Pap-Serv

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Equippment: Iiodpfxs Aaq Utj Ad Noh 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 5 Standard slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: used, Year of construction: 1998, x-travel 600 mm y-travel 430 mm z-travel 460 mm Control MSD-501 table surface area 900 x 500 mm T-slots (number x width x distance) 5 x 18 x 100 mm table load capacity 500 kg Spindle nose table removal 150 - 610 mm spindle tunring speed 12.000 U/min torque 166,7 Nm tool taper BT 40 number of tool places 30 Pos. max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm Iodps Aaq Umofx Ad Neih max. tool length 300 mm max. tool weight 8 kg Feed ( x / y / z) 16.000 mm/min rapid traverse ( x / y / z ) 32.000 mm/min The machine is from its First owner and has low operating hours. It is very well maintained and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system - Tool measurement - 30-position tool changer BT 40 Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 2002, turning diameter 190 mm turning length 120 mm control MSG-501 max. swing diameter 250 mm Distance between centers 750 mm bar passage 40 mm x-axis 135 mm z-axis 450 mm y-axis ±40 mm spindle tunring speed 6.000 U/min number of tool places 16 Pos. Number of working hours ca. 1.230 h The machine is from its first owner and has low operating hours. It is very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor - Parts catcher and conveyor belt - High-pressure cooling - 16-station upper turret with Y-axis - Bar feeder interface - Hainbuch collets - Three-jaw chuck Iijdpfs Aaq Ugsx Ad Njh - Fixed and driven tool holders Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Year of construction: 2011, condition: used, Year 2011 Condition: Used Iodpfx Ads Aaq Uas Njih Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2014, x-travel 1060 mm Iiedpfxs Aaq T Ns Ad Njh y-travel 520 mm z-travel 610 mm control Siemens weight of the machine ca. 5900 kg

Condition: used, Year of construction: 2016, x-travel 1020 mm y-travel 700 mm z-travel 500 mm control Heidenhain iTNC530 Iisdpfo Aaq T Aox Ad Neh

Condition: used, Year of construction: 2017, turning diameter 8 till 38 mm turning length 250 mm control Fanuc Ijdpfx Ado Aaq Tvo Nsih

Condition: used, Year of construction: 2017, turning length 210 mm Isdo Aaq Tpjpfx Ad Noih control Fanuc

Condition: used, Year of construction: 2014, x-travel 1600 mm y-travel 820 mm Ieds Aaq Tiepfx Ad Neih z-travel 700 mm control Heidenhain iTNC530 weight of the machine ca. 7500 kg

Condition: used, empty load weight: 2,860 kg, maximum load weight: 9,410 kg, overall weight: 12,800 kg, axle configuration: 2 axles, first registration: 10/2010, loading space length: 5,500 mm, loading space width: 2,450 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: orange, Year of construction: 2010, gearing type: other, driver cabin: other, Equipment: ABS,

Condition: used, Year of construction: 2007, temperature max. 450 ° internal length of the oven 1500 mm internal width of the oven 1500 mm internal height of the oven 2000 mm Iijdpfe Aaq Srjx Ad Nsh total power requirement 65 kW weight of the machine ca. 12.800 kg dimensions of the machine ca. 2,4 x 2,4 x 2,72 m

Year of construction: 2020, condition: used, This listing is for Agilent Technologies Magnis NGS Prep System The unit is in full working condition and ready for immediate use The Agilent Magnis NGS Prep System is a compact, fully automated benchtop platform designed for next-generation sequencing library preparation. It streamlines complex workflows, offering walk-away automation, consistent reproducibility, and high-quality results for genomics laboratories. Transparency Report and Technical Audit: Iiedpfj Aaq Sljx Ad Neh Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 2004, turning diameter 820 mm turning length 2000 mm control Siemens 840 D z-travel Z1=1980 Z2=2290 mm x-travel X1=500 X2=500 mm workpiece weight 1600 kg spindle nose A15 main spindle bore 160 mm feeds x-axis 0,1-18.000 mm/min Iodpfx Adj Aaq Sfo Neih rapid traverse X-axis 18 m/min feeds z-axis 0,1-24.000 mm/min rapid traverse Z-axis 30 m/min turret I 16 Wkzg. turret II 16 Wkzg. tool taper Capto C6 voltage 400 V total power requirement 180 KVA weight of the machine ca. 36 t dimensions of the machine ca. 9,7x2,5x4 m

Condition: used, Year of construction: 1987,

Condition: used, Year of construction: 1987,

Condition: used, Year of construction: 2015, grinding diameter - cylindrical/face 203 mm regulating wheel width 247 - 330 mm max. width of grinding wheel 380 - 508 mm control SIMATIC HMI TP700/KP400 weight of the machine ca. 8,10 t dimensions of the machine ca. 6,00 x 4,10 x 2,50 m Retrofit in 2015 (Huttelmaier), new in 1964 Dressers for grinding and regulating wheels MPM BM50 automatic balancing system Motorized feed axis Incremental steps: 0.001/ 0.005/ 0.010/ 0.100 mm Infeed conveyor with two-hand operation Frasch FP66N-zw belt conveyor Semotec system for finished parts POLO Filtertechnik unit Extraction system (switchable via auxiliary equipment) Nold Hydraulik und Pneumatik hydraulic power unit Central lubrication system with fill-level indicator Iisdpo Aaq Rzefx Ad Noh Infeed handling system for plunge-grinding operations

Condition: used, functionality: fully functional, mileage: 265,571 km, first registration: 07/2026, Year of construction: 2008, operating hours: 3,019 h,

Condition: used, mileage: 111,646 km, fuel type: diesel,

Condition: used, Year of construction: 1997,

Condition: used, Year of construction: 2006, overall weight: 16,000 kg, maximum load weight: 12,400 kg, empty load weight: 3,600 kg, loading space width: 2,460 mm, loading space length: 7,200 mm, loading space height: 2,400 mm, Equipment: cooling unit,

Condition: used, functionality: fully functional, overall weight: 16,000 kg, loading space length: 7,300 mm, loading space width: 2,480 mm,

Condition: used, Year of construction: 2010, overall weight: 16,000 kg, loading space width: 2,460 mm, loading space length: 7,300 mm, loading space height: 2,520 mm,

Condition: good (used), empty load weight: 2,830 kg, maximum load weight: 15,170 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2021, next inspection (TÜV): 02/2027, suspension: air, tire size: 235/75R17,5, Equipment: ABS,

Condition: excellent (used), functionality: fully functional, total length: 1,820 mm, total width: 2,244 mm, empty load weight: 600 kg, Equipment: documentation/manual,

Condition: good (used), Code: 0499 Brand: COMAFER Model: DINAMIC 70/60 - CE Standard Hydraulic briquetting machine for compacting sawdust and wood shavings, for joinery workshops, furniture, bespoke furnishings, wooden joinery and other applications – CE Standard Technical data: The advantages of briquettes are: Twice the calorific value of wood Iiedpfo Aaq Nkox Ad Nsh Almost no residue after combustion Much cleaner boilers Briquette diameter 65 mm Output 30/80 kg Pump motor 7,5 Hp Wood chip hopper diameter 1000 mm Overall dimensions mm 1100 x 1800 x 1650 h Weight kg 800