Otto Wolf

Year of construction: 2000, condition: ready for operation (used), Offered is a CNC lathe Traub. Number of spindles: 2, spindle height above floor: 1130mm, max. turning diameter: 36mm, max. bar diameter: 36mm, max. turning length: 100mm, max. main spindle speed: 6300rpm, max. counter spindle speed: 6300rpm, main spindle power: approx. 10.7kW, counter spindle power: approx. 10.7kW, drive power range: main spindle travel X/Z: 370mm/250mm, counter spindle travel X/Z: 370mm/250mm, tool turret: 12, turret travel X/Z: 50mm/100mm, Y-axis turret: +/-20mm, max. speed of driven tools: 6000rpm, front tool positions: 5, rear tool positions: 5, control: Traub TX 8i. Weight: approx. 4000kg, machine dimensions: X/Y/Z: approx. 3400mm/1300mm/1700mm. Documentation available. Inspection possible by arrangement. Rjdpfx Acjzidirezsw

Year of construction: 2007, condition: ready for operation (used), A CNC short-bed turning machine Emco is available. Travel X/Z: 100mm/300mm, max. turning diameter: 85mm, max. swing diameter: 250mm, max. turning length: 255mm, center distance: 405mm, max. bar capacity: 25.5mm, spindle bore: 30mm, spindle speed: 6300rpm, tool stations: 12, tool interface: VDI16, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/1850mm, weight: approx. 1400kg, control: Siemens Sinumerik 810D, operating hours: approx. 27000h, spindle hours: approx. 11000h. Including bar feeder. The spindle was replaced in 2021 at approx. 25000 operating hours. Documentation available. An on-site inspection is possible. Redpfxozhnt Sj Aczew

Year of construction: 2005, condition: ready for operation (used), A Gildemeister CNC lathe is available. Tool stations: 8, max. turning diameter: 350mm, max. swing diameter over bed/cross slide: 400mm/270mm, max. turning length: 650mm, travel X/Z: 220mm/700mm, rapid traverse: 15m/min, chuck diameter: 200mm. Machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 2800kg, control: Fanuc 10i, automatic operating hours: approx. 462h. Documentation available. An on-site inspection is possible. Rodpfx Acszhntfszew

Year of construction: 2002, condition: ready for operation (used), A relatively lightly used Traub CNC universal lathe is available. Spindle bore: 82mm, max. chuck diameter: 315mm, turning length: 750mm, X/Z travel: 360mm/750mm, Z-axis travel: +/-60mm, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 3250mm/1900mm/2300mm, weight: approx. 7800kg, operating hours: approx. 21812h. Documentation available. An on-site inspection is possible. The image is for reference only. Rjdpfx Aezhnrnjczew

Year of construction: 2013, operating hours: 9,073 h, condition: used, machine/vehicle number: L8H-11203053DFBH, Travel ranges (X/Z): 203/550 mm, max. turning diameter: 256 mm, 12-station turret with driven tools, max. speed: 4,000 rpm, tool holder, WinMax control system, chip conveyor, coolant unit. Rodpezha E Hefx Aczow

Year of construction: 2013, operating hours: 25,877 h, condition: used, machine/vehicle number: 01620008481, Tool holder: VDI 30, weight: 3,265 kg, control system: SIEMENS, 1 chip conveyor, 1 set of VDI 30 tool holders, approx. 50 pieces, approx. 8 powered tools, on a transport trolley. Redpszha Alofx Aczjw

Condition: used, Year of construction: 1989, functionality: fully functional, workpiece weight (max.): 13,000 kg, TORNIO PARALLELO usato da 500x5000mm, TIANSHUI SPARK mod. CW61100E, anno '89. Rjdpfxszg Tz So Aczow

Condition: used, Year of construction: 1987, machine/vehicle number: 7826, This WEILER lathe, model Matador VS 2, will be auctioned off online as part of our industrial auction / machinery auction for inventory clearance at Siemens Ruhstorf – including measuring technology, electrical engineering equipment, office furniture, and office supplies, among other items. Redozg S Hyspfx Aczow You can find this and many other items on our platform.

Year of construction: 2020, condition: ready for operation (used), A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2450mm/2750mm, travel Z1/Z2: 2700mm/2300mm, max. workpiece diameter: 2800mm, max. swing diameter in the working area: 3000mm, min. workpiece diameter for 4-axis external machining/internal machining: 1250mm/1500mm, min. workpiece diameter for 2-axis internal machining: 450mm, rotary table speed: 230rpm, feed rate X: 32m/min, feed rate Z: 20m/min, B-axis speed: 150rpm, spindle power: 33kW, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg. Machine dimensions X/Y/Z: approx. 9350mm/8600mm/5700mm, control system: Siemens SINUMERIK 840D sl. Documentation available. An on-site inspection is possible. Rsdozgwyxepfx Aczsw

Year of construction: 2020, condition: ready for operation (used), A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2950mm/2650mm, travel X: 5600mm, travel Z1/Z2: 3200mm/2830mm, feed rate X: 32m/min, feed rate Z: 20m/min, max. workpiece diameter: 3800mm, max. swing in working area: 4000mm, min. workpiece diameter 4-axis internal machining/external machining: 1250mm/1500mm, min. workpiece diameter 2-axis internal machining: 450mm. Table speed: 100rpm, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg, spindle power: 240kW/202kW. Machine dimensions X/Y/Z: approx. 15600mm/10350mm/5750mm, control: Siemens Sinumerik 840D sl. Documentation available. An on-site inspection is possible. Redpfjzgwylsx Aczjw

Year of construction: 2016, condition: ready for operation (used), A vertical CNC self-loading vertical turning machine Pittler is available. Travel X1/X2: 1385mm/925mm, travel Z1/Z2: 500mm/480mm, feed force X/Z: 8kN, rapid traverse X/Z: 40m/min/24m/min, tool stations: 8, tool holder: VDI50, speed: 4000rpm, torque: 63Nm. Machine dimensions X/Y/Z: 4800mm/4250mm/3900mm, weight: approx. 17000kg, control system: Siemens Sinumerik 840D sl. Documentation available. An on-site inspection is possible. Rodszgwy Sspfx Aczew

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Rsdpfszfp Hhsx Aczsw

Year of construction: 2013, condition: ready for operation (used), A CNC slant bed lathe Focus is offered. Swing diameter over bed: 600mm, max. turning diameter: 330mm, max. turning length: 669mm, spindle bore: 88mm, spindle speed: 3400rpm, travel X/Z: 260mm/762mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, tool stations: 12, tool holder: VDI40, quill diameter: 85mm, tailstock taper: MK4, controls: Siemens. Weight: approx. 5700kg, machine dimensions: X/Y/Z: approx. 3600mm/1800mm/1800mm. Inspection possible by appointment. Rsdezfaafjpfx Aczew

Year of construction: 2003, condition: ready for operation (used), Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible. Rjdozdum Depfx Aczew

Condition: new, Distance between centers 2000 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Redpfx Aozdr Skoczow Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, rotational speed (min.): 25 rpm, rotational speed (max.): 1,500 rpm, Distance between centers 1000 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm Rsdpfx Aszdr Ryjczow spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1500 mm Max. swing over bed 560 mm Rsdpjzdr I Sjfx Aczjw Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1500 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 - 250 1/min Spindle speed 2: 250 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Rjdpfx Ajzdr I Esczow Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1000 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 - 250 1/min Rodpfxszdr Ifs Aczsw Spindle speed 2: 250 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, overall weight: 1,970 kg, total height: 1,700 mm, total width: 1,080 mm, total length: 2,700 mm, Distance between centers 1500 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm Rjdpfx Ajzdr H Uoczew spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 25 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, overall weight: 1,720 kg, total height: 1,700 mm, total width: 1,080 mm, total length: 2,200 mm, Distance between centers 1000 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 25 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm Rjdpfezdr Hujx Aczsw If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, overall weight: 1,775 kg, total height: 1,320 mm, total width: 850 mm, total length: 2,450 mm, Spitzenweite 1500 mm Rsdpjzdr E Defx Aczow max. Schwenkbereich über Bett 410 mm max. Schwenkbereich über Schlitten 255 mm max. Schwenkabstand 580 mm Spindelbohrung 52 mm Spindelkonus Camlock D1-6 Spindeldrehzahl 1: 30 - 550 1/min Spindeldrehzahl 2: 550 - 3000 1/min Verfahrweg Querschlitten 225 mm Verfahrweg Oberschlitten 100 mm Bei jeglichen Fragen zur Maschine, sowie einer Terminierung zur Besichtigung, bitten wir Sie uns einfach telefonisch oder per Mail zu kontaktieren. Schauen Sie sich gerne unsere anderen Anzeigen an, um einen vollständigen Überblick über unseren Lagerbestand zu erhalten.

Condition: new, overall weight: 1,150 kg, total height: 1,320 mm, total width: 850 mm, total length: 1,940 mm, Distance between centers 1000 mm Max. swing over bed 410 mm Max. swing over carriage 255 mm Max. swing in gap 580 mm spindle bore 52 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 -550 1/min Spindle speed 2: 550 - 3000 1/min Rodpfx Acezdr Ewjzjw Travel cross slide 225 mm Travel top slide 100 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), The item up for auction is a telescopic conveyor belt from CALJAN. I have many other conveyors available in my other auctions – feel free to browse. Transportation is possible. Rsdpfjzdrybjx Aczjw Transport ist möglich.

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Rodpfxezdpvgo Aczow Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.