ImmoBau Verwertungsgesellschaft mbH

Year of construction: 1991, condition: good (used), ENGELSMANN RM 200 drum mixer for barrels Suitable for barrels with a capacity of 100 - 200 liters Mixing speed: 26 RPM Fpsdpfx Ajzkrktjatji Drive power: 0.37 kW Manufacturer: Engelsmann Year of manufacture: 1991 Space requirement: 110 x 150 x 120 cm

Condition: used, GRIESER Type: VPL 3.0 Fjdpfx Aszix Ehsatopi Total volume of the mixing chamber: 3.0 liters Usable volume: 0.3 to 2.0 liters Pressure in the mixing chamber: 0 to 1.2 absolute Pressure in the stainless steel double jacket: N/A Critical speed: 1800 1/min Speed range under load: Impeller mixing tool: 38-282 1/min Scraper: 9-90 1/min Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3 kW Rated current: 5.0 A Main switch: 32A Fuse: 16A Weight: 250 kg Sold from our location! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Dissolver Niemann KDV 491-50 Power: 37 kW Speed range: 300-1400 rpm Niemann Speedcontrol All functions controlled via the control panel New clamping jaws Electric container clamping device Fjdpfx Aaozidpxetjpi Control cabinet

Condition: ready for operation (used), Dissolver Niemann KDV 241-25 Fpedpfxjzidd As Aatsi Power: 18 kW Speed range: 290-1650 rpm Niemann Speedcontrol All functions controlled via the control panel New clamping jaws Electric container clamping device Control cabinet

Year of construction: 2009, condition: ready for operation (used), Max. solids throughput: 5m³/h, suspension flow: 20-30m³/h, drive power: 45-75kW, speed range: 500-1800/min, delivery pressure: less than 3.5bar, batch volume: 300-15,000l. Equipment: solids feed via rotary valve, downstream solids disperser, acceleration chamber, cyclone with laminar flow section, conical compaction zone with housing cooling, solids feed tunnel with safety slide valve, mains-powered pump, batch tank with agitator, rotor as liquid ring pump, suspension outlet at the largest diameter. Suitable for resin dispersions, architectural paints, industrial coatings, filler pastes, pigment dispersions, automotive coatings, UV coatings, fire protection coatings, marine paints, gelcoats, gravure inks, newspaper rotary printing inks, heatset inks, coldset inks, sheetfed offset inks, flexographic inks, screen printing inks, inkjet inks, extenders, food and beverages, pharmaceutical and cosmetic products, pastes made from pyrogenic silica, aluminium oxide pastes, plastisols, foam-free aqueous suspensions, casting resins. The machine has been used very little, with control cabinet, powder container, pressure load cells and operating manual. An on-site inspection is possible. Fpedpfx Aaozh Nhqetoi

Year of construction: 2014, condition: used, Capacity / kg/h / type / material / Two-component (2K) adhesive dispensing and mixing system – FERE / Walther Pilot For sale: a used, fully automatic 2K adhesive dispensing and mixing system. Manufacturer: FERE Dosier- und Klebesysteme GmbH Fpodpfxjzhxnaj Aatoi Year of manufacture: 2014 Material pressure: up to 6 bar Control voltage: 24 V DC Operating voltage: 3 × 400 V / N / PE Dispensing system: Servo-electric drive Includes Walther Pilot pressure vessel and pneumatic cylinders The system was used for dispensing and mixing 2K adhesives on trim strips and is also suitable for similar applications. Used condition Sold as shown Viewing possible by appointment Assistance with loading available Please contact us if you have any questions or are interested.

Condition: like new (used), Dissolver VMA Getzmann Dispermat CN 40 Power: 2.2 kW Speed range: 0-5500 rpm Dissolver disc: 125 mm Fjdpszddvpofx Aatopi Basket mill Torusmill TML5-MS-S10 Double-walled mixing container, 5 liters, polished stainless steel 1.4571 Complete documentation available Like new, in top condition!!!

Condition: used, Stainless steel inline mixer, mixing screw, paddle mixer Diameter: 280mm Fpsdpfxszc Idno Aatsi Length: 3000mm Motor power: 2.2kW, 30 rpm See our other listings. VMA Wekerom

Condition: used, Stainless steel Nauta mixer Conical mixer Mixing capacity: 300 liters Stainless steel mixing vessel and mixing ribbon Drive unit has been repainted Fjdezc H Tzspfx Aatjpi See our other listings VMA Wekerom

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Fsdpszabnzefx Aatjpi Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.261, Like-new 2-component mixing and dispensing system Mur.Tech KMD-3000 V2 (year of manufacture 2026), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material feed thanks to an eccentric screw pump. This V2 version is additionally equipped with container heating (30–150 °C per container) and vacuum degassing of the materials – ideal for temperature- and bubble-sensitive applications. Highlights: - Modular design: complete material flow path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material temperature control throughout the entire material path - Material change in just a few minutes – almost no material loss - Stator change with only 3 screws – service without production downtime - Pinch valve and mixing tube change without tools in seconds - Lightweight mixing head made of carbon / aluminum / GRP – ergonomic - Swivel arm for fatigue-free handling (robot mount can be retrofitted) - Mobile thanks to the roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V2, year of manufacture 2026 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, stepless Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, capable of withstanding overpressure and vacuum, with electric inclined blade stirrer Container heating: heating jacket per container, temperature range 30–150 °C Material degassing: vacuum pump, both containers can be switched (individually with full performance or simultaneously with half performance) Mixer: static or dynamic possible Operation: gun or touch HMI Control: Beckhoff IPC with 15.6" touch HMI Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Level monitoring of the material containers - Clogging monitoring - Condition monitoring of the pinch valves - Flow measurement and bubble detection Discharge methods: continuous, pulsed, by weight Connection: 400 V / 16 A, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Data logging: Recording and saving the potting data in the Mur.Tech Cloud is possible upon request. The analysis over a longer period helps to improve efficiency and to detect maintenance cycles early. Connection to the company network is possible both wirelessly and via cable. Application areas: adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of delivery: system, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: spare parts supply and service by the original team. Sold as seen, with exclusion of all warranties. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment. Fpodpjy Txfxefx Aatsi

Condition: used, Conical mixer, Nautamix, Nauta N.V. Mixing capacity: 1000 liters Stainless steel mixing vessel and mixing screw Drive shaft made of steel Fpodpey Tlgpsfx Aatoi Motor power: 4 kW and 0.55 kW Upper cone diameter: +/- 1700 mm Equipped with a pneumatic discharge slide valve See our other listings.

Year of construction: 2009, condition: ready for operation (used), A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible. Fpedjy Nna Djpfx Aatsi

Year of construction: 2019, condition: used, We offer this used Megatrex ATREX CD1000 G600 continuous grinding, mixing and dispersing unit (high-shear rotor system). Manufacturer: Megatrex Oy Model: ATREX CD1000 G600 Serial number: 4255 Year of manufacture: 2019 Condition: used Category ID: 507 Machine type: Continuous industrial mixer / disperser The machine is currently equipped with a 355kW motor and a compatible variable frequency drive. If the buyer plans to install a larger motor, we can also sell the machine without the motor and vfd. Fpodsy Eyv Aspfx Aatoi The equipment is located in Lohja, Finland, and is currently not connected to utilities, i.e., is ready for transport. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 300062271 / 800305248, Equipment: CE marking, NEW (USED for 1 test) The HABITAT control tower package is ideally suited for HABITAT’s cell culture applications, enabling advanced monitoring and control of bioprocesses. This package features the control unit with comprehensive connection options for gas supply, liquid addition, sensors, and temperature regulation, complemented by a tablet for straightforward and clear operation of the bioreactor. Process Control & Monitoring: All bioprocess parameters and associated test values can be conveniently managed and monitored via the integrated tablet, which is attached to the control unit. The intuitive, user-friendly software allows selection between batch, fed-batch, and perfusion/continuous operation modes, depending on your cultivation requirements. The new 'Chaotic Mixing' feature enables rapid and effective mixing when needed. The 10.4-inch touchscreen tablet provides direct access to all actuators from the main interface. Key functionalities include clear calibration management, diagram overviews, and comprehensive process documentation. An optional software version compliant with FDA CFR Part 11 requirements is available. Key Features: - Compact, space-saving design: 223 x 402 x 450 mm (WxDxH) - Large 10.4-inch tablet for user-friendly operation - Intuitive software with extensive features - 4 integrated Watson Marlow fast-load pumps - Multiple interfaces: USB, PC, RS232, Ethernet, external signal input, external pump, single-use unit, thermostat - Data storage capabilities The 1L vessel set for the HABITAT research bioreactor includes a 1-liter single-walled glass vessel designed for cell culture applications, alongside a compatible stirring drive. In conjunction with the separately available control tower package (e.g., HABITAT cell), you receive all essential components for successful cultivation. Fpedpfx Aasy D Rq Uotoi

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, We are offering this as-new Anthratec FM200W drum mixer, year of manufacture 2025. Manufacturer: Anthratec Model: FM200W Year: 2025 Condition: As new Category ID: 507 Type: Drum mixer Details: The FM-200 drum mixer features modern frequency inverter control (FU control) and a timer function, ideal for industrial applications. The machine offers stepless speed regulation from approximately 6 to 26 rpm, allowing for optimal adjustment of various mixing processes. The integrated timer enables precise runtime settings; after the preset time elapses (up to 99 hours, 59 minutes, and 59 seconds), the machine stops automatically. Control is provided via reliable Siemens technology, installed in a robust Rittal control cabinet. For added safety, a braking motor securely locks the drum holder during loading. This can be released via a button in the handling area, allowing for manual drum rotation if necessary. The equipment also includes an emergency stop switch and electronic monitoring of the protective enclosure with automatic machine shutdown. The machine is supplied ready for connection with a 5-meter power cable, including a CEE 16A plug. A particularly practical feature is the integrated steel drip tray with a volume of approx. 220 liters. It is designed so that when shifting the protective housing, the tray moves under the machine, freeing up the handling area. Additionally, the machine is forklift-compatible for easy transportation and loading. A major advantage of this machine is its flexibility: Various collets are available from the manufacturer, so in addition to the currently installed holder for a 200-liter bunghole drum, other container sizes can also be processed without issue. Manufacturing is according to the latest standards, exclusively with European components and in high-quality “Made in Germany” quality. Complete documentation and a CE declaration of conformity are included. Fpsdpfxjy D I N Ue Aatsi If you have any questions or need further information, please feel free to send us a message or call us.

Year of construction: 2017, condition: ready for operation (used), First vessel chamber pressure min./max.: -0.1MPa/0MPa, max. second vessel chamber pressure: 0.4MPa, min. process temperature: 0°C, max. vessel chamber process temperature 1/2: 100°C/152°C, vessel chamber volume 1/2: 241l/27l, vessel chamber test pressure 1/2: 0MPa/0.77MPa. Documentation available. An on-site inspection is possible. Fpedjy Aad Ujpfx Aatji

Year of construction: 1981, condition: excellent (used), functionality: fully functional, loading space volume: 4.5 m³, machine/vehicle number: 50431, High-capacity industrial mixer with heating jacket and explosion-proof motor. Manufacturer: Draiswerke GmbH (Germany) Model: S-4500 Year: 1981 Total Volume: 4500 Liters Jacket Volume: 270 Liters (Heating/Cooling) Operating Temp: Max 150°C Jacket Pressure: 3 bar Motor: 30 kW AEG (Explosion-Proof / Ex-rated) Power: 380V / 50Hz / 1480 RPM Key Features: Horizontal Jacketed Design: Suitable for steam heating or water cooling. Fpodpfxeyy Szto Aatsi Robust Build: Designed for powders, granules, and heavy industrial pastes. Included: Industrial reduction gearbox, access platform, and stairs. Condition: Used, functional, high-quality German engineering.

Condition: ready for operation (used), A compact steam boiler system Gebrüder Lödige is available. Boiler content: 610l, jacket content: 45l, max. boiler operating pressure: 1bar, max. jacket operating pressure: 1.5bar, max. operating temperature: 110°C. Including control box. An on-site inspection is possible. Expected to be available June 2026. Fodpfx Aaeyypmtotopi

Year of construction: 1962, condition: ready for operation (used), A horizontal ploughshare mixer Gebrüder Lödige is available. Total volume: 300l, usable volume: 225l, mixing chamber diameter: 640mm, mixing chamber length: 1000mm, inlet opening diameter: 250mm, ground clearance: 800mm, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available June 2026. Fjdpfx Aeyxramjatjpi

Condition: ready for operation (used), A container mixer, probably Engelsmann, is available. Container dimensions X/Y/Z: 1200mm/1200mm/900mm, volume: approx. 500l, machine dimensions X/Y/Z: approx. 2750mm/2000mm/2200mm. An on-site inspection is possible. The manufacturer statement is a well-founded assumption. Expected to be available June 2026. Fpjdpfoyxraaox Aatei

Year of construction: 2002, condition: ready for operation (used), A double column cold mixing system Mixaco is available. Material: steel, usable volume: 800l, motor power: 30kW, mixing vessel: conical, mixing blades: dispersion blades, machine dimensions X/Y/Z: 2900mm/2850mm/3500mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible. Fpsdpfoyxgqyox Aatji

Year of construction: 2013, condition: ready for operation (used), A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible. Fpjdjywlplopfx Aatsi

Year of construction: 2023, condition: ready for operation (used), A continuous twin-shaft paddle mixer WAM is available. Throughput capacity range: 5m³-12m³/h, max. liquid addition: 20%, material: 1.4404, process: mixing/conditioning/granulation/neutralization, weight: approx. 700kg. Documentation available. An on-site inspection is possible. Fpjdpfeywlprox Aatsi

Year of construction: 1996, condition: ready for operation (used), Suction capacity: 6m³, suction pressure: 20 mbar, mix outlet dimensions: 750x800mm. Includes documentation. On-site inspection is available. Fodpfeyv H H Nox Aatopi