MFL Industrie

Condition: excellent (used), XYZ SLX 425 x 1.25m CNC Lathe Year 2016 Serial number L769 ProtoTRAK SLX Distance between centres 1,250 mm Maximum cutting length 1,080 mm Swing over bed 480 mm Swing over cross slide 257 mm Swing in gap 700 mm Gap in front of faceplate 170 mm Cross slide travel 230 mm Spindle bore 80 mm Fedpfsz N Ambjx Ahdjpn Spindle nose D1-8 Camlock Spindle motor 7.5 kW / 10 hp Spindle speed range 25–2,500 rpm in 3 ranges Tailstock quill travel 160 mm Tailstock taper No. 5 Morse taper Tailstock quill diameter 75 mm Bed width 370 mm

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, Equipment: documentation/manual, CNC Lathe DMG GILDEMEISTER NEF 400 TECHNICAL DATA: • Year of manufacture 2006 • Turning length max. 650 mm • Swing over bed max. 400 mm • Swing over cross slide max. 270 mm • Control FANUC 210i • Spindle speed max. 4 000 rpm • Bar capacity max. 65 mm • Tool turret 8 stations (VDI 30) • Tailstock MT 4 • USB Fodjz Nyucspfx Ahdopn • Technical documentation • Machine dimensions approx. 2.1 x 1.8 x 1.7 m • Weight approx. 2 800 kg Machine in very good technical condition, the spindle runs quietly – it has been completely overhauled and has 0 operating hours. The lathe is connected to power and can be inspected and tested on site by prior appointment. Professional loading is included in the price, and we can also help you organise transport within the EU. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: used, Year of construction: 2016, control SIEMENS Sinumerik 828D centre distance ca. 450 mm x-axis ca. 240 mm z-axis ca. 540 mm spindle tunring speed 4.500 U/min number of tool places 12 Pos. weight ca. 5.300 kg Condition: Used Technical features & accessories: - AFS 600 filtration system - SUN KOREA SL2300 chip conveyor - 12-station star-type turret for driven tools Fsdpfez Nqbasx Ahdjpn Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: not inspected (used), Year of construction: 1989, 2 UNITS X , 10:13:00] Saeid Khodaparast: CNC lathe YAM CK-3A (1989) at auction. FANUC series O-T control, approx. 6,647 operating hours, footprint approx. 4400 x 1800 x 2600 Length between centres: 900 mm • Turning length: 800 mm Fjdpfxjz I Ed Se Ahdopn • Diameter above the bed: 550 mm • X-axis travel: 380 mm • Spindle bore: 91 mm • Maximum workpiece weight: 900 kg WHATS APP

Condition: used, Year of construction: 1999, CNC Lathe YANG type SML-20 Year of construction: 1999 Travel X: 520 mm Numerical Command FANUC Serial OTD Maxi diameter in brocken bed: Ø 480 mm Fpedpfx Ahoz Iz Dhjdsn Maxi turning diameter: 200 mm x length 508 mm Spindle diameter: Ø 42 mm Rotation: 4500 RPM Tailstock CM4 Turret 8 tools Equipped with 1 Bar Feeder type DH 65 Equipped with 1 chip conveyor Weight: approx 2,5 T

Condition: excellent (used), operating hours: 8,640 h, Maximum height 260 mm Turning length 600 mm Max. swing diameter over bed 400 mm Max. swing diameter over cross slide 225 mm Cross travel 260 mm Longitudinal travel 660 mm Spindle head DIN Size 140 h5 Spindle bore 68 mm Fpedpfxjz Icuzj Ahden Speed range 25 – 4000 rpm Feed rate range, longitudinal and cross 0.5 – 5000 mm/min Rapid traverse, longitudinal and cross 9 m/min Tailstock taper MK 4 Tailstock quill travel 100 mm Main drive 22 kW Dimensions L x W x H approx. 3600 x 1720 x 1650 mm Weight 3200 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 • Electronic handwheel • RS 232 interface • Hydraulic 3-jaw chuck, diameter 200 mm • 12-station tool turret, manufacturer SAUTER, internal coolant supply, VDI 30, mounting bore Ø 30 mm, DIN 69880 • Articulated chip conveyor with coolant system • Electr. foot switch for hydraulic 3-jaw chuck and hydraulic tailstock quill • Various tool holders • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2005, functionality: unexamined, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used slant-bed lathe, manufactured in 2005 by Trens in Slovakia (Type SBL 500 CNC). It features a 12-position turret with 6 powered stations and a Siemens Sinumerik 810D control system. An identical TSL 500 from 2006 is available at the same location in the Düsseldorf area. Anyone looking for two identical machines for a manufacturing cell can acquire both together. TECHNICAL DATA - Year of manufacture: 2005 - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-position, with 6 powered stations - Main drive: 22 kW, max. 4,200 rpm EQUIPMENT AND ACCESSORIES - Tsubaki chip conveyor with cable carrier (SRF 040) - Tool holders, stocked - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for shafts, flanges, and housing components up to 400 mm in diameter, including drilling and milling operations. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact details for local transport companies. Price on request. Please feel free to contact us via the contact form. Fsdjz H Ufvjpfx Ahdopn

Condition: used, Year of construction: 2006, machine/vehicle number: 76005007 06 0006, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 5,250 kg, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used inclined-bed lathe, manufactured in 2006. The manufacturer is Trens in Trenčín (Slovakia), where the machine is known as the SBL 500 CNC. The 12-station turret has 6 driven stations, allowing for drilling and milling operations to be performed in a single setup. It is controlled by a Siemens Sinumerik 810D. The machine is located in the Düsseldorf area and was running during our inspection. TECHNICAL DATA - Year of manufacture: 2006 (according to the nameplate) - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-station, with 6 driven stations - Main drive: 22 kW, max. 4,200 rpm - Machine weight: 5,250 kg (nameplate) EQUIPMENT AND ACCESSORIES - Chip conveyor Tsubaki with cable carrier (SRF 040) - Tool holders, equipped - Turning and clamping tools - Setup tools CONDITION The machine was running during our inspection on October 1, 2026. We can send you short videos of the machine in operation upon request. AREAS OF APPLICATION Suitable for shafts, flanges, and housing parts up to 400 mm in diameter, where transverse drilling or surface machining is to be carried out at the same time. LOCATION AND PROCESSING Fpjdpfx Aoz H Udxehdsn The machine is located in the Düsseldorf area. Inspections can be arranged by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact information for forwarding companies in the region. Price on request. Please contact us via the contact form.

Condition: used, Year of construction: 2008, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2008 Control : Siemens 840D - Powerline Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Röhm KZZT-AF 65/6 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, Röhm KFD-HE 210 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Fedez Hh A Ijpfx Ahdjpn Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Toolmeasurement:Automatic Measuringarm, Marposs Rawmaterialfeed:Barloader, EMCO TOP-Load 10-65 (TOP Automazioni ETL 10-65) Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, Bristol EF David Toolholder:Misc. static and driven toolholder Further Equipment:Spindlechiller

Condition: excellent (used), Year of construction: 2013, XYZ 1630 SLX CNC Lathe Fpedpjz E R N Usfx Ahdon New 2013. Swing 400mm x 760mm B.C. Spindle speeds & bore 150- 2500rpm & 54mm. C/w 3jaw chuck, quick change tool-post.

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm Fpjdpfx Ahez Ekzwedsn 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: used, Year of construction: 1999, functionality: unexamined, machine/vehicle number: 252499, type of input current: three-phase, Cycle-controlled lathe, Kern model, status: in working order, year of manufacture 1999, control system: Heidenhain. Machine no. 252499, connection: 3 x 380 V, 50 Hz, rated current 30 A, control voltage 24 V. Equipment: protective enclosure with viewing windows, three-jaw chuck, Multifix quick-change tool holder, tailstock, coolant supply, handwheels for the cross slide and longitudinal slide. Fpedpfxoz A Ui Hj Ahdjn Location: Homburg (Saar), Germany. Inspection by appointment. Price on request, net plus VAT, ex works; disassembly and loading subject to agreement. All information is subject to change without notice.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 730 mm, turning diameter: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS Travel in X-axis: 240 mm Travel in Z-axis: 640 mm Turning length: 730 mm Turning diameter: 400 mm Fpedpfx Ahez Ahyboden Spindle speed: 4,000 rpm Spindle bore: 66 mm MACHINE DETAILS Control system: Siemens Machine weight, approx.: 5,500 kg EQUIPMENT Automatic tool changer (ATC) Tailstock Parts catcher

Condition: good (used), Year of construction: 2004, 569mm Swing, 419mm Max Turned Diameter, 640mm Between Centres, 10 Station Turret, 3500rpm 22KW Spindle, Fanuc I Control, 24m/minute rapids, 250mm Power Chuck , parts catcher, Tool setter, Low Volt Light Fodpfxszzzh Ne Ahdjpn

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 66 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 800 mm, total height: 1,600 mm, total length: 2,750 mm, total width: 1,340 mm, overall weight: 1,750 kg, spindle nose: A2-6, Equipment: documentation/manual, Spindle bore: 66 mm Spindle nose: A2-6 Spindle speed: 30~2500 rpm SIEMENS 808D Advanced control system SIEMENS servo drives Fedezzcyajpfx Ahdepn Frequency-controlled main spindle motor (5.5 kW) Hydraulic chuck, 200 mm, with hydraulic unit Hydraulic tailstock Automatic turret with 8 stations (20x20 mm) SIEMENS electrical components MK4 live center Cooling system Automatic lubrication system Electronic handwheel LED work light Machine body made of cast iron Door switch 3-color warning light

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes Fpsdozy Npfopfx Ahden MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: excellent (used), Year of construction: 2001, Vertical CNC lathe Brand: DAEWOO (DOOSAN) Type: PUMA V550 Year: 2001 (10,000 cutting hours) Fedpezym Uxjfx Ahdspn CNC: FANUC 18i-T Specifications: Turning capabilities: Maximum turning diameter: 800 mm Maximum workpiece diameter: 730 mm Maximum turning height: 750 mm Horizontal travel: 390 mm Vertical travel: 780 mm 3-jaw hydraulic chuck: Diameter: 500 mm Rotation speed: 20 to 2000 rpm Main motor power: 50/37 kW Dimensions (width x depth x height) without conveyor: 1,950 x 2720 x 3070 mm Weight: 9 tons Equipped with: 8-tool turret Set of turning tool holders Set of jaws Chip conveyor

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52000901-01, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, type of input current: AC, overall weight: 3,300 kg, Equipment: documentation/manual, CNC lathe in very good condition for sale. Turret head with 8 tool positions. Hydraulic chuck D160 with numerous spare jaws. Complete documentation is available. Fpjdpfx Ahezxy Ngedjn For further information or videos, please contact me privately!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65377, turning diameter over cross slide: 432 mm, turning length: 864 mm, turning diameter: 762 mm, spindle bore: 88 mm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22,000 W, rotational speed (max.): 3,400 rpm, total height: 1,880 mm, total length: 3,800 mm, total width: 1,955 mm, overall weight: 7,250 kg, Equipment: rotational speed infinitely variable, The machine its "as new" Only 3000Hours CNC Controller HAAS Driven tools Turningdiameter 432mm Swing over bed 762mm Turninglenght 864mm Bar diameter 76mm Spindle bor 88mm 12 pos turret VDI 40 Chip convyer Fpjdjzxqx Eopfx Ahden Tool presetter

Condition: like new (used), Year of construction: 2019, Smec Revolver, unused, BMT 55. Fpedjzw Uz Iepfx Ahdjn

Condition: used, Year of construction: 2017, functionality: fully functional, CNC lathe Smec SL2500BM, year 2017, made in Korea. Fanuc OiTF control with Manual Guide. C-axis driven tooling. Max turning length: 500mm. Max turning diameter: 405mm. Spindle bore: 76mm. SMW autoblock chuck, 315mm, with 91mm bore, installed. Fjdpfx Aozwu Rcehdopn Max spindle speed: 3500 rpm. Z-axis travel: 540mm. X-axis travel: 245mm. 24-position BMT 65 turret. -Tailstock -Tool probe -Part catcher -Chip conveyor -Coolant tank with pump -Documentation -Tool holders: 12 pieces, including 3 driven tools (2/1)

Condition: used, Year of construction: 2016, HEIGHT OF CENTERS 550 MM PERMITTED DIAMETER OVER BED 1100 MM PERMITTED DIAMETER OVER CARRIAGE 720 MM BED WIDTH 690 MM SPINDLE BORE 160 MM SPINDLE NOSE ASA 11" ROTATION SPEED 0 - 800 RPM 3 RANGES SPINDLE MOTOR POWER 39 KW AUTOMATIC RAPID TRAVEL 7 M/MIN C-AXIS Y-AXIS +/- 60 MM PERMITTED WEIGHT BETWEEN CENTERS 10000 KG Fodezwlufjpfx Ahdjpn PERMITTED WEIGHT BETWEEN CENTERS WITH STEADY REST 12000 KG TAILSTOCK CONE 6 CM TAILSTOCK SLEEVE DIAMETER 140 MM WEIGHT 16,000 KG CNC D. ELECTRON Z 32 ELECTRONIC HANDWHEEL SELF-CENTERING CHUCK, DIAM. 500 MM PLATEU DIAM. 1000 MM BARUFFALDI TBMA Y C 250 MOTORIZED TURRET WITH 12 POSITIONS VDI 50 CHIP CONVEYOR AUTOBLOK RX 6 HYDRAULIC STEADY, RANGE 85 - 505 MM YOM 2016

Condition: used, Year of construction: 2014, control FANUC Series Oi-TD greates pass round over bed 670 mm swing diameter over slide rest 500 mm max. turning diameter 400 mm max. turning length 600 mm spindle nose A2-8 Fjdpfszvzauex Ahdjpn spindle passage 90 mm diameter in the front bearing 130 mm spindle tunring speed 35 - 3.500 U/min number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1999, turning diameter / mm Fpedozu A Ttjpfx Ahdsn turning length / mm control /

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Fpjdpfxezux Iyj Ahdjn Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs