Pillar Type Swivelling Crane

VETTER FOERDERTECHNIK AS8-4,5

Condition: used, Year of construction: 1981, arm length 3600 mm total column height ca 5500 mm weight max. in kg 1000 kg travel of hook 3000 mm height of hook ca. 4000 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min Codpfjxtqwqsx Aa Tehc - with trolley System is dismantled.

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 2260081, load capacity: 400 kg, Hello, I have this fully pneumatic DELMEC remote arm, which can lift and move up to 400 kg with one hand. The machine has been used very little; it's a showroom model. The machine is complete and in perfect working order. It can be sold as is, delivered, and even installed (to be determined together). Codpfx Aswcpl Uoa Tohc

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers Chedpfx Aaszwg Tis Tsc - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Coulmn-mounted slewing crane | Brand: Konecranes | Type: M50-7,0 Year of manufacture: 04/2007 The crane can be inspected at the factory by prior appointment. Chsdpfx Aoz Ertuoa Toc Condition: Barely used (used for 1–2 years solely for light assembly work). Before disassembly, an acceptance inspection will, of course, be carried out / an inspection report drawn up. TECHNICAL SPECIFICATIONS: - Capacitiy: 5 tons - Jib length: 7.000 mm - Height: 7.360 mm - Swivel range: limited - Permissible weight of hoist (with counterweight): 0,6 tons - Max. hoisting speed: 16 m/min - Foundation with anchor bolts - Operation voltage: 400 V, 50 Hz - Control voltage: 48 V - Electronic carriage - Documentation - CE marking No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: used, functionality: fully functional, machine/vehicle number: 001649U, load capacity: 6,300 kg, For sale Chodpfx Aaozik Nxo Tjc Used Demag single-girder overhead crane, approximately 17,000 mm span x 6,300 kg capacity. Ref. 001649U * Stored in a dry environment * Technically 100% in order and inspected All our new and used cranes that we install are supplied with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height, and repainting if required * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: good (used), Year of construction: 2009, Column-slewing crane, steel / Konecranes, 250kg, outreach 4.09m – used: Price ex-works: €1,750.00 (net)! Manufacturer: Stahl / Konecranes Type: AS2.5-4.5 Year of manufacture: 03/2009 Factory number: PO10062432 Load capacity: 250kg Height: approx. 2.60m Outreach 4.09m, or 4.35m Main switch missing! VP: 850mm AB No 920309/01 Cjdpfx Aezbyfhja Tohc Trolley: Year of manufacture: 2009 Factory number: 3020476 Type: SU-A 1343 110 Travel speed 20.0 / 5.00 m/min I = 8.09 Condition: good Available: from approx. August 2026 Location: Leipzig

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: GER, Technical data: 1 Abus VS column-mounted slewing crane, nominal load 500 KG Maximum load at full outreach: 500 KG / 0.5 tons Height: approx. 3.8 m, under jib: approx. 3.4 m Outreach: approx. 4 m, hook height: approx. 3 m Chsdpfx Aasy Hgnnj Tec Base plate approx. 60x60 cm Total weight approx. 700 kg Including Abus GM4 chain hoist (year of manufacture 2018) with pendant control (2 lifting speeds) Connection: 400V 16A, slewing range 360° Crane is disassembled and immediately available Article location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping via forwarding agent or collection by appointment

Condition: used, functionality: fully functional, machine/vehicle number: 001668U, load capacity: 1,000 kg, For sale Used Demag single-girder overhead crane, approximately 12,300 mm span x 1,000 kg capacity. Ref. 001668U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver installed, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control * Tandem control Cjdozilrnspfx Aa Tehc * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder crane. Chain hoist.