Obsthof Gestorf

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 27 / 16, overall weight: 1,500 kg, power: 2.2 kW (2.99 HP), space requirement height: 4,150 mm, space requirement length: 5,100 mm, space requirement width: 2,000 mm, The machine is easy to operate, highly efficient, and not only threshes leaves but also partially separates them from stems and classifies them. It delivers excellent processing results for mint, lemon balm, sage, thyme, oregano, and rosemary. The machine can be operated in two different modes: as a threshing and crushing machine or as a vibrating separator. This is a major advantage, as it allows two processing steps to be covered with one machine. 1. Threshing and Crushing Operation To operate the REBLER LGU 304, a conveyor belt is required. The material is fed by a VARIO 608 conveyor belt into the threshing and crushing section, where the leaves are separated from the stems and the material is sorted into five different fractions. 2. Vibrating Separator Machine use for separation: The machine functions as a vibrating separator by simply changing the conveyor belt angle and feeding the material through the first opening. The machine is equipped with four sieves and enables classification of the processed material. Sieve changes are quick and easy. Sieve sizes: 17 sieves (12 mm, 10 mm, 8 mm, 6 mm, 5 mm, 3 mm, 2.5 mm, 2 mm, 0.8 mm, 0.5 mm, 0.3 mm, NLC 10x4, MLC 12x18/6, NLR 54x82/18, NLR 22x44.5/12, NLC 54x82/18 & LPC 20x40, NLC 15x24/8) and five additional PETERSON sieves for FS 3004 Technical Data LGU 304: Dimensions (L x W x H): 5,100 mm x 2,000 mm x 4,150 mm Sieve length: First, second, and third sieve: 2,800 mm; fourth sieve: 2,650 mm Sieve width: 950 mm Number of sieves: 4 Approximate machine weight: 1,000 kg Total electric motor power: 2.2 kW Voltage: 380 V Electronic control: 2.2 kW LG 304 LEAF REMOVER ADAPTER Electric motor power: 1.5 kW Infeed roller drives: 2 x 0.55 kW Voltage: ~ 380 V Inclination angle adjustment: Continuously between 20 and 40 degrees LGU Screening machine FS 3004 with threshing and rebbler section Individual components: - VARIO 608 conveyor belt with dosing hopper (infeed conveyor) - FS 3004 screening machine with sieves and vibration control - Threshing and rebbler section with PA drums for FS 3004 - TRIPLE 202 conveyor belt (discharge conveyors) - Control cabinet - Covers for FS 3004 VARIO 608 conveyor with feeder Year of manufacture conveyor: 2020 Year of manufacture LGU: 2016 Njdpfx Aoyl T Anehwecn If you have any questions or would like to arrange a viewing, we are available at any time. Shipping by freight forwarder is possible upon request.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 3102, Meijn egg-shell centrifuge For separating eggshells from liquid egg by processing whole eggs. Nedpfx Ajylbu Eohwecn 30,000 eggs/eggshells per hour 2.2 kW Dimensions (L x W x H): approx. 1150 x 750 x 1750 mm (can be lowered by approx. 350 mm) Good working condition.

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, Manufacturer: Westfalia (GEA) Model: SAMM 15006 Year: 1977 Product: Milk separator, currently fitted with disc stack for whey clarification Capacity: approx. 15,000 l/h Nedpfx Ajyhdwbohwscn Condition: good, fully functional

Condition: ready for operation (used), Year of construction: 2008, A Baader refiner for the separation of soft and solid components is available. Throughput capacity: approx. 800kg/h, connected load: 3kW, drum hole diameter: 1mm, machine dimensions X/Y/Z: approx. 1100mm/900mm/1300mm, weight: approx. 450kg. An on-site inspection is possible. Ncjdpjygmbgofx Ahwen

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 22/16, overall weight: 600 kg, power: 4.65 kW (6.32 HP), space requirement height: 1,950 mm, space requirement length: 3,362 mm, space requirement width: 1,774 mm, Herb Cutting Machine S 350 W This machine is designed for cutting fresh and dried herbs. It offers a wide range of applications and is ideal for processing lemongrass, mint, parsley, chamomile, St. John's wort, mountain tea, and similar herbs. Wide range of cutting sizes: Thanks to precision blades and an efficient herb feeding system into the cutting zone, as well as flexible control of the conveyor belt speed and blade rotation speed, the desired cut size can be set from just a few millimeters up to 10 cm. The machine features two stacked conveyor belts. The upper belt is movable and inclined. It guides the herbs into the cutting zone and compresses them during the cutting process. The cutting area consists of a rotating blade (with two or three cutting arms) and two counter blades. Electronic control: Both conveyor belts are equipped with electronic speed control, allowing you to adjust the cutting size of the herbs. Speed is controlled via a frequency converter. Adjustment is made using a potentiometer, with set values displayed on a screen. Technical Data S 350 W: Dimensions (L/W/H): 3362 mm x 1774 mm x 1950 mm Approximate weight: 800 kg Blade motor: 3 kW / 380 V Blade motor – frequency controller: 3.7 kW Belt motor: 3 x 0.37 kW / 380 V Belt motor – frequency controller: 2 x 0.65 kW Speed control - blades: Electronic Ncedpfx Asyghgqshwsn Speed control - belts: Electronic Belt width: 350 mm, made from food-safe materials Capacity: up to 3,000 kg/h fresh herbs, up to 600 kg/h dried herbs Material: Black steel; all parts in contact with the herbs are made of stainless steel and materials that comply with all health standards. Sound pressure level (A and C scale): At measurement points per reference standards in the workplace, the following values are measured during operation: LAeq(A) = 70.6 dB(A) LCeq(C) = 81.48 dB(C) LCpeak = 94.86 dB(A) Year of manufacture: 2016 If you have any questions or would like to arrange a viewing, please contact us at any time. Shipping by forwarding agent is possible by arrangement.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 8/16, overall weight: 450 kg, power: 4.1 kW (5.57 HP), space requirement height: 26,000 mm, space requirement length: 431,000 mm, space requirement width: 15,000 mm, The D-300 is a machine designed for slicing whole fruits and herbs, such as rose hips and marjoram, using blades. Dosing can be performed manually or via an external conveyor belt (not included). The machine is equipped with various sieves to adjust the degree of fineness. Sieve sizes: 1x 10 mm 1x 8 mm 1x 6 mm 1x 4 mm Nsdpfxeygha Re Ahwjcn 1x 2 mm 1x 1 mm 1x 0.5 mm Dimensions: Length: 4.31 m Width: 1.5 m Height: 2.6 m Weight: 450 kg Power: 4.1 kW Year of manufacture: 2016 If you have any questions or are interested in viewing the machine, we are available at any time. Shipping via freight carrier can be arranged by agreement.

Condition: ready for operation (used), Year of construction: 2003, A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible. Ncsdpeydpz Defx Ahwon

Condition: like new (used), functionality: fully functional, An industrial decanter is a type of centrifuge used to separate solids and liquids in industrial processes, such as wastewater treatment, olive oil production, brewing, starch extraction, etc. Production may vary depending on the product. Ncodsx S Hr Dopfx Ahwen

Condition: like new (used), This equipment is ideal for sterilising various types of juices, fresh milk, beverages, wines, and other liquid products. It is also suitable for soya milk and animal feed liquids. When used in combination with a homogeniser, it is capable of processing high-viscosity materials such as sweetened condensed milk, among others. The high-pressure homogeniser is a type of ultra-fine grinding and emulsification equipment. It operates by subjecting the suspension to high pressure, then passing it through a unified decompression zone. Bulging, implosion, shearing, and high-speed impact occur in an adjustable flow-restriction gap. This pulverises particles and oil droplets in the liquid to a very fine size, resulting in an ideal emulsion and a homogeneously dispersed liquid. This process integrates the effects of ultrasonic atomisation, colloid milling, ball milling, and jet milling. Homogenisation enables improvements in product stability, consistency, mixing properties, absorption, nutritional value, shelf life, flavour, colour, and palatability. Nsdpox S E E Asfx Ahwscn

Condition: like new (used), Year of construction: 2019, functionality: fully functional, control type: PLC-controlled, Auction of a medicinal and spice processing line. The line is still in its original packaging and has never been used. The video shows a sample machine. The offered line consists of the following components: - ST II VIBRO W - LGU 252 - VIBRO 14 - OGK 1003-A - DOUBLE ZIG-ZAG Control system: PLC-controlled Processing capacity: 20 plants in 5–6 fractions ST II VIBRO W TECHNICAL DETAILS - Sieve length: 1,200 mm - Sieve width: 800 mm - Number of sieves: 2 - Sieve inclination: continuously adjustable from min. 5° to max. 10° - Screen perforation: according to customer requirements MACHINE DETAILS Drive - Type of drive: vibratory motors - Motor power: 2 × 0.18 kW - Motor power: 2 × 0.60 kW Machine weight: approx. 480 kg Nedjx Nnawjpfx Ahwecn LGU 252 TECHNICAL DETAILS - Number of sieves: 2 - Sieve size: 2,500 × 800 mm - Sieve perforation: "Peterson" - Inclination adjustment: continuously from min. 20° to max. 40° - Conveyor belt with cleats: 600 mm MACHINE DETAILS - Dimensions (W × L × H): 5,000 × 1,700 × 3,000 mm Drive - Motor power: 0.75 kW - Motor power: 1.5 kW - Motor power: 1.1 kW - Motor power: 2 × 0.55 kW - Operating voltage: 380 V OGK 1003-A TECHNICAL DETAILS - Number of sieves: 1 - Number of blades: 2 - Throughput: min. 40 kg/h to max. 100 kg/h MACHINE DETAILS - Dimensions & weight - Dimensions (W × L × H): 2,440 × 1,914 × 2,525 mm - Machine weight: approx. 970 kg - Motor power: 1.1 kW - Operating voltage: 380 V DOUBLE ZIG-ZAG TECHNICAL DETAILS - Throughput: max. 150 kg/h MACHINE DETAILS - Dimensions (L × W × H): 2,400 × 2,000 × 5,000 mm - Exhaust fan: 1 GENERAL EQUIPMENT - Control 208 - PLC - Aspirator I-6 - Control 308 - Belt conveyors (12 units) - Air technology - Magnets - Speed controllers Note: The machine has been dismantled and is in storage (see photos).

Condition: good (used), Year of construction: 1991, machine/vehicle number: 1698 250, Milk skimming separator, capacity: 30.000 liter per hour. Nsdpfxjxxyc Ts Ahwjcn Including all tools for maintenance.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, overall weight: 155 kg, As-new system, has been used very rarely. Ncedpfx Ajw S Ht Hjhwsn

Condition: used, Year of construction: 1977, functionality: fully functional, power: 4 kW (5.44 HP), rotational speed (max.): 9,200 rpm, input frequency: 50 Hz, Westfalia centrifuge/separator type SA7-06-076 with control cabinet (electronic control) 9,200 rpm; year 1977, serviced annually; includes relevant tools, spare seals, and operating manuals. (Unit has been dismantled, cabling not included.) Ideally suited for mobile juice presses (lightweight, compact size, relatively low power consumption). Nsdpfx Ahew S Dqcewscn

Condition: refurbished (used), Year of construction: 2022, operating hours: 24 h, functionality: fully functional, machine/vehicle number: 01, overall weight: 2,800 kg, type of input current: AC, temperature: 90 °C, power: 45 kW (61.18 HP), rotational speed (min.): 4,600 rpm, rotational speed (max.): 4,600 rpm, space requirement height: 2,159 mm, space requirement length: 2,362 mm, input voltage: 220 V, space requirement width: 1,727 mm, control cabinet width: 1,016 mm, control cabinet length: 812 mm, control cabinet height: 2,336 mm, input frequency: 50 Hz, Equipment: documentation/manual, oil mist separator, rotational speed infinitely variable, GEA Westfalia Self-cleaning Separator Capacity: 600 TPD Model: RSE 220-01-777 Condition- Rebuilt Njdpew Rakijfx Ahwscn Along with PLC Panel along with Danfoss Frequency drive and Fully touch type coloured HMI (new), Tools and foundation frame (new), Water Booster Pump for operating auto cleaning system (new), Pipe line fittings like Back pressure valve, Pressure switches, Pr Gauges, Sight Glass, etc (new), Supply of finetuner (new), Commissioning Spares (new)

Condition: refurbished (used), Year of construction: 2021, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 02, overall weight: 2,200 kg, type of input current: AC, temperature: 90 °C, power: 22 kW (29.91 HP), rotational speed (min.): 6,400 rpm, rotational speed (max.): 6,400 rpm, space requirement height: 1,651 mm, space requirement length: 2,082 mm, input voltage: 220 V, space requirement width: 1,778 mm, control cabinet width: 1,016 mm, control cabinet length: 812 mm, control cabinet height: 2,336 mm, input frequency: 50 Hz, Equipment: documentation/manual, oil mist separator, rotational speed infinitely variable, GEA Westfalia Self-cleaning Separator Capacity: 300 TPD Model: RSE 120-01-777 Ncsdsw Rakcopfx Ahwsn Condition- Rebuilt Along with PLC Panel along with Danfoss Frequency drive and Fully touch type coloured HMI (new), Tools and foundation frame (new), Water Booster Pump for operating auto cleaning system (new), Pipe line fittings like Back pressure valve, Pressure switches, Pr Gauges, Sight Glass, etc (new), Supply of finetuner (new), Commissioning Spares (new)

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1670 242, Equipment: CE marking, documentation/manual, Fully functional Westfalia separator, all documents, tooling and cover hoist crane included. Last operational 12.2024. Nodpfxjw Icgbo Ahwscn

Condition: ready for operation (used), Year of construction: 2018, FESSMANN ECO Line smoking chambers of the high-performance T3000 624 2W model. Manufactured in 2018 by FESSMANN GmbH & Co. KG, two of these chambers are equipped with an integrated cooling function, making them ideal for hot smoking, cooking, cooling, and thermal processing. These chambers belong to the ECO Line, designed with energy efficiency, reduced emissions, and optimal product quality in mind. Ideal for modern meat processors who want to reduce operating costs without sacrificing performance. Nodpfsw Ew Hrex Ahwocn Technical data: Manufacturer: FESSMANN GmbH und Co. KG Model: T3000 624 2W ECO Line Year of manufacture: 2018 Available units: 4 (2 with cooling option) Voltage: 230/400 V, 50 Hz Control voltage: 230 V / 24 V Motor power: 6.0 kW Heating power (HD + EL): 125 kW Cooking power (ND 0.5 bar): 74 kW Application: hot smoking, cooking, cooling, pasteurization Key advantages: Part of the ECO series by FESSMANN – designed with energy savings and environmental protection in mind 2 chambers with built-in cooling function Precision and durability of German engineering Versatile use in the production of sausages, hams and cold cuts Fast and even processing of products Available immediately with complete technical documentation Manufacturer FESSMANN GmbH und Co. KG Model T3000 624 2W ECO Line Year of manufacture 2018 Available units 4 (2 z opcją chłodzenia) Voltage 230/400 V, 50 Hz Control voltage 230 V / 24 V Motor power 6,0 kW Heating power (HD + EL) 125 kW Cooking power (ND 0.5 bar) 74 kW Application hot smoking, cooking, cooling, pasteurization

Condition: good (used), The Pieralisi Decanter is a high capacity horizontal centrifuge designed for industrial applications requiring efficient solid-liquid separation. The decanter is used for the separation of two or more specific phases of different densities, especially for the clarification of liquids in which suspended solids are present. The separation of solids and liquids takes place inside a cylindrical-conical rotating drum, where the heavier solid phase is collected on the periphery and continuously removed by an internal conveyor. Its key technical specifications are detailed below: Technical specifications: - Drum diameter: 470 mm - Maximum drum speed: 3,350 rpm - Drum ratio: 5.28 l/d - Typical applications: wastewater treatment, sludge separation, processes in the food and chemical industry. Nsdowxwz Aepfx Ahwocn

Condition: used, functionality: fully functional, An industrial decanter is a type of centrifuge used to separate solids and liquids in industrial processes, such as wastewater treatment, olive oil production, brewing, starch extraction, etc. GEA two-phase decanter separators have been specially designed for olive oil extraction. The drum has a cylindrical part that allows an efficient separation and clarification of liquids. The centrifugal force projects the solid particles against the drum wall, which is transported by the auger to the solids outlet. The separated and clarified oil phase discharges by gravity through the liquid outlet regulated by diaphragms of the decanter, while the solid phase leaves the decanter through the solids outlet. Njdpfewny N Iox Ahwocn Solids: 1.8 kg/dm3.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Tetra Alfast Direct Inline standardization system, designed for inline standardization of milk and cream. Ncjdpfx Ahewf Iq Ujwen Capacity 25000 l/h. YOM: 2014 Equipped with 2 density meters, 4 electro-magnetic flow meters and 3 flow control valves for measuring and controlling fat content in milk and cream.

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Ncjdpfx Ahewayr Tewon Min./max. feed temperature: 5/100 °C Max. throughput: 30 m³/h

Condition: ready for operation (used), A GEA clarifier (skimmer) is available. Bowl speed: 5920 rpm, material density: 1.1 kg/dm³, production capacity: approx. 10000 l/h, motor power: approx. 18 kW, construction material: stainless steel 316, documentation available. On-site inspection is possible. Nsdpfsu S I D Djx Ahwocn

Condition: refurbished (used), Year of construction: 1973, functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Test books, tools, drawings available! Nodpfxjtqf Dbs Ahwocn

Condition: excellent (used), Year of construction: 2019, Provisur’s AM2C STS 2000 (soft tissue separator) boasts a durable design crafted from premium materials, ensuring dependable performance. This technology efficiently removes bone fragments, sinew, and cartilage from meat and fish while preserving the fiber structure. It’s also versatile, suitable for dairy depacking and extracting creams from vegetables like avocados and garlic. As products enter the separator, a flexible pressing belt and an adjustable perforated drum mechanically separate the soft components from hard contaminants, which are then discarded through a waste chute. In set with trolley for tools and drums. Equipped with a hopper screw feeding system. Technical data: Power: 12kW Nodpfx Ahstixrlswscn Efficiency: 1.000-2.300 kg/h Manual/automatic operation Weight: 1800kg

Condition: excellent (used), Year of construction: 1980, Westfalia Separator SA 40, used in beverage industry, in excellent condition. Ncsdpfx Aoq U Dbpohwsn