DlBi

Condition: good (used), Year of construction: 2010, operating hours: 85,410 h, power: 15 kW (20.39 HP), Screw compressor Manufacturer: Atlas Copco Type: GA 15P Year of manufacture: 2010 Operating pressure: max. 9.8 bar Volume flow: 2.39 m³/min Power: 15 kW Hjdpfx Aszu Aw Ejh Eonr Operating hours under load: approx. 85,410 h Weight: 500 kg Includes refrigerant dryer.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Siemens 840D control system, Hnjdpfxezu Awxo Ah Esr two turrets, all stations are powered, counter spindle, spindle bore 60mm, chip conveyor, FMB magazine loader, fire extinguishing system (as the machine operates with cutting fluid), extensive accessories.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Hnedezu Awrepfx Ah Eer Spindle 4 (Left): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing

Condition: used, Year of construction: 1998, functionality: fully functional, The used AVM ANGELINI DG13 2-axis CNC lathe is a medium to large-sized, 2-axis numerically controlled lathe with an inclined bed, featuring a center distance of 850mm, an ASA 8” spindle nose, and a maximum bar capacity of 90mm. It was manufactured in 1998 (installed in 2000), complies with “CE” standards, and is equipped with a FANUC 0-T CNC control. It features a 315mm hydraulic chuck, a 26kW spindle motor, a 12-position automatic tool changer turret (with corresponding tool holders), and is complete with a tailstock, a chip conveyor, manuals, and a “CE” certificate. Hnedpfxozu Awfo Ah Eer

Condition: excellent (used), Year of construction: 2017, Uncompromised performance and precision: The G3 digital cutting system is based on the most flexible, adaptable, and easily expandable machine concept on the market. Operating hours 2.700 Tools Hnsdpjzu Av Usfx Ah Eer Camera New PC - touch screen UCT KCT EOT-250 CTT1 CTT2 VCT Router 1Kw Diverse Creasing wheels Diverse perforating knives Belt replaced in 2025 Zund Cut Center updated 2026 Vacum pump replaced in 2026 In production, demo possible upon request

Year of construction: 2016, condition: excellent (used), Manufacturer Hnedpfszu Av Isx Ah Esr DREHER Type 1676 A Refurbishment No. 2016 A-12/615 Machine Type Feeder/Strip Straightening Machine Number of straightening rollers: 7 Straightening roller diameter: 80 mm Strip width: 300 mm Material thickness: 0.5 - 4.5 mm Feed speed: in the range of up to 30 m/min Straightening adjustment: manual/mechanical Position indicator: 3 visible mechanical indicators

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry portal for coil system with Trumpf TCF 1 laser + GSW AG coil winder MHR 2.5 / 1250 + strip straightening machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 robot The system will remain in operation until calendar week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. output power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability in relation to rated power: ±2 % Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Coil winder MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Strip straightening machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rollers: 7 Number of tension rollers: 2 Roller diameter: 60 mm Straightening roller spacing: 130 mm Speed: approx. 15 m/min Working height above floor: approx. 1,000 mm Drive type: servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positional repeatability: ±0.06 mm Hnodpozu Avzefx Ah Esr Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist swivel): ±200° B-axis (wrist bend): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s

Condition: excellent (used), mileage: 240,000 km, power: 265 kW (360.30 HP), first registration: 12/2013, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,000 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 7,020 mm, loading space width: 2,500 mm, loading space height: 300 mm, Year of construction: 2013, Equipment: ABS, AdBlue, EBS, air conditioning, crane, cruise control, differential lock, electric window regulation, power assisted steering, power mirror, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Differential lock - Speed limiter - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Reversing camera - Sun visor - Tool box - Power take-off (PTO) - Central lubrication system - Tow hitch = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 8,710 cc Axle Configuration Front axle: Max. axle load: 7500 kg; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle 1: Dual tires; Differential lock; Max. axle load: 11,500 kg; Tire tread depth left (inner): 40%; Tire tread depth left (outer): 40%; Tire tread depth right (inner): 40%; Tire tread depth right (outer): 40%; Suspension: Air suspension Rear axle 2: Lift axle; Max. axle load: 7500 kg; Steerable; Tire tread depth left: 90%; Tire tread depth right: 90%; Suspension: Air suspension Weights Unladen weight: 13,120 kg Payload: 13,880 kg GVW: 27,000 kg Hnsdpfxozu Avns Ah Eor Functional Lifting capacity: 13,000 kg Crane: PALFINKER, behind the cab Maintenance, History, and Condition APK (Technical Inspection): Valid until 12/2026 Technical condition: very good Optical condition: very good Warranty Warranty: WITH STEERABLE AXLE

Condition: used, Year of construction: 2008, functionality: fully functional, FEZER Vacuum Lifter with Wall-Mounted Jib Crane for sale! Manufacturer: FEZER (Albert Fezer Maschinenfabrik GmbH), Germany Type: Vacuum lifting system Operating principle: Vacuum gripping and lifting using a vacuum generator and vacuum lift hose Hodpozu Avhefx Ah Eonr Material: Ergonomic handling of wood panels, MDF, particle board, plywood, plastic sheets, metal sheets and similar flat materials. Technical Features Carrying capacity: 60 kg Boom length (reach): approx. 5.10 m Vacuum generator Vacuum lift hose Ergonomic one-hand control unit Interchangeable suction feet Wall-mounted jib crane Manual crane travel Smooth and precise handling of flat workpieces CE compliant

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel Hnsdszu Avbjpfx Ah Esr • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Condition: used, Year of construction: 1995, functionality: fully functional, JOSTING EFS 2300 L is a heavy-duty single-knife veneer guillotine designed for accurate cutting of veneer sheets and veneer packs. The machine has been modernized and upgraded with an electronic positioning and control system, improving cutting accuracy, repeatability and ease of operation. Manufacturer: JOSTING Model: EFS 2300 L Machine type: Veneer Jointing Guillotine / Veneer Pack Cutting Machine Hodpfxezu Au Dj Ah Ejnr Cutting length: 2,300 mm Maximum insertion height: 80 mm Parallel fence range: approx. 20–720 mm* Pressure bar: Hydraulic cylinder with two pressure stages Cutter bar drive: Brake motor, gearbox and crank drive Parallel fence: Motor-driven positioning system Connected load: approx. 7.7 kW Machine footprint with parallel fence: approx. 3,640 × 1,700 mm Machine height: approx. 1,700 mm Net weight: approx. 3,000 kg Modernization INCLUDES: Digital LCD display Electronic measurement display in millimetres Numeric keypad for direct entry of required cutting dimensions Automatic positioning of the parallel back fence Programmable cutting dimensions Cutting sequence / step programming functions Electronic adjustment and positioning controls Start/Stop control directly from the operator panel Manual fine-adjustment controls Centralized operator interface combining machine and positioning functions

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, wire diameter (max.): 10 mm, The BLM GROUP E-FLEX is a fully automatic, all-electric, single-head CNC wire-bending machine designed to produce complex 3D wire parts directly from a coil. Key Capabilities Full Automation: It processes wire directly from a spool, seamlessly performing inline operations like straightening, cutting, chamfering, and bending.Dual-Direction Bending: The bending head features a double turret capable of rotating both clockwise and counter-clockwise. This layout allows it to use multiple bending technologies simultaneously to avoid impossible geometries. Continuous Operation: Engineered with a small physical footprint and all-electric axes, it is optimized for non-stop, 24/7 industrial manufacturing. Technical Specifications Hnodpfxjzu Auwo Ah Eor The system is built to handle heavy production environments with the following configurations: Parameter Specification Bending CapacityUp to Ø 8 mm (with Wire R=900 N/mm²) or Ø 10 mm (with Wire R=500 N/mm²)Control System5 CNC axes Bending Angle0.1° to 240°Bending Radius 0.5 mm to Infinite Coiler Capacity Up to 1,500 kg Power Consumption22 kW maximum installed power (8 kW average drawn power)Machine Weight2,400 kg (5,291 lbs)

Condition: used, Year of construction: 2019, functionality: fully functional, For joining veneers approximately 0.3–3.0 mm thick. The machine applies a special glue thread in a zigzag pattern, providing strong and tight joints even with wavy veneers. During pressing, the glue thread is embedded into the veneer, eliminating the need for additional sanding. Technical data: Throat depth: 1250 mm Feed speeds: 15 / 30 / 45 / 60 m/min Veneer thickness: 0.3–3.0 mm Voltage: 400 V, 50 Hz, 3-phase Compressed air connection: R 1/4" Air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Hnsdpfxezu Auqs Ah Ejr

Condition: excellent (used), Year of construction: 2017, AGFA Anapurna H2050i LED VERSATILITY. PRODUCTIVITY. QUALITY. A powerful 2.05 m hybrid UV LED printer for high-quality graphics production. Hjdszu Audopfx Ah Eonr One printhead needs replacement Only 975 hours printed, aqcuired from show room Under production, demo possible 2.05 m print width Up to 104 m²/h UV LED curing technology Hybrid: rigid + flexible media Up to 3.2 m rigid-media length Up to 45 mm substrate thickness CMYK + Light Cyan + Light Magenta + White Up to 720 × 1,400 dpi Konica Minolta KM1024i printheads White ink for high-impact applications For further technical details refer to enclosed brochure

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Complete with manuals and CE certificate. Hnedpfx Ahezu At To Ejr

Condition: used, Year of construction: 2006, Contura Matic T2 contour measuring machine, manufactured in 2006. Hedpfxozu At He Ah Esnr

Condition: used, mileage: 980,300 km, power: 355 kW (482.67 HP), first registration: 08/2018, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,150 mm, total width: 2,550 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, parking air conditioner, parking heater, second fuel tank, spoiler, = Additional Options and Accessories = - 4x2 - Aluminum fuel tank - Roof spoiler - Digital tachograph - Air suspension - Radio/CD player - Sleeper cab - Side skirts - Sun visor = Additional Information = Cab: SUPER SPACECAB Front axle: Tire size: 385/65 R 22.5; Steered; Tire tread depth left: 45%; Tire tread depth right: 45%; Suspension: Leaf spring suspension Hedpfxozu Attj Ah Ejnr Rear axle: Tire size: 315/70 R 22.5; Dual tires; Tire tread depth left inner: 25%; Tire tread depth left outer: 25%; Tire tread depth right inner: 25%; Tire tread depth right outer: 25%; Reduction: single reduction; Suspension: Air suspension Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 8,329 kg Payload: 12,171 kg GVW: 20,500 kg Damage: None

Condition: used, mileage: 847,700 km, power: 355 kW (482.67 HP), first registration: 09/2017, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, parking air conditioner, parking heater, spoiler, = Additional Options and Accessories = - 4x2 - Aluminum fuel tank - Roof spoiler - Digital tachograph - Air suspension - PTO - Radio/CD player - Sleeper cab - Side skirts - Sun visor = Additional Information = General Information Hnjdpszu Atmsfx Ah Ejr Cab: Spacecab License plate: 52-BRK-2 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Tire size: 315/70 R 22.5 Front axle: Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 7,862 kg Payload: 11,638 kg GVWR: 19,500 kg Condition Damage: none

Condition: used, Year of construction: 2014, Band saw, Jäspa, year of manufacture 2014. Hnsdpfx Aozu Atgeh Eer

Condition: excellent (used), Year of construction: 2004, PALS Label applicator (Top apply) and conveyor - ready to operate Hnsdpfxozu Atae Ah Eor

Condition: used, Year of construction: 2016, Tool presetting machine, DMG Mori, manufactured in 2016. Hjdpfx Ahozu Ar Ns Esnr

Condition: used, Year of construction: 1999, Hydraulic press Dunkes HEZ 100-40, year of manufacture 1999 Hydraulic press Dunkes HS2 63, year of manufacture 1999 Eccentric press Ebu 75, year of manufacture 1985 Hnedpfxozu Arve Ah Esr

Condition: not inspected (used), machine/vehicle number: AAC3021001514, No minimum price – guaranteed sale to the highest bidder! For sale is a digital color laser printing machine from Konica Minolta, model AccurioPress C3070. TECHNICAL DETAILS Manufacturer/Model: Konica Minolta AccurioPress C3070 Equipment Class: Digital Color Printing System / Production Printing System Serial Number: AAC3021001514 Printing Technology: Color Laser Maximum Format: DIN A3 Hnodpjzu Arijfx Ah Esr Page Counter: 1,184,396 pages Network: Yes WLAN: Yes Duplex Printing: No MACHINE DETAILS The machine is offered expressly in an untested condition. A function test is not currently possible due to the missing hard drives or SSDs. This also applies to the printer controller. Therefore, the technical functionality of the main unit and the accessory components could not be confirmed. Hard Drives / SSDs: Missing Function Test: Not possible Technical Condition of Main Unit: Untested Technical Condition of Accessories: Untested Cosmetic Condition of Main Unit: Moderate signs of wear in the upper and front area Paper tray drawer: Opening or handle torn off Cosmetic Condition of PF-602: Moderate signs of wear in the upper and front area EQUIPMENT Konica Minolta AccurioPress C3070 Printer Controller Serial Number: A00043842 Finisher FS-532 Serial Number: 75710 Paper Feeder PF-602 Serial Number: 75711 Booklet/Finishing Unit SD-506 Serial Number: 75712 RU-518 Serial Number: 75713 Please note the following: The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made excluding any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, mileage: 783,798 km, power: 330 kW (448.67 HP), first registration: 03/2022, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 5,990 mm, total width: 2,530 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2022, Equipment: air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, power mirror, = Additional options and accessories = - Air compressor 1100 ltr - Air horn - Alcoa Dura Bright rims - Beacon(s) - DAB + Receiver - Drivers seat comfort 5 - Front electric windows - Locking differential - Preparation OBU - Remote central locking - Sleeping cabin - Sun visor - Volvo engine brake plus - Work lamp(s) = More information = Hnjdpfx Ahozu Arco Esr General information Number of doors: 2 Registration number: 47-BSP-1 Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Front axle: Tyre size: 385/65 R22.5; Alloy wheels; Max. axle load: 9000 kg; Tyre profile left: 75%; Tyre profile right: 75%; Suspension: leaf suspension Rear axle: Tyre size: 315/80 R22.5; Double wheels; Alloy wheels; Max. axle load: 11500 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Suspension: air suspension Engine type: Renault Trucks Optidriver Weights Empty weight: 7.843 kg Carrying capacity: 12.657 kg GVW: 20.500 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Maintenance APK (MOT): tested until 03/2027

Condition: used, Year of construction: 2008, Surface grinding machine, Geibel & Hotz FS 840 SD, manufactured in 2008. Hnodpfszu Aq Sox Ah Esr