Exportverpackung Sehnde GmbH

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, TECHNICAL DETAILS Number of upper units: 4 With NC positioning: yes Lateral horizontal units: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control system: BECKHOFF CONTROL Total installed power: 75 kW Lodpfezf Ibwjx Am Tshh EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8649

Condition: excellent (used), Catalogue number: 7859 ADVANTAGES – 8 spindles – with oscillation – variable spindle spacing (adjustable) Lhodpfxozdz Hqe Am Tjh – 2 work tables – unpainted – used drilling machine, in very good condition TECHNICAL DATA Drilling spindles: 2x4 pcs Oscillation range left/right: 40mm per side Oscillation speed adjustment on inverter Spindle head adjustment: up/down Each pair of spindles (2 pcs) adjustable: left/right 2 rotation speed options + left/right Max tool diameter: 15mm Table adjustment: up/down Table dimensions: 700x200mm 4 hydraulic cylinders Motor power: 2x 2kW Oscillation motor: 0.75kW Dimensions (L/W/H): 1800x1350x1300mm Weight: 862kg Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, 4-group tilting drilling machine Lodpfszcpy Dox Am Tohh

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition Lodpfjzabaksx Am Tjhh – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, The mortising machine is used to create the counterpart for the tenon. Ledpfx Amey Tmrte Tehh

Condition: excellent (used), very good condition. video available. Lsdpfxoxyxh De Am Tehh

Condition: excellent (used), Holzma B14/4 drilling machine in excellent condition. Ready for operation. Video of the machine in operation available. Ljdpfjxyxgtjx Am Tehh

Condition: excellent (used), 2.4 kW motor Stepless speed adjustment Electronic displays for height and speed Lhjdpfx Amjxq Ri Uj Tsh

Condition: excellent (used), Drilling units with Festo control, currently mounted on a frame press. 4 drilling units 1.5 kW. 2 drilling units 1.5 kW with 240 mm stroke. 2 units with angle gears configured as sawing units. 2 drilling units with 3-spindle drilling head, 32 mm pitch. Individual sale possible. Lodpfx Asw I R Iasm Tshh

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, workpiece weight (max.): 50 kg, workpiece height (max.): 900 mm, workpiece length (max.): 2,600 mm, drilling depth: 25 mm, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Workpiece dimensions Length min: 200 mm Length max: 2,600 mm Height min: 35 mm Height max: 900 mm Thickness min: 8 mm Thickness max: 60 mm Maximum panel weight: 50 kg Length with extension: max. 3,200 mm Drilling Head Unit BH17 Vertical chucks: 10 Horizontal double chucks: 3 Circular saw blade diameter: 120 mm Max. working depth: 25 mm Saw blade thickness: 4 mm Rotation: clockwise Electrospindle Power at speed 12,000 – 15,000 rpm (S1): 5.5 kW Speed range: 1,000 – 24,000 rpm Lsdpfx Ajw Hqrkem Tjhh Rotation: clockwise EQUIPMENT BSolid Software – 3D CAD-CAM design program (Simulation and management of processes for machining and drilling centers; option to select additional modules for extended functionality according to production needs) Note: Dismantling and loading can be offered by a Biesse service partner for €2,000.

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Lsdpfowt Abwox Am Tohh Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), Drilling depth 9 cm Pneumatic press Pneumatic feed Motor 1.7/2.3 kW Height adjustment 14 cm 45-degree angle Table length 60 cm Lodewndwpopfx Am Tohh Width 72 cm Reach 60 cm (right-left) Front-back 20 cm

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - This offer is for an equipment package. Lhedpfju R Tftex Am Tjh The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: used, Manual Socket Inserter Lhedpeuxt Ahjfx Am Tsh

Condition: excellent (used), 1.1 kW motor Lhedpfx Aeumk H Sjm Tsh Table with corners Drilling depth 12 cm Maximum material height 110 cm

Condition: excellent (used), Year of construction: 2010, I sell the automatic drilling machine KUSING. Working width up to 1200mm Lhedpfx Aot I U E Iem Tjh Magazine for elements Configuration: 1+1 motors from sides Atypic 2-spindle drilling heads included 2 x 32mm. Drilling heads in price. Very good condition. Available immediately.

Condition: good (used), The machine consists of two units and offers the following functions: 1. Drilling dowel holes 2. Dowel milling 3. Glue injection 4. Dowel insertion Completely cleaned glue system; Positioning laser; We can send you a video demonstrating the machine in operation. Lhsdpfotpqafsx Am Tjh Process time is only approx. 3 sec/cycle You can call or write to us. We speak and write in German and Russian. You may also send messages in English. 5.3.4

Condition: excellent (used), Table length 200 cm Table width 130 cm 1 motor 1,8 kW Lhjdpfxspq Sauo Am Teh 2 motors 1,8 kW 7 spindles per 1 motor Maximum distance between spindles 124 cm

Condition: excellent (used), Drilling machine WMW s10 In very good condition. Lodpfx Aepbccajm Tjhh

Condition: used, Number of boring spindles 1 St. Motor output 1,1 kW Workpiece thickness ca. 100 mm Working width 650 mm Foot-operated drill machine Scheer type BM340 Lhjdpolfcnwjfx Am Toh

Year of construction: 1986, condition: excellent (used), 220V Ledpfx Amekhbl Is Tjhh 0.5 kW motor Range: 6 cm

Condition: used, Bacci brand manual mortiser with 1 tip Lhsdpfx Aoiv Damjm Teh

Year of construction: 1999, condition: used, functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Feed-through line – yes Lsdpfx Ameiffpxo Tshh Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Working depth700 mm Passage height max 40 mm Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Drilling spindles per support – 2 CE marking – yes Weight 1.600 kg

Condition: excellent (used), 0.37 kW motor Lhodpfsh Im Ukox Am Teh with a stroke of 7.5 cm In very good condition.

Year of construction: 2001, condition: excellent (used), I sell the Biesse line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Lhjdpfx Aed Iv H Rem Toh Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.