Plibat

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, ram adjustment: 80 mm, drop-through hole in table: 210 mm, pressing force: 63 t, working width: 1,500 mm, overall weight: 17,000 kg, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Price on request. Hodjyyppbepfx Abwok

Condition: used, Year of construction: 1987, Mechanical high-performance stamping press for industrial serial production of stamped and formed parts. Hsdpfoyyccbjx Abwek Manufacturer: Müller Weingarten AG Type: HU2-315.25 Year of manufacture: 1987 Press force: 3150 kN Stroke: 300 mm Slide adjustment: 250 mm Strokes per minute: 15–90 min⁻¹ Machine weight: 100,000 kg Total weight: 107.8 t Individual weight G1: 91 t Individual weight G2: 5.4 t Individual weight G3: 2.4 t Individual weight G4 without coil: 7.5 t Individual weight G5 without coil: 1.5 t Machine motor power: approx. 92 kW Static foundation load: approx. 98.8 t Dynamic load on slide: 240 kN Dynamic load at cutting impact: 160 kN

Condition: used, pressing force: 250 t, Mechanical high-performance stamping press for series production of stamped and formed parts. Manufacturer: Müller Weingarten AG Pressing force: 2500 kN Drive type: mechanical Stroke: 160 mm Strokes per minute: 20–80 min⁻¹ Table size: 1000 x 1600 mm Strip width: 30–500 mm Max. coil diameter: 1800 mm Parts produced per day: 43,000 Number of parts: 50 Number of progressive dies: 50 Tool change time: 30 min Shift occupancy: 4 Total weight: 64 t Single weight G1: 48.5 t Single weight G2: 5.2 t Single weight G3: 2.3 t Single weight G4 without coil: 6.5 t Single weight G5 without coil: 1.5 t Machine motor power: approx. 77 kW Hsdpfx Ajyyb U Ajbwjk Total connected load of system: approx. 183 kW Static foundation load: approx. 62 t Dynamic ram load: 85 kN Dynamic cutting impact: 125 kN

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm Hedpfsyx Ii Dex Abwsk power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: excellent (used), Year of construction: 2001, Kaiser Punching Press Model: KSTU 4000-25-6P Press force: 4,000 kN Table size: 2,500 x 1,250 mm Ram surface: 2,500 x 1,100 mm Shut height: 700 mm Ram stroke: 40-250 mm Ram adjustment: 200 mm Strokes per minute: 20-100 1/min Control: Siemens S7 Required space: 4.8 x 3.2 x 4.8 m (LxWxH) Weight: 78,000 kg PBK Straightening Machine Strip width: 120 - 800 mm Strip thickness: up to 6.0 mm ARKU Decoiler Load capacity: 8,000 kg Hedpfx Absyx Eu Rewok

Condition: used, Year of construction: 1985, operating hours: 35,288 h, machine/vehicle number: 10661, total height: 2,200 mm, total width: 1,200 mm, total length: 1,700 mm, pressing force: 25 t, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a MABU 25 VP /RC, which, given its age, is in good condition. The machine is still in use in serial production and operates reliably. An inspection and test run are possible in ongoing production until the end of week 18/2026. This gives you the opportunity to personally verify the machine’s performance and functionality. Nominal force: 250 kN Stroke rate: 12⅓–500 spm Feed: MABU 120/150 Adjustable stroke: 7–62 mm Main drive: 3.7 kW Power supply: – Adjustable stroke: 7–62 mm Table dimensions: 400 x 360 mm Adjustable strip entry height: 10–140 mm Max. strip width: 35 mm Max. material thickness: 1.5 mm Machine dimensions: 2115 x 1662 x 1190 mm Weight: 2500 kg Hjdpfxjyu S Ets Abwjk "Main drive on (runtime) (Control cabinet counter)" 35,288 h A sound enclosure is optionally available for purchase.

Condition: used, Year of construction: 1995, operating hours: 42,416 h, functionality: fully functional, machine/vehicle number: 10317, total height: 3,100 mm, feed length X-axis: 120 mm, ram adjustment: 64 mm, table height: 1,250 mm, pressing force: 50 t, stroke length: 16 mm, stroke adjustment: 51 mm, clearance between the columns: 1,200 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 50 UL, a high-performance stamping press designed for precise and reliable results in series production. The machine is currently integrated into ongoing production and can therefore be viewed and tested under real operating conditions. Inspection and extensive functional testing are possible until the end of calendar week 20/2026. Thanks to continuous use, the machine is in excellent technical condition and ready for immediate operation. All maintenance and servicing work has been carried out regularly and meticulously. Technical data: Rated force: 500 kN Strokes per minute: 100-1120 spm Feeder: BBV 202/120 Adjustable stroke: 16-51 mm Die space / Clamping plate: 760-940 mm Main drive power: 22 kW Power supply: 400 V / 50 Hz Adjustable stroke: 16-51 mm Hedpfxsyu Sn Ij Abwsk Ram surface: 980 x 420 mm Table surface: 940 x 580 mm Adjustable strip entry height: 50-140 mm Max. strip width: 203 mm Max. material thickness: 2 mm Machine dimensions: 2700 x 1800 x 3100 mm Weight: 8150 kg "Main drive on (actual running time): 42,416 hours" An acoustic enclosure is available as an option.

Condition: used, Year of construction: 1994, operating hours: 28,067 h, functionality: fully functional, machine/vehicle number: 10000, total height: 3,460 mm, feed length X-axis: 200 mm, ram adjustment: 76 mm, table height: 1,200 mm, total width: 1,750 mm, total length: 1,840 mm, table length: 970 mm, table width: 910 mm, stroke length: 16 mm, stroke adjustment: 63 mm, clearance between the columns: 1,230 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 80H – a proven and powerful high-precision stamping press designed for maximum reliability and accuracy in series production. The machine is currently still in operation and can therefore be inspected and tested under real production conditions. Acceptance and trial runs are possible until calendar week 17/2026. Due to its ongoing use in production, the system is in technically flawless and fully operational condition. Regular maintenance and servicing have been carried out. Technical highlights (excerpt): Machine type: Bruderer BASTA 80H Field of application: High-precision stamping for series production Hjdpfxjyu Nipe Abwsk Condition: Technically flawless, ready for immediate use Availability: By arrangement / from CW 17/2026 A soundproof cabin is optionally available. Technical details: Nominal force: 800 kN Stroke rate: 100–1000 spm Feed unit: BBV 320/200 Adjustable stroke: 16 – 63 mm Die area / Bolster plate: 970 mm Main drive / Power: 43 kW Power supply: 380 V / 50 Hz Ram surface: 760 x 510 mm Table surface: 950 x 910 mm Adjustable strip entry height: 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: 15,550 kg

Condition: used, Year of construction: 1971, pressure 40 t stroke . mm no. of strokes . Hub/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hodpfxjyutuis Abwok If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1999, Manufacturer: Müller Weingarten Press Type: HUQ 630.40 Pressing force: 6,300 kN Table area: 4,000 x 1,600 mm Ram area: 4,000 x 1,600 mm Ram stroke: 124-400 mm Ram adjustment: 200 mm Strokes per minute: 10-60 1/min Tool change system: tool change cart Hjdpsyt Nqkofx Abwek Including transfer and ARKU strip feeding line

Condition: used, Year of construction: 1989, Make and model: Bruderer BSTA 25 EL Year of manufacture: 1989 Nominal capacity: 250 kN, 25 tons Max. number of strokes: 100/1350 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Hjdpfx Absyrf Aaowsk Press weight cca. 5000 kg.

Condition: good (used), functionality: fully functional, Double-column automatic punching press Hedpoylz Avsfx Abwek

Condition: used, Year of construction: 1977, pressure 125 t distance between columns 1150 mm stroke fix 25 mm no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 1150 x 1000 mm Hedpfxoylzw Ho Abwek hole in the table 900 x 220 mm table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Weight 29,5 t dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1992, functionality: unexamined, Technical Specifications Make and model: Bruderer BSTA 25 EL Nominal capacity: 250 kN, 25 tons Year of manufacture: 1992 Year of control upgrade: 2020 Max. number of strokes: 100/1425 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm. Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Hedoyktftopfx Abwsk Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Hsdpfsyiz Eljx Abwjk Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: used, Year of construction: 2001, functionality: fully functional, Technical Specifications Press capacity: 800 kN (80 tons) Stroke rate: 60 – 320 strokes per minute (SPM) Stroke adjustment: 8 – 80 mm Ram adjustment (shut height adjustment): 80 mm Table size: 830 × 700 mm Bolster plate thickness: 80 mm Table opening: 500 × 200 mm Hsdjyidnyspfx Abwek Strip feed height over table: 120 mm Ram area: 500 × 400 mm Ram bore: Ø 50 × 90 mm Ram centering bore tolerance: 30 H7 mm Precision guided ram, multi-roller guidance system. Main motor power: 23 kW Drive system: Flywheel drive with planetary gearbox and pneumatic clutch/brake combination. Machine weight: approx. 8000 kg Gripper Feed Schaal SZV 3: Feed length: 4 – 150 mm Strip width: 10 – 270 mm Strip thickness: 0.1 – 4 mm We also have on stock Schaal SEP 80 with SWV3E 300 mm wide Servo Feeder. Unidor Control, Machine and Operator Safety. Full Technical Documentation in German including Parts list and Technical drawings.

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, Refurbished BRUDERER Stamping Press BSTA 50L incl. new Press Control PCS-100 Technical Specification Press Force: 500 kN Tool Mounting Area (L-R x F-B): 950 x 650 mm Adjustable Stroke Lengths: 16, 19, 25, 32, 38, 44, 51 mm Strokes per Minute (SPM): - 16 mm stroke: 1,120 SPM - 19 mm stroke: 1,030 SPM - 25 mm stroke: 900 SPM Hsdpfx Aboydu Tfewek - 32 mm stroke: 795 SPM - 38 mm stroke: 730 SPM - 44 mm stroke: 680 SPM - 51 mm stroke: 620 SPM Power Connection: 76 kVA Servo Motor Output: 47 kW Shut Height (Die): 206 - 294 mm (depending on stroke) Slide Adjustment: 64 mm Strip Feed Width: 250 mm Strip Feed Height: 60 – 140 mm Additional Features - Completely refurbished high-speed eccentric press - Highly dynamic, adjustable stroke mechanism - Equipped with the latest modular high-performance PCS-100 press control - Energy-efficient drive system for reduced CO2 emissions - Industry 4.0 ready via OPC-UA interface - Press force monitoring - Integrated tool monitoring system - Integrated servo feeder system PV100

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Refurbished BRUDERER Stamping Press BSTA250-75B incl. new PCS-100 Press Control Technical Specifications Pressing force: 250 kN Tool area (L-R x F-B): 750 x 530 mm Adjustable stroke lengths: 13, 16, 19, 25, 32, 38, 44, 47 mm Speeds: 13 mm stroke: 1,500 spm 16 mm stroke: 1,350 spm 19 mm stroke: 1,240 spm 25 mm stroke: 1,075 spm 32 mm stroke: 950 spm 38 mm stroke: 810 spm 44 mm stroke: 700 spm 47 mm stroke: 650 spm Power supply: 76 kVA Servo motor rating: 47 kW Shut height: 175.5 - 239 mm (stroke-dependent) Slide adjustment: 51 mm Strip feed width: 210 mm Hjdpfx Ajyb Etqsbwsk Strip feed height: 50 – 120 mm Additional Information · Completely refurbished eccentric high-speed press · Highly dynamic, adjustable stroke design · Equipped with modern, high-performance modular PCS-100 press control · Energy-efficient drive technology for reduced CO₂ emissions · Industry 4.0 ready via OPC-UA interface · Integrated tool monitoring · Integrated servo feed system

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9012, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 630 mm, total width: 5,100 mm, total length: 2,000 mm, pressing force: 400 t, clearance between the columns: 3,000 mm, overall weight: 65,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 400 t, The machine is partially overhauled and completed. The control system is built according to customer specifications (Siemens control). Column spacing: 3000 mm Stroke adjustment: 20 - 80 mm Ram adjustment: 100 mm Distance table - ram: 630 mm Ram strokes per minute: 100 Hodpfx Abox U Ur Rowsk Delivery time approx. 3 - 4 months after design of the new control system based on the customer's specific requirements. Price on request.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9174, total height: 3,400 mm, ram adjustment: 100 mm, installation height: 530 mm, total width: 2,150 mm, total length: 1,450 mm, pressing force: 100 t, clearance between the columns: 830 mm, overall weight: 15,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 100 t, The machine is completely overhauled and finished, including new Siemens S1500/MTP1000 press control. Upright spacing: 830 mm Distance table to ram: 530 mm Stroke adjustment: 10 - 120 mm Ram adjustment: 100 mm Ram strokes/minute: 30-120 Hsdpfex U Ucpex Abwjk Delivery time: immediately Price on request

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 8923, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 650 mm, total width: 3,100 mm, total length: 2,000 mm, pressing force: 320 t, clearance between the columns: 1,530 mm, overall weight: 38,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 320 t, The machine is fully overhauled and completed. The control system is built according to customer specifications (Siemens control). Column gap: 1530 mm Distance table – ram: 650 mm Hodpfx Ajx U Tudobwok Ram adjustment: 100 mm Stroke adjustment: 20 – 160 mm Ram strokes per minute: 30 – 120 Delivery time approx. 3 – 4 months after configuration of the new control system based on customer-specific requirements. Price on request

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Hedox Triwopfx Abwok Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: used, Year of construction: 2001, SanGiacomo Press Model: T250 DM Hodpfex Ex Dxex Abwok Pressing force: 2,500 kN Stroke adjustment: 21 - 230 mm Ram adjustment: 120 mm Stroke rate: up to 75 strokes/min Ram surface: 2,300 x 1,090 mm Table surface: 2,300 x 1,090 mm Dimensions: 3,550 x 1,910 x 5,200 mm (LxWxH) Machine weight: 42,000 kg

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering. Hedexz Ugxepfx Abwek

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Hedpfx Absxzr Ruewok Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.