriptions are subject to change and error; prior sale reserved!

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Make: STAR Model: SR-32 Year of manufacture: 1999 with: FANUC 16-T control Backworking capability Synchronous spindle Driven tools C-axis Bar loader magazine FMB TURBO 5-42 Giedpfx Afjyzyr Njzsr

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Gijdpfxeyzxp Tj Afzjr Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: used, Year of construction: 2007, Citizen M32-V Mfd. 2007 Hours: 99,608 High Pressure Mist Collector Gisdjyzkb Ujpfx Afzer Chip Conveyor Long work piece attachment No tooling 338 Edge Patriot Loader (Accepts 8ft Bars) Machine came out of an Aerospace Company in Michigan.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2560460122, Tornos Swiss GT13/6 - Sliding Headstock Automatic Lathe CNC Control: FANUC 31i-B, 6 axes, 13 mm capacity Basic Machine Equipment: - 6 linear axes - Independent main and counter spindle - Synchronously rotating guide bush - Adaptation for operation without guide bush - C axis for main and counter spindle - Adjustable pneumatic ejector incl. counter spindle coolant flushing - 3-color signal lamp (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Oil mist extraction interface - Interface for fire protection system - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm - Max. bar diameter with preparation: 13 mm - C1 axis function Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor), guide bush type: B (853) - Max. workpiece length in one clamping: 180 mm - Adaptation kit for operation without guide bush (max. travel: 30 mm) Tool System for Main Operations: - Tool holder for 5 turning tools 12x12 mm on the front of the carrier - Tool holder for 4 turning tools 12x12 mm on the rear of the carrier - S11 tool drive (10,000 rpm) for rotating tools mounted on the front of the carrier X1/Y1 - 1 drive module for cross machining with 3 spindles for ESX 16 collets (2 x 10,000 rpm and 1 x 6,250 rpm) - S21 tool drive (6,000 rpm) for up to 2 driven units mounted on the rear of the carrier X1/Y1 (driven units not included) - Tool carrier with 4 bores Ø 22 mm for stationary finishing tools Counter Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076), max. Ø capacity: 13 mm Gsdpfxoyzigcs Afzoir - C4 axis function Tool System for Secondary Operations: - Base carrier for 8 back-working tools; on the 4 upper positions, rotating and/or stationary tools can be mounted (rotating tools not included) - 4 lower positions with 4 fixed holders for ESX 16 collets - 2 stationary holders with Ø 22 mm bores (for upper positions) - S51 tool drive (6,000 rpm) for driving back-working tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing options to suit your requirements. Whether down payment, installment plan, or individual financing solutions – together we will find the right option for you. Upon request, we will also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and punctual process so you do not have to worry about a thing.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Bar capacity: 20 mm MACHINE DETAILS Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Supply voltage: 400 V Dimensions & Weight Footprint: 2,000 x 1,280 mm Godpfeyzhlqsx Afzjir Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Fire protection system High-pressure unit 70 bar Muller Oil cooling unit Circuit diagram Maintenance documentation Operating manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control, 16 mm spindle bore, sub-spindle, Giodpfjyyxqnsx Afzsr 3 driven radial tools, high-pressure pump, fire extinguishing system, FMB bar feeder, extensive accessories.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Fanuc control, spindle bore 26 mm, sub spindle, 4 driven tools (axial) for sub spindle, Gjdpfx Afsyyxkzozoir 3 driven tools (radial) for main spindle and sub spindle, FMB bar feeder, fire extinguishing system, high-pressure pump, lots of accessories.

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231167, STAR CNC long-turning lathe SA 16RC, year 2004 CNC control: FANUC 18i-TB Technical data: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE Gjdeyymirspfx Afzeir - Maximum bar diameter: 12 mm - Spindle speed: 8000 rpm - Number of tool stations: 4 Bar feeder: FMB Turbo 2-16 / 3200 / A Bar diameter: 0.8 – 18 mm Bar length: 3200 mm High-pressure system / 2 valves Operator’s manual included The machine can be inspected under power by prior appointment. Subject to prior sale and technical changes or inaccuracies in the above data!

Condition: used, operating hours: 58,685 h, machine/vehicle number: IntNr231539, CNC Swiss Type Automatic Lathe STAR SR-20RII with FMB Turbo 3-26 Year of manufacture: 12/2006 Control: Fanuc 18i-TB Technical Data Gjdpsyycpuefx Afzoir Max. turning diameter: Ø 20 mm (optionally up to Ø 22 mm) Turning length: 205 mm Main spindle: • Speed: up to approx. 10,000–12,000 rpm • Power: approx. 3.7–5.5 kW • C-axis for contour machining Sub spindle: • Speed: up to approx. 6,000–8,000 rpm • C-axis Axes (travel distances): • X1 / Z1 / Y1 (main machining): X1 approx. 265 mm / Z1 approx. 205 mm / Y1 ± 20 mm • X2 / Z2 (sub spindle): similar to main axis, exact values depend on the machine • Rapid traverse: approx. 24–30 m/min Machine dimensions: 2,400 × 1,205 × 1,700 mm Machine weight: approx. 2,200 kg Bar feeder: FMB TURBO 3-26/3200 Chip conveyor Inspection: The machine can be inspected on site by prior appointment. Note: Technical data subject to change and errors. Intermediate sale reserved!

Condition: good (used), Year of construction: 2015, Main and counter spindle 3 turrets Gjdpeyx Tk Tefx Afzeir Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Bar feeder FMB Turbo 2-20

Condition: used, Year of construction: 2014, 2014 Citizen M32-Vlll 15 Axis CNC Sliding Headstock Automatic Lathe With Iemca Boss 338-HD/R 37LL Barfeeder - With Cool Blaster CB510 high Pressure Coolant System, Tooling In Machine, Parts Catcher, Absolent A.mist10S Mist Extraction Unit, Nobel Fire Suppression Unit, Signal Tower & Manuals. Iemca Boss 338-HD 37LL Bar Feeder Length 4,600mm, S/No. 021522NA06 (2015). Max Machining Ø32mm. Max Machining Length 320mm(1/Chucking) . Max Front Drilling Ø12mm. Max Front Tapping M10. Through Spindle Ø36mm. Max Main Spindle Speed ​​8,000rpm (Motor 3.7/7.5kW). Max. Drilling Diameter For The Gang Rotary Tool Ø8mm. Max. Tapping Diameter For The Gang Rotary Tool M6. Spindle Speed Of The Gang Rotary Tool 6,000rpm (1kW Motor). Max. Drilling Diameter For The Turret Rotary Tool Ø10mm. Max. Tapping Diameter For The Turret Rotary Tool M8. Spindle Speed Of The Turret Rotary Tool 6,000rpm (0.75/1.5kW Motor). Max. Drilling Diameter For The Back Spindle Ø10mm. Max. Tapping Diameter For The Back Spindle M10. Back Spindle Speed 8,000rpm (2.2/3.7kW Motor). Max. Drilling Diameter For The Back Tool Post Rotary Tool Ø8mm. Max. Tapping Diameter For The Back Tool Post Rotary Tool M6. Spindle Speed Of The Back Tool Post Rotary Tool (1kW Motor). Max. Chuck Diameter Of The Back Spindle Ø32mm. Max. Protrusion Length Of The Back Spindle Workpiece 65mm. Max. Protrusion Length 145mm. Number Of Tools To Be Mounted 31+ α. Gang Tool Post 5. Gang Rotary Tool 4. Gang B Axis Rotary Tool 3. Number Of Turret Station 10. Back Tool Post 9. Tool Dimension Tool (Gang Tool Post) 16 x 16mm. Sleeve φ25.4mm. Chuck And Bushing Main Spindle Collet Chuck FC081-M, Back Spindle Collet Chuck FC081-M-K, Guide Bushing FG531-M. Rapid Feed Rate All Axes (Except ‘X2 & Y2’) 32m/min, ‘X2’ Axis 18m/min, ‘Y2’ Axis 8m/min, ‘Y3’ Axis 32m/min. Centre Height 1,150mm. Input Power Capacity 20kVA. Weight 3,650kg. S/No.P30498 (2014). Gjdpfx Aoyx H A Njfzeir

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: MLK 26F1.5 | Year of construction: 2018 The machine can be inspected by appointment under power. Condition: Well maintained, fully functional / ready for use. Operating hours: approx. 28.797 hours. TECHNICAL SPECIFICATIONS: - Axes: 11 - Turning diameter over bed: 32 mm - Spindle bore: 32 mm - Channel 1/Z1 > Spindle stroke: 180 mm (short-run configuration), 340 mm (long-run configuration) - Main spindle speed: 6.000 rpm - Spindle motor power: 5.5 / 3.7 kW - Channel 2/Z2 > Turning length (counter spindle): 340 mm - Counter spindle speed range: 8.000 rpm - Clamping chucks: 1536E - Drive motor power: 5.5 / 3.5 kW - Total power requirement: 28,7 kW, 60 A - Machine weight approx.: 4,4 tons - Space requirements: approx.: 8,0 x 2,7 x 2,1 m SPECIFICATIONS: - CNC control: FANUC 31i-B - 1 counter-spindle - NC C-axis on main and counter-spindles - Tool holders for 5 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, make: FMB Turbo Ø 3–36, year of manufacture: 2018 Guide channel DM12 - Chip conveyor - Electronic handwheel - High-pressure system, make: KNOLL, 50 bar with paper belt filter system - Fire protection system, make: KRAFT & BAUER - Extraction system Gsdsyxxdlopfx Afzjir - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, CNC-Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: ML 20 C5Y2 Basic | Year of construction: 2020 The machine can be inspected by appointment under power. Condition: Fully functional, well-maintained / ready for use. Operating hours: approx. 19.498 h TECHNICAL SPECIFICATIONS: - Axes: 8 - Turning diameter over bed: 32 mm - Spindle bore: 20 mm - Channel 1/Z1 > Spindle stroke: 220 mm - Main spindle speeds: 8.000 rpm - Spindle motor: 5.5 / 3.7 kW - Tailstock bore: 20 mm - Tailstock speed range: 8.000 rpm - Channel 2/Z2 > Turning length (counter spindle): 240 mm - Clamping chucks 161E - Drive motor power: 5,5 / 3,5 kW - Total power requirement: 19,4 kW / 35 A - Machine weight: approx. 4,2 tons - Space requirements: approx. 8,0 x 2,7 x 2,2 m Giodpfxsyxw Ipe Afzjr EQUIPMENT: - CNC-Control: FANUC 31i-B - 1 x counter-spindle - NC C-axis on main and counter-spindles - DM12 guideway - Tool holders for 5 fixed turning tool holders, cross-section 12 x 12 mm - Bar loader, FMB Turbo model, Ø 3–36, year of manufacture: 2020 - Chip conveyor - Electronic handwheel - KNOLL high-pressure system (50 bar) with paper belt filter system - Fire protection system, Brand: Kraft & Bauer - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2001, operating hours: 43,436 h, functionality: fully functional, machine/vehicle number: 0298 (029), turning length: 205 mm, spindle speed (max.): 10,000 rpm, type of input current: AC, total width: 2,785 mm, total length: 2,810 mm, total height: 4,578 mm, bar diameter (max.): 20 mm, input voltage: 400 V, empty load weight: 4,121 kg, DGUV certified until: 01/2026, load capacity per storage section: 250 kg, Equipment: documentation/manual, We are selling our 9-axis CNC Swiss-type automatic lathe! The machines are in good condition, well-maintained, and fully operational. Control model: Fanuc 16i-T Number of axes: 9 Axes: X / C1 / Y / E / B / A / X / C2 Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Max. counter spindle speed: 10,000 rpm 3 cross drilling units, 5,700 rpm Giedpsyxv Uusfx Afzer MACHINE DETAILS: - Control: Fanuc 16i-T - Coolant: Oil - Tank capacity: 170 L - Operating hours: 43,436 EQUIPMENT: - 5-position tool holder - 3 cross drilling units - Turret with 8 stations - Various additional tool holders - Parts conveyor belt - FMB Turbo 3-26 /3200/B bar feeder - Chip conveyor Can be collected at any time in Königsbach-Stein, Baden-Württemberg.

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. sub spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Giodpfx Aoyxpqvjfzjr Y-axis travel 1: 350 mm Tool stations: 6 / 4 positions Fixed stations: 6 Driven stations: 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool stations: 2 / 3 positions Fixed stations: 2 Driven stations: 3 Y2 SLIDE Tool stations: 3 / 2 / 2 positions External machining: 3 Internal machining: 2 Driven stations: 2 Weight: 4,500 kg Bar feeder: IEMCA BOSS

Condition: used, CITIZEN CINCOM K 16 E V II P is a CNC automatic lathe designed for precision, high accuracy and reliability. Capacities: max turning Ø 16 mm, turning length 200 mm, spindle bore 20 mm, max threading 8 M, back‑machining 80 mm. Specs: 7 axes, spindle 200–10000 rpm, 2× HF 60000 rpm, spindle motor 3.7 kW, 4 driven tools 6000 rpm, 3×400 V 50 Hz, weight ≈2250 kg, L2020×W1070×H1680 mm. Accessories: LNS bar feeder, Donaldson oil‑mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Gsdpjyxn D Uefx Afzjir

Condition: used, STAR SB-20R type N is a CNC automatic lathe (CNC Swiss type) engineered for high-precision work with superior accuracy and reliability. Capacities: max turning Ø 20 mm, max drilling Ø 10 mm, max threading Ø 8 M; total 5 axes, C-axis resolution 0.001°. Specs: spindle stepless 500–10000 t/min, rapid traverse 35 m/min, spindle motor 2.2/3.7 kW, total power 3.7 kVA, 50 Hz 3x 400 V, weight ≈1800 kg, dimensions L2070 × W1770 × H1760 mm. Accessories: C axis, workpiece conveyor, chip conveyor, coolant system, RS232 and USB interfaces. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace and medical sectors. Godpfsyxnztox Afzsir