GambTec Toni Gambino

Condition: ready for operation (used), Year of construction: 1966, Immediately available from location: L & Z Lathe Weiler Year of manufacture approx. 1966 Centre height 140 mm Swing diameter 280 mm Over carriage 180 mm Turning length 800 mm Spindle bore 24 mm Spindle speeds up to 1600 rpm Drive power 2 kW Bjdsxufckspfx Abcslp Chuck diameter 140 mm Multifix tool holder with inserts Weight 1 ton Priced at EUR 1,500.— plus VAT ex location

Condition: good (used), – Distance between centres 750 mm – Swing over bed 310 mm – Swing over cross slide 440 mm – Swing over support 175 mm – Spindle bore 32 mm – 65/2200 rpm – Infinitely variable speed – Longitudinal and cross feed – Digital display – Brake – Coolant system – Multifix with 3 tool holders – Lighting – Safety guard – Fixed steady rest – Travelling steady rest Bsdjxtf Siopfx Abcslp – Three-jaw chuck – Emergency stop button – Documentation – 400V

Condition: reconditioned (used), functionality: fully functional, WEILER PRAKTIKANT 160 – partially overhauled AVAILABLE IMMEDIATELY FROM STOCK - Machine in very good condition / slides and guides flawless / runs extremely smoothly - 3-axis digital readout "NEW" - Center height: 160mm - Distance between centers: 650mm - Swing over bed: 320mm - Swing over cross slide: 198mm - Bar capacity: 40mm - Spindle speed range: 95–2500 rpm - Automatic longitudinal/cross feeds - Thread cutting: metric / inch / DP / module - Tailstock: MT 3 - 3-jaw chuck 160mm "NEW" - Electric chuck guard "NEW" - Work light "NEW" - Multifix quick-change tool post with three holders "NEW" - Chip guard at the rear "NEW" Blodpextbc Dofx Abcep - 2x emergency stop - Bed stop - Operating tools - Documentation Dimensions: LxWxH: 1.7 x 1 x 1.6 meters / Weight: 700kg Subject to errors and input mistakes.

Condition: good (used), – Distance between centers: 1000 mm – Swing diameter over bed: 310 mm – Swing diameter over cross slide: 440 mm – Swing diameter over support: 175 mm – Spindle bore: 32 mm – 65–2200 rpm Bodpfx Aexr Rn Hjbcelp – Infinitely variable speed – Longitudinal and cross feed – Digital readout (DRO) – Brake – Coolant system – Multifix with 3 tool holders – Lighting – Safety guard – Fixed steady rest – Traveling steady rest – Three-jaw chuck – Emergency stop switch – Documentation – 400V

Condition: used, Year of construction: 1966, turning diameter over bed 330 mm turning dia. in gap 400 mm Bljdpjxrg Atjfx Abcop turning length 600 mm centre distance 750 mm spindle turning speed range 20 - 1000 U/min spindle bore 25 mm 3-jaw chuck Röhm, Ø 200 mm dimensions of the machine ca. 2000 x 800 x 1500 mm weight of the machine ca. 1200 kg Fixed bezel Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light

Condition: used, functionality: fully functional, Centre height: 160 mm. Bledpfx Abjxrbv Ujcop Swing over cross slide: 190 mm. Distance between centers: 1000 mm. Spindlebore: 36 mm. RPM.: 20-3200. Width of bed: 250 mm. Tail stock taper: 4 Motor: 3 kW. Country of origin: Chech Republic. Size (L x W x H): 2100 x 950 x 1400 mm. Weight: 1300 kg. Med Berglock quick tool changer. All our machines are tested and serviced before delivery.

Condition: used, This Weiler Condor lathe is being auctioned online in our industrial/machinery insolvency auction – SK Hydroautomation GmbH – CNC machines – workshop equipment – material. Bodpfx Abjxqyp Djcjlp

Condition: used, turning diameter 210 mm turning length 1000 mm swing diameter over bed slide 435 mm centre height 210 mm greates pass round over bed 435 mm spindle head DIN 55027 / DIN ISO 702-3 spindle bore 52 mm turning speeds 44 - 2.000 U/min transmission ratio 12 feed per revolution 0,036 - 2 U/mm diameter of quill 65 mm quill stroke 120 mm taper bore DIN 228 MK4 total power requirement 5,5 kW Bledpfx Abjxqrdyecjp -Lead screw and feed screw cover -Brake for main spindle -Toolmaker precision according to DIN 8605 -High drive power and high torque on the main spindle -Large thread cutting range -Convenient operation -Digital position display (HEIDENHAIN ND 7013) 3-axis display for bed, cross slide, and top slide Tool memory for 16 tools Tool memory with one reference point per axis Sum button for Z and Zo Inch/metric switchable Plane path X as radius or diameter display Display resolution up to 1 µ Taper calculator -LED machine light -Coolant device

Condition: refurbished (used), Year of construction: 1981, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 420 mm, center height: 210 mm, turning length: 1,000 mm, total length: 2,300 mm, total width: 1,300 mm, total height: 1,700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 33 rpm, quill mount: MK 4, Heidenhain ND 780 position display Bljdpjxqpwkefx Abcep Röhm 3-jaw chuck, diameter 250 mm Multifix quick-change tool holder Coolant system Chuck guard Chip backsplash CE compliant Year of manufacture: 1981

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Bodpfxoxp Hude Abcjlp

Condition: used, Year of construction: 2007, Parallel Lathe PROMAC type 948 Year of construction: 2007 Between points: 800 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 180 mm Maxi diameter in brocken bed: Ø 400 mm on 100 mm Spindle diameter: Ø 36 mm Spindle speed: from 90 to 1800 RPM Rapid Turret GOODSHAPE 3-jaws chuck LADNER Ø 160 mm Motor: 1,5 kW Threadings: Metric + Whitworth Steadies: One 3-points steady + one follow steady Tailstock: CM3 Supplied with one plate Ø 250 mm + one independant 4-jaws chuck Ø 200 mm+ + some jaws Lubricant pump Voltage: 380 V Length: 1700 mm Depth: 700 mm Total height: 1600 mm Weight: approx 800 KG PROMAC type 948 Year of construction: 2007 Between points: 800 mm Blodsxpug Uepfx Abcjp Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 180 mm Maxi diameter in brocken bed: Ø 400 mm on 100 mm Spindle diameter: Ø 36 mm Spindle speed: from 90 to 1800 RPM Rapid Turret GOODSHAPE 3-jaws chuck LADNER Ø 160 mm Motor: 1,5 kW Threadings: Metric + Whitworth Steadies: One 3-points steady + one follow steady Tailstock: CM3 Supplied with one plate Ø 250 mm + one independant 4-jaws chuck Ø 200 mm+ + some jaws Lubricant pump Voltage: 380 V Length: 1700 mm Depth: 700 mm Total height: 1600 mm Weight: approx 800 KG

Condition: used, Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 175 mm Bledpfx Aboxpugujcsp Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Bledpfxexpuf Re Abcop Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck Bsdpjxn Sf Ssfx Abcolp 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/0001/09472, MACHINE SPECIFICATION Distance between centres 635mm Centre height 165mm Swing Swing over bed 335mm Swing over cross slide 209mm Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Total travel of cross slide 209mm Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor 2.25kW MACHINE SPECIFICATION Cont’d Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.040 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Bsdpfx Asxn Iv Tebcjlp Tailstock Approx weight 800Kg Machine in Imperial execution MACHINE EQUIPPED WITH 3 jaw chuck Quick change toolpost and 6 off toolholders Ainjest high speed screwcutting attachment Single bedstop 5 Position turret bedstop Apron dial Chuck guard Coolant system Rear splashguard

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Conventional Lathe Bljdpsxmf Nnofx Abcsp WEILER Praktikant 140 B Year of manufacture: 1985 Working area: Centre height: 140 mm Centre distance: 650 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 190 mm Spindle: Spindle taper: DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm Main drive: Drive power: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speeds: 16 Feed range: Number: 24, Longitudinal feed: 0.02 – 0.63 mm/rev, Cross slide: 0.006 – 0.2 mm/rev. Length x Width x Height: 1600 mm × 800 mm × 1300 mm Weight: Approx. 650 kg

Condition: ready for operation (used), turning length 800 mm Blodpfx Aoxmaktsbcsp turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 2800 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, L+Z Lathe WEILER Praktikant 160 – Partially Overhauled The machine is in very good used condition – delivery upon request, delivery time by arrangement! ✅ Technical Data Year of manufacture: approx. 1990 Digital readout: 3-axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter over cross slide: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar capacity: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Thread cutting: metric, imperial, DP, module Tailstock: MT 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change tool post + 1 insert Electric chuck guard (NEW) Work lamp (NEW) Complete machine documentation Emergency stop Various chuck keys Coolant system L+Z spindle guard Machine mounts Optional: additional quick-change holders, drill chuck, live centre, collet attachment 386E + collet set 386E (NEW) Transport, installation & commissioning optional Bodpfjxl Eydox Abcjlp ✅ Condition Machine partially overhauled Very good used condition Delivery upon request – delivery time by arrangement (subject to prior sale)

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 22 [kW] - Spindle speeds : 3400 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 298 [mm] COUNTER-SPINDLE - Spindle nose : A2-5" - Spindle speeds : 6000 [rpm] - Rapid traverse rate : 10 [mm/min] TURRET 1 - Number of positions : 12 - X/Z stroke : 213/572 [mm] - Tool type : BMT65 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 30 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3630/2290 [mm] - Machine height : 2340 [mm] - Machine weight : 4536 [kg] Bsdpfxsxlk I To Abcjlp MACHINE HOURS - Number of hours under power : 622 [h] - Number of working hours : 137 [h] EQUIPMENT - CNC : HAAS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Coolant tank - Chips conveyor - Tool probe - Electric transformer - Number of fixed tool holders : 9 - Chuck 3 jaws : 2

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Chuck Guard Blsdpfxjxldido Abcep Lighting Coolant System Rear Splashguard

Condition: ready for operation (used), Weiler Commodor lathe with leadscrew and feed shaft for sale. Manufacturer: Weiler Type: Commodor Condition: used, good, still in production Scope of delivery: - Multifix B tool holder - Three-jaw chuck Bledpfxexladwe Abcsp

Condition: good (used), functionality: fully functional, Swing diameter 381 mm Bljdpoxk T Rusfx Abcep Turning length 1500 mm

Condition: good (used), Year of construction: 2015, turning length: 400 mm, 2015 Schinfa Rebuild EUR 18.500 Re-Grinded guideways New bearings / screws / engines New eletric / lubrication / protectors CE-Safety cobvers HeidenHain ND780 2 axis Dro  Steady rest / Documentation / Drawings Slant bed construction Levers and handles controlled from one place Precision H7 Turning jobs Collet device with collets  Multi fix tool holder system    DBC Turning Length: 400mm Swing over bed Ø: 315mm Swing over cross slide Ø:180mm Spindle bore: 37mm Spindle power: 3.2kW Stroke pinole: 100mm Spindle taper: 5Mk Bedpexgdb Nsfx Abcelp Speeds / ranges: 90-3550Rpm Quill Ø: 48mm Length: 1400mm Width: 700mm Height: 2100mm Weight: 1250kg

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Weiler Commodor 230 Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Excellent Original Condition CE !!! Technical Data: >> Year of manufacture: 1997 Machine no. 330 Bljdpfx Ajxfu Spebcep >> Centre height: 230 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55027, size 6 with bayonet lock >> Tailstock: Morse taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.35 to 12 mm >> Weight: approx. 2,000 kg >> Spindle brake engageable >> Drive power: 7.5 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1.0 m Accessories and Equipment: >> 3-axis digital readout from K&C, brand new, 12-month manufacturer's warranty with user manual Functions: mm/inch switch-over, coordinate selection ABS/INC, value halving, reference mark, 200-tool memory, taper calculation, radius/diameter, quick zeroing, counting direction toggle >> 3-jaw chuck NEW 200 mm, 2 sets of jaws >> Multifix size B with 3 tool holders >> Bed stop >> Fixed steady rest >> Machine lamp >> Coolant system About the machine: For sale is a Weiler Commodor 230 lathe in excellent original condition with CE conformity. The Commodor 230 is one of the largest manual lathes manufactured by Weiler—a very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected in our workshop. A full oil change has been carried out. This newer generation of Weiler lathes is particularly user-friendly. You are welcome to view and test the machine under power at our premises.

Condition: ready for operation (used), Colchester Triumph 2500 Lathe Swing over bed: 400 mm Swing over cross slide: 246 mm Distance between centres: 1270 mm Centre height: 195 mm Max. turning diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2,500 rpm Infinitely variable spindle speed ranges: Bljdpfx Aexfrgdjbcep - low: 14–300 rpm - medium: 36–830 rpm - high: 109–2,500 rpm Overall dimensions: 2,600 mm x 1,300 mm x 1,800 mm (L x W x H) Accessories: 5 Multifix tool holders Steady rest Live and dead centers Drill chuck Jaws Cabinet Coolant pump You are welcome to come and inspect the machine. We are happy to organize affordable shipping for you. You will receive a proper invoice. A net invoice can be issued for international customers with a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may be subject to deviations, and errors in the item description may occur and are reserved.