Used Material Testing for sale (25,148)

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, ZwickRoell Z100 THW Allround Table Top Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Year of Construction: 2024 Machine Type: Electromechanical Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a like-new ZwickRoell Universal Testing Machine, Type Z100 THW Allround Table Top, manufactured in 2024. The machine is suitable for highly precise tensile, compression, bending, and material tests in research, development, quality assurance, laboratories, and industrial applications. The testing system is equipped with a 100 kN XforceK load cell, state-of-the-art measuring and control technology, and comprehensive documentation, including operating instructions, testing, and calibration documents. Technical Data: Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Article Number: 3023272 Works Number / Serial Number: 746182 Year of Construction: 2024 Testing Force: 100 kN Test space height (bottom): 1,285 mm Test space height (top): 1,400 mm (with additional cross member) Test space width: 1,040 mm Cross member speed: 0.0001 to 1,500 mm/min Return speed: max. 2,500 mm/min Control deviation: max. 0.05 % Stroke resolution: 0.484471 nm Positioning accuracy: ±2 µm Control cycle: 1,000 Hz Power connection: 400 V / 3-phase / N / PE Mains frequency: 50 / 60 Hz Current consumption: max. 9 A per phase Power consumption: approx. 6 kVA Protection class: IP32 Load Cell: Manufacturer: ZwickRoell Series: XforceK Serial Number: 832082 Nominal force: 100 kN Nominal sensitivity: 2 mV/V Dimensions: Load frame height: 1,769 mm Overall height with base frames: 1,884 to 2,694 mm Width: 1,360 mm Width with base frames: 1,536 mm Width including machine electronics: 1,729 mm Depth with base frames: 781 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 215 kg Base frames: approx. 34 kg System weight with typical components: approx. 315 kg Maximum total weight according to nameplate: 385 kg Equipment: Electromechanical two-column testing frame 100 kN XforceK load cell Electronic measuring and control technology Programmable test sequences Digital measurement data acquisition Mechanical holding brake Control panel with emergency stop Original ZwickRoell operating manual Testing and calibration protocols Measurement process capability studies (Cg/Cgk) Calibration markings present CE marking Accessories as shown in the pictures Condition: Used Year of construction 2024. The machine is in very good condition. Testing, maintenance, and calibration documents are available. Optical condition as shown in the pictures. Scope of supply: ZwickRoell Z100 THW Universal Testing Machine 100 kN XforceK load cell Original operating manual Dusdpfx Aszktr Sjhbew Testing and calibration documents Documentation Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), INSTRON 4507 Universal Testing Machine Manufacturer: Instron Limited, High Wycombe, England Type: 4507 Machine Type: Electromechanical Universal Testing Machine / Material Testing Machine Maximum Test Force: 200 kN For sale is a used electromechanical universal testing machine, INSTRON 4507, series 4500. The testing system is suitable for tensile, compressive, and material testing of metals, plastics, composite materials, and other materials. The system features a microprocessor-controlled load frame, separate control cabinet, operator console, industrial PC, and extensive accessories as shown in the images. Technical Data Manufacturer: Instron Limited Series: 4500 Model: 4507 Country of Manufacture: Made in England Maximum Static Test Force: 200 kN Supply Voltage: 240 V AC Mains Frequency: 50 / 60 Hz Current Consumption: 10 A Machine Weight: approx. 1,330 kg Operator Console Separate digital operator console Microprocessor-controlled control Alphanumeric display (16 digits) 32 function keys Display for force, stress, and strain values Filter and calibration functions Data interface Programmable test sequences Dimensions (W × D × H): 355 × 470 × 267 mm Weight: approx. 7 kg Cable length: 4.5 m Control Cabinet Electronic control cabinet, series 4500 Standard equipment: Overall control Load frame control Force control Preparation for recorder interface Preparation for strain monitoring Dimensions (H × W × D): 635 × 280 / 380 × 394 mm Weight: approx. 32 kg Cable length to load frame: 3.5 m Equipment Electromechanical load frame 200 kN load cell Hydraulic grips Operator console Electronic control cabinet Industrial PC Monitor Keyboard Mouse Emergency stop device Digital control, series 4500 Accessories as shown in the images Applications Material testing Tensile tests Compressive tests Material characterization Quality assurance Testing laboratory Research and development Universities Automotive industry Plastics and metal testing Environmental Conditions Operating temperature: +10 °C to +39 °C Storage temperature: -40 °C to +66 °C Relative humidity: 10–90% (non-condensing) Shipping Data Machine weight: approx. 1,330 kg Control cabinet: approx. 32 kg Operator console: approx. 7 kg Transport on a pallet or by a freight forwarder is required. Condition Used. The machine was last used in an industrial setting. Optical condition as shown in the images. Normal age-related signs of wear are present. Scope of Delivery INSTRON 4507 Universal Testing Machine 200 kN load cell Hydraulic grips Operator console, series 4500 Electronic control cabinet Industrial PC Monitor Keyboard Mouse Operating manual Other accessories as shown in the images Scope of delivery as shown in the images. Dusdpfezktavsx Ahbjw Subject to changes, errors and prior sale.

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Dsdpezizlqjfx Ahbsuw Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) Dsdpezimgtofx Ahbjuw - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm Djdpszii Ugofx Ahbeuw - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Materials Testing Machine Duodpfx Ajziixlshbjw Test force in tension/compression: 500 N Overall height, without head traverse: 789 mm Overall width: 411 mm Overall depth: 622 mm Footprint: Net standing area: 0.008 m² Load frame base area: 0.196 m² Specific floor load: Based on typical equipment: 0.85 kg/cm² With 50% safety margin: 1.28 kg/cm² Ceiling load: Based on typical equipment: 97 kN/cm² With 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with upper mounting bracket: Minimum height: 235 mm Maximum height: 565 mm Working space height with lower mounting bracket: Minimum height: 90 mm Maximum height: 420 mm Weight: approx. 78 kg with extras Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) We are happy to answer further questions by phone.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BX1-FR100SN.A4K-004, For sale is a high-quality Zwick/Roell material testing machine, consisting of: Load frame Z100 Djdpezkugksfx Ahbjuw Machine type, axial: BX1-FR100SN.A4K-004 Machine type, torsion: BXC-TD0500.A4K-002 Force sensor, type Series K (100kN) Torque sensor, type Series NM (500Nm) Various ZPVs (Central Test Specifications) The system comes from a laboratory setting and was used for mechanical material testing. All devices are used, well-maintained, and fully functional.

Condition: new, functionality: fully functional, Year of construction: 2022, The Matest C313N is a laboratory freeze-thaw and climatic chamber primarily used for construction material testing—specifically for studying the behavior of concrete, cement, aggregates, and other materials under various temperature and humidity conditions.Primary purposes:Simulation of freeze-thaw cycles (e.g., testing concrete samples for resistance to thermal cycling).Standardized durability testing of construction materials (e.g., EN 1367-1).Execution of accelerated aging and climatic tests under diverse environmental conditions. Features: ✔ Dual parameter control: temperature and humidity. ✔ Temperature range: approx. -30 °C to +70 °C. Duedpfx Ahoy R D D Usbsw ✔ Humidity range: 20–95% (±1% accuracy within the appropriate temperature range). ✔ Programmable cycles: up to 50 programs and 100 segments. ✔ 5″ color display: real-time clock and optional data logging via PC connection. ✔ Stainless steel internal and external structure: for long service life.Applications:Freeze-thaw testing on concrete and building materials: demonstrates how materials crack or degrade due to thermal cycling.Quality control of construction materials under laboratory conditions. Environmental and climatic tests where precise control of heat and humidity is essential.

Condition: used, functionality: unexamined, Complete metal testing and materials testing laboratory Industrial quality assurance/testing laboratory as a complete package A fully equipped professional metal and materials testing laboratory from the industrial QA sector is for sale. The package includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key features: Dodpfx Ahsy Rglnobjuw - AMETEK / SPECTRO SPECTROTEST TXC02 UV portable OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN - JOMESA filter analysis system for technical cleanliness in accordance with VDA 19 / ISO 16232 - Struers TransPol-5 portable metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measuring system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC portable hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann fume hoods, laboratory benches, hazardous materials cabinets, and chemical cabinets - Extensive laboratory consumables, laboratory glassware, and accessories Complete object description can be found in the documents.

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), Duodpog Sxmfefx Ahbow 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2009, condition: defective spare-parts repository (used), Sale as spare parts warehouse Dodpjqgb H Djfx Ahbsuw

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 6770-22060, LEICA 6770 - Beam Aligner Duedethlauspfx Ahbew The equipment is NEW, it has never been used!!!

Condition: good (used), Year of construction: 1991, The BISON 2004 P electric forklift is a compact and robust electric forklift designed for internal material handling. With a load capacity of up to 2,000 kg, the machine is suitable for use in warehouses, production facilities, and loading areas. Technical data Working width / center of gravity (COG): 1,000 mm Load capacity: Rated load capacity: 2,000 kg at a load center of 500 mm Residual load capacity: 2,000 kg at a load center of 500 mm Mast: H25V Maximum lifting height: 3,525 mm Unladen weight (without battery): 2,400 kg Minimum battery weight: 780 kg Battery voltage: 48 V Dodpfxezf Euzj Ahbouw Machine description The BISON 2004 P impresses with its robust design and proven electrical technology. With a lifting height of 3,525 mm and a load capacity of 2 tons, this forklift is ideal for handling pallets, wood-based materials, machine components, and other heavy goods. The emission-free electric drive allows it to be used in enclosed halls and production environments.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 Dsdpertrzdsfx Ahbjuw RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear Dodpevr Hf Eofx Ahbsuw axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with Dedpfx Ahjw N S E Aebsuw precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), ERICHSEN CORROCOMPACT 618-1000 Corrosion Testing System Manufacturer: ERICHSEN GmbH & Co. KG Type: CORROCOMPACT 618-1000 Year of manufacture: 2017 Machine type: Corrosion testing system / Climate change testing system Test chamber volume: 1,000 liters For sale is a used ERICHSEN CORROCOMPACT 618-1000 corrosion testing system with a separate climate control unit and a Siemens SIMATIC touch control. The system was developed for professional corrosion, climate change, salt spray, and condensation testing and is ideally suited for testing laboratories, the automotive industry, research institutions, and quality assurance. Technical data: Model: 618-1000 Series: CORROCOMPACT 617 Serial number: 16855/005 Test chamber volume: 1,000 liters Power supply: 3+N+PE AC 400 V / 50 Hz Connected load: 5 kVA + 9 kVA (climate control unit) Fuses: 3 × 32 A Compressed air connection: 6–10 bar Deionized/demineralized water: 3–6 bar Control: Siemens SIMATIC HMI Touch CPU version: 2.2.3 HMI version: 2.2.3 Climate control unit: Dedpezk A Ebofx Ahbouw Manufacturer: ERICHSEN Type: VS-Bo-1,1-40-L-S Year of manufacture: 2014 Serial number: 14-2430 Refrigerant: R507 Connected load: 3.3 kW Max. operating current: 8.4 A Compressor power: 1.3 kW Evaporator fan: 0.18 kW Condenser fan: 0.28 kW Steam humidifier: 1.6 kW Heater: 5 × 0.2 kW Dimensions: External dimensions (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Height with hood open: approx. 2,500 mm Internal dimensions (W × D × H): approx. 1,190 × 815 × 1,040 mm Equipment: Siemens SIMATIC touch panel Separate climate control unit 1,000-liter test chamber Climate change testing Salt spray testing Condensation testing Automatic test programs Compressed air connection Deionized water connection Salt solution connection Exhaust connection Floor drain Transport data: Test chamber (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Climate control unit (W × D × H): approx. 1,700 × 900 × 1,900 mm Weight of test chamber: approx. 600 kg Weight of climate control unit: approx. 500 kg Total weight: approx. 1,100 kg Condition: Used The system was last used in an industrial setting. Optical condition as shown in the pictures. Scope of delivery: ERICHSEN CORROCOMPACT 618-1000 Climate control unit VS-Bo-1,1-40-L-S Siemens SIMATIC HMI Touch Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 210 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2100mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dodpswh I Edsfx Ahbeuw Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, running hours: 4748 h Offered for sale is a used temperature test chamber from Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Explanation of the model designation: T = temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for buyers: The following processes are carried out on the chambers we offer before delivery: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) Dusdpfxoy Dciij Ahbsw We are happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the upgraded safety and performance test package “P Plus.” This is not a standard laboratory incubator, but rather a high-end safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. The device is fully functional and has been tested. It originally sustained a transport-related housing damage, which has been professionally repaired and repainted. Technically flawless – visually in very good condition 100% operational – no limitations Price advantage: €1,000 cheaper than comparable units Special Value Added: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Item 2 – Performance & Application) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at temperature) - Long-term temperature runs and thermal cycling tests - Testing of unpowered and cyclical powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / E-mobility / Energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical and acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection inside chamber - Exhaust port with reversible overpressure valve - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual trigger of suppression system - Cable feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. This is not an abuse or destruction testing device, but a compliant, safe test chamber for real-world operational and fault scenarios. Technical Key Data: Temperature range: –10 °C to +100 °C Internal volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. overall load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50 / 60 Hz Dsdpsyyw E Rsfx Ahbsuw Phase: single-phase Power consumption: approx. 2.1 kW Fusing: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special: - Genuine battery safety test cabinet - EUCAR hazard level 5 capable - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors reserved!) Further questions? Please feel free to contact us by phone.

Condition: like new (used), operating hours: 250 h, SHI Machines Type: BlueBox Virtually unused with only 250 operating hours! Technical specifications: Power: 120 kW Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Accessories, etc.: 1 clutch 120 - steel, incl. adapter Clutch size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x clutch steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter mounting tool Clutch 120 - CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter mounting tool CISPR 25 test bench made of wood on wheels for EMC BlueBox 120, size 2500 x 1000 x 900 mm Load capacity up to max. 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information provided are subject to change!) We would be happy to answer any further questions you may have by telephone. Dedpfey Tg R Nox Ahbouw

Condition: excellent (used), Memmert Type: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber from the manufacturer Memmert, model CTC 256. The unit originates from professional use and is ideally suited for laboratories, industry, research, development as well as quality assurance. Dusdpfjy D Ni Ajx Ahbjw The Memmert CTC 256 is designed for precise simulation of temperature and climatic conditions. It enables both cooling and heating processes and – in this configuration – humidity control. This makes the unit perfect for material testing, aging tests, climatic stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated control system, complex test programs with temperature and time sequences can be set. The forced air circulation system ensures uniform temperature distribution in the chamber interior. Via the available interfaces, measurement data can be documented and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity control Electronic controller with programmable function Forced air system for even temperature distribution Internal protocol memory USB and Ethernet interface Additional 230 V socket Feed-through (side) Water container system (humidification/condensate) Mobile on castors Technical Data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see photo) Memmert CTC 256 climate test chamber Removable shelves Water canister Documents Delivery as shown (Specifications and technical data are subject to change and error!) If you have any further questions, we would be happy to assist you by phone.

Condition: used, LDS V790-335T Vibration Test System with HPA-K CE Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V790-335T with HPA-K CE Amplifier Machine Type: Electro-dynamic Vibration Test System / Shaker System Cooling: Air-cooled Vibrator For sale is an industrial vibration test system from the manufacturer LDS (Ling Dynamic Systems). The system was designed for professional vibration and shock testing and is suitable for research and development, quality assurance, environmental simulation, electronics testing, as well as industrial stress and endurance tests. Technical Data Shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3,000 Hz Resonant frequency: approx. 2,250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Duodpfx Ahoy Uigcebjw Sine force peak: approx. 6.67 kN / 1,500 lbf Random force RMS: approx. 6.67 kN / 1,500 lbf Half-sine shock force peak: approx. 26.69 kN / 6,000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support: approx. 5.52 bar / 80 psi Optional air isolation: approx. 5.52 bar / 80 psi Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: HPA-K Amplifier Model: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Weight of amplifier: approx. 750 kg Equipment LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units PC workstation with monitor, keyboard, and mouse Cables and connection accessories as shown in the pictures Emergency stop units and safety accessories Existing documents and documentation Areas of Application Vibration testing Shock testing Environmental simulation Electronics testing Automotive industry Aerospace Research and development Quality assurance Industrial stress tests Scope of Delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Existing documents / manual Condition Used System from industrial use Optical condition as shown in the pictures Normal signs of wear and tear and storage Inspection and testing on site are possible and expressly desired after prior arrangement. Due to the size and weight, professional dismantling, loading, and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: good (used), NOVOTEST Impulse Test Stand / High-Pressure Test Stand Sale from site! Manufacturer: NOVOTEST / BLUM-NOVOTEST GmbH Type: Impulse Test Stand System No.: 00318 Version: High-pressure impulse test stand with hydraulic supply and test cell For sale is a used NOVOTEST impulse test stand suitable for industrial applications, test engineering, hydraulics, research, development, and quality assurance. The system was used for dynamic internal pressure testing of hoses, pipelines, fittings, and containers, and features computer-controlled test sequence management. Technical data: Max. operating pressure: 1,500 bar Test medium: Mineral oil / various testing media possible Frequency: 50 Hz Rated power: 135 kVA Operating voltage: 3 x 500 V PEN Control voltage: 230 V~ / 24 V- Pre-fusing: min. 160 A / max. 200 A Impulse volume at 1,500 bar: max. 140 cm³ Impulse volume at 1,000 bar: max. 210 cm³ Additional pressure stage: max. 340 cm³ Maximum test frequency: 1.7 Hz Test fluid temperature: up to max. 160 °C Temperature control accuracy: ± 3 °C Total weight according to nameplate: approx. 6,000 kg Equipment: - Complete industrial impulse test stand - Enclosed test chamber / test cell - Hydraulic power supply - Specimen supply system - Power section - Test cabinet - Operator cabinet - PC-based control system - Pressure and displacement transducers - Temperature control - Flushing system for test media Duodpfjy Rp R Tsx Ahbew - Safety monitoring / emergency stop - Technical documentation available Hydraulic power unit: - BOSCH hydraulic power unit - Output: 55 kW - Voltage: 500 V / 50 Hz - Tank volume: approx. 840 l - Max. operating pressure: approx. 280 / 315 bar Suitable for: - Pressure impulse testing - Hydraulic testing - Burst testing - Hose testing - Component testing Condition: Used system with age and usage-related wear. Visual condition as per photos. The unit comes from industrial use. Scope of delivery: - NOVOTEST impulse test stand - Test cell / test chamber - Hydraulic power unit - Control and operator cabinet - PC / monitor / operator unit - Drawer cabinet with accessories - Technical documentation / folders - Scope of delivery as depicted Commercial sale – sale without warranty. Subject to changes and errors.

Condition: excellent (used), Memmert Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Operating range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-conductor) Interior and capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of inserts: 8 Load per insert: 30 kg Dusdpfoy T Ictsx Ahbsw Maximum total load: 300 kg Interior: stainless steel, all-round heating External dimensions and weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% steps Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and undertemperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear has 2 openings each with approx. 12 cm diameter Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.