Blindhammer GmbH

Condition: used, first registration: 09/2019, Year of construction: 2019, STAS 3 - Full Aluminum Axle - Grain Tipping Semi-Trailer SHAKER / VIBRATOR!!! • ABS • EBS • WABCO SmartBoard • ALCOA rims • 3 x air-suspended 9-ton JOST / SAF axles • Lifting/lowering system • Lift axle (1st axle) • Gross Vehicle Weight: 39,000 kg • Tare weight: 5,710 kg • Payload: 33,290 kg • Tires: 385 / 65 R 22.5 • Tire tread: 80 - 90%! • Platform • Roll tarp • Work lights • Pneumatic rear door release • Automatic / pneumatic venting during tipping Ndedsz Ezu Iepfx Aphsb • Overall length of the trailer: 10,227 mm • Volume: 55 cubic meters - 1st owner - German trailer - Valid inspection certificate (HU / TÜV): new! Errors and prior sale excepted! = Further information = Tare weight: 5,710 kg

Condition: excellent (used), For sale: a Rapid 1514 shredding mill from the Range 15 series. The machine has been inspected and is in working order. It is suitable for shredding appropriately selected materials, including plastic waste. The unit features a feed hopper, a cutting chamber with blades, an electric motor, and a control panel with an emergency stop switch. The photos also show the interior of the working chamber. Data from the nameplate: - Manufacturer: Maskin AB Rapid, Sweden - Type: 1514 - Series: Range 15 Ndedpfx Apsz Ezuusheb - Year of manufacture: 1994 - Machine number: 260319 The machine is used and shows signs of wear, which can be seen in the photos. The condition and scope of equipment are shown in the photographs.

Condition: excellent (used), For sale: a fully functional Müller Maschinen SM 152 shredding mill. The machine is equipped with a hopper, a chamber with blades, a screen, and a control panel with an emergency stop switch. The visual condition and equipment are shown in the photos. Data from the nameplate: - Manufacturer: Müller Maschinen GmbH, Germany - Type: SM 152 - Year of manufacture: 2003 - Power supply: 400 V, 50 Hz - Power: 2.2 kW - Current: 5.2 A - Protection rating: IP54 Njdpfx Apoz Ezt Rehjdb - Machine number: 15203023

Condition: repair required (used), Year of construction: 2000, functionality: not functional, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, overall weight: 1,100 kg, Equipment: documentation/manual, HOFMANN table milling machine, type TF1200, with a sliding carriage on the side and an extendable table support, with electric height adjustment. Unfortunately, the programs on the control unit cannot be saved. Otherwise, the machine is in very good condition. Ndedsz Eztkspfx Aphob

Condition: excellent (used), For sale: a BOFA ES400i industrial extraction unit, manufactured by BOFA International for Markem-Imaje. This unit is designed to extract and filter contaminants generated during the operation of marking devices, including lasers. Nodpfx Apjz Ezr Tshedb The metal housing is equipped with wheels, a control panel, and connectors for connecting the extraction system. The interior and visual condition of the unit are shown in the photos. Data from the nameplate: - Model: ES400i - Part number: 0695914 - Power supply: 230 V, 50/60 Hz, 6.20 A - Date of manufacture: 03/2009 - Serial number: 03/09/ES400i-1111

Condition: used, mileage: 726,676 km, power: 220 kW (299.12 HP), first registration: 01/2014, fuel type: diesel, gearing type: automatic, emission class: euro6, color: red, brakes: retarder, total length: 12,130 mm, total width: 2,550 mm, total height: 3,350 mm, Year of construction: 2014, Equipment: ABS, air conditioning, fog lights, power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - Climate control - EBS - Heater - Hydraulic power steering - Reverse camera - Sun visor - Tachograph = More information = Engine capacity: 7.698 cc Make of engine: Mercedes Benz Njdpfx Aez Ezrysphsdb Tyre tread remainder on axle 1: 40% Availability: in stock

Condition: used, Year of construction: 2006, turning diameter 540 mm turning length 1020 mm control FANUC 18 i-TB bar diameter 65 mm travel -x axis 555 / 185 mm travel -y axis 160 mm travel -z axis 1095 mm travel -z axis (sub spindle) 1065 mm spindle speed: 5000 / 5000 1/min spindle bore 76 / 76 mm C-Axis 360 x 0,001°/360 x 0,001° turret head BMT 65P / 12 Pos. milling spindle turning speeds 10000 U/min Driven Tools 4.000 U/min b-axis 240 ° rapid traverse X-axis 24 m/min Ndsdpfx Ajz Ezrmepheb rapid traverse Z-axis 24 m/min drive capacity - spindle motor 22 / 22 kW voltage 400 V toolpiece magazine: chain magazine 40 Pos. tool taper HSK-A 63 milling drive 15 kW driven Tools 5,5 kW total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,30 x 2,30 x 2,90 m

Condition: excellent (used), For sale: BOFA ES500i+ industrial fume and dust extraction unit, designed for use with laser equipment. The unit has a metal housing with wheels, a control panel with a display, and access to the filter section. Data from the nameplate: Ndodpfx Aoz Ezrasphob - Model: ES500i+ - Part number: 10069037 - Power supply: 230 V, 50 Hz, 10 A - Year of manufacture: 2017 The photo shows the display indicating 4999 operating hours. The visual condition and components of the unit are shown in the photos.

Condition: excellent (used), Almost new, used for only 62 hours. Nodpsz Ezq Nefx Aphodb

Condition: good (used), Year of construction: 2014, operating hours: 4,413 h, mast type: telescopic, fuel type: hybrid, Drivetrain Drive: Track Weights Empty weight: 4.300 kg Functional Lifting capacity: 200 kg Ndsdpjz Ezqvefx Aphjb Working height: 3.000 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Max. horizontal reach: 1570 m Transport dimensions (LxWxH): 7,2/1,58/1,98 Additional information Please contact Tobias Mayr for more information

Condition: excellent (used), mileage: 219,339 km, power: 96 kW (130.52 HP), first registration: 07/2017, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, Year of construction: 2017, Cab: single Engine capacity: 2.953 cc Empty weight: 3.230 kg Carrying capacity: 270 kg GVW: 3.500 kg Technical condition: very good Visual appearance: very good Registration number: 2EQS774 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Ndodoz Ezqiepfx Aphjb If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 2006 Mitsubishi D 16 Max, a 4-unit single web offset press with a 22.750” (578 mm) cutoff and 38” web width, featuring heat-set capabilities. Semi-automatic plate changers with a plate positioning system for all 4 printing units. Folder type: Combination folder with a single cutter and digest fold. Ndjdez Ezqcopfx Aphjb Mitsubishi Diamond 16 pinless combination folder with a single cutter and digest fold, capable of producing tabloid, magazine, and digest-folded products. Cutoff: 578 mm.

Condition: used, For export only! Ndedoz Ezp Ejpfx Aphjb G&J ML550 film processor with daylight cassette.

Condition: excellent (used), Year of construction: 2008, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM Ndjdpsz Ezprefx Aphjb CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING Ndsdpfxez Ezpfo Aphob SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 Nodpfjz Ezn Uex Aphsdb ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Ndodpfx Apjz Eznzohjb Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM Nsdpfjz Eznuox Aphsdb SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Ndsdpsz Eznhofx Aphob Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: reconditioned (used), LEADERMAC THUNDERMAC 923T SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (22 KW) - Ndjdpoz Eznbsfx Aphjb RIGHT (15 KW) - LEFT (15 KW) - RIGHT (15 KW) - LEFT (15 KW) - TOP (22 KW) - BOTTOM (22 KW), TOP (22 KW) - BOTTOM (22 KW). WORKING WIDTH: 230 (245) MM, HEIGHT: 160 MM. MAX FEED SPEED 80M/MIN (POSSIBLE TO INCREASE TO 150M/MIN) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. Ndedpfoz Ezm Rjx Apheb -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 profile grinder Specification as follows Weinig Rondamat 960 standard arbor 50mm Nedpfx Ajz Ezm Dephedb High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. With diamond grinding wheels included. Without grinding wheel dressing unit.

Condition: excellent (used), first registration: 06/2018, color: other, Year of construction: 2018, Superstructure Year of manufacture: 2018 = More information = Empty weight: 6.630 kg Nedpfx Ajz Ezmkjphsdb Carrying capacity: 23.370 kg GVW: 30.000 kg Technical condition: very good Visual appearance: very good Registration number: QAKP268 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2000, loading space length: 18,100 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 18,100 mm, total width: 2,500 mm, total height: 900 mm, color: other, Year of construction: 2000, Equipment: crane, Superstructure Year of manufacture: 2009 Crane Number of hydraulic extensions: 5 Remote control: ✓ Rotator: ✓ Meter capacity: 15 m Capacity kilo: 5700 kg = More information = Axle configuration Rear axle 1: Double wheels; Max. axle load: 9000 kg; Steering Rear axle 2: Double wheels; Max. axle load: 9000 kg; Steering Rear axle 3: Double wheels; Max. axle load: 9000 kg; Steering Weights Empty weight: 9.950 kg Ndodjz Ezl Hjpfx Aphsb Carrying capacity: 29.050 kg GVW: 39.000 kg Functional Crane: PALFINGER 17502, year of manufacture 2009, behind the cab Make of bodywork: PALFINGER 17502 Height of cargo floor: 90 cm Condition Technical condition: very good Visual appearance: very good Identification Registration number: OR-33-ND = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, mileage: 10 km, power: 125.03 kW (169.99 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, tire condition: 100 %, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Equipment: ABS, EBS, air conditioning, airbag, cruise control, electronic stability program (ESP), non-smoking vehicle, power assisted steering, traction control, New Renault Master chassis, L3 2.0 170 hp + insulated body Standard equipment: • Option: socket on the B-pillar • Tire pressure monitoring system • Rain and light sensor • Steel underrun protection • “Wide View” interior mirror • Full-size spare wheel • Standard tires • Lane keeping assist Nodpsz Ezltjfx Aphodb • EMRD3 approval criterion • LED low beam and daytime running lights • RCall system • Rear parking sensors • Driver fatigue warning • Traffic sign recognition • Emergency braking assist • Driver airbag • Side marker lights • Central locking • ABS • Cruise control with speed limiter • Wireless smartphone charger • 10-inch “OpenR Link” multimedia system with wireless smartphone mirroring • Manually operated air conditioning • Electrically adjustable, heated, and manually folding exterior mirrors • Height-adjustable seatbelt • Folding key • Two-level adjustable plastic steering wheel • Interior mirror • Electrically operated front windows, including pulse function • Driver’s seat with armrest and lumbar support • 2-seater “Mobile Office” bench seat with storage compartment • Cabin lighting • 12V socket in the cabin • Extendable passenger-side storage compartment • Trim of the partition to the driver's cabin with carpeting • Lockable storage compartment in the dashboard • Analog driver displays with 3.5-inch TFT display (monochrome) ENGINE • Engine type: Blue dCi 170 • Displacement (cm³): 1998 • Number of cylinders: 4 • Number of valves: 16 • Maximum power kW (hp): 125 (170) • Maximum torque (Nm): 380 – 1500 • Fuel type: Diesel • Emission standard: EURO VIe Insulated body • Internal dimensions: 4.20 x 2.10 x 2.10 • Intermediate frame made of cold-formed steel profiles, hot-dip galvanized • Walls and roof of the body (40 mm thick, RTM process) consist of a 3-layer panel made of high-quality laminate, glass fiber reinforced using polyester resin, designed as sandwich panels with insulation. • Interior walls coated with reinforced AT laminate • Front wall and roof prepared for the installation of a selected refrigeration unit • Insulated floor, with an anti-slip layer • Aluminum exterior and interior corner profiles • Two-leaf rear door, opening 270°, with exterior locks • Side doors of the body • Door handles, fittings, locks, and the frame of the rear door made of stainless steel. • Plastic wheel arches, equipped with mud flaps. • One LED light • A set of cargo securing rails • Roof spoiler • 2 drain openings Net price for the complete vehicle: 43,900.00 EUR Optional equipment: ➢ Rear view camera: 350.00 EUR ➢ Carrier Citimax 350 L.A. refrigeration unit: 5,550.00 EUR (Power supply exclusively via the vehicle engine and heating with hot gas) ➢ Carrier Xarios 300 refrigeration unit: 7,600.00 EUR (Power supply via the vehicle engine and the 220-V power grid) ➢ Carrier Xarios 350 unit: 8,800.00 EUR (Power supply via the vehicle engine and the 220-V power grid)