Ecurex

Condition: used, 50 m³ stainless steel tank Bledpfsz Hv Ifjx Aa Ten With a flat bottom 7 units available: 5 units with a diameter of 3.55 m and a height of 5.50 m or 5.40 m (quantities for each variant to be confirmed upon delivery). 1 unit with a diameter of 3.00 m and a height of 8.40 m. 1 unit with a diameter of 3.00 m and a height of 7.10 m. NOTE! The tanks require a concrete pad or foundation (available from us at additional cost).

Condition: good (used), tank capacity: 14,500 l, total width: 2,150 mm, total height: 6,200 mm, Equipment: cooling unit, 14500l stainless steel tank with cooling Height: 6200 mm Diameter: 2150 mm Operating pressure: 0.0 bar internal, 1.0 bar cooling jacket Material: Stainless steel 1.4301 (AISI 304) Design: Cylindrical, upright, on a central plinth; DN 40 outlet; top manway; CIP with RLV line; 3 cooling zones Bjdpfxezzxhao Aa Tjln Previous application: Beer 3 units available Each tank has been leak-tested A 12-month warranty is provided for each tank.

Condition: used, Vertical tank with a capacity of 70,000 liters, made of fiberglass-reinforced polyester. 4 units available; the price quoted is per unit. Height: 6000 mm. The tanks are double-walled, with two layers of plastic and a 5 cm thick polyurethane foam layer in between. The tanks are located near Poznań. Loading is free of charge. Bsdpfx Aezy Adcoa Tsln Please check out my other listings.

Condition: used, wall material: stainless steel, Insulated, vertical mixing tank made of stainless steel, used. The tank has a conical bottom and a mixer suitable for thick substances. Total height: 2650 mm Bjdpfezy Aa Djx Aa Toln Diameter: 1600 mm Please check my other listings.

Condition: used, Used vertical tank with a capacity of 2000 liters, insulated, equipped with a mixer and CIP cleaning system. The tank has a conical bottom and a robust mixer suitable for viscous materials. Overall height: 2500 mm Diameter: 1300 mm Bodpfx Aozy Aadea Teln Please check out my other listings.

Condition: excellent (used), Used vertical tank with a capacity of 30,000 liters, made of fiberglass reinforced polyester. Diameter: 2800 mm Bledpfszyz Utjx Aa Ton Height: 5500 mm Loading included. Please check my other listings.

Condition: excellent (used), Vertical tank with a capacity of 30,000 liters. Diameter: 2800 mm Height: 5600 mm The tank comes with a complete set of lids for closing. The tank is made of fiberglass-reinforced polyester. The tank is resistant to chemicals and acids. Bodpfx Aaezyz Ugs Teln Please see my other listings.

Condition: excellent (used), Year of construction: 2006, Equipment: CE marking, The tank was used for storing compressed air. Overall height: 4000 mm Diameter: 1250 mm Pressure: 6 bar Year of manufacture: 2006 Tank type: pressure vessel Blsdpfx Ajzyz T Aoa Ton Two identical tanks are available; the price stated is per unit. Please check my other listings.

Condition: excellent (used), Isothermal Aseptic Tank BIO-INOX 18,000 L – Stainless Steel BIO-INOX 18,000-liter aseptic tank with a double bottom and thermal insulation, designed for the storage and intermediate preservation of liquid and semi-liquid food products under controlled hygienic conditions. Its large-capacity vertical configuration and stainless-steel construction allow it to be integrated into aseptic processing industrial facilities, acting as a storage tank or buffer between thermal treatment and filling stages. The isothermal design helps limit temperature variations of the product during its stay in the tank, while its aseptic configuration is designed for processes where it is necessary to preserve the hygienic conditions of the previously treated product. MAIN FEATURES -Manufacturer: BIO-INOX -Type: Isothermal aseptic tank -Capacity: 18,000 liters -Vertical configuration -Double bottom -Stainless steel construction -Isothermal / thermally insulated design -Prepared for aseptic storage -Large storage capacity -Sanitary product connections -Stainless steel support legs -Designed for continuous industrial processes -Suitable as a buffer tank / intermediate storage -Integrable into aseptic processing and filling lines -Hygienic construction for the food industry APPLICATION The 18,000 L BIO-INOX is designed to receive and temporarily store processed product, maintaining it under controlled conditions before its transfer to the next stage of production. It can be used as an aseptic buffer tank between a sterilizer and a filler, providing accumulation capacity and helping to partially decouple the different stages of a process line. Bsdpfozxccvjx Aa Toln It can be integrated with: Aseptic sterilizers UHT systems Heat exchangers Sanitary pumps Homogenizers CIP systems Aseptic piping and valve systems Aseptic fillers Complete processing lines APPLICATIONS Particularly suitable for juice and beverage industries, fruit, tomato, puree, pulp, concentrate, sauce, and other liquid or pumpable food product processors that require intermediate storage within an aseptic process. Its 18,000-liter capacity, stainless steel construction, and isothermal configuration provide a large-capacity solution for aseptic processing and storage industrial facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), FMC FoodTech 2,000 L Vertical Tank – Stainless Steel and Flat Bottom FMC FoodTech 2,000-liter vertical tank made of stainless steel, designed for the storage, accumulation, and handling of liquids in industrial food and beverage processing. Manufactured in stainless steel, it features a vertical cylindrical configuration with a flat bottom and support structure, providing a robust and hygienic solution for storing water, liquid ingredients, and other products used in food processing. Manufactured by FMC FoodTech, this tank is particularly suitable for integration into food, beverage, juice, fruit, and citrus processing facilities. MAIN FEATURES -Manufacturer: FMC FoodTech -Capacity: 2,000 liters -Type: Vertical storage/process tank -Configuration: Vertical cylindrical -Bottom: Flat -Stainless steel construction -Mounted on stainless steel legs -Bottom outlet connection -Hygienic construction -Designed for industrial food applications -Integrable into existing process facilities -Robust construction for industrial use APPLICATION The FMC FoodTech 2,000 L tank provides an industrial solution for the storage, accumulation, and intermediate holding of liquids within food and beverage production processes. It can be installed as a stand-alone tank or integrated into a complete line as a buffer or intermediate tank between different stages of the process. Depending on the characteristics of the product, it can be used for: -Water storage -Juices and beverages -Liquid food products -Liquid ingredients -Process water -Intermediate product accumulation -Fruit and citrus processing -Buffer tank between production stages APPLICATIONS Bjdpfx Aaozwv Ngs Tsln A particularly suitable solution for food industries, beverage manufacturers, juice producers, and fruit and vegetable processors who need a stainless steel tank for storage or intermediate accumulation. Its 2,000-liter capacity allows it to be integrated as both a stand-alone unit and within complete industrial lines. The stainless steel construction facilitates its use in applications where hygiene, ease of cleaning, and corrosion resistance are required. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, total width: 1,900 mm, total height: 6,500 mm, diameter 1.90m height 6.5m Bedpfx Aezwm U Tsa Tsln on legs and agitator

Condition: excellent (used), total width: 3,245 mm, total height: 13,053 mm, 90m³ stainless steel tank with heating and a robust funnel DIMENSIONS: - Diameter: 3.245 mm - Height: 13.053 mm Cylinder and bottom plate thickness: 3.1 mm Top plate thickness: 2.6 mm Steel grade: AISI304 (stainless steel) Year of manufacture: 2006 Weight: 4680 kg A DN 600 manhole with a hinged cover is located on the top. Stainless steel pressure-vacuum valve Downstream: DN400 manhole with hinged cover Bledpfxjzwm N Do Aa Ton Stainless steel pressure-vacuum valve 1) Upper tank heating: 6 coils, exchange surface area 6.95 m², pressure drop 2 bar Above: 2 coils, exchange surface area 2.33 m², pressure drop 2 bar Device for transferring grounds, test valve 2) Lower tank heating: 4 coils, exchange surface area 4.64 m², pressure drop 2 bar Above: 2 coils, exchange surface area 2.33 m², pressure drop 2 bar. Level gauge Rectangular manhole 555x432 DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing.

Condition: used, tank capacity: 50,000 l, total width: 3,600 mm, total height: 8,700 mm, Insulated 50m³ stainless steel tank with heating jacket and agitator Diameter: 3.60m Height: 7.20m + 1.50m agitator = total height 8.70m The tank is insulated and lined with steel sheet. The heating strip is located in the lower half of the tank. The tank has a flat bottom. Gear motor power: 10 kW/15 kW. Mixing speed: approx. 20 rpm. Blodpfx Aozwm Nksa Ten

Condition: used, Year of construction: 2009, Used storage tank, 50,000 liters - Year of manufacture: 2009 Bledpozwh A Ejfx Aa Ton - Double-walled, above-ground tank, complying with DIN 6616/D - Cleaned - Inspection certificate

Condition: good (used), Year of construction: 2020, functionality: fully functional, tank capacity: 2,500 l, total length: 1,800 mm, total width: 1,200 mm, total height: 1,740 mm, Storage tank for AdBlue / diesel, 2,500 liters. - without dispensing equipment - DiBt approval - double-walled - 2 cable glands Bsdpfxezwg Iae Aa Tsln - level indicator - overfill protection - inspection cover DN150 - leak protection - venting and breathing

Condition: good (used), total height: 7,500 mm, outer diameter: 2,750 mm, 32000l Insulated stainless steel tank with a side-mount propeller agitator 8 kW power Diameter: 2.75 m Height: 7.5 m Slightly conical bottom Bsdjzvwlgepfx Aa Tjln It is placed on legs

Condition: excellent (used), functionality: fully functional, tank capacity: 120,500 l, total height: 20,000 mm, inner diameter: 3,000 mm, outer diameter: 3,300 mm, wall material: stainless steel, wall structure: single-walled, number of chambers: 1, operating temperature: 20 °C, operating pressure: 3 bar, Stainless steel pressure vessel, vertical, insulated Technical data / Dimensions Available quantity: 8 Volume: approx. 120,000 liters Vessel type: Pressure vessel Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,300 mm Overall height: approx. 20,000 mm Specific gravity of the medium: 10.00 t/m³ Operating pressure: Overpressure Operating overpressure: 3.00 bar Wall thickness, bottom: approx. 6.0 mm Wall thickness, top: approx. 4.5 mm Wall thickness, shell / cylinder: approx. 3.5-5 mm Operating temperature: 20°C Material / Properties Material, inner shell: Stainless steel Material grade: V2A-1.4301 (AISI 304) External surface: Ground, welded seams passivated Welded seams, internally ground: Yes Insulation Insulation present Insulation thickness: approx. 120 mm Insulation material: Mineral wool Material, insulation jacket: Aluminum Insulation jacket: Trapezoidal sheet Equipment Base type: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Dished end Bottom type, bottom: Dished end Top: 1 x Insulated dome DN 900 1 x Access opening with dome cover DN600 1 x Valve dome cover with the following connections: 1 x Cleaning-ventilation-valve combination (RLV) DN 50 1 x Vacuum valve, spring-loaded with 2 heating elements and thermostat 1 x Safety valve 1 x Burst disc 1 x Thread DN 50 for probe Shell: 1 x Condensate pipe DN 25 1 x Cable protection pipe DN 32 1 x CIP pipe DN 50 1 x Base ring made of Cr-Ni steel (1.4301) with access opening 600 x 600 1 x Spray pipe with protruding ball head Bottom: 1 x Outlet cup DN 300 1 x Outlet with cover cap, chain, and eyelet DN 80 1 x Connection fitting for sampling tap DN10 Documentation Drawing Inspection log Inspection certificate Bljdpjzvh Dtefx Aa Ten

Condition: used, Vertical, insulated stainless steel tank. Most recently used as a CIP tank. Bodpoztzdhefx Aa Teln Additional title: Vertical stainless steel tank with insulation; built around 2000 Capacity: 7000 l Width: 2,2 m Height: 3,1 m Weight: 800 kg Material: Stainless steel Position: Vertical Base construction: 3 x feet Features: Side manway; insulation

Condition: used, Year of construction: 1970, Additional title: Vertical tank Capacity: 5244 l Max. allowable operating pressure: 5 bar Operating temperature: 20 °C Width: approx. 1600 mm Height: approx. 3200 mm Material: Stainless steel 1.4541 Position: vertical Base construction: 3 x feet Features: Manway; safety valve; CIP piping Bodeztzdbopfx Aa Toln

Condition: used, Year of construction: 2002, Cylindroconical stainless steel tank with glycol cooling for frame and cone, ventilation nozzle at the outlet and various fittings. Wall thicknesses: - Cone 3 mm - Frame 2 mm - Clamp bottom 3 mm Cone angle: 120° Roughness of cone interior < 0.35 µm Additional title: Vertical, cylindrical-conical, coolable stainless steel tank Volume: 4681 liter Bljdpfxsztza As Aa Tjn Working pressure tank: 0,99 bar Working presure double jacket: 0,9 bar Width: 2.3 m Height: 2.5 m Material: V2A stainless steel 1.4301 (AISI 304) Base construction: cylindroconical, opper bottom dished shell, on 3 cabinet legs one is 50mm shorter for a load cell Features: 3 cooling zones with volumes of 7 and 14 and 34 liters, coolant = glycol solution, connection size inlet (one each) DN 20, connection size outlet (one each) DN 25, sight glas DN100 mit halogen lamp,CIP head, air duct with sterile filter, standpipe, outlet pipe DN 65 with disc valve, manhole with lid, sampling tap, temperature sensor, load cell, Safety fitting consisting of over pressure pipe with valve, manometer and flap valve DN32

Condition: used, Year of construction: 2018, Vertical pressure tank with jacket cooling and various fittings. Additional title: Vertical, coolable stainless steel tank Blsdpfxozty Sqo Aa Tjn Max. content: 6681 l Max. pressure: 3 bar Width: approx. 1.9 m Height: approx. 3.3 m Operation / Control: manual Material: stainless steel Position: free standing Base construction: vertical cylindrical tank with dished bottoms, pipe feet with domes Features: pivoting manhole in the lid, ladder holder, 2 shell cooling zones with temperature control, side inlet, central bottom outlet with shut-off valve

Condition: used, Year of construction: 1978, Pressure tank with conical head and central outlet, additional tangentially mounted inlet/outle and manhole, upper dished head. Additional title: cylindroconical tank Volume: 10000 l Working pressure: 3 bar Width: 2,3 m Height: 4,3 m Weight: 1000 kg Material: stainless steel Position: vertical Bljdpfx Ajzty Skoa Tsn Base construction: on feet Features: central outlet, additional tangential inlet/outlet, manhole

Condition: used, Year of construction: 1979, This pressure vessel from Werk Steinecke is a robust and reliable solution for use as a buffer tank in breweries and beverage processing plants. With a capacity of 178 hl and an operating pressure of 4 bar, it is ideal for intermediate storage and process buffering. The tank is designed for horizontal installation and features a solid industrial construction. It is equipped with a DN80 connection and can be fitted with the desired additional fittings from the available stock after consultation. A reliable and cost-effective solution for expanding or upgrading your production system. Our team at VBW Asset Trade will be happy to answer your questions. Additional title: puffer tank Capacity: 17800 l Working pressure: 4 bar Length: 4,8 m Width: 2,4 m Height: 3 m Weight: 2000 kg Blodpfx Aaezty Ifo Tsn Material: stainless steel Position: horizontal Features: DN80 Periphery: After consultation, we can equip the tank with the desired fittings as far as we have them in stock.

Condition: used, Year of construction: 1986, A vertical stainless steel tank with multiple cooling zones and various fittings. Most recently used as a fermentation tank for beer. Additional title: Coolable tank Bljdszty E Rjpfx Aa Tjn Capacity approx.: 11600 l Width: approx. 2,3 m Height: approx. 4,1 m Material: Stainless steel Position: vertical Base construction: on 4 feets Features: manhole; cooling jackets; spunging apparatus; sampling valve

Condition: used, Year of construction: 1981, Insulated and clad stainless steel pressure tank with various fittings. Additional title: insulated tank Capacity: 12800 l Pressure: 4 bar Temperature: 20 °C Length: 5,1 m Width: 2,1 m Weight: 2000 kg Material: stainless steel Position: hozizontal Bsdpsztyy Uofx Aa Teln Features: insulated and cladded, outlet DN65, manhole, 2 spray heads