Karl Karletshofer GmbH

Condition: used, Wickman 1-3/4" 6-Spindle SN: 16814 Electromagnetic Clutch Stock Reel and Stand Threading Chip Conveyor 6 Cross Slides 4th Pos. Logan Universal Threading Cleaned and Painted Recently taken out of Production Dodpeyzkf Hsfx Abwjcf Checked under power Can be equipped for your requirements

Condition: used, functionality: fully functional, Year of construction: 1997, operating hours: 25,000 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine Arkus12 For sale is a profile bending machine, model Arkus12, manufactured in 1997. The machine is equipped with the reliable PC100 control system (DOS) and has recently undergone a complete overhaul, including full servicing. With approximately 25,000 operating hours, the machine is in good technical condition and available for immediate use. It is ideal for precise and dependable profile bending tasks in industrial applications. Dsdeyzik Uepfx Abwocf Technical data: Machine type: Profile bending machine Model: Arkus12 Control system: PC100 (DOS) Year of manufacture: 1997 Operating hours: approx. 25,000 hrs Condition: Completely overhauled including service Availability: Immediate Note: The sale is made without any warranty.

Condition: ready for operation (used), Year of construction: 1959, functionality: limited functionality, The two-roll precision rolling mill exerts a pressure of 26,000 kg and features roll core diameters of 125 mm and a total roll body length of 200 mm. The effective strip width is 175 mm, within which a uniform pressure distribution is maintained. The commission number is 59024, which the manufacturer can use to retrieve the precise construction drawings. Operation ceases after some time. It is suspected that the electrician should take this into account: Connection type: Three-phase 380V/400V (3 phases + neutral + earth). High-power socket: Due to the current rating (22.8 A), a CEE 32A socket (red socket) is required. Circuit protection: The motor must be protected with slow-blow fuses (e.g., C-type circuit breakers or Neozed fuses) to handle the high inrush current. Protection with 32A (three-pole) is recommended. Motor protection: A motor protection switch, set to the nominal current (22.8 A), is absolutely necessary to protect the motor from overload. Important Note: The data (71.5 rpm, 5 Hz) indicate either a very slow-running special motor or a motor operated by a frequency inverter. Commissioning should be carried out by a qualified electrician. Dcsdpfxoyzh Tbs Abwof

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Piesok Guillotine Shear Type NTH 3150/16 Year of manufacture: 1977 Cutting length: 3150 mm Material thickness: 16 mm Electric rear stop: 1000 mm Drive power: 26 kW Weight: 28 t Offered at a price of EUR 6,500—plus VAT, ex works location. Djdeyzdvxspfx Abwecf

Year of construction: 1984, condition: ready for operation (used), Immediately available from business closure: Motorized four-roll plate bending machine Manufacturer: RAS Model: 44/10 Year of manufacture: 1984 Bending length: 1020 mm Material thickness up to 4 mm Drive power: 1.5 HP Weight: 800 kg Price: EUR 1,750 plus VAT, ex location. Dedpfx Aeyzdvrsbwecf

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Dodpfjyzdvlex Abwecf Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, MEYN/BAADER 61 Knife sharpener for poultry. Manufacturer: BAADER GmbH Model: BA 61 Year of production: 2000 Technical condition: functional Dcjdpeyy Slljfx Abwsf Condition: very good Power supply: 230 V, 50 Hz Power: 0.27 kW Speed: 1450 rpm poultry/sharpening/cut up/MEYN/BAADER

Year of construction: 2019, condition: ready for operation (used), Automation Buchsenpresse manufactured in 2019. This EMS model features a maximum joining force of 50 kN and a joining stroke typically ranging from 100 to 300 mm. It utilizes an electromechanical servo drive for precise force and displacement control. If you are looking to get high-quality joining capabilities, consider the EMS Automation Buchsenpresse machine we have for sale. Contact us for further details. Dcedpfx Aeyyyk Asbwsf • Joining stroke: typically 100–300 mm • Frame options: C-frame or gantry frame (custom design) • Guide/drive: Backlash-free linear guide, preloaded ball screw drive, electromechanical servo drive • Mounting interfaces: Customer-specific workpiece and tool holder • Joining modes: Force-controlled, displacement-controlled, combined force–displacement • Process monitoring: Force–displacement diagram (XY curve), limit curve monitoring, OK/NOK evaluation • Accuracy: Force typically ±1% of final value; displacement typically ≤0.01 mm • Operation: Touch panel (HMI) • Interfaces: Digital I/O • Sensors: Integrated strain gauge force sensor (50 kN); displacement measurement via absolute or incremental encoder on the spindle drive

Year of construction: 2015, condition: used, functionality: fully functional, The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Djdpfx Ajyyxp Rebwecf

Condition: excellent (used), functionality: fully functional, For sale: Used Tejero H-130 CNC mandrel tube bending machine. The device is in very good technical condition and ready for operation. A very comprehensive set of tools, as seen in the photos, is included with the machine. Machine weight approximately 7.5t. Machine external dimensions: 7200x2600x1600mm. Total power: 20kW. Three bending speeds. Ability to set 10 different angles in automatic bending mode. Tube bending up to 139.7mm diameter and 5.6mm wall thickness. Multiple features facilitating the bending process. Dcjdjyyvhdopfx Abwof

Year of construction: 1999, condition: ready for operation (used), Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible. Dcjdpsyypl Nefx Abwof

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 12,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,500 rpm, spindle diameter: 160 mm, travel distance W-axis: 1,000 mm, PEGARD PRECIRAM 4 TX Dcedpfx Aeyynitobwsf CNC: SIEMENS 8401 D 80-position tool magazine Internal spindle coolant 2 automatic orientable angle heads – Pick-up heads

Condition: excellent (used), Optimatic rsmo 090 -tensioning, leveling and back correction for bandsaws. Fully functional. Year of manufacturing 2011 Vollmer Depomatic-System ALIGATOR . Perfect working condition, 1997 , equipped with induction heater for annealing welded teeth Dcsdpfx Asyym S Tsbwsf

Condition: used, functionality: fully functional, Year of construction: 1991, working width: 3,050 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 15 mm, input voltage: 380 V, input current: 64 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 220 V, oil tank capacity: 650 l, We are offering this used Eisen u. Hammerwerk ISS 16-31 guillotine shear, year of manufacture 1991. Dcodpfx Abeyyg Izewof Machine type: ISS 16-31 Capacity: 16 mm Working length: 3050 mm Year of manufacture: 1991 Serial number: 104849 Power supply: 3~ Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Rated current: 64 A Main fuse rated current: 80 A Wiring diagram no.: 103-1230/7 Hydraulic oil capacity: 650 L If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, for extended medium to heavy-duty applications. With switchable power levels and mode control for a wider range of uses. • Cleans and passivates in a single operation • Can process any thickness of stainless steel • Electropolishing possible • Low operating costs • Cost-effective consumables and spare parts, saving time • Up to 10 times faster than pickling paste • No reworking required • No need for regrinding or polishing Djdpsyx Sq Ejfx Abwecf Flexible and robust • Ideal for large objects • Durable high-performance brush • Splash-proof housing • Machine does not overheat • Cable can be extended up to 12 meters • Operates at 250 watts • Can be powered by a generator

Year of construction: 2006, operating hours: 1,357 h, condition: ready for operation (used), number of axes: 3, This 3-axis Rasi S 80.6 L G-V3C50 was manufactured in 2006. It can bend pipes with a diameter ranging from 4 to 82 mm and features a bending radius of 240 mm. The machine is lightly used and comes with many tools included. If you are looking to get high-quality bending capabilities, consider the Rasi S 80.6 L G-V3C50 machine we have for sale. Contact us for further details. • Pipe bending capacity: 4–82 mm diameter • Bending radius (RM): 240 mm • Nominal voltage: 400 V • Nominal current: 26 A • Condition: Lightly used Additional equipment • Included tooling set (many tools included) Dsdpjyx Hdgjfx Abwjcf

Year of construction: 2013, condition: used, Make: EXTRUDEX, Year of manufacture: 2013, comprising: Granulate drying/conveying unit, Manufacturer: Koch, Model EKO300F, Year: 2013, Serial No.: 4459, microprocessor control, drying cylinder ETB1000, capacity: 1,000 l, vacuum conveyor, 2 dosing/conveying units, IFS exhaust air system, single-screw extruder, 3-part cooling section, refrigeration unit by Daikin, diameter measuring system by Zumbach, inkjet coder by VideoJet, Model 1710, microprocessor control, flame treatment unit by Hill, Model MF20-2-1, Year: 2013, caterpillar take-off by Extrudex, Model BC105, discharge conveyor belt, discharge chute, waste container, mobile, forklift pockets, peripheral devices, control cabinets, set of long part racks, 2 accessory cabinets, 2-door, industrial vacuum cleaner, workbench, 1,500 x 700 mm with base cabinet, 3 drawers. Dcsdpfsyx Eytox Abwef

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Dodpfx Ajyx Exvebwjcf

Year of construction: 2023, condition: used, Make: H2O, Model: Vacudest XS Clearcat, Year of manufacture: 2023, Max. treatment capacity: 300 m³/year, Machine control with Vacutouch touch display, 5 IBC tanks, 3 IBC drip trays, manufacturer: CHEMO, year: 2023, capacity: 1,100 l, CIP system, piping, pump, operating hours: 4,868. Djdoyx Excspfx Abwjcf

Year of construction: 2019, condition: used, Make: FELSS, Model: CBC, Year: 2019, Serial No.: 18-2112B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, max. tube length 1,200 mm, 2 bending units, PC control with touch display, operator console, double-deck feeding system, loading station, robot, make Yaskawa, type YR-MA1440/MH12-A00, robot controller, type DX200, teach-in terminal, small parts feeding system with loading bunker, vibrating feeder bowl, singling unit, removal/alignment station, box outfeed line L 7,000 mm, box size 350 x 250 x 150 mm, control cabinets, protective fence/plexiglas enclosure, component provision platforms/shelves. Dcjdpfx Abjyx Ev Ujwjf

Year of construction: 2016, condition: used, Manufacturer: FELSS, Model: CBC, Year of manufacture: 2016, Serial number: 15-5164B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, Maximum tube length: 1,200 mm, 2 CNC bending heads, PC control with touch display, operator console, double-deck feeder system, loading station, robot manufacturer: Yaskawa, type YR-MA1440/MH12-A00, robot controller type DX200, teach-in terminal, small parts feeder with supply hopper, vibration feed bowl, singling station, unloading/alignment station, crate removal conveyor: length 7,000 mm, crate size 350 x 250 x 150 mm, switch/control cabinets, safety fence/Plexiglas enclosure, staging platforms/racks, label printer manufacturer: CAB, model eos 1, barcode scanner manufacturer: Zebra, model Omni tc15. Dcsdpfxjyx Euqe Abwjf

Year of construction: 2024, condition: used, Make: AJAX TOCCO, Model: 23-13295, Year of manufacture: 2024, Serial no.: 23-13295, Connected load: 48 kVA, Converter output: 38 kW, Output frequency: 10,000 - 40,000 Hz, PLC system control with operator panel touch, 4 soldering stations, Cooling unit by Hyfra, type Sigma 18-S-RF-P, 2 extraction hoods, control/electrical cabinets, safety devices, 2 load carrier trolleys made from aluminum profile system, inspection table, mobile, 2,500 x 700 mm, 3 tiers, perforated metal wall, skylight, magnifier lamp, label printer by CAB, type EOS1, barcode scanner MDE by Zebra, type Omnii XT15 Dsdpfx Ajyx Etyebwscf

Year of construction: 2014, condition: used, Make: ROSENBERGER UNISON, Type: RB Breeze50, Year of manufacture: 2014, Machine No.: M1322, CNC bending head, Bending capacity Ø 50 x 4 mm (steel), Any bending planes up to total tool height of 210 mm, Bending radius 125 mm, mandrel, L 3,000 mm, PLC control, touch display, safety devices, steel cabinet, double-door, internal/external tube deburring station. Dcodpeyx Eq Ejfx Abwjf

Condition: excellent (used), Professional hydraulic set from the renowned German manufacturer LUKAS Hydraulik GmbH, designed for technical rescue operations and industrial applications. Condition: - Used, fully functional and tested equipment - Shows normal signs of use - Good technical condition – ready for operation - Visible signs of wear on the housing (do not affect performance) Technical data: - Manufacturer: LUKAS Hydraulik GmbH (Germany) - Set type: hydraulic rescue set - Working pressure: up to 630 BAR - Power supply: 230V (single phase) - Standard: DIN 14751 Included in the set: - LUKAS hydraulic pump - Hydraulic cutter - Hydraulic spreader - Hydraulic hoses - Hose/cable reel - Quick couplings - Transport frame Application: - Road rescue (volunteer/professional fire departments) - Rescue and technical operations - Industrial and demolition work - Cutting and spreading of steel structures Advantages: - Robust German LUKAS quality Dcodpfxeyxr I Ds Abwjf - Very high operating force (up to 630 BAR) - Complete set – ready for use - Mobile design with hose reel

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame Dcjdeyxr Dxjpfx Abwef ——— Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use