Burus József E.v

Condition: excellent (used), HOMAG KDF650 edge banding machine Top pressure beam for material clamping, Application of liquids, Pre-milling cutters, Glue application, Preheating unit with glue pot QA65N Additional glue pot Pneumatic preliminary trimming guillotine, Pressure rollers Final trimming cutters, R1-R2 top and bottom milling unit 2x R1-R2 corner rounding unit Multi-profile cycling cutter R1-R2 Flat cycling cutter, Application of liquids Polishing unit, Nesting The machine has NC control; all settings and functions are controlled from the control panel. Max. component height: 60 mm, Max. edge band thickness (roll): 3 mm, Feed speed: 8-18 m/min The machine is in very good condition and is only slightly different from a new machine. Operating hours: 1048 h Fgsdpfx Acs Aiuidotji

Condition: used, OTT Tornado - TOP Control system - via a 15-inch color touch monitor for full automation and maximum ease of operation. CM-CombiMelt gluing system – suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Joint processing unit for attaching chipboard. Automatic roll magazine. Automatic edge magazine. Fgjdpfx Acs Aitllstei Double-head unit with automatic pivoting 0° / 3°. Flush trimming unit – for flush trimming – 12mm. Fine milling unit RADIUS – for radius milling – profile cutter R2 – R5. Automated contour milling – for rounding corners. Pull knife unit – radius. Surface pull knife unit. Lubricant spray system – PU. Cleaning set with fine wiping device. Very stable workpiece support with roller conveyors – FRONT with scissor lift. Complete tool set included. Machine is in EXCELLENT CONDITION. Machine is from a lease return. First delivery in 2012. Available from stock in Lieboch.

Condition: used, Holz Her Sprint 1329 Multi Heavy-duty version - Edge thickness 0.4 - 8 mm (15 mm with tool change) Edge Control 19 control system, 18.5" touchscreen color display 16:9 ECO mode - energy-saving mode fa.s.t. setting technology "Tool change in the gap" iTronic - adaptive pressure and adhesive application control and cleaning routine Motorized, position-controlled bridge height adjustment Long infeed guide rail, motorized, controlled via PLC Pre-milling unit for attachment before the gluing station Edge magazine, fully automatic for coil and strip material Gluing unit GLU-JET GJ301 automatic, cartridge system - granulate + PU adhesive, thin-film technology Edge height max. 65 mm Pressure unit DW 501, motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment for 0-10° bevel of the cutting saw Fgodpfs Aitldox Actji Multi-function milling unit MOT6 – 6 NC control axes, including air blow nozzles Flush trimming 8 mm (15 mm) Radius trimming Chamfer trimming 45° Copy milling unit MOT 6 Multi, corner copying, postforming corners with 6 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end face, vertical edge, working height 60 mm with shelving program, including air blow nozzles Scraping unit MOT6 Multi, including air blow nozzles and chip scraper Surface scraping unit - finishing with pre- and post-scanning, including air blow nozzles Buffing unit for final polishing and edge polishing with 2 textile discs, swiveling 5° Spray device for infeed and outfeed area as well as antistatic agent and lubricant at the pressure unit Infeed area - electronically controlled release agent spray device Before the pressure unit - electronically controlled antistatic spray device After the pressure unit - electronically controlled lubricant spray device Outfeed area - electronically controlled cleaning agent spray device with cleaning agent First delivery 2022, very few running meters, from a craft business Machine is WORKSHOP INSPECTED in TOP CONDITION / Leasing possible Ex works

Condition: used, Holz Her Sprint 1321 FÜ + PU heavy-duty version - edge thickness 0.4 - 15 mm SPS screen control Edgecontrol motorized, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing station fully automatic edge magazine for roll and strip material glue application station, cartridges + PU gluing automatic glue height adjustment / touch probe nozzle pressure unit 1913, pneumatic cutoff unit for roll and strip material 1918 - 15 mm with pneumatic adjustment of the cutoff saw angle from 0-10° multi-function milling unit with motorized adjustment: flush trimming - 15 mm, radius and chamfer milling - 15° flush milling unit - corner rounding 1833 Fedpfj Aitifsx Actogi edge trimming unit for chamfers and radii 1929, pneumatic pneumatic infeed and outfeed surface trimming unit - finish, pneumatic buffing unit for final polishing and edge polishing with 2 textile discs HIGH-END spray system complete tool set Machine is FUNCTIONAL Machine from a craft business / brokerage sale Available from stock in Lieboch, NET € 19,000.00

Condition: used, Holz Her Auriga 1308 XL Black Edition Compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control 19 with 18.5" touchscreen monitor “Eco-Mode” energy-saving mode Pre-milling unit for attachment before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 8-60 mm Automatic glue height adjustment Pressure unit, pneumatic Trimming unit, pneumatic for coil and strip material up to 8 mm edge thickness Fgedpfx Ace Aitg Dotei with pneumatic adjustment of 0-10° bevel on the trimming saw Multi-function milling unit MOT4, flush trimming 8 mm, radius milling - chamfer milling 15° via NC axes ProLock system for quick tool changes Profile milling unit - rounding of edges up to 3 mm edge thickness in a single pass via NC axes Shelf program for shelves with rounded front edges Scraper unit MOT4 for bevels and radii with 2 scraper holders via NC axes, high-gloss package with motorized adjustment of the horizontal guide rollers Surface scraper unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area Complete DIA tool set included Machine with very few operating hours, from a small workshop First delivery 2018 Machine in TOP condition Available from stock in Lieboch

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Fjdo Aitf Uspfx Actjgi Available from stock, Lieboch

Condition: used, Holz Her STREAMER 1057 CNC + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Pre-milling unit for edge preparation before the gluing process Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatic, for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Fgodps Aitdtjfx Actoi Surface scraping unit - for finishing Spray device - PU Machine with all processing tools Machine is WORKSHOP TESTED in TOP CONDITION

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm Fsdpfxo Aitdao Actjgi PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Hebrock K34 Edge thickness up to 8mm PLC-controlled touchscreen with a 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Fgsdpfs Aitb Usx Actei Gluing station with interchangeable glue containers and glue dispensing system Edge height max. 60 mm Trimming unit Milling unit for flush cutting, radius, and chamfer milling Corner rounding unit for radii/chamfers Multi-radius trimming blade (R1/R2) Nesting Surface trimming blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW CONDITION and in TOP SHAPE From a carpentry workshop liquidation/retirement sale Available from a carpentry workshop, SALES PRICE NET €45,000.00

Condition: used, Year of construction: 2012, functionality: fully functional, premilling unit endtrimmer multiprofilunit Ziehklinge Buffing Fgodj Airyaepfx Actsi up to 8 mm edge nc on infeed fence and pressure unit NC on multiprofil unit

Condition: excellent (used), Felder TEMPORA F600 edge banding machine Liquids Pre-milling cutters, Roller glue application, Replaceable tank, Second tank included, Pneumatic guillotine for pre-trimming, Liquids, Final trimming cutters, Top and bottom milling unit, Dual unit for corner rounding, Profile edge finishing, Cleaning liquids, Flat edge finishing, Polishing unit, Fsdpfx Ace Aira Hetogi The machine features NC control, Max. element height: 60 mm, Max. veneer thickness (roll): 3 mm, Feed rate: 10 m/min, Inspection and testing on-site are possible.

Condition: as good as new (ex-display), Year of construction: 2026, Hebrock F 4 - Demonstration machine with 37 operating hours - For complete processing of your panels For those who don't want to compromise. With the F 4, we offer a model that allows you to produce completely processed edges in just 4 meters of machine length. The F 4 is not only space-saving but also offers an excellent price-performance ratio. Max. edge thickness 3 mm Min/Max. workpiece thickness 8 – 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min Ready for operation in approx. 3.5 min Max. power consumption approx. 7.4 kW Electrical connection 400 V – 3 phases – 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (L x W x H) Weight approx. 820 kg Extraction nozzle Ø 1 x 140 mm PLC control with 10" touchscreen Top-mounted quick-heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner milling cutter) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change system incl. glue change device for PUR processing Surface scraper with dual sensing Pneumatic roller capping (scissor design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with firmly screwed special chain plates Joint milling cutter Milling unit Miter saw Corner milling cutter Accessories: Radius scraper (incl. pneumatic extraction) Multi-radius scraper (R1/R2) Pneumatic 3-point adjustment Fjdpfx Ao Aikb Ioctsgi Quick-change system for corner milling cutter Nesting for milling station and radius scraper Additional change motor for corner milling cutter with tool set The chassis shown in the pictures is not included with the machine. Location: In stock at 54634 Bitburg - available for immediate delivery -

Condition: used, Year of construction: 1998, edge thickness (max.): 3 mm, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Feed speed: max. 25 m/min Edge thickness: max. 3 mm Panel height: min. 14 mm Panel height: max. 55 mm Panel length: min. 350 mm Number of panel edge trimming and routing units: 3 Panel edge trimming and routing unit 1 Motor power: 7.5 kW Speed: 18,000 rpm Panel edge trimming and routing unit 2 Motor power: 7.5 kW Speed: 18,000 rpm Panel edge trimming and routing unit 3 Motor power: 7.5 kW Speed: 18,000 rpm Number of edge processing units: 3 Cutting unit Number of motors: 2 Motor power: 0.22 kW Speed: 17,250 rpm Fine routing unit for flush trimming and rounding Motor power: 1.5 kW Speed: 8,600 rpm Polishing unit Number of motors: 2 Motor power: 0.18 kW Speed: 1,375 rpm EQUIPMENT Processing of thin edges Processing of thick edges EVA hot melt adhesive system Pressure system with rubber belt Panel alignment system at the infeed Fsdj Aihx Rspfx Actjgi 3 routing/hogging units with CNC-controlled positioning Cutting unit Fine routing unit for flush trimming and rounding with CNC-controlled positioning Polishing unit Edge roller magazine with 2 positions Glue tank for EVA hot melt adhesive Pressure roller set with 4 pressure rollers CNC-controlled positioning of the pressure rollers Spray unit CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 3944

Condition: used, Year of construction: 2014, power: 22 kW (29.91 HP), edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Feed speed: max. 18 m/min Panel height: min. 10 mm Panel height: max. 60 mm Panel width: min. 70 mm Edge thickness: min. 0.4 mm Edge thickness: max. 12 mm Number of processing units: 9 Pre-milling unit Number of units: 1 Motor power: 2.2 kW Edge magazine and gluing Number of magazine positions: 1 Number of pressure rollers: 4 Edge processing units Number of edge processing units: 7 Fedpfx Acj Aihdletogi Cutting unit Number of motors: 2 Motor power per motor: 0.35 kW Flush trimming and rounding unit Number of motors: 2 Motor power per motor: 0.55 kW Corner rounding unit Number of motors: 2 Motor power per motor: 0.35 kW Grooving unit Number of motors: 1 Motor power: 3.5 kW Buffing unit Number of motors: 2 Motor power per motor: 0.18 kW MACHINE DETAILS Total connected power: 22 kW EQUIPMENT Processing of thin edges Processing of thick edges Processing of solid wood edges EVA hot melt adhesive system AIRTEK hot air system Overpressure with idle rollers Panel support guides Pre-milling unit with automatic, time-controlled operation Edge roller magazine EVA glue reservoir EVA pre-melter Set of pressure rollers with 4 pressure rollers NC positioning of pressure rollers Cutting unit Flush trimming and rounding unit with NC positioning Corner rounding unit WD60 Grooving unit Edge pulling unit with NC positioning Glue pulling unit Buffing unit Spray unit Machine programming software PowerControl PC20 CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 7517

Condition: used, Year of construction: 2018, IMA TUBES FILLER COMADIS C945 Tube filling machine with automatic tube feeding, print registration and a heated product hopper. Built in 2018; with only a few working hours. CHARACTERISTICS - Production hopper: 26 L heated hopper with cover (AISI 316L) - Dose adjustment: piston stroke with graduated scale - Dosing unit described: Pneumatic volumetric spear-valve unit, AISI 316; standard range stated as 15-300 ml - Product level control: Ultrasonic level regulator; 24 V signal for an external feed pump - Heating system: specified up to 60°C - Scraper stirrer: specified at 35 rpm PARTS - 1 set of Hot Air size parts for tube diam. 16 mm - 1 set of Hot Air size parts for tube diam. 50 mm - 1 set of size parts Delrim (POM) tube holders for tube diam. 16 mm - 1 set of size parts Delrim (POM) tube holders for tube diam. 50 mm - 1 coding block with spacers for plastic/laminate tube (8 digits places as standards) - 5 set of digits 0-9 for plastic/laminate tubes Fgedpj Aihdhsfx Actsi PRODUCTION - Mechanical cycles: up to 45/min - Standard tube dimensions: Diameter: 10-50 mm; Length: 60-250 mm - Machine filling-volume range: 2-300 ml nominal platform range; subject to dosing unit and size parts - Mechanical speed: 10-45 cycles/min (actual output depends on application) - Machine layout: 9-station rotary table; 1 filling nozzle

Condition: used, Year of construction: 2006, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Panel thickness: max. 50 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3.0 mm Feed rate: max. 11 m/min Number of panel processing/milling units: 1 unit Number of edge processing units: 5 units Pre-milling unit Motor power: 2.2 kW Speed: 1,600 rpm Cut-off saw unit Motor power: 0.18 kW Speed: 12,000 rpm Rough milling unit, top and bottom Motor power: 0.27 kW Speed: 12,000 rpm Edge rounding unit Number of motors: 1 unit Motor power: 0.35 kW Speed: 12,000 rpm Edge pulling unit Polishing unit Number of motors: 2 units Motor power: 0.10 kW Speed: 2,700 rpm MACHINE DETAILS Control system: PC 16 EQUIPMENT Pressure roller with idler rollers Edge roller magazine Glue pot for EVA hot-melt adhesive CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. Fedpfj Aihdaox Actogi External reference: 8555

Condition: used, Year of construction: 2008, edge thickness (max.): 20 mm, feed rate X-axis: 24 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Edge types: Thin edge, thick edge, solid wood Edge thickness: min. 0.3 mm Edge thickness: max. 20 mm Feed rate: max. 24 m/min Number of processing units: 8 units Number of edge processing units: 6 units Panel thickness: min. 12 mm Panel thickness: max. 60 mm Panel width: min. 55 mm Fsdpfs Aihc Sox Actjgi Overpressure: Present Overpressure design: Rubber belt Panel support guides: Present Positioning of panel support guides: NC-controlled Pre-milling unit Number: 1 unit Automatic time-controlled engagement: Present Motor power: 3 kW Speed: 9,000 rpm Gluing Glue system: EVA hot melt adhesive Glue reservoir for EVA hot melt adhesive: Present Pre-melter for EVA hot melt adhesive: Present Pre-melter model: HOT MELT A34 Edge magazine: Present Magazine positions: 2 units Pressure rollers: 7 units End capping unit Model: HL 81 Number of motors: 2 units Motor power per motor: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 units Motor power per motor: 1.5 kW Speed: 12,000 rpm EQUIPMENT Pre-milling unit Corner rounding unit End capping unit HL 81 Flush trimming unit, top and bottom NC-positionable panel support guides Overpressure with rubber belt Edge magazine with 2 positions EVA glue reservoir EVA pre-melter HOT MELT A34 7 pressure rollers Preheating lamps for panel sides The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing and use of the machine at the destination. External reference: 4592

Condition: used, Year of construction: 2016, workpiece height (max.): 60 mm, edge thickness (max.): 5 mm, feed rate X-axis: 12 m/min, TECHNICAL DETAILS Workpiece Machining Min. panel thickness: 8 mm Max. panel thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 5 mm Max. feed rate: 12 m/min Positioning: NC-controlled Units Number of edge machining units: 6 Pre-milling unit Automatic, time-controlled engagement Cutting unit Number of motors: 1 Motor power: 0.8 kW Speed: 12,000 min⁻¹ Flush-milling and rounding unit Number of motors: 2 Motor power per motor: 0.65 kW Speed: 12,000 min⁻¹ Corner rounding unit Number of motors: 2 Motor power per motor: 0.65 kW Speed: 12,000 min⁻¹ Edge pulling unit Gluing unit Fjdpe Aihcysfx Actjgi Polishing unit Number of motors: 2 Motor power per motor: 0.25 kW Speed: 1,350 min⁻¹ MACHINE DETAILS Control Operating system: Windows Programming software: SINTRA Safety standard CE marking EQUIPMENT Pressure unit with idler rollers Panel support guides NC positioning Edge roller magazine Glue reservoir for EVA hot melt adhesive Pressure rollers for edges Spray unit

Condition: used, Year of construction: 2013, workpiece width (max.): 1,200 mm, workpiece length (max.): 3,000 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, TECHNICAL DETAILS Panel thickness: min. 12 mm Panel thickness: max. 60 mm Panel length: min. 240 mm Panel length: max. 3,000 mm Panel width: min. 120 mm Panel width: max. 1,200 mm Edge thickness: min. 0.3 mm Edge thickness: max. 3 mm Feed rate: max. 25 m/min Pressure: Rubber belt Pre-milling unit Model: S2 Motor power: 3 kW Speed: 9,000 rpm Engagement: Automatically timed Number of magazine slots: 24 pcs. Glue application: EVA hot melt adhesive Pre-melter: For EVA hot melt adhesive Edge pressure: Roller unit Positioning: NC-controlled Number of processing units: 7 pcs. Cross-cut saw unit Model: HL 84 Number of motors: 2 pcs. Motor power per motor: 0.4 kW Speed: 12,000 rpm Flush trimming unit (top and bottom) Model: BF10 Number of motors: 2 pcs. Motor power per motor: 0.55 kW Speed: 12,000 rpm Edge rounding unit Model: FK 11 Number of motors: 2 pcs. Chamfering unit Number of motors: 1 pc. Positioning: NC-controlled Engagement: Automatically timed Scraper units Edge scraper: PN20 Joint scraper: Available Polishing unit Number of motors: 2 pcs. MACHINE DETAILS Programming software: PowerTouch PC23 Automation unit: HOMAG PROFI TBL100/20/25/F Outfeed automation: HOMAG ZHR 30/L/125/F Fgjdpfx Aco Aihcrjtei Feed rate of outfeed automation: max. 25 m/min Panel outfeed: Via transfer roller conveyor EQUIPMENT Transfer roller conveyor for panel outfeed CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Stefani Solution XD Year of manufacture: 2017 Technical data Feed speed: 25 m/min Board thickness: 8-60 mm Edge thickness: 0.3-22 mm Rolled material: up to 3 mm Edge trimming unit Gluing unit Cutting unit Flush trimming unit Corner rounding unit Fgjds Aiglbopfx Actsi Profile trimming blade Surface trimming blade Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2022, machine/vehicle number: AH00003901, functionality: fully functional, input voltage: 400 V, input current: 37 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 60 mm, height adjustment type: electric, actuation type: electric, overall weight: 2,650 kg, Equipment: CE marking, documentation/manual, used SCM Stefani KD edgebander in HP configuration, year 2022. The machine is in excellent condition and can be seen running. Units: RT/E pre-milling unit with diamond cutters (H 64 mm) VC800 gluing unit with pre-heating for EVA glue Automatic edge feed from coil and strips K/SEL end trimming unit, tilting 0–15° R-HP Multiedge tilting trimming unit for 2 radii (4-axis positioning) Round K corner rounding unit R-HP Multiedge radius scraper for 2 radii and RAS/V scraper Fedpfe Aifpwsx Actjgi RCA/2C flat scraper Buffing brushes Additional equipment: Startouch 12" control, ready for a barcode reader Top pressure belt instead of wheels, which protects matt and gloss panels Easy Size (automatic infeed fence positioning) Spray units for anti-adhesive, cleaning and gliding agents Infrared ceramic lamp 1700 mm extendable support for workpieces up to 2200 mm wide Copying wheel kit for nesting panels CE Technical data: Feed speed: 10–20 m/min Panel thickness: 8–60 mm Coil edges: up to 3 × 45 mm Solid wood edges: up to 8 mm

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. Fsdpfx Aj Ah Simectsgi 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: used, Year of construction: 2005, machine/vehicle number: 5819, functionality: fully functional, power: 5.8 kW (7.89 HP), input voltage: 400 V, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, For sale is a professional and reliable Hebrock Euro 2000 (Plus) edge banding machine from 2005. The machine is in very good, fully functional condition. The glue pot is in perfect condition and heats up quickly and cleanly. The machine can be tested and demonstrated on-site while powered. Features & Highlights: Manufacturer: Maschinenbau Hebrock GmbH (Made in Germany) Model: Euro 2000 / Plus Year of manufacture: 2005 Machine no.: 5819 Glue pot: Quick-heating hot melt glue container (heating time approx. 6 minutes) – fully functional and clean Cutting unit: Pneumatic roller cutting / sawing unit for precise trimming of front and rear edges Routing unit: High-frequency flush and radius routing unit (flush, bevel, and radius routing) Operation: Ergonomic control panel with digital adjustment for quick format and edge changes Edge material: Suitable for roll and strip material (e.g. ABS, PVC, veneer, wood strips) Chassis / Transport: Includes device for easy transport within the workshop Technical data: Connection: 230 / 400 V – 50 Hz Power consumption: 5.8 kW Current: 11.6 A Feed speed: approx. 10 m/min Extraction nozzle: Ø 100 mm Included: Dust extraction system with filter bag (see pictures). Condition & Collection: Condition: Used, well-maintained, ready for immediate use. Test run: A test run / demonstration on-site is highly recommended and can be arranged by appointment. Location: 65719 Hofheim am Taunus Fgodj Ah Sgrepfx Actsi Sale: Collection by buyer. Loading is possible on-site using a forklift / pallet truck. Legal note: Sale is made excluding any warranty or liability for defects.

Condition: used, Year of construction: 2019, HOMAG EDGETEQ S-380 / KDF 650 C (1650 E), year of manufacture 2019 Fsdpfx As Ah Rcaectsgi Feed rate: 8–18 m/min. Workpiece thickness up to 60 mm, depending on application limits. Edge material: rolls 0.3–3 mm, strips 0.4–12 mm. Working height 950 mm, compressed air minimum 6 bar. Equipment: Joint milling cutters (2 × 2.2 kW), QA65 gluing unit with pressure zone, BALTI hot-melt unit, trimming unit, multi-stage and profile milling cutters, profiling and glue joint trimming blade, edge trimming unit and spraying equipment. Meter readings according to the photo dated October 22, 2026: 1,780 hours of processing time, 5,495 hours of feed time. The EDGETEQ is offered separately. Location: Basel area, Switzerland. Inspection by appointment only. Price upon request.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: CE marking, documentation/manual, Holzher Auriga 1308 XL Suitable for polyurethane coatings. Fgodpo Ah Hi Isfx Actei