SCREDDER FOR PLASTICS

VEM

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 100 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 28 mm Ksdpeb E N U Nefx Ahwedh -Protection class: IP 55 -Dimensions: 370/190/H250 mm -Weight: 21 kg

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 800/300/H350 mm -Weight: 68 kg Kdodpfx Ajciw Smehweh

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 5,000 kg, total length: 50,000 mm, total width: 250,000 mm, input frequency: 50 Hz, Complete Fuel Polishing & Storage System – 130,000 L Capacity Available for immediate decommissioning from a data centre: a fully equipped fuel storage and polishing system designed for reliable diesel generator operation. Main Components: Fuel Transfer Pumps (x4) Independently controlled via front-panel PLC Operational indicators and flow meters (L/h) Filtration Units (Filtertechnik) High-efficiency diesel filtration skids Integrated monitoring and alarm panels (differential pressure, overload, emergency stop) Electrical Control Panels Manual/automatic operation modes System status and fault indicators (low flow, bypass, pre-alarm) Emergency stop functionality Underground Diesel Storage Tanks (x4) Total capacity 130,000 litres Connected via reinforced piping and fuel supply lines Fuel Pipework & Monitoring High-grade piping with safety valves and pressure sensors (Barksdale, Pyropress) Kjdow Hdg Ujpfx Ahwsdh Designed for safe and precise operation External Housing – Fuel Pump Room Weather-resistant metal cabin with safety signage (“Highly Flammable”) Internal insulation for added protection This system is ideal for data centres, industrial facilities, or any large-scale diesel generator installations, offering high reliability, complete monitoring, and easy relocation.

Condition: used, Design: B5 Power: 15 kW Kodpfx Ahewcr Urjwodh Flange hole spacing: approx. 270 mm Shaft: 42 x 110 mm

Condition: new, Year of construction: 2014, An unused three-phase electric motor VEM is available. Design: IM1001, protection class: IP55, rotation direction: CCW, insulation class: F, lubrication system: Shell Alvania RL3, rated power: 4600kW (approx. 4.6MW), rated voltage: 6300V, rated current: 460A, power factor: 0.88, rotor voltage: 2000V, rated speed: 994rpm, moment of inertia: 690km/m². Machine dimensions X/Y/Z: approx. 4150mm/2300mm/1900mm, weight: approx. 20000kg. The machine is unused and therefore as new. Documentation vorhanden. An on-site inspection is possible. Kdodpoxwywzofx Ahwoh

Condition: ready for operation (used), Year of construction: 2017, One Siemens flange gear motor and two identical VEM three-phase motors are available. 1) Siemens flange gear motor, year of manufacture: 2014, shaft diameter: 80mm, power: 160kW, speed: 1485rpm, gear ratio: 33. 2) 2x VEM three-phase motors, year of manufacture: 2017, power: 200kW, speed: 1490rpm, operating mode: continuous operation, power factor: 0.87, weight: approx. 250kg. An on-site inspection is possible. Individual sale possible. Kodoxxl Inspfx Ahwjdh

Condition: new, Year of construction: 2010, Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich. Kdedpfoxxl Ihox Ahwoh

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg Kdodsyb R Nwspfx Ahwsh

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic Kodsyb R Ndopfx Ahwodh -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm Kedpoyb R Akofx Ahwsdh -Weight: 1140 kg