Rauscher & Reyhing GmbH

Condition: not inspected (used), Year of construction: 1995, functionality: limited functionality, HEBROCK Edge banding machine Euro 2000 Year of manufacture: 1995 Lajdpfxjzv Eh No Alcof Without jointing unit With undercarriage BRANDT Edge rounding machine FB 10 Year of manufacture: 1996 Both machines for €1,500.00

Condition: used, functionality: fully functional, Holzher edge banding machine for 0.5 - 8 mm edge banding Year of manufacture: 1995 Lasdpfjzv Ehpsx Alcef Type 1436 SE With glue reservoir Without pre-milling Cut-off knife Flush trimming Radius milling Radius pull blade Smoothing unit Dimensions 420 x 100 x 160 cm

Condition: good (used), Year of construction: 2018, machine/vehicle number: 11000-0072, functionality: fully functional, input voltage: 400 V, input current: 57 A, input frequency: 50 Hz, type of input current: three-phase, For sale: a professional, single-sided industrial edge banding machine from the renowned German manufacturer IMA Schelling, model Novimat Compact I G80 / 700 R3. The machine was purchased new in 2018 and has been in operation in the same facility since then. The unit is in continuous use, regularly serviced, well-maintained, and in 100% technically sound condition. Key information and technical condition: Year of manufacture: 2018 Power: 26kW Power supply: 400V (3 phases), 50Hz Compatible with polyurethane (PUR) adhesive Usage history: operated in a single-shift mode, only 8 hours per day Condition: good, ready for immediate use. Laodpfx Alozvyh Recef

Condition: used, machine/vehicle number: 008665, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR, Cartridges Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Lasdpfezvwn Usx Alcjf Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Manufacturer: Hebrock Type: EURO 2000 Year of manufacture: 2001 Lsdpfx Ajzvvtcolcjaf Radius and chamfer pneumatically adjustable. Power: 7 kW Workpiece thickness: approx. 10 – 50 mm Edge thickness: approx. 0.5 – 3 mm Minimum workpiece length: approx. 250 mm Minimum workpiece width: approx. 70 mm In very good condition.

Condition: used, Year of construction: 2021, machine/vehicle number: K3999, functionality: fully functional, operating hours: 5,384 h, power: 14.6 kW (19.85 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 10 m/min, total height: 1,430 mm, total length: 5,250 mm, total width: 1,230 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Hebrock K36 AIRTRONIC edge banding machine – zero joint, 2021, low mileage We are selling a single-sided edge banding machine from Maschinenbau Hebrock GmbH (Hüllhorst, Germany), model K 36 with AIRTRONIC system, machine number K3999, year of manufacture 2021. The machine is currently in operation at our facility – fully functional and ready for immediate use. Zero joint – this is what sets this machine apart. The edge banding machine is equipped with an Airtronic hot air unit. Compressed air heated to 300–600 °C is directed through a nozzle directly onto the functional layer of the edge band, just before the pressing zone – the edge band fuses with the panel without a visible glue line. In practice, this means the ability to edge band acrylic, high-gloss, and lacquered fronts with quality comparable to laser technology, without investing hundreds of thousands of zlotys in a laser machine. This is the most expensive and rarest option in this class of edge banding machines – on the used market, there are literally only a few machines with a zero joint available across Europe. The machine can also operate in a conventional mode, using standard EVA and PUR hot melt adhesive. Mileage – documented by the machine’s counters: Laodpfx Ajzvu Ekolcef Operating hours: 5,384 mth Length of edge band applied: 619,339 m (619 km) Parameter Value Type K 36 Machine number K3999 Year of manufacture 2021 Voltage / frequency 400 V / 50 Hz Rated current 28.9 A Total power 14.6 kW Operating hours 5,384 mth Edge length 619,339 m Machine name Single-sided edge banding machine with Airtronic zero joint Machine number K3999 Functionality Fully functional Operating hours 5384 Live demonstration possible Weight / dimensions 1700 kg · 5250 × 1230 × 1430 mm Input current 28.9 A (rounded to 29) Workpiece height 60 mm X-axis feed 10 m/min Edge thickness 3 mm PRICE 250,000 NET

Condition: good (used), Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Lajdpfxozvq Eyj Alcef Weight 850 kg

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013. Type: TORNADO-TOP Year of manufacture: 2013 Lsdezvqclepfx Alcoaf Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Conductor cross-section: 5×6 mm² If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters for straight edges for angled edges particularly suitable for edge banding of shaped parts Lajdpfx Aszvmygjlcsf READY FOR OPERATION

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW Lsdpfxozvmx Ae Alceaf - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (incl. DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir preparation, incl. adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius cutting blade; flush cutting blade (incl. pneumatic extraction); cleaning station; 1 free space for a 2nd milling station or a slot cutting saw (slot cutting saw only if the cleaning station is removed); robust chain drive, ball-bearing mounted double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Ledpfxezvhk Ho Alceaf Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change fitting for corner milling cutter K36, 1 unit, extra charge for multi-radius cutting blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spray device, plate K36, 1 unit, cleaning agent spray device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius cutting blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the support in the infeed and outfeed by 440 mm each; 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support surface for improved workpiece handling by 450 mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Packaging surcharge, 1 unit Additional quick-change reservoir incl. level sensor Manufacturer: Hebrock Type: 36/14/1 Article No. H36/14/1, 1.0 unit Additional change motor for corner milling cutter K36 Manufacturer: Hebrock Type: 36/08/2 Article No. H36/08/2, 1.0 unit R1 Location: Supplier

Condition: used, Year of construction: 2009, Bi-Matic Dynamic 4.5.S.7 (year of manufacture 2009): Dimensions of processed material: Edge thickness: 0.4 – 3.0 mm (in coils), up to 5 mm (in strips). Part thickness (panels): 8 – 50 mm. Minimum part width: 60 mm. Minimum part length: 90 mm. Operating parameters: Working feed speed: 7 m/min (constant speed of the feed belt). Working air pressure: 6 bar. Adhesive heating time: approx. 5–6 minutes (Teflon bath). Lsdpfx Alezvfdwocoaf Automatic edge banding machine, application zone, pressing zone, single-motor edging on THK guides, tilting milling unit, radius cutter, brushes. The machine is still in operation. Available for immediate pickup.

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Lodszvb Uxspfx Alcsaf Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: new, Year of construction: 2022, Exhibition machine Panel thickness: 8 - 50 mm Edge thickness: 0.3 - 3 mm Solid edges up to 5 mm 7" touchscreen Release agent spraying at the infeed Pre-milling with two diamond milling heads Infrared preheating lamp Top-mounted, interchangeable gluing unit (including a second glue reservoir) Lsdpfx Alezvapuecoaf Cross-cut saw unit Flush trimming unit R1 Corner rounding unit Nesting scanning rollers Profile trimming unit Glue trimming unit Spraying unit for finishing Smoothing unit New machine, available after exhibition

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Lasdpfx Alszu T Sgjcsf Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2026, 0,4-8 mm Workingpiece thickness from to 8-60 mm Total length 4930 mm Feed speed 10 m/min. Laodpfx Alezu A R Socof Weight 1500 kg

Condition: excellent (used), BRANDT KDF 440, 1440 edger well-equipped, CNC-controlled units operated from the control panel Pre-milling cutters Plate heating Glue application with a roller Second tank included Pneumatic pre-trimming guillotine Pressure rollers Trimming balls for final cut Ledpszuztfjfx Alceaf Liquids Multi-milling unit (up/down) R1-R2 Corner rounding unit R1-R2 Multi-profile edging unit R1-R2 Straight edging unit Liquids Polishing unit Nesting package Max. element height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 11 m/min Very good condition for a used machine Original mileage 144,000 meters

Condition: used, Year of construction: 2010, Edge banding machine Manufacturer: Brandt Type: Optimat KTD 720 Year of manufacture: 2010 Lodpfezuzlbex Alcjaf Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment Lajdpfx Aozuyp Selcef - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Lodpszuyp Eofx Alcoaf Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2009, - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm Single-sided edge banding machine Manufacturer: IMA Type: Novimat Contour/I/G80/790/L20 Year of manufacture: 2009 Technical data - Electronically controlled feed speed: 6-30 m/min - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm Lsdpfx Ajzuyprelcoaf - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm - Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm Workpiece size: - Minimum workpiece length in the feed direction: 150 mm - Minimum workpiece width: 25 mm, thickness: 65 mm - Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades - Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying) - Smallest element: 150 mm x 150 mm or 65 mm x 300 mm Note: *65 mm with a maximum piece thickness of 25 mm The edge banding machine is equipped with: - Hand-adjustable guide rail for inserting workpieces - Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz - Heating unit for warming the workpieces - Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm, with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm - Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container. - Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h - Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function - Pre-milling unit 08.055, swiveling up to max. 30° - Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min - Cleaning agent dispenser - Profile trimming blades 08.519 - Surface trimming blade 08.521 for removing excess glue from glue joints - Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm - Groove/milling unit with one motor Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): Lasdozuyplspfx Alcsf - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming Lsdpfxjzuyk Ns Alcoaf - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2023, Edge banding machine Manufacturer: Biesse Type: Akron 1440 A Year of manufacture: 2023 Technical data - Panel height*: 10-60 mm - Edge height: 14-64 mm - Edge thickness from roll: 0.4-3 mm - Edge thickness in strip form: 0.4-12 mm - Panel overhang over the chain: 25 mm - Panel length: 140-3200 mm - Minimum panel width (at a length of 140 mm): 85 mm - Minimum panel width (at a length of 250 mm): 50 mm - Chain feed speed: 12 m/min - Distance between panels: 450-650 mm - NC axis package for automatic machine setup - Mounting kit for workpiece return * Minimum panel height: 8 mm at a maximum edge thickness of 1.5 mm. Depending on the selected processing units. Maximum permissible feed speed: 12 m/min. Units Anti-stick spray unit ADZ02 Pre-milling unit RT02 - two high-frequency motors, each 1.8 kW, 12000 RPM Gluing unit VC-511 - Processing of EVA and PUR granular adhesive - Filling volume: 1.5 kg Pressure zone - 1 driven pressure roller 100 mm, with independently adjustable pressing pressure - 2 and 3 pressure rollers, not driven, 60 mm, with anti-stick coating, arranged conically in relation to each other and pneumatically adjustable Trimming unit IT-70-S - two high-frequency motors, each 0.8 kW, 12000 RPM - The trimming can be performed straight (0°) or at an angle in a range of 0 to 15°. - Anti-static/coolant spray device after the trimming unit Flush trimming unit RF02 - two high-frequency motors, each 0.65 kW, 12000 RPM Laodpfozuyk Asx Alcjf Corner rounding unit - two high-frequency motors, each 0.65 kW, 12000 RPM - Corner rounding is possible for both workpieces with a straight edge profile and for postforming and softforming profiles at 90° and 180° corners. Edge scraping blade RB02 - Switching between two processing profiles is done manually. Glue line scraping blade RC02 Polishing unit SZ02 - two motors, each 0.37 kW, 2800 RPM Hot air blower PH-501 - Power: 2 kW - Infinitely adjustable temperature control Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge Ljdpfx Aljzuykvscjaf 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order