Paternoster

Rapha-Systems Paternoster 3800

Year of construction: 2023, Condition: new, In the field of 3D Thermoforming, we also offer presses, brushing machines, film storage paternoster, and membrane on machineseeker! Function: The feeding tray of the press is in position, the work piece carpet is pressed under the holding device. With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device. Advantages: Bfpcjrpzjl • The 3D-thermoforming productivity increases- because of quick clearing the table • Savings of time and staff - the preliminary cutting-out of the pressed parts is removed completely • Simple handling of the boards • The foil edges of the 3D furniture doors are not damaged, because the foil is not pulled over the edge of the door • Automatic transfer of the whole carpet to a carpet trimming machine is optionally available. • The pins will be protected with this turn over system because the cutout of the over standing foil is made not on the pin table. Details: • Rigid welded frame construction to accommodate the machine parts • Standard size 2800 x 2220 mm x 1200 mm • Hydraulic power unit • Turn table consisting of 9 arms with a special surface of rubber • Vacuum system with hose connections for the turn table • Turning cycle approx. 18-25 seconds • Control System: Siemens LOGO • Protective fences and security devices For the presentation of the turning process, a video is available.

Year of construction: 2023, Condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker! RBM 1500 F e a t u r e s • Four-head rotating brush • Infeed inclined roller conveyor with separation • Spiral brush for removal of loose glue residues O p t i o n s • Fifth head rotary brush • discharge roller conveyor with buffer function • Deionization of the furniture fronts after cleaning • Modem for remote maintenance A d v a n t a g e s • Chaotic occupancy by automatic Adaptation to front thickness and size • Up to 2000 parts / 8 h The RBM 1500 is a brush machine for film-coated 3DMöbelfronten. The proven four-head rotary brush system removes the Glue overspray on the backs of the furniture fronts and achieves an optimal edge quality. This result is achieved by the disc brushes pneumatically pressure-controlled touch down and the backs the fronts are singing. The RBM 1500 is for a performance of up to designed for 2000 parts per shift. This is the machine the optimal brush system for smaller and medium sized Productions. The RBM 1500 is with an automatic size and Thickness detection of furniture fronts equipped. This allows adaptation to chaotic loading without loss of time in the run. The flexible control offers the Possibility of brushing rectangle and contour parts. The low-maintenance brushes and long service life ensure low production costs. P r o d u c t i o n Machine: RBM 1500 Front shape: Rectangle / Contour Frontsize minimal (L x W x H): 180 x 90 x 15 mm No7Uf Maximum frontsize (L x W x H): 3000 x 650 x 38 mm Brush operation: 2000 parts per 8 h Standard parts of 650 x 400 mm

Condition: used, Technical data single-deck ballistic separator for three separation fractions: Cfvvgkq3G0 Manufacturer Lubo Screening & Recycling Systems B.V. Type Elliptical 10EBB05 Year of construction 2015 Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kg Note on the separation process: The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans. Condition of the machine: The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in a well-maintained condition and works perfectly. On request, various spare parts can be purchased for a separate, additional fee. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2020, 1 x Turbo systems depositor. Year: 2020 Dq3Xc7 Type: D253P

Condition: excellent (used), Year of construction: 2008, 1 x Loma Systems metal detector with alarm and belt stop-on-detect reject system. Model – IQ3. B3Rvhu9Ajq Date of manufacture – 2008. Aperture dimensions – 550mm wide x 300mm high (useable 260mm). Belt dimensions – 1800mm long x 500mm wide. Frequency – variable, to suit a wide range of products. Electrical requirements – 415 V / 50 hz / 3 phase. Overall dimensions – 1800mm long x 1120mm wide x 1340mm high. Condition – Very good, fully working.

Condition: ready for operation (used), Condition Used B2Nenxwcrk This listing is for a Enviro Systems UVIC-750

Year of construction: 2013, Condition: excellent (used), LPG Systems LPG Cellu M6 Endermolab 1I or opt. 2I Beauty device Body and face device (new) Endermolift(Ergolift) newest world patent for the face tested by trainers (beauty and therapy) completely refurbished and overhauled fresh maintenance done Last Edition (Black and White) New hose Overhauled rolling head KM80 from 2013 New rolling head KM70 or therapy head TR50 New rolling head KM50 New controller from previous owner Device has been freshly overhauled new valves new gaskets new hose new condensers new filters, etc... New price: 39980 Euro net suitable for Endermologiebody and endermologieface X8H7Xbvd optional upgrade to Ergolift patent 2014 plus 2000 Euro Lipomassage and Endermolifttechnik feasible like new and immediately available in BRD opt. 2 day training on site with final exam and MIK certificate opt. Delivery and start-up according to LPG manual specifications opt.starter package (bodywear,filter,claps,flyer) A high-quality device in the UpperClass of the Medical Beauty League! No junk like ultrasound or radio frequency from China. Ergodrive, Ergolift, 12 months warranty from date of purchase only valid with a 2 day training in connection with final examination Start your endermologie season now. A 100% natural mechanostimulation ensures a painless, but intensive treatment.the treatment with a high addiction factor. Clients come with the goal of strengthening and firming connective tissue, reducing cellulite, men's and women's skin.

Condition: good (used), Year of construction: 2021, Functionality: fully functional, conveyor belt length: 60,000 mm, conveyor belt width: 800 mm, total length: 65,000 mm, total width: 80 mm, On behalf of a small shipping company, we are selling a belt conveyor system. The system contains the following components: 1. PVC belt conveyor 800 x 5240 mm - Quantity: 7 2. PVC belt conveyor 800 x 6240 mm - Quantity: 2 3. PVC belt conveyor 800 x 2900 mm - Quantity: 1 4. Idle conveyor with 90 degree rotation, 800 mm wide - Quantity: 3 5. Idle accordion conveyor 800 x 8000 mm + 5000 mm - Quantity: 1 6. Inclined conveyor + 8,000 mm tension roller accordion (inclined conveyor for truck unloading) 7. Control panel and speed control panel General features: - Black PVC belt, belt thickness: 3-4 mm, drum bearings from SKF, adjustable feet Purchase price in 2021 without installation costs: 104,000.00 € net Dqvmpn Condition: functional. Subject to prior sale. All information without guarantee. Inspection and loading is possible. Please discuss this with us.

Condition: excellent (used), operating hours: 2,658 h, Functionality: fully functional, pressing force: 71 t, bale weight: 600 kg, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale height: 720 mm, bale width: 1,100 mm, oil tank capacity: 1,250 l, net weight: 29,000 kg, nominal current: 200 A, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour Dqj8Kr bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2022, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 5861, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Brujtvix7H3 Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Ciacizrf Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2012, Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Pp29Nxntjf Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Communication Optional DeviceNet, Profibus MTBF > 71,949 hours at 30° C Conformity UL, cUL, CE, FCC (Class A), 21CFR1040, IEC-60825-1 Year of manufacture 2012 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: good (used), Year of construction: 2008, Metal detector Loma systems IQ3 Bq8Jsashwa Product dimensions: 435 x 80mm (w x h) Conveyor belt length: 1,800mm Conveyor belt width: 400mm

Year of construction: 2024, Condition: new, Functionality: fully functional, Dynamic washers are machines used to wash most lightly to moderately soiled and fragmented plastic waste such as: PP packaging, PVC PET bottles shredded big bags films such as LLDPE, HDPE, PP, PVC, PS, PA, fishing nets, household chemical waste and many others They are most often used after a pre-cleaning stage in pre-washers. Therefore, dynamic washers should not be used interchangeably with pre-washers for washing heavily soiled (in sand, stones, etc.) waste. The washers offered by the masses are simple to operate and reliable devices, which can be configured into a more effective washing - dynamic cascade system (tandem - 2 x 30 kW or 2 x 55 kW). Multi-point water dosing to the screen washers (cleaning system) and active dirt extraction ensure more efficient operation, while dynamic feed movement is possible thanks to the rotating impeller blades. The extended sieve section (1400 mm) considerably improves the washing quality and the drainage of excess water is ensured by the use of an acid-resistant steel sieve. The use of 2 sieve segments provides the washers with improved maintenance. Model -KL-MD/1000 Up93Lorwsv Motor power [kW] - 55 kW Film drying capacity [kg/h] - 1400 Milling drying capacity [kg/h] - 4500 In our offer you will also find: Complete systems for recycling plastics Mills Plasticizing systems, vibrating screens, centrifuges Washing lines (DWFS®) Granulation and extrusion lines Service and spare parts For more information on our range of products in this area, please visit our website

Condition: repair required (used), Year of construction: 2009, Functionality: fully functional, pressing force: 127 t, bale weight: 1,200 kg, filling opening width: 972 mm, filling opening length: 1,620 mm, bale height: 1,100 mm, bale width: 1,100 mm, oil tank capacity: 1,850 l, net weight: 50,000 kg, A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute. Technical data baler: Manufacturer BOA Type Impress D130.110.B.5-(5R).1.6 Year of construction 2009 Press power main press 127 tons Specific press capacity 10,7 kg/cm² Working pressure 280 bar Feed channel 1.620 x 972 mm (l x w) Press volume / cycle 4,1 cbm Dqj8K2 Volume throughput without load up to 865 cbm/hour Cycle time under operating conditions 22 sec. Press stroke 2.900 mm Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving power 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm up to 17 to/h bulk weight of 50 kg/cbm up to 29 to/h bulk weight of 100 kg/cbm up to 37 to/h bulk weight of 150 kg/cbm up to 51 to/h Bale weight up to 1.200 kg Volume hydraulic oil tank 1,850 L SPS controller Siemens S 7 Operating panel SiemensToughscreen Multi Panel Transport dimensions baler approx 12.741 x 2.400 x 3.360 mm (l x w x h) Machine weight baler approx. 50 tons Technical data for the conveyor belt Manufacturer BOA Type 1700 HBS 32° KTH 11000 x 13076 x 1500 Year of construction 2009 Drive power 11 kW Variable belt speed Feed conveyor length 11,000 mm Length of ascending belt 13,076 mm Pitch 32° Useful width 1,700 mm Height of side wall of infeed conveyor, inside 800 mm Height of side wall of ascending conveyor, inside 500 mm Pit dimensions to conveyor belt 14,616 x 3,550 / 2,150 x 1,750 mm (l x w x d) Comments: As you can see from the photos, this machine has some signs of wear that should be repaired and removed before it is used again. A basic maintenance and partial overhaul is recommended. The cylinder tube of the main hydraulic cylinder has a hairline crack and should definitely be replaced. The machine is expected to remain in single-shift operation until 03/2025 and will then be replaced by a new press with conveyor belt. An inspection of the machine during operation, including the use of materials, is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Functionality: fully functional, Year of construction: 2016, 2 x Case packing systems with bale arm tray palletiser's. Includes; Bqte2Xjwok 2 x CLP case packing systems previously used for heat sealed plastic trays. 2 x Dicoma bale arm tray palletiser's. 2 x Case packing systems tray de-nester's. Year on manufacture 2016 The machines can be sold as one or can be split into two individual lines.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Bzxs2Pqg9M Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: used, Omnidirektionaler barcode scanner X Cs2N3Xmr9S Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Delivery in Germany (without Islands): free incl. mains cable without software Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Flake ice machine on stand, can produce up to 2.5 tonnes per day of flake ice. Lovely condition. Cbl2R9Jet3

Year of construction: 2024, Condition: new, Functionality: fully functional, The machine is designed for drying plastics: soft and hard, among others: films e.g. : LLDPE, LDPE, HDPE, PP, PVC, PS,PA, post-agricultural films, agro-fibre, shredded big bags, PP bags, fishing nets, peat packaging, and many others Uqbrof9Vup We invite you to familiarize yourself with our range of KL-WIS drying centrifuges Model - KL-WIS/500 Motor power [kW] - 55 kW Film drying capacity [kg/h] - 1200 Milling drying capacity [kg/h] - 4500 In our offer you will also find: Complete systems for plastics recycling Mills Plasticizing systems, vibrating screens, centrifuges Washing lines (DWFS®) Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Condition: excellent (used), Instrument Systems Type: CAS 140C-154 Spectroradiometer Spectrometer for spectral light measurement The CAS 140CT is the only array spectrometer available on the market with a density filter wheel integrated into the device, which extends the intensity measurement range by 4 orders of magnitude. This means that both weak light sources and high radiation intensities can be measured fully automatically. Features: Several model variants from 200 to 2150 nm Cooled high-end back-illuminated CCD detector for maximum measurement sensitivity and signal stability Enormous intensity measurement range (9 decades) thanks to integrated density filter wheel Integrated dark current shutter Measurement times in the msec range Optional USB or PCI interface Software solutions for laboratory and production applications Applications: Complete solutions for testing LEDs, displays and flash lamps Spectroradiometry in the UV-VIS-NIR range Universal spectrometer for laboratory use Industrial production test Model CAS140CT-154 Spectral range [nm]     220 - 1020 Number of pixels 1024 x 128 Spectral resolution 3.7 [nm] Klniyi9B Data point interval 0.8 [nm] Condition: used Scope of delivery: (See picture) (Technical data is subject to change and errors, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2025, Condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Py3Hj33Re Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: new, Year of construction: 2024, Functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability The use of renowned drive components with a high degree of efficiency reduces operating costs while extending service intervals. Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Cccqifs Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg

Year of construction: 2024, Condition: new, Functionality: fully functional, A high-performance plastic washing and granulation line, designed for processing various materials such as PE, PP, HDPE, LDPE, LLDPE, PS, and ABS. This comprehensive recycling solution efficiently handles cleaning, drying, and granulation processes, ensuring top-quality recycled material. Each line is custom-designed to meet the individual needs of our clients, with capacities ranging from 300 kg/h to 2500 kg/h, providing the perfect fit for any production scale. The system is built for durability and ease of operation, making it ideal for both small and large-scale recycling facilities. Advanced technology maximizes productivity, minimizes energy consumption, and guarantees consistent results, offering a reliable and cost-effective solution to improve plastic recycling processes. We invite you to contact us for inquiries and quotes. Hu3Rvpg

Condition: new, Year of construction: 2024, Functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Uqb7Rtygir Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website