Tailored Test Solutions Ltd

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Nedjzhadcepfx Amuewh Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), H. Köhler HK 300 S Kesternich Corrosion Testing Unit Manufacturer: H. Köhler GmbH Type: HK 300 S Year of manufacture: unknown Machine type: Kesternich corrosion testing unit / SO₂ corrosion testing chamber Test chamber volume: approx. 300 l For sale is a used H. Köhler HK 300 S corrosion testing unit for performing Kesternich or SO₂ corrosion tests according to DIN 50017 / DIN EN ISO 6988. The unit is suitable for corrosion testing of metals, coatings, paints, and components in the laboratory, research, development, and quality assurance. Technical data Test chamber volume: approx. 300 l Temperature range: ambient temperature to approx. +55 °C Humidity operation: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption: approx. 3 Nm³/h Compressed air connection: 4.5 – 7.0 bar Demineralized water connection: 2.5 – 4.0 bar Spray pressure: 0.7 – 1.5 bar Dimensions (W × D × H): approx. 1,200 × 600 × 1,750 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test sequences Temperature control Equipment Stainless steel test chamber Large viewing window Gas metering device Ventilation system Temperature control Test chamber thermometer Manometer Compressed air connection Demineralized water connection Exhaust connection Operating manual available Nwodpfx Amezg U Tijueh Maintenance documents available EC declaration of conformity available Application areas Kesternich test SO₂ corrosion test Corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion testing unit Operating manual EC declaration of conformity Maintenance documents Documentation Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, CTS Type: TS-70/600-13 Water-cooled temperature test chamber Type series: TS-70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from 120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Electrical connection: 400/3P/N/PE Nedpfx Amjzg Tzfjuowh Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Nedezg Ty Uepfx Amuewh Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller Nwedpfx Aezg Ty Ijmueh - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50 Hz Rated power: 10 kW, Rated current: 21 A Sound pressure level at 1m distance (free-field measurement): < 69 dB (A) Side feed-through: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: approx. 570 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) Nsdpfx Aezg Tyzjmuswh (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Calibration machine accuracy (option) new LED ring light (option) automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Njdpszg Tyusfx Amuowh Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: excellent (used), Espec Type: EGN28-6CWL Espec, water-cooled Temperature test chamber, N series Power supply: AC 400 V, 3-phase, 50/60 Hz, 38 A Temperature range: -70 to +180 °C Temperature change rate: Heating: 10 °K/min Cooling: 5.5 °K/min Internal dimensions (W x H x D) in mm: 1000 x 1000 x 800 External dimensions (W x H x D) in mm: 1205 x 1920 x 2159 Usable volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg For your safety as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone. Nsdpfszg Tynex Amuswh

Condition: good (used), LDS Type: V824 + Tira Sliding Table + SPA30K Swing-arm exciter for medium forces Technical data: Sine force vector 26,689 kN (peak) Random force vector 25,355 kN (rms) Half-sine force vector 53,376 kN Mass of the moving element 21.55 kg Frequency range DC - 3200 Hz Sine acceleration max. 981 m/s² Random acceleration max. 50 gn rms Velocity max. 1.78 m/s Displacement ± 12.7 mm Sliding table: W x H x D: approx. 1650 mm x 925 mm x 2450 mm Working area: 991 mm x 991 mm Usable frequency range 0 to 2000 Hz Plate thickness: 50 mm Plate weight: 94 kg Max. load: 2200 kg Njdpfozg Tyhsx Amujwh Condition: used Weight: Shaker approx. 1725 kg Sliding table 3500 kg Scope of supply: (See images) Total weight approx. 5300 kg (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), LDS Type: V895-440 HBT900C with SPA50K amplifier Technical data: Actuator dimensions: 440 mm Sine force vector: 55.6 kN (peak) Random force vector: 55.6 kN (RMS) Half-sine force vector: 166.8 kN (peak) Frequency range: 0 to 2100 Hz Sine acceleration max.: 981 m/s² Random acceleration max.: 490 m/s² Velocity max.: 1.6 m/s Displacement: ± 63.5 mm Vibration exciter mass: 55 kg Max. load: 700 kg Amplifier dimensions: W x H x D mm: 537 mm x 1905 mm x 895 mm Weight: 622 kg Slip table: Working surface: 900 mm x 900 mm Plate thickness: 50 mm Plate weight: 80.4 kg Max. load: 7250 kg Usable frequency range: 5-2000 Hz Condition: used Nwedpfx Amjzg Tybouoh Total weight (table + shaker): approx. 7000 kg Shaker + table dimensions: L x H x W approx. 2700 x 1500 x 1800 mm Scope of supply: (See pictures) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Time-related temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Time-related temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-related humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Nedpfszg Tx Rjx Amuewh Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: used, LDS Type: V875 Shaker System V875-440 LPT600C with SPA40K amplifier Vibrating exciter for medium forces Technical data: Fixture dimensions: 440 mm Head expander 850 x 850 mm Sine force vector 35.6 kN (peak) Random force vector 35.6 kN (rms) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max. 600 kg Acceleration max. 1078.7 m/s² Velocity max. 1.8 m/s Displacement ± 25.4 mm Vibration tests: Sine Random Shock Amplifier SPA40 Slider table: W x H x D mm: 1400 mm x 1250 mm x 2200 mm Nsdjzg Tx Djpfx Amuewh Working area: 600 mm x 600 mm Plate thickness: 37 mm Plate weight: 27.4 Max. load: 500 kg Condition: used Weight: Shaker approx. 2200 kg Blower 181 kg Amplifier: 622 kg Slider table 4760 kg Scope of supply: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, LDS Type: V875 Shaker System V875-440 with SPA40K Amplifier Vibration exciter for medium forces Technical data: Head expander 850 x 850 mm Fixture dimensions: 440 mm Sinusoidal force vector 35.6 kN (peak) Random force vector 35.6 kN (RMS) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max. 600 kg Acceleration max. 1078.7 m/s² Velocity max. 1.8 m/s Condition: used Weight: Shaker approx. 2200 kg Blower 181 kg Amplifier: 622 kg Scope of supply: (See images) (Subject to changes and errors in the technical data!) Nwodpfx Amszg Txwsujh We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical specifications of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test space volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Nwedpfx Amszg Txqouoh For further questions, we are happy to assist you by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.H. Njdpezg Txksfx Amuowh Humidity tolerance: +/- 5.0% r.H. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control module: Mitronic STB1-8 Number of lamps: 8 Ballast unit: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used / second-hand Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Nedpfxozg Txdo Amuswh Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140°C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Nodpjzg Tw Tofx Amuswh Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Specifications subject to changes and errors!) For further questions, we would be happy to assist you by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Nwjdpfjzg Tw Hex Amuoh Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95 % rH Humidity tolerance: +/- 5.0 % rH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260mm x 3850mm x 2780mm Test chamber (W x D x H): approx. 2254mm x 2645mm x 2251mm Door opening (W x H): approx. 2251mm x 2254mm Condition: used Delivery contents: (see picture) (Subject to changes and errors in the technical data!) For further enquiries, please contact us by phone.

Condition: good (used), TIRA Type: Walk-in climate simulation chamber TTZ 4008 S(m) Technical data: Temperature range: -40 to +120 °C Njdpfx Aszg Twmomuowh Temperature tolerance: +/- 1.0 °C Temperature change rate: 1 K/min Humidity range: 10…approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 8 m³ External dimensions (W x D x H): approx. 2410 mm x 3920 mm x 2530 mm Test chamber (W x D x H): approx. 2002 mm x 2148 mm x 2005 mm Door opening (W x H): approx. 2002 mm x 2005 mm Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Nwodpfjzg Twgsx Amush Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Njdpfozg Twaox Amuowh 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 -55 to +140°C Shaker: Exciter: 4x LDS V721, air-cooled Amplifier: PA 1000L Controller: imv K2 MIMO (Multi Input Multi Output) Software: imv K2 Excitation types: Sine / Random / Shock / Real-time profiles Force vector per shaker: 2.9 kN (peak sine) / 1.9 kN (RMS random) / 4.6 kN (peak shock) Maximum payload: 100 kg per shaker Acceleration: max. 44 g RMS / 66 g peak Velocity: max. 0.7 m/s Displacement amplitude: max. 25.4 mm p-p (1 inch) Frequency range: 5...4000 Hz Mounting area for test specimens: 1000 x 1000 mm aluminum profile frame Special features: The four shakers can be operated synchronously or asynchronously with the MIMO controller. An aluminum profile frame enables a mounting area of 1x1 m² for large test specimens. Without the profile frame, it can be used as a mobile modal shaker for large test specimens, such as complete vehicles. The lightweight vibrating elements of the shakers enable excitation frequencies up to 4000 Hz. Weight: 2000 kg Njdpfxszg Tv Ns Amuewh Climate chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8.000/-50/120 / Monoblock, welded Dimensions (mm): Width Depth Height Test chamber: 2,000 2,000 2,000 (8 m³) External dimensions without base frame: 2,340 3,600 2,800 External dimensions with base frame: 2,340 3,600 3,800 External dimensions of unit: 1,200 2,400 2,200 Door: 2,000 2,000 2 test chamber windows in the door: 460 460 Weight: 4,500 kg Insulation: 140 mm PU, CFC-free, B1 according to DIN 4102 Outer cladding: Steel sheet 0.6 mm, painted according to RAK 7035 Temperature range: -55 °C to +140 °C Temperature stability: ± 0.5 K over time Climate range: +10 °C to +95 °C Humidity range: 10% to 95% RH Refrigerant R404A 29 kg Total weight: 6500 kg Condition: used Scope of supply: (See picture) Example pictures! Current pictures will follow! (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temperature Deviation (temporal): ±0.1 to ±0.5 K Temperature Deviation (spatial): ±0.5 to ±2.0 K Temperature Change Rate (cooling): 5.0 K/min Temperature Change Rate (heating): 6.5 K/min Nodpfszg Tp Nex Amuowh Heat Compensation at +20°C: 3000 W Heat Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test Chamber Volume: 335 liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Level at 1m Distance (Free-Field Measurement): < 69dB (A) Side Feedthrough: 5.5 cm / 12.5 cm Chamber is water-cooled. Refrigerant: R-404A and R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components. 2. New filling with legally compliant refrigerant. 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of Delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Nwodpfx Aszg Tp Aemush Temperature Range: -70°C to +180°C Temperature Deviation (Temporal): ± 0.1 to ± 0.5 K Temperature Deviation (Spatial): ± 0.5 to ± 2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Heat Compensation at +20°C: 3000 W Heat Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test Chamber Volume: 335 Liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Pressure Level at 1m Distance (Free-Field Measurement): < 69dB (A) Side Opening: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: Approximately 570 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers will be subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of Supply: (See Image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Nwodpfx Aezg Tpvomush Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosive limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm External dimensions: Overall width 796 mm, Height 1725 mm, Depth 850 mm Load capacity / Payload Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air volume flow: 96 m3/h Purge time (5 air changes): 90 sec. Recirculation volume flow (enhanced): 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature Temperature limiter (TL) fixed at 300 °C Temperature selector limiter (TSL) adjustable above the rated temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Temperature selector limiter (TSL): 2 Rated temperature: 200 °C Electrical data Rated voltage / Frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.