Used Schmalz Vacumaster Basic 90 for sale (12,824)

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Knedpfx Aov S Synomvjb Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: new, functionality: fully functional, Year of construction: 2016, machine/vehicle number: VM-BASIC-90-CON, Vacuum lift device unit for handling of windows. Load: 200 kg. Kodpjyngimsfx Amvjnb Dead weight: 114,88 kg. Four vacuum cups diameter 210 mm. Electrical vacuum pump. Acoustic warning for low vacuum. Electrical tiltable 90 degrees.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4462 / 4520, 1 Schmalz – Column-swiveling crane with extension + Vacumaster Comfort Window The crane is available in 2 identical units!!! Load capacity at full extension: 200 kg Schmalz swiveling crane SK-KZG-CON (extending crane) load capacity 200 kg with suction lifter VM-Comfort-H-CON Suction cup diameter: 37 cm! Load capacity: 150 kg Year of manufacture: 2018 Overall height: approx. 3.35 m, reach: approx. 3.1 m + 1 m extension = 4.1 m Distance from the base to the upper boom: approx. 2.63 m Distance from the base to the upper boom: approx. 2.42 m Hook height, chain hoist: approx. 2 m Maximum height of suction lifter in the center: 1.7 m Base plate: 50 x 50 cm Total weight: approx. 400 kg Connection: 400 V, 16 A, swiveling range: 270° The crane is disassembled and packed on a pallet. The item is located in 75053 Gondelsheim. Knodpfx Amozvrcaovsb Only the crane system shown in the pictures is being sold. Very good condition, almost like new. See pictures. Shipping by freight forwarder or collection by appointment.

Condition: good (used), functionality: fully functional, The Wittmann temperature control unit is for sale: Medium: Water Ksdpsztwt Eefx Amvonb Heating capacity: 9 kW Cooling capacity: 30 kW Mobile

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Kodpfx Amszx S D Aovonb Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: used, Year of construction: 2017, machine/vehicle number: 1739289, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Ksdpfjzzk Rmsx Amvjnb Mobile equipment cabinet Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be arranged by the buyer! The unit will be available from October 2026! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Kodpfx Aozx S Dvomvenb Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible Print Cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90 % RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90 % RH, non-condensing Placement: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Weight in operation: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lifting system Interchangeable Print Cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cable Ethernet cable USB stick User manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2645 /4434, Technical specifications: 1 Schmalz column-mounted swing jib crane, model NL 50KG, year of manufacture 2018 Crane is available in quantities of 2!!! Knjdpozvrn Aefx Amveb Load capacity at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for additional workshop tools) Overall height: approx. 2.52 m, outreach: approx. 1.8 + 1.25 m, lower boom: approx. 2.35 / 2.5 m Base plate: 30 x 30 cm Total weight approx. 300 kg including vacuum unit Connection to 400V 16A, swivel range 270 + 90° Crane is disassembled and packed on a pallet Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost new. See pictures Shipping via freight forwarder or collection by appointment.

Condition: ready for operation (used), Wittmann MTC Basic-C90 F27 Temperature Control Unit Single-Circuit Temperature Controller Price is for one unit. Several units available! Year of manufacture: 2017 Year of manufacture: 2017 Year of manufacture: 2018 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to schedule a viewing appointment. We can also organize affordable shipping for you! Kjdpfx Ameyw Rh Hovonb You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check our further offers. Company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data and errors in the item description may occur and are subject to change.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: VM-WO-250-90-0-2-AAM00064R, total length: 1,600 mm, load capacity: 250 kg, throat depth: 650 mm, Schmalz plate vacuum lifter, original packaging, year of manufacture 2024, with two suction pads, maximum plate load of 250 kg. Boom arm swivels 180°, up to 3500 mm. Suction plate design: transverse orientation. Suction pad length: 550 mm, width: 200 mm, quantity: 2 pcs. Accessories: Spiral hose for compressed air supply: 2500 mm, compressed air supply length to crane: 12 m, number of hose connections: 2 pcs. Weight: 0.00178 kg. Customs tariff number: 84289090. Country of origin: Germany. Knjdoycva Rjpfx Amvsb

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, For sale: a Schmalz vacuum lifter, Jumbo model, with a Joulin suction cup. It can be used with wet or frozen wood. Knedpfxszxp I Ee Amvob

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: TD2002, Schmalz Vacuum Lifter with 50kg Payload / Lifting Capacity Dimensions: 30 x 30 x 30 cm, Weight: 11 kg Equipped with 1 suction pad, approx. 150 mm diameter Ksdpfx Aoupyn Rjmvsnb 1 compressed air connection Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only

Condition: new, Year of construction: 2021, Brand-new stone processing machine. Numerous accessories, including a vacuum system and stone milling bits. Knodpfxjztptkj Amvjb The kit includes everything needed to get started. Thank you.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, For sale: a Hammer K3-Basic panel saw. This machine has been used in our showroom as a demonstration model. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Tilting circular saw 90-45° - Sliding table 800 mm - Miter fence 900 mm - Cutting width 700 mm - 3 kW (4 hp) motor / 400 volts The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For information, call: 03137-3109 Knedpjzn I D Dofx Amveb Related terms: circular saw, saw, table saw Reference: R-D1618

Condition: used, machine/vehicle number: 008702, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Kedpfjzq Urgex Amvonb Vacuum feed belt: yes No. Operating units: 3 Nr

Year of construction: 2005, condition: used, functionality: unexamined, Two identical vacuum tube lifters from Schmalz, model JumboErgo 35, are for sale. Each unit includes a vacuum pump, control handle, hose package, and other accessories as shown in the pictures. Kodpfxozyk R Rs Amvenb These systems are suitable for the ergonomic lifting and moving of suitable wood panels, wood-based materials, and other flat components. The suitability depends on the material, surface, and the suction gripper used and must be checked before use. Technical specifications: Manufacturer: Schmalz Model: JumboErgo 35 Type designation: JUMBOERG35-DUMM Year of manufacture: 06/2005 Maximum lifting capacity: 35 kg Weight according to nameplate: 60 kg Includes vacuum pump Includes control handle and hose package Two identical units available Scope of delivery as shown in the photos Condition The devices were purchased by us as part of an industrial auction but were not subsequently used in operation. A complete functional test has not yet been carried out. The sale is therefore made in the existing, used, and untested condition. Signs of wear and tear due to age and use are present. An inspection and testing on-site is possible after prior appointment and is expressly desired. Price Price per unit: €1,500.00 net, negotiable plus 19% VAT = €1,785.00 gross Package price for both units: €2,800.00 net, negotiable plus 19% VAT = €3,332.00 gross The sale is made by a commercial seller. An invoice with VAT will be issued. Location: 35110 Vöhl-Altenlotheim Collection and assistance with loading are possible by arrangement.

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Eco-filter system for best cleaning results through warmer and filtered tank water Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Knodpfx Aezzlntemvsb Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Year of construction: 2007, condition: used, Colour: Grey Empty weight: 500 kg Dimensions (LxBxH): 270 x 70 x 246 cm - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No Ksdpfx Aswh Nfrjmvenb - Serial number: 13.02.01.10372/1 - Transport dimensions: 2700mm x 700mm x 2460mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 2011, Baumann Wohlenberg cutting system Knodpfx Aoz D Dmqemveb 92-series cutting machine with chip removal and conveyor belts from 2017 The unloader is about 10 years older than the machine The vibrating table is about 20 years older than the machine The package includes a total of 4 blades All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Knedpfxjzzrute Amvob Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: osa A 105°+ osa B 90°, spindle speed (max.): 3,500 rpm, spindle speed (min.): 3,500 rpm, table width: 800 mm, table load: 8,500 kg, table length: 3,000 mm, table height: 1,000 mm, total height: 3,400 mm, total width: 4,360 mm, total length: 7,760 mm, type of input current: three-phase, rotational speed (max.): 3,500 rpm, workpiece weight (max.): 8,500 kg, overall weight: 18,000 kg, year of last overhaul: 2025, spindle motor power: 22,000 W, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, FSQ 80(100) S/A3 CNC - TOS KUŘIM Bed Milling Machine, Table Length 3m Control System: Heidenhain 415F Complete Mechanical Overhaul: 2024 Availability: IMMEDIATE DELIVERY Warranty: 6 months FSQ 80(100) O/A3 CNC – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 7,760 mm Overall width: 4,360 mm Overall height: 3,400 mm Total weight: 18,000 kg Total power consumption: 40 kVA Working range: Longitudinal travel X-axis: 3,000 mm Cross travel Y-axis: 1,000 mm Vertical travel Z-axis: 900 mm Spindle head (S Head): Max. power: 22 kW Speed range: 16 – 3,500 rpm Number of speed ranges: stepless Spindle rotation around A-axis: 105° Spindle rotation around B-axis: 90° Knjdpfxsxp Dkcj Amvjb Feed range X – Y / Z: Number of speed ranges / range: stepless / 1 – 5,000 mm/min Rapid traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table area: 800 x 3,000 mm Max. load: 8,500 kg Control System: Heidenhain 415F Further details on request.

Condition: like new (used), Year of construction: 2020, operating hours: 110 h, functionality: fully functional, working width: 850 mm, area performance: 4,100 m²/h, overall weight: 340 kg, input voltage: 24 V, tank capacity: 130 l, total height: 1,380 mm, total width: 810 mm, total length: 1,460 mm, water tank capacity: 110 l, battery voltage: 24 V, battery capacity: 180 Ah, rotational speed (min.): 170 rpm, empty load weight: 220 kg, For sale in new condition Hyper Xtreme 4100m2/h ride-on floor scrubber dryer Weidner BS1 08500BF / HYPER XTREME 4100 (Basic) For sale in new condition with 104 operating hours, 4100m2/h capacity ride-on floor scrubber dryer, with suction. year of manufacture:2020 Scrub width: 850 mm Suction head width: 900 mm Max working capacity: 4100 m²/h Detergent tank capacity: 110 liters Waste water tank: 130 / 155 liters Speed: 170 Brush pressure: 50 kg Knedozf Ix Aopfx Amveb Vacuum motor: 480 watts Brush motor power: 2 x 400 W Pressure / vacuum motor: 1300 / 400 mm Traction type / Power: Front motor wheel / 600 W Pressure / vacuum motor 1300 mmH2O / 400W Dimensions / weight: 146x81x138 cm / 220 kg Electrical system: 24 V Automatic battery charger 24v 4 x 6 V / 240AH working battery dimensions: 146x81x138 cm Weight without battery: 220kg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: DN855, Technical data: 1 Schmalz – Column-swiveling crane NL 50KG – Year of manufacture 2023 Payload at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for other tools) Overall height: approx. 3.75 m, extension: approx. 4.6 m, lower arm extension: approx. 3.2 m Lifting height: approx. 0.25 m – 2.2 m Base plate: approx. 50 x 50 cm Total weight approx. 300 kg including vacuum unit Kodjzv Ekdopfx Amvsnb Connection to 400V, 16A, swiveling range 270° Crane is disassembled and packed on a pallet Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition – almost new. See pictures Shipping via freight forwarder or collection by appointment

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm Kedpey Nnnnofx Amvenb - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DN2383 / 2368, 1 Schmalz Column Swivel Crane 2 cranes available! Height 4.8m, length 3m, upper carriage boom 4m, hook height 3.6m Load capacity at full extension 350 kg Total weight approx. 500 kg including anchor plate 75x75 cm with 500 kg Schmalz chain hoist with floor control (with 2 lifting speeds) Ksdpfxozvuldj Amvonb Connection to 400V 16A, swivel range approx. 270° Crane is disassembled and packed on a pallet Very good condition, almost new. See pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection by appointment