Cast resin epoxy transformers - dry

SGB 2000 22/0,4kV

Condition: refurbished (used), Extinguishing water tank according to DIN 14230 (underground extinguishing water tank): Rsdpfxji Enwve Afzjn 100,000 liter extinguishing water tank for underground storage, single or double walled, 1 manhole DN 600 with blind cover incl. seal and screws, outside with bitumen insulation - second-hand -... tank volume: 100.000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm weight: approx. 11.600 kg Material: steel material S 235 JRG 2 The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bituminous exterior coating by us at the factory. On request, we can provide the tank with a bitumen-based full interior coating (against corrosion) or epoxy resin interior coating We can offer you a cost-effective delivery with our own truck. Just let us know the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth(at)barth-tank.de. Trade-in and purchase of tanks/vessels is possible, just contact us. We have such tanks of course also in the following sizes constantly in stock: - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000, 120.000 liters.

Condition: ready for operation (used), Year of construction: 2019, Two identical three-phase cast resin transformers are available. Frequency: 50 Hz, insulation class: F / F. Rated power/voltage/current: 4509kVA/10000V/260.3A. Dimensions X/Y/Z: 2385mm/1850mm/2682mm, weight: 11200kg. On-site inspection is possible. Rodjr A Eibopfx Afzen

Condition: excellent (used), Stainless steel tank 2 m3 Rodpfx Aoq U Aufsfzon

Condition: refurbished (used), 100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm Weight: approx. 16.300 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Rsdpfx Afshh Suhezjn fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - bituminous coating on the outside for protection - Upon request, we can provide the tank with a full interior coating on bitumen basis or epoxy resin interior coating (against corrosion) - It is also possible to line the tank with a with a plastic inner cover A cost-effective delivery with our own truck is possible. Just tell us the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment.

Condition: good (used), Used GRP flat-bottom tank with 221 m³ capacity Previous storage medium: 30% hydrochloric acid Density: 1.15 kg/dm³ Volume approx. 221,000 liters Diameter approx. 4,000 mm Total height approx. 17,420 mm Weight approx. 7,650 kg Tank with domed top and flat bottom. The tank is also equipped with mounting points for an access ladder. Equipment: Rjdpfx Afoldggnjzjn 1 manhole DN 600 1 outlet nozzle DN 80 1 vent nozzle DN 100 1 filling nozzle DN 80 with elbow to the wall 1 pipe socket DN 80 for level measurement 1 coupling R 2" for overfill protection otherwise as per drawing.

Condition: used, 1 cylindrical, upright stainless steel container, used Contents: 240 cbm Order number: 4228 Material: V2A 1.4301 Inside weld seams ground Dimensions: 4,200 mm overall diameter 21,500 mm approx. total height Design: cylindrical, upright with lower, inwardly curved base, with a slope to the outlet with upper conical base Propeller agitator in the cylinder below installed at an angle, 2.7 kW, 465/970 rpm. Insulation around the cylinder and upper base, V2A cover Connections: 1 manhole 350 x 450 in the cylinder Ventilation with hood in the upper base 2 spray heads various sleeves for sensors Rsdov Dtdxopfx Afzon Outlet at the lowest point Weight: approx. 15 tons