Klutschew

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, grinding length: 1,600 mm, grinding width: 500 mm, workpiece weight (max.): 900 kg, grinding wheel diameter: 355 mm, rapid traverse X-axis: 1 m/min, travel speed (max.): 25 mm/min, TECHNICAL DETAILS Table size: 500 x 1,600 mm Max. grinding area: 500 x 1,600 mm Max. distance from spindle center to worktable: 600 mm Load capacity (with magnetic chuck): 900 kg Axis parameters Longitudinal feed speed: 5–25 m/min Cross rapid traverse (X-axis): 50–1,000 mm/min Cross feed, incremental: 1–20 mm/stroke Cross hand feed (MPG): 0.005 mm/click Vertical rapid traverse (Z-axis): 50–500 mm/min Vertical automatic feed: 0.005–0.04 mm/stroke Vertical hand feed (MPG): 0.005 mm/click Grinding wheel Dimensions (outside diameter x width x bore): 355 x 20~50 x 127 mm Spindle speed: 1,440 rpm Drive capacities Spindle motor: 7.5 kW Hydraulic pump motor: 3 kW Servo motor, cross feed: 0.5 kW Servo motor, vertical feed: 2 kW Coolant pump: 0.125 kW Lubrication pump: 0.06 kW Total connected load: 14 kVA MACHINE DETAILS Dimensions & weight Required installation space: 7,120 x 2,550 mm Height: 2,700 mm Machine weight: approx. 6,000 kg EQUIPMENT PLC + HMI automatic grinding control Integrated control for magnetic chuck Coolant tank Balancing arbor Grinding wheel flange and puller Hodpeyymkcjfx Abwok Wheel dresser stand MPG handwheels for Y/Z axis Operating manual Splash guard Standard grinding wheel Levelling wedges and bolts

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2449-01, grinding width: 1,350 mm, grinding height: 150 mm, feed rate X-axis: 12 m/min, grinding wheel diameter: 1,380 mm, TECHNICAL DETAILS Workpiece dimensions (length x width) min.: 30 x 30 mm Workpiece dimensions (width x height) max.: 1,350 x 150 mm Abrasive belt dimensions: 1,380 x 1,900 mm Disk diameter: 1,380 mm Abrasive belt unit speed: 8–22 m/s Disk unit speed: 10–22 m/s Feed rate (frequency-controlled): 2–12 m/min MACHINE DETAILS Electrical specifications Feed motor (frequency-controlled): 2.6 kW Abrasive belt (W): 18.5 kW Disk (RD): 12.9 kW Electrical connections: 400 V Frequency: 50 Hz Hedjyx Hhxspfx Abwok Control current: 110 A EQUIPMENT Disk unit (RD) with abrasive fleece disc 2 abrasive belt units (W) placed before and after the disk unit

Condition: ready for operation (used), Year of construction: 2000, operating hours: 125,000 h, functionality: fully functional, machine/vehicle number: Quickpoint 5002/10, Continuously operated in 3-shift mode from 2001 to 2024 23 years x 240 days x 3 shifts x 7.5 hours = approx. 125,000 hours (Operating hours stated without guarantee) The system is immediately available and accessible in Augsburg. KSS (coolant system) reconditioning by Junker novotecnic + spare parts Fully functional, cleaned, complete Fanuc control system Regular maintenance performed Start-up of the KSS system after a prolonged standstill may be prone to faults Hedpeyx E R Ssfx Abwek Documentation folder available Special accessories: - KSS system Junker novotecnic - 2x extraction units LTA II R/H - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating Price: Machine sale excludes dismantling and transport Please contact us regarding these services due to challenging conditions on site.

Condition: like new (used), ELB SMART BD10 STC is a CNC surface/profile grinder engineered for high precision, accuracy and reliability. Capacities: table 1360×590 mm, X1100 Z670 Y400 mm, grinding 1000×600 mm, table load 1000 kg. Specs: wheel Ø400×100 mm (bore127), 1450 rpm, spindle 10 kW, table 2–30 m/min stepless, feeds up to 2000/1500 mm/min, vertical rapid 1 m/min, 3×400V 50Hz, total 30 kW; machine ~6900 kg; dims 3550×2410×2660 mm. Accessories: coolant, paper filtration, oil‑mist extractor, magnetic plate 800×600, redressing/profile roll devices, wheel/flange sets, electronic handwheel. Achieves tight tolerances; suited to automotive, aerospace, toolmaking, medical, watchmaking. Hsdpfx Absyxn N Dewek

Condition: used, ELB PERFEKT BD 8 SPS is a surface grinder engineered for precision, high accuracy and reliability. Capacities: table 1360×590 mm; grinding length 1250 mm; max grinding 600×400 mm; travels X900 Z540 Y400; table load 900 kg. Specs: wheel 400×100 mm, 1440 rpm, bore 127 mm, spindle cone 60 mm; grinding spindle motor 20 kW; supply 3×400 V 50 Hz; total power 18.5 kW; machine weight ≈5400 kg. Accessories: paper filtration, electrical magnetic chuck 1200×600 mm, redressing device, lamp, central lubrication. Achieves tight tolerances; ideal for automotive, aerospace, tooling, medical and watchmaking. Hjdpfx Abjyxn Igjwek

Condition: used, ABA MULTILINE 1507 A is a profile grinding machine engineered for precision, high accuracy and reliable operation. Capacities: table 2000x600 mm, grinding area 1500x600 mm, table load max 2500 kg, table‑to‑spindle centre 900 mm; travels X1500, Z750, Y900 mm. Specs: stepless feeds X 2000–35000, Z 5–5000, Y 1–3000 mm/min; wheel speeds 50–2500 t/min; wheel Ø400x60 mm, bore 127 mm; spindle motor 26 kW; supply 3x400V 50Hz; total power 35 kW; weight ≈11000 kg; size 6465x3770x3000 mm. Accessories: paper filtration, magnetic plate 1500x700 mm, lamp, switch‑cabinet air conditioner. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace, medical. Hodpfxjyxn Iae Abwok

Condition: used, Year of construction: 2013, type of input current: AC, input voltage: 400 V, We are offering this used ELB-Schliff smartline surface grinding machine, year of manufacture 2013. Machine designation: smartline Machine number: 52362 Year of manufacture: 2013 Operating voltage: 400 V AC Hjdpfx Aoytrrqobwjk Frequency: 50 Hz Total connected load: 50 A Max. feed current: 22 A If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1984, functionality: fully functional, Table size 2000 x 650 mm Table longitudinal travel 2000 mm Stone transverse travel 650 mm Max. working height 550 mm Stone scraper integrated in the head Machine weight approx. 15,500 kg Dimensions (L x W x H) = 6000 x 2400 x 2900 mm Accessories - Magnetic table - Built-in dresser unit - Wheel with flange - Hydraulic unit Hodeyr Iqmopfx Abwsk - Separate control cabinet Good condition. The machine will be sold due to company liquidation.

Condition: used, dayligth 420 mm Magnetic field 420x200 mm grinding length . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hodpeyqtt Rjfx Abwjk We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1982, grinding length 2500 mm grinding width 600 mm workpiece height 800 mm Table dimensions 2500x600 mm vertical movement 800 mm throat 650 mm filter system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Hodpoyqtbbjfx Abwok apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1982, 1 used surface and guideway grinding machine Manufacturer: ELB Model: SWDE 30 U CNC Year of manufacture: 1982 / 1999 Control type: CNC Control: Mitsubishi 520 Location: NRW Country of origin: Germany Delivery time: short notice Hjdpsynglbsfx Abwek Delivery terms: ex stock TECHNICAL DATA Grinding length: 3000 mm Grinding width: 900 mm Workpiece height: 600 mm Electromagnetic chuck: 3000 x 900 mm Pole pitch: 18 mm Grinding wheel dimensions: Ø 500 x 100 mm Control: Mitsubishi 520 Total power requirement: 18.5 / 5.5 kW Machine weight approx. 19 t Space requirement approx. 9 x 4.5 x 3.5 m Shipping dimensions approx. 13 x 2.5 x 3.5 m

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, grinding length: 3,150 mm, grinding width: 800 mm, table load: 6,000 kg, grinding spindle motor power: 22,000 W, workpiece height (max.): 650 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Grinding length: 3,150 mm Grinding width: 800 mm Max. workpiece height: 650 mm Table surface dimensions: 3,150 x 600 mm Magnetic chuck dimensions: 3,000 x 600 mm Grinding wheel dimensions: 450 x 100 x 127 mm Max. table load: 6 t MACHINE DETAILS Hedpfxeylk E Hs Abwsk Control system: SIEMENS 840D Total power requirement: 70.6 kW Spindle power: 22 kW Dimensions & Weight Installation space required: approx. 11 x 3 x 2.4 m Machine weight: approx. 15 t EQUIPMENT Coolant system 2,500 l Magnetic holding force regulation Semi-automatic balancing system Note: The control unit boots up, but the MININI grinding software does not load for unknown reasons. The control hardware has been checked and is in order. Backup files are available.

Condition: excellent (used), Year of construction: 2022, CNC Surface, Profile, and Deep Grinding Machine ELB-Schliff smartLine BD15 KXT XC Control: Xpress Cube Year of manufacture: 2022 Grinding width: 600 mm Grinding length: 1,500 mm Grinding height: 500 mm Hedpoyk Tb Uofx Abwok Grinding wheel diameter: 400 mm Table load: 1,200 / 625 kg Spindle drive: 10 – 52 kW Spindle taper: 60 / 75 mm Speed range: 1,450 – 3,500 rpm Accessories: Belt filter system Coolant mist extraction system type VMN-V12 Balancing system Magnetic chuck

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Ziersch ZT 715 Surface Grinding Machine (2013) Manufacturer: Ziersch Type: ZT 715 Surface Grinding Machine Year of manufacture: 2013 Condition: used, good, still in production Grinding area: 1500 x 700 mm Magnetic chuck with air holes Dressing of angles/radii Coolant band filter system with magnetic separator Glass scale on vertical axis (Y) Hsdpeyiukuefx Abwek Column height raised from 600 mm to 700 mm Extraction system Further information to follow.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 04374, grinding length: 1,000 mm, grinding width: 700 mm, grinding wheel diameter: 406 mm, table load: 1,000 kg, controller model: SIEMENS SINUMERIK 840 D, TECHNICAL DETAILS Grinding length: 1,000 mm Grinding width: 700 mm Travel X-axis: 1,120 mm Travel Y-axis: 690 mm Travel Z-axis: 635 mm Maximum workpiece weight on table: 1,000 kg Table length: 1,200 mm Table width: 500 mm Maximum grinding height above table: 650 mm Grinding wheel diameter: 406 mm Grinding wheel width: 100 mm Grinding wheel bore: 152 mm Hodpfxsyhnv Ue Abwok Grinding wheel speed (fixed): 1,400 rpm Maximum table speed: 40 m/min Max. automatic cross-feed (infinitely variable): 2 m/min Max. automatic vertical feed: 2 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Connection: 50 Hz 3x 400 Volt Grinding spindle motor: 11 kW Total power requirement: 31 kW Dimensions & Weight Dimensions (L x W x H): 4,750 x 3,485 x 2,680 mm Machine weight: approx. 7,800 kg EQUIPMENT Coolant system Paper filter unit Electro-magnetic chuck (1,000 x 500 mm) Set of grinding wheels Lamp

Condition: good (used), Year of construction: 1993, ELB surface grinding machine Year: 1993 Magnetic table size: 1500x550 mm With automatic downfeed With wheel dresser Paper band type coolant tank Lots of grinding wheels Hedpfoygtiwex Abwok

Condition: good (used), Year of construction: 1985, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, total height: 2,200 mm, total length: 3,260 mm, total width: 4,410 mm, feed length X-axis: 1,150 mm, feed length Y-axis: 600 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 6 m/min, grinding wheel diameter: 400 mm, distance table to spindle center: 600 mm, table speed: 25 mm/min, table length: 1,200 mm, table width: 550 mm, grinding wheel width: 76 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 1,400 rpm, overall weight: 6,000 kg, table height: 1,050 mm, grinding spindle motor power: 8,948 W, rapid traverse X-axis: 1 m/min, travel distance X-axis: 1,150 mm, travel distance Y-axis: 600 mm, grinding spindle speed: 1,400 rpm, input voltage: 380 V, space requirement height: 2,200 mm, space requirement length: 3,260 mm, space requirement width: 4,410 mm, Equipment: rotational speed infinitely variable, We offer this used MICROSTATIC RT 100/60 surface grinding machine– Heavy Duty Precision Machine – Massive Cast Construction , year of construction 1985. Model: RT.100.65 Serial number: 728 Rated voltage: 380 V Rated frequency: 50 Hz Year of manufacture: 1985 The machine was operated in a production facility until November 2025. After production was stopped, the machine was taken out of operation and is currently stored in a warehouse. The machine was regularly serviced, operated in accordance with its intended purpose and maintained in good technical condition. It was used sporadically as a backup machine for the maintenance department in a large industrial production plant. The machine is complete and ready for recommissioning after standard service and inspection. Technical Data Hedpjyfgqxofx Abwek Model: T 100/60 Type: Surface grinding machine Working Ranges Max. longitudinal travel (X): 1150 mm Max. cross travel (Y, standard): 600 mm (optional up to 650 mm) Max. grinding length (standard): 1000 mm Max. grinding width (standard): 600 mm (optional up to 650 mm) Table Working surface: 1200 × 550 mm Distance table to spindle centerline (standard): 600 mm (optional 700 mm) Table height over floor: 1050 mm Feeds & Movements Longitudinal feed (infinitely variable): 1 – 25 m/min Cross feed (infinitely variable): 0 – 6 m/min Intermittent cross stroke: 1 – 20 mm Rapid traverse: 1000 mm/min Automatic increment at reversal: 0.0025 – 0.02 mm Grinding Unit Grinding wheel dimensions: 400 × 76 × 127 mm Spindle speed (50 Hz): 1400 rpm Motors Main grinding motor: 12 HP Hydraulic power unit motor: 5.5 HP Rapid traverse motor: 1 HP Coolant pump motor: 0.30 HP Weights Net weight: approx. 6000 kg Gross weight (sea-worthy packing): approx. 6900 kg Overall Dimensions (according to drawing) Length (A): 3260 mm Width (B): 4410 mm Height (C): 2200 mm Base depth (D): 2600 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Magnetic table surface: 1600 mm x 800 mm Maximum grinding length: 1600 mm Maximum grinding width: 900 mm Maximum grinding height: 800 mm Grinding wheel dimensions (od x id x width): Ø504 x Ø203.2 x 100 mm Weight: 12,500 kg Hjdpfeydxrljx Abwok

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 400 mm table-size 1.100 x 500 mm max. table load 1.000 kg dist. center of grinding spindle - table 600 mm table travel longitudinal 1400 mm table travel cross 550 mm table feed 1 - 30 m/min turning speed range - grinding wheel 1.000 - 3.000 U/min power capacity - grinding motor 11,0 kW grinding wheel size 400 x 80 x 127 mm magnetic clamping plate 1000 x 500 mm dressing device Tischabrichter voltage 400 V total power requirement 21 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 4,30 x 2,95 x 2,55 m band filter unit 1,80 x 1,30 x 0,80 m hydraulic power unit 0,90 x 0,75 x 0,95 m suction device 1,10 x 0,60 x 0,70 m - Serial-No.: Spindle ON: 11.742 hours - autom. vertical feed Hjdpfx Absya Ihhswsk - table dresser with compensation - electr. hand wheel - paper band filter unit with magn. separator - coolant mist extraction unit

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,600 mm, grinding width: 600 mm, New High-Precision Surface Grinding Machine, Kraft brand, Type FS 16060 SD Grinding area: 1600 x 600 mm Main Technical Data - Grinding length: 1,600 mm - Grinding width: 600 mm - Distance from table surface to spindle center: 820 mm - Table drive: Hydraulic - Table load (incl. magnetic chuck): 1,230 kg - Table speed, infinitely adjustable: 5–25 m/min - Max. table travel: 1,700 mm - Max. cross feed speed: 2,000 mm/min - Maximum cross travel: 610 mm - Max. vertical feed speed: 2,000 mm/min - Grinding spindle motor: 22 kW - Grinding wheel dimensions: 500 x 75 x 304.2 mm - Grinding spindle speed: infinitely variable - Machine weight (net): 8,500 kg - Machine width: 7,500 mm - Machine depth: 3,400 mm - Machine height: 2,700 mm - Electrical connection: 400 V / 50 Hz Features: see attachment. Standard Accessories: - 1 Standard grinding wheel 500x75x302.4 mm - 1 Standard wheel flange - 1 Wheel dresser incl. diamond dresser - 1 Balancing arbor - 1 Balancing stand - 1 Machine lamp - 1 Set of machine tools - 1 Documentation package incl. spare parts list - Machine in CE version (Metric version) Equipment features: - Surface grinding machine with automatic vertical feed - Grinding cycle: roughing – finishing – spark-out - Siemens S700 touchscreen panel and electronic handwheel for Y-axis - Digital readout for vertical axis Y and cross axis Z - Grinding spindle drive 22 kW (including stepless speed regulation) - Electro-magnetic chuck combination (L 1600 x W 600 mm) - Magnetic plate supply unit - Coolant filtration system (incl. coolant tank, paper band filter, and pressure pump) Installed special accessories: Hjdpfx Asyak H Hobwek - 1 Additional wheel flange for 500 x 75 x 302.4 mm grinding wheel - 1 Full enclosure. Completely closed machine cover with manually operated sliding doors incl. safety interlock - 1 Wheel dressing unit mounted on the spindle head (for straight dressing of the grinding wheel) - 1 Coolant mist extraction unit incl. base frame Precision and surface quality at an optimal price. Fully equipped and ready for grinding, suitable for universal use in a wide range of industrial and application sectors.

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm magnetic clamping plate 600x200 mm wheel diameter 220-300 mm machine weight ab. 2200 kg Hsdpfxsx U A Uge Abwjk

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 5,500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 750 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, table length: 5,500 mm, table width: 750 mm, Profile grinder MAEGERLE - MGC-L 560 Surface, Profile grinding machine 5600 mm CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Hjdpox Swqwofx Abwok Pendel opperation ( double table) Dresser automatic Table dresser X - Travel: 5500mm Y - Travel: 650mm Z - Travel: 750mm Table Length: 5500mm Table Width: 750mm Feed rate X-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Grinding stone dimensions:600 x 300mm Power: 115kW Speeds: 8000Rpm Cooling system: Yes Feed rate Y-Axis: 20000mm/min. Length: 10700mm Width: 4700mm Height: 3800mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table Hedpfxex N I A Ss Abwok • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.

Condition: reconditioned (used), Year of construction: 2010, TECHNICAL SPECIFICATIONS, MODEL T 40.20 CN Grinding length mm: 400 Grinding width with grinding wheel width mm: 225 Grinding height with new grinding wheel (on magnetic chuck) mm: 280 Magnetic chuck surface mm: 400 x 200 Longitudinal travel mm: 500 Transverse travel of the carriage under the table mm: 220 Adjustable table speed m/min: 1-30 Grinding wheel dimensions mm: Ø225 x 25 x 51 Grinding wheel rotation speed, fixed rpm: 3,000 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power 3 HP Hydraulic pump motor power 2 HP Net machine weight 1,500 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on SCHNEEBERGER linear needle slides and is controlled by a precision ball screw and a stepper motor. Vertical axis resolution: 0.001 mm. Dimension read on the display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The sub-table carriage slides on SCHNEEBERGER linear needle slides. The transverse movement is controlled by a precision ball screw and a stepper motor. Dimension read on the display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. - Longitudinal Table Movement A hydraulic cylinder and hydraulic unit located outside the machine control the table movement. VICKERS hydraulic pump SESINO air/oil heat exchanger for maintaining a constant hydraulic oil temperature Continuously adjustable table speed from 1 to 30 m/min. - Lubrication Centralized lubrication of all moving parts. - Paint Hsdpfx Asx N I A Esbwok Two-color paint: Safety white RAL 9003 + sky blue RAL 5015 ACCESSORIES - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various phases of the cycle: roughing, finishing, polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with LOSMA type DTE paper filter external to the machine. - Air/oil heat exchanger for hydraulic oil temperature - SPD electropermanent magnetic plate with 5+5mm fine poles, dimensions 400x200mm - Automatic dressing device mounted above the head. Hydraulic movement – ​​micrometer increments (0.001mm resolution) via stepper motor - Programmable automatic dressing operations within the cycle, with automatic grinding wheel wear compensation - Hydraulic unit located outside the machine - Grinding wheel flange with balancing shaft and grinding wheel - Standard machine guards

Condition: refurbished (used), Year of construction: 2009, TECHNICAL SPECIFICATIONS, MODEL T 60.35 CN Rawable length mm: 600 Rawable width with grinding wheel width mm: 390 Rawable height with new grinding wheel (on magnetic chuck) mm: 400 Magnetic chuck surface mm: 600x300 Longitudinal travel mm: 750 Transverse travel of the carriage under the table mm: 350 Adjustable table speed m/min: 1-30 Gripping wheel dimensions mm: 400x40x127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power: 7.5 kW Hydraulic pump motor power: 2.2 kW Net machine weight: 3,000 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on linear needle slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Vertical axis resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Dimension readout on the display. Display resolution: 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The transverse movement is performed on hydrostatic slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Dimension readout on the display. Display resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Electronic handwheel for manual movement. - Longitudinal table movement Two hydraulic cylinders and a hydraulic unit located outside the machine control the table movement. Rotation speed is continuously adjustable from 1 to 30 m/min. - Lubrication Located outside the machine, this system controls the table movement and the lubrication of all moving parts. ACCESSORIES - LODI CNC type T 2020W with 12.1" graphic display (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, and polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with paper filter and high-pressure pump - Mist extractor (capacity 2,400 m³/h) Hedjx N I Aropfx Abwok - Electro-permanent magnetic plate, dimensions 600 x 300 mm - Hydraulic dressing device above the head with CNC-programmable automatic dressing operation and automatic grinding wheel wear compensation. - YASKAWA frequency converter for continuous adjustment of grinding wheel speed and for accelerating braking at rest. - Grinding wheel flange with balancing shaft - Complete work area enclosure - Work light