Saluco AB

Condition: excellent (used), General Specifications The machine is equipped with two dividing heads and underwent a complete overhaul in 2021. siemens 840D SL Specification Value Manufacturer ZAYER Model KMU 8000 Machine Type CNC Machining Centre Table Surface 8,000 × 1,000 mm T-Slots (Number × Width × Spacing) 7 × 22 × 125 mm Longitudinal Travel (X-Axis) 6,300 mm Transversal Travel (Y-Axis) 1,000 mm (Special: 1,250 mm) Vertical Travel (Z-Axis) 1,500 mm (Special: 2,000 mm) Minimum / Maximum Distance from Table to Spindle Nose 23–1,523 mm (Special: 23–2,023 mm) Spindle Specifications Specification Value Spindle Speed Range 35–3,000 rpm Range I – Constant Torque 35–245 rpm Range I – Constant Torque (Special) 20–110 rpm Constant Torque 88 mkp (Special: 200 mkp) Range I – Constant Power 245–1,000 rpm Ijdpfx Adjz Sz Nmj Neih Range I – Constant Power (Special) 110–450 rpm Range II – Constant Power 980–3,000 rpm Range II – Constant Power (Special) 430–1,800 rpm Tool Taper MAS BT50 (Special: ANSI 50) Main Motor Power 30 HP Feed Rates Specification Value Working Feed Rate 6–5,000 mm/min Rapid Traverse 15,000 mm/min Tool Magazine Specification Value Tool Magazine Capacity 24 tools (Special: 30 or 60 tools) Maximum Tool Weight 20 kg* Accuracy and Capacity Specification Value Positioning Accuracy / Repeatability ±0.015 / 0.01 mm Maximum Table Load 20,000 kg Machine Net Weight 29,500 kg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table length: 5,000 mm, table width: 1,730 mm, table height: 300 mm, Equipment: documentation/manual, Special Offer Isdpfx Asz Spn Dsd Nsih Inspected and fully functional traveling column milling machine including clamping plate SHW UF 6 L Technical Data Travel distances • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (spindle head): 1,500 (1,200) mm Control system • CNC control: Heidenhain TNC 415 Feed rate • X, Y, and Z axes, continuously variable from: 2 – 8,000 mm/min Universal milling head in orthogonal design • Swiveling range of milling head mounting, motorized: 340 degrees • Swiveling range of milling head: 180 degrees • Tool holder: SK 50 Year of manufacture: 1992 Inspection: 2026 The machine has been put back into operation and inspected at MBM and can be demonstrated under power at D-73479 Ellwangen. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, the supply of spare parts, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – milling machine used – milling machine used – CNC milling machine used – drilling and milling machine used – milling machine metal used – metal milling machine used – used CNC milling machine – CNC milling machines – CNC milling machines – milling machine – large-part machining – large-part machining – large-part machining – CNC large-part machining – milling – shw – uf6 – uf 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg Isdsz I T Rmjpfx Ad Neih number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: used, Year of construction: 2017, operating hours: 15,218 h, functionality: fully functional, machine/vehicle number: 5639, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,600 mm, travel distance Z-axis: 1,900 mm, position of the milling head: 0.001°, mount diameter: 50 mm, rotational speed (max.): 4,000 rpm, torque: 2,000 Nm, coolant supply: 70 bar, spindle motor power: 60,000 W, Equipment: documentation/manual, rotational speed infinitely variable, SORALUCE CNC gantry milling and boring center with complete equipment x-10000mm y-3600mm z-1900mm - Automatic indexing milling head H 342 0.001° x 0.001° - Additional long angular head 90° - Capto C6 tool holder, horizontal/vertical with automatic tool clamping - Main drive 60KW 2000Nm - Machine weight 80 t - Safety package for the rear machine area - Safety package for the working area - Heidenhain iTNC 640 - Dynamic Active Stabilizer - Cross-axis compensation Iijdpfx Asz Iy Irjd Noh - Automatic head changing system - Milling slide extension z-1900mm - High-performance milling head 4000 rpm 1531Nm 0.001° x 0.001° - Additional long angular milling head 90° 2000 rpm 700Nm - Capto C8 turning tool holder horizontal / vertical with automatic clamping - Fixed storage station for 8 heads - Heidenhain handwheel - Coolant tank 200 liters - Automatic tool changer 120-fold - Increased tool weight 35 Kg - SORALUCE rotary table, diameter 3500mm with 2000mm travel, payload 40 t - Measuring probe M+H - Tool measurement M+H - Adaptive Control - Industry 4.0 machine status in real time - Swivel machining - 3-sided complete splash guard for the rotary table - Plate table 5000x3000x300mm - Chip conveyor - Teleservice remote diagnostics - 3D volume model - Interpolation turning HEIDENHAIN

Condition: used, Year of construction: 2002, Control Heidenhain x-travel 7.300 mm y-travel 1.500 mm z-travel 2.000 mm spindle tunring speed 4.000 U/min tool taper SK 50 Isdpfx Aez Ic Alsd Nsih number of tool places 40 Pos. Zustand: gebraucht Verfügbar: ab März 2027 Die Maschine ist unter Strom vorführbereit. Technische Merkmale & Zubehör: - Schaltschrank neu verkabelt - Orthogonal-Indexier-Fräskopf, 1° + 2,5° - Späneförderer - Kühlmittelanlage - Plattenfeld Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: good (used), Year of construction: 2001, Boring/milling machine MECOF Performa, serial no. 05 01 06, year of manufacture 2001, HEIDEHAIN TNC 430M control, X/Y/Z 2,000/1,200/1,000 mm, table 2,200x1,150 mm, universal milling head TBA4, dust extraction, coolant system, control cabinets, filter systems. Iiodpfez Icfmex Ad Noh

Condition: good (used), Year of construction: 1999, Boring/milling machine MECOF Agile M3, serial no. 07 99 05, year of manufacture 1999, FIDIA control system, X/Y/Z 6,000/1,250/2,000 mm, chip conveyor, indexing head, tool changer, chip filtration system. Ijdpfx Aoz Icc Eed Nsih

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 6 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 11,000 mm, total height: 5,430 mm, total length: 16,630 mm, table length: 2,500 mm, table width: 2,500 mm, torque: 2,045 Nm, table load: 40,000 kg, coolant supply: 40 bar, workpiece weight (max.): 40,000 kg, grinding spindle motor power: 46,000 W, rotary table diameter: 2,500 mm, Equipment: documentation/manual, CNC HEIDENHAIN iTNC530 Drive system: SIEMENS SINUMERIK TRAVEL Longitudinal (X): 10,000 mm Vertical (Y): 3,500 mm Cross (Z): 1,500 mm Table (V): 1,500 mm Axis support: Hydrostatic FEED RATES Working feed rates: 0 – 6,000 mm/min Rapid traverse rates for axes Y/Z/X: 25,000 mm/min SPINDLE Ram section: 700 x 500 mm Power: 46/37 kW Rotation speed: 5,000 rpm Torque: 1,691 – 2,045 Nm Morse taper: ISO 50 ATC Number of positions: 100 CLAMPING SURFACE: Dimensions: 10,000 x 2,500 mm Load capacity: 10,000 kg/m² TABLE Surface: 2,500 x 2,500 mm Travel: 1,500 mm Resolution (B-axis): 0.001° Load capacity: 40,000 kg Support: Hydrostatic Iiedpfx Adez Ib Els Neh HEAD Type: TUPC Spindle taper: ISO50 A/C axis: 0.001° Maximum torque: 1,210 Nm Maximum speed: 5,000 rpm Maximum power: 46/37 kW Coolant: Internal, 40 bar HEAD 2 Type: SEELS4 Spindle taper: ISO50 Spindle extension: 400 mm HEAD CHANGING PICK-UP STATION Positions: 3 Maximum workpiece weight: 79.3 kg Machine dimensions: 16,630 x 11,000 x 5,430 mm Year of construction: 2008 ACCESSORIES: - 3-position head changer - High pressure, 40 bar - Filtration system - Chiller - Renishaw RMP60 probe - Blum tool presetter - Electrical diagrams - Perimeter guarding - Chip conveyor - Operation and maintenance manuals - CE certification

Condition: like new (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 18,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,750 mm, mount diameter: 220 mm, spindle speed (max.): 3,600 rpm, rotational speed (max.): 1,800 rpm, table load: 75,000 kg, coolant supply: 70 bar, spindle motor power: 1,000 W, workpiece weight (max.): 75,000 kg, feed length W-axis: 1,400 mm, MOBILE COLUMN BORING MACHINE WITH DOUBLE TABLE FPT INDUSTRIE SPIRIT 450 Technical specifications Type: Mobile column boring machine with double table Brand and model: FPT Spirit 450 CNC: Siemens Sinumerik 840D Installation: 2017 Technical data Axis travels: Iedpfx Adoz Hl A Ee Noih X: 18,000 mm Y: 5,000 mm Z: 1,750 mm W: 1,400 mm B: 360° V: 3,000 mm U: 400 mm Maximum workpiece dimensions: Dimensions of each table: 4,000 x 3,000 mm Maximum machinable height: 5,000 mm Maximum load capacity: 75 tons Positioning accuracy: 0.05 mm Spindle speed: Up to 3,600 rpm with TUPC-M head Normal speed: 1,800 rpm Spindle power: 100 kW Tool types: ISO 60 C.F. ISO 50 ISO 50 C.F. CAPTO C8 Boring bar diameter: Ø220 mm RAM: 650 x 560 mm Accessories and automation 2 rotary-movable tables with dimensions 4,000 x 3,000 mm each. Automatic tool changer for ISO 60 and ISO 50, via a storage and management system with a KUKA anthropomorphic robot. Manual tool changer for CAPTO C8 for the D’Andrea UT5 head. Measuring probe installed on the machine: SONDA PROBE RPM600 (RENISHAW). Coolant and lubrication system Internal and external cooling via cutting fluid: Internal cooling of the boring bar tool: Pressure: 70 bar Flow rate: 80 l/min Internal cooling of the head tools: Pressure: 40 bar Flow rate: 28 l/min External cooling of the tool: Pressure: 4 bar Flow rate: 28 l/min Internal and external air system for cooling the tool when cutting fluid cannot be used. Heads and accessories TU144: Universal roughing head ISO 50, with angular indexing every 2.5°. Maximum spindle speed: 1,800 rpm. TUPC: Universal finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 1,800 rpm. TUPC-M: Universal multiplied finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 3,600 rpm. D’Andrea UT5 head: Head for turning with CAPTO C8 tools. Maximum spindle speed: 251 rpm. ISO 60 spindle: Main spindle. Maximum speed: 1,800 rpm. ISO 50 reduction for finishing: Maximum speed: 1,800 rpm. ISO 50 reduction for roughing: Maximum speed: 1,800 rpm. Long ISO 50 reduction: Maximum speed: 1,800 rpm. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, FOLDING MACHINE)

Condition: good (used), Year of construction: 2007, CNC traveling column milling machine Manufacturer: KEKEISEN Machine model: UFF 4000/16 Control system: Heidenhain iTNC 530 Year of manufacture: 2007 TECHNICAL DATA X-axis travel: 4000 mm Y-axis travel: 1400 mm Z-axis travel (vertical): 1600 mm Table area: 4200 x 1500 mm Isdpfx Ajz Ear Sod Nsih Table load: 10 t Spindle speeds (gear stages): 20 – 7000 rpm Spindle drive: 30 kW Rapid traverse: 18 m/min Machine weight approx.: 24.0 t + table EQUIPMENT FEATURES + CNC control system HEIDENHAIN iTNC 530 with fast MC424 + X-axis with hydrostatic guidance + B-axis with stepless swivel function + Air, water supply through the spindle and spray ring + Edge gap filter for water purification + Additional tank and pump for deep hole drilling at 80 bar + Minimal lubrication system + Chip conveyor with water pump and water tank + Cooling unit for hydrostatic guidance + Cooling unit for spindle and gearbox cooling + NC dividing head WALTER TABIH Evolution 320 EG, year of manufacture 11/2014, with horizontal table axis and tailstock MK6, center height 320 mm, max. Subject to changes and errors in the technical data and specifications.

Condition: used, Year of construction: 2002, machine/vehicle number: 6243, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Base machine / Travel ranges: X-axis machine stand 5,000 mm, Y-axis spindle head slide 2,100 mm, Z-axis spindle head 1,500 mm. Machine stand: Compact, torsion-resistant welded construction with hardened flat guide rails and telescopic steel covers against chips and coolant. Spindle head slide: Cast iron design with hydraulic weight compensation, guided via combined roller/sliding guides. Machine bed: Flat bed design with approximately 1,200 mm guide rail width and roller compact guides for high precision. Automatic universal milling head: CNC-swiveling milling head mounting 340 x 1°, Hirth gearing approximately 125 kN; milling head 180 x 1°, approximately 100 kN; milling spindle with hydromechanical tool quick-change system, clamping force approximately 25 kN; tool mounting SK 50, DIN 69871. Main drive: 37 kW at 100% ED, 53 kW at 40% ED; externally ventilated AC motor, 2-stage gearbox with automatic shifting; speed 22–4,000 1/min. Feed drives: Digital AC single drives; X/Y: 2–12,000 mm/min, Z: 2–15,000 mm/min. Control / Measuring systems: Central operation via Heidenhain TNC 430 M. Direct, non-contact linear measuring systems. Electrical system: EN 60204 / VBG 4, 400/230 V ±10%, 3 phases, 50 Hz, 24 V control voltage; connected load approximately 80 kVA. Control cabinet IP54, main motor IP55. Lubrication: Main gearbox/milling head drive oil circulation lubrication; main spindle grease long-life lubrication; guides/ball screws pulse central lubrication. Coolant: Internal/external coolant supply with paper band filter. Max. 50 l/min at 10 bar or 47 l/min at 16 bar; tank 500 l. Coolant/air switching. Oil cooler for temperature stabilization and increased manufacturing accuracy. Leveling system: Electromechanical via 2 vertical ball screws with separate drives, measuring systems and CNC axes. Work platform: Moving in the X-direction, with CNC control panel; electrically secured door with viewing window. Pick-up station: 10 tools; max. tool weight 25 kg, length 400 mm, Ø 125 mm, with free neighboring spaces Ø 250 mm. Clamping plate: 3,500 x 3,000 mm; T-slots 22 H12 DIN 650, spacing 250 mm; clamping surface accuracy grade 1 DIN 876. CNC rotary table: Clamping surface 1,250 x 1,600 mm / Ø 1,800 mm; Hirth division 360 x 1°; 6 longitudinal slots 22 H12, 2 guide slots 22 H7; T-slot spacing 160 mm; centering sleeve Ø100 H7 x 20 mm; max. 5 1/min; tilting moment 85,000 Nm; tangential moment 120,000 Nm; table load max. 11,500 kg. Additional equipment: Oriented spindle holder 360 x 1°; hinged band chip conveyor for X = 5,000 mm, feed width approximately 350 mm, discharge height approximately 1,250 mm; 3D wireless measuring probe; electronic handwheel HR 410 for 3 axes; pendulum machining for 2 work areas with monitored safety zones; manually movable splash guard. Collision monitoring: Brankamp CMS with piezoelectric strain gauge; if the process limit is exceeded, the axes are braked and the machine is switched off. Paint finish: Machine/control cabinet RAL 7035, milling head/spindle head RAL 5021; DD structural paint, semi-gloss, oil- and alkali-resistant. Power connection: 400 V, 3 phases, 50 Hz, 80 kVA, 160 A slow-blow; compressed air 4–6 bar, connection G 1/4. CE-relevant environmental protection to be provided on site; adapter plates for chip/coolant return are not included. Coordinate data: Y 730.0124. Documentation: Operating manual SHW-UF6L and Heidenhain TNC 430. Ijdpfx Adoz Dvyce Noih

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,400 mm, Complete with all assemblies required for installation and commissioning x = 7 m y = 1.6 m z = 1.4 m (800 mm + quill = 600 mm) General overhaul in 2007, year of manufacture 1991 Rapid traverse: 12,000 mm/min; w-axis: 6,000 mm/min Isdpfxsz Dunlo Ad Njih Fitted with new Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, and new control cabinets. ECOCUT 1 was only operated for a few hours thereafter. TDV 2 rotary table, max. workpiece weight 6 t / clamping area 1,000 x 1,000 mm TDV 3 rotary table, max. workpiece weight 12 t / clamping area 1,250 x 1,600 mm Accessories: 2 right-angle milling heads / chain-type automatic tool changer / platen table / full enclosure / Knoll hopper feeding system / extraction unit / coolant system with belt filter. Supplied with all BWF fixtures required for installing the machine bed and clamping plate.

Condition: good (used), rotational speed (max.): 2,050 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, table length: 600 mm, table width: 210 mm, Used conventional milling machine Make: Metba Model: MB-1 Features a 3-axis dimension display. Table: 600x210mm Iisdpfxsz Dtw So Ad Noh Travel: - Longitudinal with motor / Manual table: 290mm / 300mm - Vertical manual with bellows / without bellows: 270mm / 320mm - Vertical motorized with bellows / without bellows: 260mm / 310mm - Cross travel of the headstock, manual: 180+120mm Automatic feeds: - Vertical and longitudinal: 15 to 500 mm/min. - Slow feed: 7 mm/min. - Rapid traverse: 1200 mm/min. Speeds: 12 (From 45 to 2,050 rpm) Motor power: 5Hp (Three-phase 380V) Headstock type: Swivel / Universal (accepts arbor or vertical headstock). Common uses: Machining of small/medium-sized parts, prototyping, and maintenance or restoration work. Includes: - Vise with swivel - Collet chuck with various sets of collets - Various milling tools (See photographs of the material on the floor)

Condition: used, Year of construction: 2010, functionality: fully functional, For sale is a powerful and precise 5-axis CNC portal milling machine from the premium manufacturer Kolb, model Studioline M. The machine is ideally suited for model making, mold making, and large-format machining. Technical data & highlights: Manufacturer: Kolb Model: Studioline M Initial commissioning: March 2010 Iiodpez Ahrksfx Ad Njh Control system: Fidia, including handheld operating device / handwheel HPX21 Working area / travel ranges: X-axis: approx. 11,500 mm Y-axis: approx. 1,550 mm Z-axis: approx. 2,550 mm B-axis: ± 210° C-axis: ± 104° Spindle & tool: Tool holder: HSK 50A Spindle speed: max. 16,000 min⁻¹ Dynamics & drives: Linear axes (X, Y, Z): Feed rate up to 16 m/min Scope of supply & notes: Tables: Includes 2 square clamping tables. (Note: The 4 columns shown in the pictures are not included in the scope of supply.) Transport & handling: Dismantling & transport: The machine has already been dismantled; worldwide delivery is possible upon request. Loading: Will be carried out by us, free of charge. Condition & inspection: The machine is in a well-maintained condition, considering its age. An inspection is possible after prior arrangement. However, the machine has already been dismantled and is no longer powered. Subject to prior sale and errors in the technical specifications.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. KEY TECHNICAL DATA Machine year of manufacture: 2012 Capacities / Travel: Longitudinal (X): mm 8,000 Vertical (Y): mm 2,600 Lateral (Z): mm 1,500 Table size: Length: mm 10,000 Width: mm 2,500 Distance between grooves: mm 250 Paint finish: RAL 5011 (steel blue) RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Drive power: 100% ED 32 kW Spindle speed: min-1 20-4,000 Torque: Nm 900 Max. rapid traverse speed: X, Y and Z axes mm/min 25,000 Weight: kg approx. 34,200 Isdpfjzz H Emsx Ad Nsih Heidenhain iTNC530 Automatic milling head, diagonal, stepless Tool changer (60 magazine slots) Chip conveyor Coolant system 20 bar & internal coolant Preparation for NC rotary table RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a rigorous selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, position of the milling head: 360 x 1° en 180 x 1°, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 9,000 mm, total height: 4,900 mm, total length: 16,200 mm, table length: 5,500 mm, table width: 2,600 mm, table load: 10,000 kg, coolant supply: 16 bar, workpiece weight (max.): 10,000 kg, grinding spindle motor power: 30,000 W, feed length W-axis: 1,000 mm, SHW Powerspeed 5 with Heidenhain iTNC530, including: • X-8,000 mm, Y-2,100 mm, Z-1,300 mm • W-1,000 mm with C-axis, with 1600 x 1600 mm (suitable for a 10T table load) • Fixed clamping table with T-slots 22 mm, 5,500 x 2,600 mm • Orthogonal machining head SK50, max. 6,000 rpm, 360 x 1° and 180 x 1° • Power P = 30 kW at 100% ED / 41 kW at 40% ED. • Tool holder SK50 according to DIN 69871/72-AD • Heidenhain measuring scales in X, Y and Z axes • Chip conveyor in articulated belt design for X-8,000 mm • External and internal coolant supply with paper band filter and 1,000L clean water tank. High-pressure pump 16 bar • Air cooling along and through the spindle Iijdpfx Ajzz Hkpjd Noh • Tool magazine with 48 positions SK50 (max. Ø125 mm, max 400 mm length, max. 25 kg) • Shuttle machining capability with a fixed position for the removable partition • Dimensions L x W x H = 16.2 m x 9 m x 4.9 m (from the normal floor) • Electrical connection 400V / 50 Hz / 3Ph, 65 kVA and 3 x 95A slow-blow fuse

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 3,800 mm, ZAYER MOVABLE COLUMN MILLING MACHINE TECHNICAL SPECIFICATIONS Model: 30KCU 10000 AR CNC: Siemens 840D X: 10,000 mm Y: 1,600 mm Z: 3,800 mm Rotary table: 2500 x 2500 mm 2 T-slot tables: 2500 x 2000 and 4000 x 2500 mm Tool magazine: 60 positions Automatic head: 0.001º Motorized cabin for the operator PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE) Iisdpfx Adjzzxnto Nsh

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, MECOF MASTERMILL HPC3 X: 4000 MM Y: 1600 MM Z (VERTICAL): 3000 MM RAM SECTION: 500 X 500 ROTARY TABLE: 2000 X 2500 - TRAVEL 1500 MM - CAPACITY 30 TONS SPINDLE SPEED: 6000 RPM TOOL CHANGER: 80 POSITIONS HEAD: BI-ROTATIVE HEAD WITH AUTOMATIC MILLIMETER-ACCURATE POSITIONING HIGH INTERNAL SPINDLE PRESSURE - RENISHAW FOR TOOL MEASUREMENT CNC: HEIDENHAIN TNC 530i Ijdpfx Adozzp Dxj Nsih

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,850 mm, Manufacturer: FPT Iodpfx Adezznupe Noih Year: 2007 CNC Control: HEIDENHAIN Axis Travels X-axis: 7,000 mm Y-axis: 1,210 mm Z-axis: 1,850 mm Milling Head / Rotary Axes A-axis: 270° B-axis: -180° / +180° C-axis: 360° The machine is currently installed at our factory in Istanbul, Türkiye and is in working condition. The machine can be inspected under power at our facility. Further technical information, photos and videos can be provided upon request.

Condition: used, Year of construction: 2014, X-AXIS TRAVEL: 6000 MM Y-AXIS TRAVEL: 2000 MM Z-AXIS TRAVEL: 1250 MM ISO 50 DIN 69871-A MAX SPINDLE SPEED: 4000 RPM HEIDENHAIN iTNC 530 CNC ELECTRONIC HANDWHEEL 40-POT TOOL CHANGER AUTOMATIC INDEXING HEAD 1° x 3° Iijdpfezwlzrox Ad Nsh 2500 X 2500 MM ROTARY TABLE, 20 TON LOAD CAPACITY NR 2 2000 X 2000 MM FIXED PLATES CHIP CONVEYOR EXTERNAL AND INTERNAL COOLANT (20 BAR) YOM 2014

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Milling machine Year of construction: 2025 Work table, clamping surface: mm 1500 x 1000 Table height: mm 750 Number of T-slots: 7 Size of T-slots DIN 650: mm 18 Travel distances X-axis: mm 1500 Y-axis: mm 1000 Z-axis: mm 700 Distance: Table top edge - Spindle bottom edge min/max: mm 150 / 850 Main spindle drive for speed 8000 min-1 Tool holder: SK 40 AC motor, frequency-controlled: kW 26 at 44% duty cycle Speed range: min-1 15 – 8000 Torque: Nm 245 Coolant system Band filter system Feed drives X-axis AC servo motor: kW 3.5 Y-axis AC servo motor: kW 2.0 Z-axis AC servo motor: kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect position measurement system. Accuracy Positioning accuracy X and Y axes over 1000 mm: mm ± 0.0150 Repeatability X and Y axes: mm ± 0.0075 Positioning accuracy Z axis: mm ± 0.0150 Repeatability Z axis: mm ± 0.0075 Tool magazine, 24-position mounted on the left side of the machine - Tool positions: 24 Iijdpfx Aezvbaued Noh - Tool shank (DIN 69871 / 69872): SK 40 - Max. tool diameter: mm 76 - Max. tool length: mm 250 - Max. tool weight: kg 8 Machine control: Heidenhain iTNC530 Ex works, unloaded, plus statutory VAT. No guarantee.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,488 h, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, The table and the dust extraction system are included in the price! TECHNICAL DETAILS Travel range X-axis: 3,500 mm Travel range Y-axis: 1,100 mm Travel range Z-axis: 1,500 mm Table dimensions: 3,800 x 1,000 mm Spindle taper: ISO 50 Spindle speed: 5,000 rpm Iodozr H H Sspfx Ad Njih Tool positions: 40 Working feed rate: max. 15,000 mm/min Rapid traverse: 40,000 mm/min Maximum axis force (X, Y, Z): 1,500 N MACHINE DETAILS Control system: SELCA S 4045 PDH Operating hours according to image (as of: July 31, 2026) Total: approx. 29,147 h Partial: approx. 3,488 h A manufacturer's offer for dismantling and loading is available for €27,000.

Condition: used, Year of construction: 2019, Technical details: x-travel: 16000 mm y-travel: 4000 mm Iijdpfx Aszp Itbjd Neh z-travel: 1600 mm

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 20,000 m/min, table load: 1,000 kg, with multi-angle head for efficient and productive 5-sided machining of long parts, such as beams, profiles, tubes, etc. • Max. travel distances: X-axis: 6000 mm working range Y-axis: 800 mm working range Z-axis: 600 mm • Max. load capacity: 1500 kg • Main spindle drive power: 11 kW asynchronous motor • Main spindle speed: 8000 rpm • Tool holder: SK 40 • Rapid traverse rate X-axis: approx. 30000 mm/min • Rapid traverse rate Y-axis: approx. 20000 mm/min • Drilling capacity: ø 36 mm in S355 • Thread cutting: M20 in S355 • Servomotors for separate drive of the Y and Z axes with ball screw; X-axis with helical and hardened rack and pinion drive • Limit and reference switches in non-contact design • Spindle overload protection • Robust, precise cross table, generously sized • Safety device combined with light curtain and/or safety fence • Tool diameter: max. 100 mm • Tool length: max. 270 mm • Approximate footprint (L x W x H): 9050 x 3600 x 3150 mm • Total weight: approx. 8 tons Iijdpfxoznlkzo Ad Neh • Customer-side connections: Connection power: 30 kW / 63 A • Compressed air: 6 – 8 bar • Control system: Heidenhain TNC7 Basic • Main computer: MC 355 with 19" FullHD multi-touch screen • Mobile machine control panel with keyboard TE 350 - Tool changer, 24-position - Minimum quantity lubrication and/or coolant system - Chip conveyor including discharge chute Heidenhain options, such as: - Heidenhain electronic handwheel - Heidenhain 3D probing system for workpiece measurement - Heidenhain CAD import software option - Heidenhain tool length measuring system - 6 pcs. Mechanical-hydraulic vises MSH 150, clamping width 300 mm - Pendulum operation duo (divided working area) - Multi-angle head (moving, automatically interchangeable, controlled rotary axis 360°, lockable every 15°, automatic tool changer, 10-position, angle head length approx. 215 mm, usable length approx. 160 mm, machine-side mounting: SK 40 with 4-point clamping system, hydraulic, tool-side design: BENZ HSK 50 or comparable, translation 1:1, max. speed 3000 rpm, cycle operation, max. torque: 100 Nm, lubrication: grease/continuous, weight approx. 50 kg, minimum quantity lubrication with 1-2 nozzles.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, For the efficient and productive machining of long parts, such as beams, profiles, tubes, etc. • Max. travel ranges: X-axis: 4000 mm working range Y-axis: 400 mm working range Z-axis: 400 (600) mm • Max. load capacity: 1000 kg • Main spindle drive power: 11 kW asynchronous motor • Main spindle speed: 8000 rpm • Tool holder: SK 40 • Rapid traverse rate X-axis: approx. 30000 mm/min • Rapid traverse rate Y-axis: approx. 20000 mm/min • Drilling capacity: ø 30 mm in S355 • Thread cutting: M16 in S355 • Servomotors for separate drive of the Y and Z axes with ball screw; X-axis with helical and hardened rack and pinion drive • End and reference switches in non-contact design • Spindle overload protection • Solid, precise cross table, generously sized • Safety device combined with a light curtain and/or safety fence • Tool diameter: max. 100 mm • Tool length: max. 270 mm • Approx. space requirement L x W x H: 6660 x 4500 x 3400 mm • Total weight: approx. 5500 kg • Connections on the customer side: Connection power: 30 kW / 63 A Iijdpfx Adjznkipe Nsh • Compressed air: 6 – 8 bar • Control system: Heidenhain TNC7vBasic • Main computer: MC 355 Touch with control panel and integrated 19-inch TFT color flat screen - 24-position tool changer - Minimum quantity lubrication - Internal spindle cooling (IKZ) - Chip conveyor including discharge chute - Heidenhain electronic handwheel - Heidenhain 3D probing system for workpiece measurement - Heidenhain CAD import software option - Heidenhain tool length measuring system - 4 units of mechanical-hydraulic vises MSH 150, clamping width 300 mm - Pendulum operation duo (divided working area) Price on request.