MPP Tehnika

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 41 mbar, suction capacity: 16,800 m³/h, filter area: 150 m², Central dust extraction system, wood chip extractor, dust collector, self-cleaning filter, vacuum-operated, brand NESTRO. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Fsdps Ai Sdlefx Actopp Suitable for all types of dry dust in various technological processes. Bag filter, self-cleaning Nestro JET 9/5/33 2E Year of manufacture: 2007 Filtration area: 150 m2 Fan power: 30 kW Device capacity: 16,800 m3/h Maximum vacuum: 4100 Pa Filter capacity: 22,000 m3/h Complete airlock Stock number: 1119

Condition: good (used), functionality: fully functional, Dust extraction system from a former carpentry shop for sale We are selling a dust extraction system from a former carpentry shop. The system is currently fully installed in our office and storage areas and can be inspected and tested in operation before purchase. Known information about the system: Manufacturer: Höcker Designed for up to 12 machines All extraction points have pneumatically controlled openings The system is controlled via a central control cabinet that monitors the connected units and automatically activates the extraction as needed. Since we only took over the premises after the previous use, we unfortunately have only limited technical details about the system. However, we will gladly try to obtain further information if you have specific questions. The system can be inspected and tested on site after prior arrangement. The buyer is responsible for dismantling the system. We can offer assistance if required. Fpodps Aiuacofx Actsp If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2019, Dust extraction system Manufacturer: Felder Type: RL 350 Fpeds Aiglmjpfx Actjp Year of manufacture: 2019 Technical data Motor power: 11 kW Voltage: 400 V Frequency: 50 Hz Maximum air volume flow: 8,000 m³/h Nominal air volume flow: 6,950 m³/h Negative pressure at 20 m/s: 2,630 Pa Dust extraction connection: 350 mm Filter area: 71 m² Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Manufacturer: P.Ries Type: 1400 A2 Year: 2004 Description: The very compact size allows it to be easily integrated into machines, production systems or anywhere where space and space are limited. Motor power: 3x 220-240/380-415 V 0.75 kW 1.56 A (UL/CSA) IE3 premium efficiency Volume: 141 m3 / h Vacuum performance: 140 mbar Waste container: 8 liters Filter, surface, quality: Cartridge filter 0.6-1.4 m 2 , BGIA/IFA class M, antistatic Filter rinsing: Optional Filter monitoring: with optional differential pressure gauge (green/red) Dimensions: width 400 x 430 x 550 mm Housing, color: Stable steel structure in RAL 7035 color, light gray powder-coated, antistatic Options: Motor protection unit with on/off switch Pipe/pipe connection Ø30, 32, 40 mm Fpodpfx Acs Aiduqstjp Type 1104 A2 for 60 Hz electrical supply Stainless steel version or other RAL color Explosion protection according to the 94/9/EC and 2014/34/EU ATEX directives Absolute filter HEPA H13/14, Activated carbon filter

Condition: used, Year of construction: 2022, machine/vehicle number: .35.12.113.22, Dust extraction system FELDER RL 350, 2022. Fpodpfx Ace Aibqhstjp

Condition: used, Year of construction: 2021, Reliable ELBH TSP-25 NT hot-water biomass boiler designed for efficient combustion of wood fuel. Manufactured in 2021, the boiler is suitable for sawmills, timber drying plants, biomass heating systems, and industrial facilities requiring a dependable renewable heat source. Key Specifications Manufacturer: ELBH-CZ Model: TSP-25 NT Thermal output: 266 kW Water volume: 750 l Heating surface: 26 m² Maximum operating temperature: 95 °C Operating pressure: 0.3 MPa Maximum allowable pressure: 0.5 MPa Fuel: Wood biomass Electrical power consumption: 3.5 kW Fpedo Ah Sx Rjpfx Actop Dimensions: 2315 × 1800 × 1150 mm Weight: 5,000 kg Year of manufacture: 2021 Suitable as a heat source for timber drying chambers, industrial heating systems, wood-processing plants, and biomass energy applications.

Condition: used, Year of construction: 2002, Extraction system Manufacturer: Schuko Type: Vacumat 160 Year of manufacture: 2002 Technical data - V Nominal flow rate: 1950 m3/h - V min.: 1441 m3/h - Motor power: 2.2 kW - Nominal speed: 2850 RPM - Nominal current: 4.6 A - Nominal operating voltage: 400 V Fedj Ah E Rwepfx Actepp - Frequency: 50 Hz - Fan motor: 3-phase 400 V, 2.2 kW, 50 Hz, 2800 RPM Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2016, AL-KO POWER UNIT 300 incl. briquetting press Alko Type 300P-BP 30-50 Suction nozzle 300 mm Motor rated power 7.5 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow rate 6,000 m3/h Rated volume flow rate* 5,089 m3/h Fpedpfxo Ahw T De Actjp Negative pressure at rated volume 2,587 Pa Filter area 30 m2 Pre-separator integrated Extinguishing system integrated Control for 8 machines Chip collection volume (net/gross) briquetting press 900 liters Sound pressure level 71 dB(A) Dimensions (L / W / H) in mm 3,000 x 1,361 x 2,817 Briquet diameter 50 mm Net weight without packaging 1,570 Absolutely new condition, from a school workshop

Condition: used, Year of construction: 2006, functionality: unexamined, volume flow: 25,300 m³/h, filter area: 123 m², actuation type: electric, total height: 4,600 mm, total length: 5,540 mm, total width: 1,800 mm, Equipment: CE marking, In operation at our facility until week 31 of 2026. For sale after the consolidation of several smaller filters into a single large filter housing. Material extracted: wood chips and dust. Filter hoses replaced in 2020. Documented maintenance: 2012, 2020, 2024. Scope of sale: - 1 filter housing, Rippert RDSN 7; L 5.6 x W 1.8 x H 4.6 m - 1 cyclone separator including steel frame; L 2.4 x W 2.4 x H 8 m Fpodpfs Ahhhwox Actep - 2 raw air fans - Optional, associated pipelines, at no extra charge - Optional, 2 matching radial impellers as spare parts, new, balanced, manufactured in 2025, plus €2,500 net Sale includes foundation. Inspection possible. Subject to prior sale.

Condition: used, functionality: fully functional, Dust extraction nozzle for a four-sided planer Fedpfx Ae Agrzlectepp Number of connections: 9 Connection diameter: 140 mm Main duct diameter: 450 mm This nozzle is compatible with a Weinig Hydromat planer:

Condition: excellent (used), Year of construction: 2022, NESTRO dust extraction system Capacity: approx. 20,000 m³/h Filter area: 175 m² Vacuum fan: 22 kW The filter is equipped with an automatic filter bag cleaning system, an air return system, control system, and fire and explosion protection. Technical data: Manufacturer: NESTRO / Netecs Type: NFP 9/9/30 Year of manufacture: 2022 Production number: 22/6014 System capacity: approx. 20,000 m³/h Max. filter capacity: approx. 22,000 m³/h Vacuum fan: 22 kW Filter area: 175 m² Number of filter bags: 81 pcs. Bag dimensions: DN 230 × 3000 mm Max. filter vacuum: 4000 Pa Max. dust moisture: 15% Filter cleaning: automatic, vibration-based Cleaning without compressed air Filter emptying: rotary airlock Construction: galvanized sheet metal, 2 mm thick Noise level: < 80 dB(A) Filter voltage: 400 V Frequency: 50 Hz Filter weight: 3612 kg Variable frequency drive: 22 kW Equipment and safety: automatic vibration-based filter bag cleaning antistatic filter fabric, category C dry extinguishing system certified explosion-proof flaps/panels design compliant with ATEX requirements fire damper on the air return adjustable air return damper 0–100% control of fan, rotary airlock, cleaning, and safety features pressure sensor and automatic capacity adjustment via a variable frequency drive Fodpfe Af Utzex Actjpp ladder and service platform TECHNICAL CONDITION: PERFECT!!!!

Condition: excellent (used), Year of construction: 2011, Clean air filter with rotary valve airlock Integrated pre-separator Negative pressure monitoring Fire extinguishing system with powder fire extinguisher PLC control Machine recognition and damper control for 8 machines/dampers Filter material with BIA test, category “M” Chip disposal via rotary valve airlock Maintenance opening for raw gas area Motor power: 9.2 kW / 3-phase / 400 V / 50 Hz Intake nozzle: DN 300 mm Nominal volume flow: 4810 m3/h Maximum volume flow: 6000 m3/h Negative pressure at Vn: 2100 Pa Filter area: 40 m2 Residual dust content: < 0.1 mg/m2 - H3 Sound pressure level: 81 dB(A) Compressed air consumption: 60 Nl/pulse Compressed air connection: 6 bar Fpsdpfxe Adrxbj Actep Dimensions L x W x H = 3015 x 970 x 2,280 Weight: 802 kg Note regarding used machines: • Errors and omissions in technical specifications and prior sale are reserved. • Stated prices are ex works, excluding loading! • The machine has been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Fjdpfs Aba Rgox Actspp Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: excellent (used), Year of construction: 1999, 36 filter bags dust extraction duct height: 7.5 m external dimensions of the dust extraction duct: 270 x 150 cm turbine power: 11 kW fire extinguisher automatic hydraulic sawdust feeding system for the briquetting machine bag shaking mechanism briquetting machine motor power: 4 kW Fpedpfez Spuwjx Actjp year: 1999

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. Fpjdpfxez R Sulo Actsp The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available.

Condition: used, Year of construction: 2018, Working width: 2,500mm, air flow rate: 1,600m³/h, motor power: 1.5kW. Equipment: integrated under-table extraction system, radial fan with spark protection, filter elements below the wooden grate, pneumatic filter cleaning, direct air recirculation, wooden grate with defined gap spacing, galvanized and painted sheet steel, integrated motor protection switch and compressed air supply, CE marking. On-site inspection is possible. Fodpfx Acoz R A Nrjtjpp

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total width: 5,000 mm, Silo for sawdust. Fedpfx Aoz Ranfoctjpp

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Filter capacity 14,5 m² Number of dust containers 3 St. Weight ca. 500 kg 200 mm Fsdpfx Asz I Uc Dectjpp

Condition: new, Year of construction: 2026, Airflow capacity 15,000 m³/h Fpsdpfx Aoz I Sdloctop Motor power 18.5 kW (25 HP), 3,000 rpm Air velocity 40 m/s Filter dimensions Ø160 x 940 mm Number of filters 117 units Filtration area 59 m² Chip collection 2x big bag (total: 2,500 liters) Inlet diameter Ø400 mm Dimensions 1,670 x 4,000 x 3,630 mm Weight 1,150 kg Operating temperature -20°C to 40°C

Condition: new, Year of construction: 2026, Airflow capacity 11,300 m³/h Motor power 11 kW (15 HP), 3000 rpm Air velocity 40 m/s Filter dimensions Ø160 x 940 mm Number of filters 60 pcs Filtration area 30 m² Chip collection 2x 1250-liter big-bag (total: 2500 liters) Inlet diameter Ø355 mm Dimensions 1200 x 3310 x 3560 mm Fsdpfoz I Sc Usx Actspp Weight 820 kg Operating temperature -20°C to 40°C

Condition: new, Year of construction: 2026, Capacity 8,900 m³/h Motor power 7.5 kW (10 HP), 3,000 rpm Air velocity 32 m/s Filter dimensions Ø160 x 940 mm Number of filters 42 units Filtration area 21 m² Chip collection Big bag (1,250 liters) Fpsdpez I Scuofx Actop Inlet diameter Ø300 mm Dimensions 1,210 x 2,550 x 3,520 mm Weight 540 kg Operating temperature -20°C to 40°C

Condition: ready for operation (used), Dust extraction unit complete with rotary valve, extraction fan with variable frequency control, motorized filter cleaning (shaker), electrical cabinet, Inlet: 400 mm Filter dimensions: 240 x 115 x 360 cm Capacity: approx. 10,000–12,000 m³/h Fpsdpoz Iz Hvjfx Actsp Fan motor: 15 kW, 400 V, 50 Hz, 3-phase Stock no.: 2002963BXA

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose extraction and filtration system, built in 2006, from a wood processing company. The system is designed as a screw filter and includes a complete extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filtration system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge, there is a suitable container with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the extraction control system and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw and four cleaning groups, as well as a Schneider-Electric frequency converter for the extraction fan. Technical data Aagaard / Finnrose industrial extraction system / screw filter Year of construction: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for extraction control and heat recovery Frequency converter for main fan Heat recovery / return air system available Fpsdpfx Acjz Ik Atetep 6 m³ container on a mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available upon agreement Dimensions Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport and any customs clearance will be carried out entirely by the buyer at his own expense and responsibility. All necessary skilled personnel, lifting equipment, cranes and means of transport must be organized by the buyer. Inspection possible by appointment. Sale ex works in its current condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 19,500.00 EUR Price net, any statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. Fjdpfxsz Ikzpe Actjpp The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Condition: used, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,850 m³/h, intake manifold diameter: 160 mm, filter area: 8.25 m², total height: 1,950 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 3273 Extraction unit / dust extractor AL-KO Mobil-Jet 160 Used Dust extractor for extracting wood dust and chips Motor power 2.2 kW Nominal air flow rate 1850 m3/h Minimum air flow rate 1448 m3/h Extraction inlet Ø 160 mm Negative pressure 2120 Pa Filter area 8.25 m2 Air filter category G Pneumatic filter cleaning AL-KO OPTI JET Compressed air connection 8.5 bar Chip collection container approx. 320 l Base frame without wheels Suitable for wood dust separation, residual dust content class 2 (H2), max. residual dust content 0.2 mg/m3 Type 1 (B1), suitable for extracting combustible dust in Zone 11 BG-tested, GS-tested CE marking Fpodpfxez Ibgij Actep Suitable for indoor use Electrical connection 400 V / 50 Hz, three-phase Ready to plug in, including power cable and 16 A plug Transport dimensions approx. 1700 x 800 x 1950 mm LWH Weight approx. 200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location