Used Network for sale (712)

Condition: excellent (used), functionality: fully functional, Chiller - Emerson Network Power chilled water unit Gusdpfx Aswplwgscfoc Brand Emerson Network Power Cooling capacity 1300 kW Dimensions 13.5×2.50×2.40 m The device is characterized by high cooling capacity, which allows it to be used in demanding environments where reliable heat dissipation is necessary.

Condition: excellent (used), emtest / AMETEK Automotive EMC Testing and Simulation System Manufacturer: emtest / AMETEK System: Automotive On-Board Network and EMC Testing System For sale is a professional testing and simulation system for automotive, electronics, and EMC applications. The system is housed in a mobile 19" industrial cabinet and consists of several testing and simulation modules, including control software. System Components AutoWave Serial number: P2133255901 VDS 200Q100.2-400 Voltage Drop Simulator Serial number: P2135256067 PFM 200N100.1 Serial number: P2124253356 Software autowave.control V7.4.5 Software license included The software is used to control the AutoWave system and the connected components. Communication is via Ethernet. A laptop or PC is not included in the scope of supply. Interfaces Ethernet IEEE 488 USB Frame Bus In / Out Analog In DC Output connections CEE power connection Emergency stop switch Application Areas Automotive on-board network simulation Voltage dip tests EMC testing Electronics and component testing Research and development Quality assurance Technical Notes Four-quadrant voltage drop simulator Suitable for automotive testing profiles Supports common testing standards such as LV124, LV148, ISO 7637-2, and ISO 16750. Output range according to documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition Used equipment from industrial use. Optical condition, see pictures. The device can be switched on, displays are active. A complete technical functional test under load has not been carried out. Sold as a used industrial testing system. Scope of Supply emtest / AMETEK testing system in an industrial cabinet AutoWave module Gjdpfx Ajy Rlbhocfouc VDS 200Q100.2-400 module PFM 200N100.1 module Software autowave.control V7.4.5 Software license Connection and fan units Accessories as shown in the pictures Inspection possible by arrangement. Loading can be organized. All information provided to the best of our knowledge. Errors, changes, and prior sale are reserved.

Condition: used, functionality: fully functional, Kannegiesser Article number 0541540 Channel 1 MDI/MDIX Godpfx Acjy Ug Dfjfsuc

Condition: good (used), Year of construction: 2006, Year of construction: 2006 Inlet width: max 480 mm; min 150 mm Inlet length: max 320 mm; min 80 mm Guedpfx Acoqrq Saofsc Inlet height: max 650 mm; min 450 mm Product thickness: max 60 mm Speed: max 160 m/min

Condition: good (used), Mains choke, mains filter, frequency converter, frequency transformer, drive converter -Siemens 6SL3000-0BE25-5DA0 Basic Line Filter for 55kW AIM/ALM -Max. power: 55 kW -multiple filters available Price: per piece Godpfxjb A Itgj Acfouc -Dimensions: 470/100/H225 mm -Weight: 10 kg

Condition: good (used), Network, communication, LAN/modems -Type: AT-GS900/16 -Connections: 16 pieces Gujdjb S Htfepfx Acfoc -Weight: 2.5 kg

Condition: good (used), Line choke, air gap choke -Type: ELN1-0900H005 -Price: per piece -Quantity: 6x Available -Weight: 1 kg Guedpfx Ajb A Sc Iocfec

Condition: used, functionality: unexamined, Ferwood Code: RU0008254 - Manufacturer Code: B84111-A-B110 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Guodpfxov Hgg So Acfjc

Condition: used, functionality: unexamined, Ferwood Code: RU0011599 - Manufacturer Code: NHD400/24 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Guedpfx Ajwrzllocfsc

Condition: used, functionality: unexamined, machine/vehicle number: OneAdvisor 800, Used Viavi OneAdvisor 800 network analyzer set in carrying case. Manufacturer: Viavi Solutions Model: OneAdvisor 800 Including, among other items: charging cable, optical connector cleaner, universal adapter, and documentation. Manufacturer description: The VIAVI OneAdvisor 800 distinguishes itself with a sophisticated design and a multifunctional architecture that accommodates a wide range of test applications, effectively scaling to different user groups and deployments, including: General Purpose Spectrum Analyzer: Designed for laboratory and manufacturing environments, the OneAdvisor 800 serves as a robust RF testing tool. It provides comprehensive spectrum analysis capabilities, enabling precise measurement and analysis of RF signals across various frequency ranges. This is essential for regulatory compliance and optimizing RF performance across operating conditions. Fiber and Cable Verification: For radio and antenna system installations, the OneAdvisor 800 is critical for verifying fiber and cable connectivity. It performs thorough tests ensuring seamless integration and optimal functioning of these components. By validating fiber links and cable connections, it guarantees reliable signal transmission, improving overall system efficiency and reliability. Wireless Signal Quality and Coverage Assessment: For mobile network testing, the OneAdvisor 800 offers vital tools for evaluating signal quality and coverage. It conducts detailed measurements to assess signal strength, identify coverage gaps, and check network performance metrics. This supports network optimization, troubleshooting, and improved user experience by maintaining consistent connectivity and service quality. Detection and Location of RF Interference Signals: In wireless networks, the OneAdvisor 800 excels at detecting and pinpointing sources of RF interference. It uses advanced analysis to identify and locate signals that adversely affect network performance. Prompt identification allows for swift mitigation of interference, ensuring optimal network reliability and performance. Gsdexmh E Sepfx Acfouc Transport Network Validation: The OneAdvisor 800 extends its capabilities to validating transport networks, supporting bandwidth provisioning in Ethernet networks up to 100Gbps. It conducts in-depth tests for network throughput, latency, and packet loss, ensuring robust performance and adherence to service level agreements (SLAs). It also enables precision time protocol (PTP) validation, vital for synchronization in 5G radio X-Haul networks, ensuring smooth integration and operation of advanced 5G infrastructure. The VIAVI OneAdvisor 800 offers versatility and dependability, providing an all-in-one solution for diverse testing requirements across industries and user types. Its comprehensive features—ranging from spectrum analysis to interference detection and transport network validation—make it an essential tool for network performance optimization, quality assurance, and supporting next-generation communication technologies such as 5G.

Condition: good (used), Year of construction: 2020, 100096365V02 EP-B101 PIF/Network-Interface second-hand, tested, from 2020 Godpfx Aowu Emrscfouc

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 80.4308.0097, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, controller model: FANUC Professional 3, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 900 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 970 mm Pallet size: 630 mm × 630 mm Number of pallets: 2 Maximum workpiece weight: approx. 1,200 kg Spindle interface: HSK-A100 Maximum spindle speed: 12,000 rpm Tool magazine: 188 positions Tool change time: approx. 1.7 s Rapid traverse: up to 50 m/min MACHINE DETAILS Control system: FANUC Professional 3 Machine weight: approx. 18 t EQUIPMENT Dual-pallet system Large 188-position tool magazine Automatic tool changer Through-spindle coolant / coolant system Guedezb Efyjpfx Acfjc Chip conveyor NC rotary table Network/DNC connection

Condition: used, Spinner MICROTURN 52 LTBS Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles AUTOMATION READY - MC0122 Less than 300 hours No bar feed Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling Chucks etc. included Yes Coolant: used Water Based What kind of facility is it in? R and D for performance parts for injector and turbos Specifications Work Area: Swing Diameter: 23.9 in (608 mm) Turning Diameter (max): 5.9 in (150 mm) Turning Length(max): 9.8 in (250 mm) Travels: X: 23.6 in (600 mm) Z:13.8 in (350 mm) Y1 Turret: +/- 1.9 in (50 mm) Y2 Milling Spindle: +/- 1.9 in (50 mm) B Rotary: 180 degrees Feedrate: Rapid Traverse X: 944.8 ipm (24 m/min) Rapid Traverse Y: 590.6 ipm (15 m/min) Rapid Traverse Z: 944.8 ipm (24 m/min) Spindle #1 Left / #2 Right: Liquid cooled motorized spindle with C-axis servo drive and encoder for synchronous machining. Spindle Bore Capacity: 52mm (2.0 in) Speed: 5,200 rpm Performance (S6 40%): 22.1 hp (16.5 kW) Torque (S6 40%): 81.1 ft-lb (110 Nm) Spindle Nose: DIN 55026-A6 B-Axis Milling Spindle: Speed (max): 12,000 rpm Performance (S6 40%): 12 hp (9 Kw) Torque (S6 40%): 15.4 ft-lbs (21 Nm) Swivel Angle: +/- 180 degrees Positional Measurement: Rotary Encoder Clamping: Hydraulic Turret: Stations: 12 / BMT45 Live Tooling Speed: 8,000 rpm Performance (S3 25%): 5.8 hp (4.3 kW) Torque (S3 25%): 10 ft-lb (13.6 Nm) Tool Magazine: Guedpfx Asyzkdcecfjc Station Quantity: 72 Holder Type: HSK40 Tool Length (max): 4.1 in (105 mm) Tool Diameter (max): 3.5 in (88 mm) Tool Diameter (max) - Adj Pocket Empty: 3.9 in (100 mm) Size & Electrical: Technical design according to CE standards. Machine Dimensions: 119.3 in (3030 mm) x 111.8 in (2840 mm) x 113.8 in (2890 mm) Machine Weight: 16,976 lbs (7,700 kg) Operating Voltage: 3 x 400V (+/-10%) Main Frequency: 60 Hz (+/- 2%) Electrical connection: TN network (5-wire) Standard Equipment • 72-station tool magazine mounted on top of the machine • Hydraulic spindle brake on spindle 1 • Hydraulic spindle brake on spindle 2 • Spindle rinsing on spindle 1 (switchable between coolant or compressed air) • Spindle rinsing on spindle 2 (switchable between coolant or compressed air) • CNC Clamping Force Setting on Spindle 1 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • CNC Clamping Force Setting on Spindle 2 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • Linear tool slide with coolant supply • Signal lamp • Rear exit chip conveyor - includes feed pump rated at 5 bar at 20l/min or 3.7 bar at 83l/min • High pressure coolant system with additional 61 gallon (230 liter) tank. Maximum 319 psi (22 bar) • Renishaw tool probe for measuring tools in the X/Y/Z axis • Preparation for mist collector unit • Automatic operator door that opens at the end of the program and closes with the start. Includes necessary safety technology. Suitable for manual loading or automation access. • UNIROB universal robot interface via a common plug on the machine control cabinet with the following signals: • Safety signals (emergency stop/door signals, etc.) • Standard signals via Profinet PN bus coupler on RJ45 module. Otherwise according to the Unirob-V2021 functional description CNC Control System

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade Guedpfxjzc Rv He Acfoc - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: ready for operation (used), Year of construction: 2018, punching force: 17 t, sheet thickness (max.): 6 mm, number of axes: 3, This 3-axis TRUMPF Trupunch1000 S05 was manufactured in 2018. It features a working area of 2500 x 1250 mm and is equipped with maintenance-free three-phase motors. The machine includes a linear magazine with 20 stations for clamps and tools, and an electro-hydraulic punching head with programmable features. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trupunch1000 S05 CNC punching machine we have for sale. Contact us for further details. Gusdpfx Acozc R Enofoc - Working Area: 2500 x 1250 mm (Medium Format)- Drives: Maintenance-free three-phase motors- Frame: C-frame- Tool Storage: Linear magazine with 20 stations for clamps and tools- Clamps: 2 hydraulic sheet clamps- Punching Head: Electro-hydraulic punching head, rotating mono-tool adapter, programmable stripper position, tool length compensation, slug extraction- Functions: Forming, MultiTool, MultiBend, Thread forming with tap breakage control, Signing / fast beading- Control: TRUMPF control based on Rexroth IndraMotion MTX- Interface: USB interface, RJ45 network connection, Wireless Operation Point (VOS basis)- Table Type: Ball table with brush inserts- Safety: CE marking, multi-beam light barriers, rapid drive shutdown- Frequency: 50 Hz- Voltage: 400 V- Included Accessories: 18 original Trumpf tool cassettes (including 10 RTC-cassettes 2017 with die plates from original order), extensive selection of punching tools, and a Trumpf "quicksharp" punch grinding machine (YOM 89)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,000 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WinMax / MAX5, table width: 508 mm, table length: 760 mm, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details. Godpfx Acjzc Rziofouc - Tool Holder: SK40 / CAT40- Max. Torque: 95 Nm- Max. Tool Diameter: 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 7 kg- Rapid Traverse X/Y: 38 m/min- Rapid Traverse Z: 32 m/min- Additional Equipment: Automatic centralized lubrication, Chip flushing system, Scraper belt conveyor, Coolant unit, Electronic handwheel, Network connection- Included in Delivery: CNC milling machine Hurco VMX 24i- Excluded Items: Vise, tools, clamping devices, other accessories

Condition: used, mileage: 215,000 km, power: 95 kW (129.16 HP), first registration: 09/2009, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Now chat via WhatsApp: Contact our sales advisor quickly and easily. Attention!!! Sale primarily to commercial customers only? Internal ID number: [3337] ----Optional services: * 12–64 month warranty (valid EU-wide) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available with or without down payment * Tow bar/reversing camera can be retrofitted upon request * Spring offer: Upon request and with an extra charge of only €999, towing capacity can be increased to up to 3,500 kg (depending on vehicle and manufacturer). ----Vehicle highlights: * 19% VAT deductible * German vehicle * Regularly maintained * Immediately operational * Former prisoner transport vehicle with three individually ventilated and illuminated cells, pre-installed radio equipment, blue stripes all around, cargo area roof ventilation. Special equipment: Auxiliary heater, automatic climate control, reversing camera, 1 DIN slot at the front under the headliner, passenger airbag, antenna for GSM, GSP, and UMTS network, external temperature display, 100 Ah battery, additional (reinforced) battery, single-pole battery master switch, 180 A alternator, rear doors (270-degree opening angle), wooden floor in the cargo area, head airbag system (windowbag), fuel filter with water separator, metallic paint, Parktronic System (PTS), spare wheel in regular tires, spare wheel holder under rear frame incl. jack, heated co-driver’s seat, heated driver’s seat, reinforced rear stabilizer, reinforced front stabilizer, reinforced shock absorbers, sender for additional heater, split relay for additional battery, reinforced front axle, additional air heater with timer. Further features: 3rd brake light, adaptive brake light, driver airbag, washer fluid level indicator, both exterior mirrors electrically adjustable and heated, exterior mirrors with integrated indicators, brake assist, braking system with ABS + ASR, roof lining in the driver’s cab, lockable glove compartment, body/chassis: high-roof panel van standard, child safety lock, main fuel tank: 75 l, solid cargo partition, load securing / lashing eyes, headlamp range control, engine 2.1 l – 95 kW CDI CAT (2143 cc), wheelbase 3665 mm, low emission per Euro 5, sliding door to load/passenger area right, adjustable co-driver's seat, service interval display Assyst, heat-insulated glazing, gross vehicle weight 3.5 t. ----Leasing or financing required? We offer attractive offers – also possible without a down payment! Contact us for details. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 Gusdpoy Nvn Nofx Acfjc 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ----Note: All information published online is non-binding and serves only as a general description of the vehicle. Subject to errors, typographical mistakes, and pre-sale. The binding condition of the vehicle is determined solely by the purchase contract on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our business customers.

Condition: good (used), Year of construction: 2023, CNC multi-axis turning center Manufacturer: Hyundai WIA Type: LM1800TTSY Control: Siemens 840D Shopturn with 3D simulation Year of construction: 2023 Technical data: Incline bed design with box guide in X/Y axis, Z-axis with linear guide Counter spindle and twin turret system Travel distances: X/X1: 165 / 195 mm Z1/Z2: 700 / 720 mm ZB: 668 mm Y: 100 mm Rapid traverse rates: X/Y/Z: 20 / 7.5 / 40 m/min Max. turning diameter: 230 mm Max. turning length: 673 mm Spindle nose: A2-6 Spindle bore / bar capacity: 76 / 65 mm Spindle speed: 5,000 rpm (both spindles) Drive power: 2x 22 / 11 kW Turret & milling unit: 2 turrets each with 12 stations (optional 24) System: BMT55P Milling drive: Gedoy Hfrlepfx Acfjuc Speed: 5,000 rpm Power: 5.5 / 1.1 kW Equipment: Automatic measuring arm Coolant tank 270 liters Direct path measuring system (X1/X2, Z1/Z2, Y) Temperature compensation for coolant (with air conditioning unit) High-pressure cooling 20 bar Chip conveyor (belt conveyor) Siemens network extension Bar loader interface Extensions & accessories Software & electrical: ShopTurn with 3D simulation Machine transformer Measuring & automation technology: Automatic Q-Setter Renishaw Linear positioning sensor (for main and counter spindle) Workpiece handling: Part catcher for main spindle Part catcher for counter spindle with belt discharge Workpiece ejector Clamping technology: Spanntop mini from Hainbuch Main spindle (AX puller size 65) Counter spindle (AX fixed size 65) Peripherals: Bar loader magazine Sprint 565 S2 from LNS For bars up to 3,000 mm length Diameter: 5 – 65 mm Reduction sleeve set (various diameters) Extraction system Purchase price in 2023: 330,000 Euros The machine has been little used and is in very good condition.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Technical specifications: Main saw blade diameter (mm): 550 Panel cutting with pull-out fence and sliding table 3200 mm: 3200x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scoring blade motor power [S6 -40%] Hz50 kW: 9 Cutting width at rip fence (mm): 1000 Standard equipment and accessories: - Optimizer/processing control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machinery fleet and materials or panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), and import cutting lists * Optimize cutting lists by selecting one or more proposals from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to the simple and intuitive graphics of the 3D sequencer that guide the operator through every step * Print barcode labels for marking different parts via Bluetooth with compatible label printers - 10-year warranty on the sliding carriage system - Maximum saw blade diameter: * Up to 450 mm with scoring saw blade mounted * Up to 550 mm without scoring saw blade - eye-S 15" electronic control system including: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Rip fence adjustment - Scoring blade height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cutting operations * Storage capability for up to 1000 programs with corresponding images * Storage for up to 1000 different tools with corresponding images Guodpfx Acsxavrgsfjc * Cutting sequence management for preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut App * USB port * Prepared for network connection - Auxiliary function of the electronic control system, including: * Determination of the correct stop position on the longitudinal fence for panel machining with tilted saw blade * Determination of the correct stop position on the longitudinal fence for angle cuts with the mitre fence on the work table with or without tilted saw blade - Swivelling control panel above table

Condition: ready for operation (used), Year of construction: 2017, operating hours: 19,295 h, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, controller manufacturer: TRAUB, controller model: TX8i-s, number of axes: 9, This 9-axis TRAUB TNL32-9 was manufactured in 2017. It features a main spindle speed of 8,000 rpm and a counter spindle speed of 6,400 rpm. The machine includes dual drive systems and a maximum bar capacity of 32 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL32-9 swiss type turning machine we have for sale. Contact us for further details. • Main Spindle: Motor Spindle • Main Spindle Bore: 32 mm • Main Spindle C-Axis: Yes • Counter Spindle Bore: 30 mm • Counter Spindle Speed: 6,400 rpm • Upper Tool Carrier: X / Y / Z / H Axis • Lower Tool Carrier: X / Y / Z / H Axis • Tool Positions Upper Carrier: 10 • Tool Positions Lower Carrier: 10 • Dual Drive System: Yes • Long Turning Mode: Yes • Short Turning Mode: Yes • Changeover Turning Mode (W-T): Yes • Internal Coolant Pressure: 20 / 80 / 120 bar • Coolant System: Bürener ECO Fluid • Coolant Tank Capacity: 600 l • Oil Mist Extraction System: Yes • Air Flow Capacity: approx. 1,500 m³/h • Automatic CO₂ Fire Extinguishing System: Yes • Hydraulic Workpiece Gripper: Yes • Counter Spindle Parts Ejector: Yes • Parts Conveyor: Yes • Tool Monitoring System: Yes • Network Interface RJ45: Yes • Voltage: 400 V • Frequency: 50 Hz • Rated Power: 36 kW • Connected Load: 44 kVA • Rated Current: 63 A • Maximum Fuse Protection: 63 A • CE Marked: Yes • Bar Feeder: FMB LSK38 / 3200 C • Bar Diameter Range: 5 - 38 mm • Maximum Bar Length: 3,200 mm • Remnant Length Disposal: up to 600 mm • Feed Direction: Right Side • Material Support Position: Front • Chip Conveyor: Optional, not included Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Guodpezcyabjfx Acfec Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2010, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm Gsdpfx Acex D I H Defsuc • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 5,000 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,580 mm, spindle motor power: 29,500 W, total height: 2,115 mm, total width: 1,980 mm, overall weight: 8,500 kg, product length (max.): 5,750 mm, number of axes: 3, This 3-axis SPINNER TC800L 110 was manufactured in 2023. The machine is fully functional and includes a steady rest, tailstock, chip conveyor, and oil mist extraction system. It operates on a 3-phase power supply at 400 V. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800L 110 horizontal turning machine we have for sale. Contact us for further details. • Status/condition • Machine powered on and still in operation • Fully functional; steady rest requires sensor bang-up replacement • Configuration and capacities • Turret without AgW (adjustable power supply) • Turret type: axial/radial • Number of tool stations: 12x VDI50 (option: 16x VDI40 or 12x BMT65) • Tool holder type: VDI50 (option: VDI40/BMT65) • Number of driven tools: 12 (option) • Driven tool speed: 4000 rpm • Driven tool power (S1/S3): 2.2 / 5.5 kW • Driven tool torque (S1/S3): 17.5 / 43 Nm (axial), 14 / 35 Nm (radial) • Maximum turning diameter: 500 mm • Maximum swing diameter: 800 mm • Turning length: 800 mm / 1580 mm (L version) • Distance between centers: 800 mm / 1580 mm • Maximum workpiece weight: 800 kg • Axes • Rapid traverse X/Z: 15 / 24 m/min • Spindles • Number of spindles: 2 • Main spindle • Nose: A11 • Bar capacity: 110 mm • Torque (100% / 40%): 175 / 235 Nm • Torque gear stage 2: 700 / 939 Nm • Sub spindle (option) • Nose: A6 • Bar capacity: 52 mm • Chuck size: 210 mm • Power (S1/S6): 15 / 19 kW • Torque (S1/S6): 95 / 121 Nm • Tailstock (if equipped) • Pinole diameter: 110 mm • Taper: MK4 • Stroke: 100 mm • Thrust force: 850 daN Guedpfjyyzucsx Acfoc • Fluids and tanks • Coolant tank capacity: approx. 235 l (up to 270 l in L-version) • Hydraulic tank: approx. 31 l • Central lubrication tank: approx. 2–3 l • Electrical data • Electrical connection: 3-phase 400 V + N + PE • Frequency: 50/60 Hz (also stated as 50 Hz) • Rated current: 44 A • Fuse protection current: 50 A • Rated current protection: 63 A • Connected load: approx. 40 kVA (up to 50 kVA with 2 spindles) • Protection class: BA 3 (Chap. 3.4.5) • Network type: TN network with grounded neutral point • Recommended protection: without FI switch (recommended) Additional equipment • Steady rest (note: sensor bang-up replacement needed) • Tailstock • Chip conveyor • Oil mist extraction system • Possibly chuck and tool holder (to be confirmed) Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2016, 2x screw compressors, Kaeser, 10 bar, with integrated refrigerant dryer, compressed air tank, SIGMA AIR MANAGER 4.0 control system – used: Gsdpozbyd Rsfx Acfeuc Price per compressor, ex-works: €5,950 (net), dismantled, packaged, and loaded! Price for the compressed air tank, ex-works: €1,450 (net), dismantled, packaged, and loaded! SIGMA AIR MANAGER 4.0 main control system, price ex-works: €2,500 (net)! Price for the complete system (2x compressors, 1x compressed air tank, 1x SIGMA AIR MANAGER 4.0 control system) = only €13,500 (net)! Manufacturer: Kaeser Type: SK 25 T Year of manufacture: 2016 Serial No.: 7201 Material No. SK.2 Operating hours: unknown, will be provided later Rated power: 15.0 kW Motor speed: 2,960 1/min Max. operating overpressure: 11.0 bar Dimensions (according to manufacturer's data sheet) W x D x H (mm) 750 x 1240 x 1260 Option K1 T2 C3 Option K1: Special coolant filling Option T2: Transformer / voltage adjustment Option C3: Connection of the control system (Sigma Control 2) to higher-level control or remote monitoring systems SIGMA AIR MANAGER 4.0 main control system: Control of compressed air stations – for optimum efficiency. Adaptive, efficient, and networked – with the SIGMA AIR MANAGER 4.0, demand-oriented compressed air management gets a new name. The compressed air management system controls the operation of several compressors as well as dryers or filters with unprecedented efficiency. Compressed air tank (data still to be verified) Kaeser, 1000L, max. operating pressure: 11 bar Condition: good Available: from Q4/2026 Location: Hamburg

Condition: ready for operation (used), Year of construction: 1999, operating hours: 52,732 h, spindle speed (max.): 14,000 rpm, overall weight: 17,500 kg, table width: 700 mm, table length: 2,000 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, table load: 1,200 kg, number of axes: 5, This 5-axis Huron EX-C was manufactured in 1999. It features a clamping surface of 2000 mm x 700 mm and a maximum table load capacity of 1200 kg. The machine offers impressive X-axis travel of 1600 mm, Y-axis travel of 800 mm, and Z-axis travel of 600 mm. If you are looking to get high-quality machining capabilities, consider the Huron EX-C universal machining centre we have for sale. Contact us for further details. Gusdpszbr Unsfx Acfoc - Spindle Taper: HSK-A 63- Work Feeds: 1-30000 mm/min- Rapid Feed: 30000 mm/min- Total Installed Power: 60 kW- Machine Weight: 17500 kg (18 Tonnes gross)- Short Circuit Power: 5.5 kW- Electrical Supply: 3 x 400 V- Frequency: 50 Hz- Maximum Power: 60 kW- Cable Cross Section: 35 mm²- Network Type: TN Schema- Coolant Tank: Included- Overhead Chip Conveyor: Included- Maintenance/Repair History:* 2025: Y-axis feed spindle with bearings and mounting parts replaced.* 2024: X-Y axis roller shoes replaced, X-axis linear guide replaced, geometry realigned, Z-axis roller shoes, Y-axis roller shoes.

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle Gujdpfx Acey Ehcdofsc - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -