Metal detector

S+S

Condition: excellent (used), functionality: fully functional, mileage: 533,369 km, power: 309 kW (420.12 HP), first registration: 08/2015, fuel type: diesel, empty load weight: 12,030 kg, maximum load weight: 13,970 kg, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 10/2026, fuel: diesel, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2015, Equipment: air conditioning, electric window regulation, full service history, tail-lift, trailer coupling, IVECO Stralis AS260S46/2x, with drop-side body and tilting wall/web trailer. / TÜV valid until 10/2026 • Manufacturer: Iveco • Model: Stralis AS260S46 • Mileage: 533,369 km • First registration: 08/21/2015 • Power: 309 kW / 420 hp • Transmission: Automatic • Drop-side body: Dautel 250010 • Body: Ewers tilting body Hurowa Plus PR-L • Internal dimensions: • Length: 8 meters • Width: 2.45 meters • Height: 2.10 meters • For beverage transport • Long-haul cab • Rear view camera • Air conditioning • Cruise control • Lane keeping assist • Differential lock • ESP • 2 x trailer hitch • TÜV: October 2026 • Unladen weight: 12,030 kg • Payload: 13,970 kg • Permissible total weight: 26,000 kg • Euro: 6 _____ WEB PRASQ 18 • Manufacturer: WEB • Model: PRASQ 18 Cjdpfx Aqjzin Ulsljrd • First registration: 08/21/2015 • Body: Ewers tilting wall body Hurowa Plus PR-L • Drop-side body: Dautel 250010 • Turntable • Internal dimensions: • Length: 6.55 meters • Width: 2.45 meters • Height: 2.2 meters • TÜV: October 2026 • Unladen weight: 5,060 kg • Payload: 12,940 kg • Permissible total weight: 18,000 kg • German vehicle • German registration documents • Immediately ready for use • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typos not excluded. • Sale subject to our general terms and conditions.

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Cedpfxoyxxxve Aqlord Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: used, Year of construction: 2002, Overview  This tank package was manufactured in 2002 by Spanish company Parcitank S.A., a recognized producer of stainless steel tanks for the wine and food industry. The nine tanks are suitable for fermentation or storage depending on their configuration. The set is offered as three packs, each consisting of one 20,000 L fermentation tank, one 15,000 L storage tank, and one 10,000 L storage tank. On request, single packs can also be purchased. All tanks are made of AISI 304 stainless steel and are in good condition. Technical data  - Fermentation tanks - 200hl (3 units): - Capacity: 20,000 L - Diameter: 2,500 mm - Cylindrical height: 4,000 mm - Type: Atmospheric with cooling jackets - Storage tanks - 150hl (3 units): Cjdpfx Aqoxbua Sslord - Capacity: 15,000 L - Diameter: 2,500 mm - Cylindrical height: 3,000 mm - Type: Atmospheric - Storage tanks - 100hl (3 units): - Capacity: 10,000 L - Diameter: 2,000 mm - Cylindrical height: 3,000 mm - Type: Atmospheric - Material: AISI 304 stainless steel Scope of Delivery - 9 stainless steel tanks (3 × 200 hl, 3 × 150 hl, 3 × 100 hl) - Optional: Sale in complete set or in 3 individual packs (1 × 200 hl + 1 × 150 hl + 1 × 100 hl)

Condition: used, Year of construction: 2014, Overview  This set of 6 isobaric fermentation tanks was manufactured in 2014 by the Spanish company Talleres Perman S.L.. Each tank has a capacity of 1,000 liters and is designed for fermentation and maturation under pressure, ideal for beer, cider or sparkling wine. The tanks have integrated cooling jackets and have decorative wooden cladding on the outside, which can be removed if necessary. The tanks are for sale as a planned increase in production was ultimately not realized. Available immediately. Technical details  Csdpfx Aqjwzb T Uslord - Capacity: 6 x 1,000 liters - Working pressure: up to 3 bar - Diameter: approx. 125 cm - Height: approx. 190 cm - Base design: conical base with 30° angle - Type: Isobaric fermentation and maturation tanks with cooling jacket - With integrated cooling jackets - With decorative wooden cladding (removable) Scope of delivery  - 6 x Talleres Perman DI1 | Year of construction 2014 isobaric fermentation and maturation tanks

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Crsdpfxjzh I Iie Aqljd Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Crsdpfx Aqsvvkmbjljd Storage location: Nattheim

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: B543, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, For sale is a very well-maintained Cronoplast 6/10P injection molding machine, manufactured in 2008. The machine was operated exclusively by a professional injection molder, regularly maintained, and is in excellent condition. Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Codpsytgmvjfx Aqlord Equipment & Highlights ✔ Selection gate – ensures clean ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – ensures precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Blow-out unit – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Since you are buying directly from the machine owner, you save on dealer commission costs. We have more of these machines in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Technical Data – Cronoplast 6/10P Screw / Injection Unit Technical Data - Cronoplast 6/10P Plasticizing Unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping Unit - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejector force 5 kN - Ejector stroke 45 mm Dimensions: - Weight incl. frame approx. 350 kg - LxWxH: 116 cm x 80 cm x 198 cm The sale is made excluding any warranty and liability for defects.

Condition: used, Year of construction: 2009, operating hours: 550 h, functionality: limited functionality, machine/vehicle number: 041, Bridge saw for marble and granite, with rotating and tilting table, new steel foundations for the bridge and table are available. Dimensions: 560 cm long, 460 cm wide, 300 cm high Weight approx. 6160 kg, disc motor inverter, Crodpjzim Dlefx Aqljd work table with motor drive and tilt adjustment, linear shaping system, disc tilt for bevel cutting.

Condition: ready for operation (used), ASS 3200 ASS 3500 Cjdju I N Ekopfx Aqlord automatic pocket opener

Condition: used, functionality: unexamined, Year of construction: 1978, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 400 mm, roller diameter: 622 mm, rotational speed (min.): 2 rpm, rotational speed (max.): 4 rpm, rotational speed (distance/time): 4,900 mm/min, pipe diameter (max.): 254 mm, tube wall thickness (max.): 10 mm, overall weight: 22,000 kg, total length: 3,900 mm, total width: 2,600 mm, total height: 3,300 mm, Equipment: emergency stop, BOLDRINI BSA 40 – Heavy-duty profile bending machine / roll for profiles For sale: a heavy-duty industrial profile bending machine, model BOLDRINI BSA 40, manufactured by BOLDRINI S.p.A., Italy. The machine is designed for bending and rolling metal profiles, tubes, angle profiles, rails, flanges, T-profiles, double T-profiles, and other structural elements with a large radius. It is suitable for the production of metal structures, halls, shipbuilding, tubular structures, tanks, flanges, and heavy industrial fabrication. Key data: Manufacturer: BOLDRINI S.p.A. Model: BSA 40 Year of manufacture: 1978 Serial number: 5936 Machine type: profile bending machine / angle bending roll / section bending machine Working system: 3 rollers Control: manual / electromechanical Drive: electric Weight: approximately 22,000 kg Condition: used, stored outside of a production line Available tools: set of rollers, dies, segments, and additional attachments, as shown in the pictures Approximate capacity according to model BSA 40: Angle profile: up to approximately 203 x 203 x 25 mm Codpfezilzvox Aqljrd Tubes: up to approximately Ø254 mm Suitable for: tubes, L-profiles, T-profiles, double T-profiles, rails, flanges, and profiles with a large radius Equipment and features: The machine has a robust, heavy-duty construction, large working rollers, and mechanical adjustment via screw spindles. Working rollers, profile dies, additional segments, and attachments for various types of profiles are available. The electrical panel is present and includes contactors, relays, fuses, a transformer, terminal blocks, and controls. The machine has not been tested under load at the moment. Visible surface corrosion is present on some of the rollers, tools, and housing due to outdoor storage. An on-site inspection and electrical/mechanical check are recommended before commissioning.