Used Container-Vertrieb-Chemnitz Wassertank Abrollcontainer for sale (6,705)

Condition: new, We offer you high-quality roll-off containers as water tanks/water reservoirs, manufactured to your specifications using a self-supporting design. Available to order! Fpodpfjzhwccjx Ahdon Europe-wide delivery! ---FINANCING---LEASE PURCHASE---LEASING--- -possible, please contact us!- Possible dimensions: 4 - 7.0m x 2.30 x 1.0m Possible internal heights: H = 800 mm H = 1000 mm H = 1100 mm H = 1300 mm H = 1500 mm Optional: Rear platform for mounting a water pump Other dimensions available on request!!! We will gladly design according to your specifications. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Roof: 3 mm Cross member: INP 180 Lifting bracket Ø 50 mm, hook height 1,570 mm - 2 internal baffle plates - Internal level indicator with float - Dome lid with rubber seal, 50 x 50 cm - 1x C-Storz connection below the level indicator - Front/top vent with shut-off valve - Rear with approx. 50 cm platform - Rear with 1x C-Storz connection - Rear with 1x 6-inch flange -> Watertight welded with 24-hour leak test - Primed once internally, twice externally - Externally painted twice in a single color according to your desired RAL color Optionally available: - Protective coating inside, according to specifications for the respective application - Fully galvanized version - Anti-slip coating on the roof - A-B-C Storz connection of your choice - Hydraulic dome lid - Additional rear hydraulics for slide valve - Subframe UNP220 for 22t total weight!

Condition: new, Year of construction: 2026, container length: 6,500 ft, We offer you high-quality skip loaders with mutually angled outer walls. Volume up to 40 cubic meters. Designed for the scrap and demolition industry, made of wear-resistant special structural steel HB450 HARDOX®. ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We exclusively use “original” HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the “authenticity” of our products!!!! --- FINANCING --- RENT-TO-OWN --- LEASING --- -possible, please contact us!- Heavy-duty design for use in the scrap and demolition industry. Fpedpfozg Iu Tsx Ahdsn Dimensions: 6500 x 2300 x 2400 mm 7000 x 2300 x 2400 mm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Cross member: INP 180 Mounting bracket Ø 60 mm, hook height 1,570 mm -Floor made of 5 mm HARDOX® HB450 -Side walls 3 mm HARDOX® HB450 -End profile made of 5 mm Strenx® 700 special edge profile -Rear and center spars made of 5 mm Strenx® 700 special edge profile -Rear door locking system Model Holland + safety lock -Lateral central locking -All-round tarpaulin and net hooks -Access ladder at the front, galvanized -Primed once inside, double-coated outside -Double-coated outside in a single color according to your desired RAL Optionally available on request: -Cross member UNP 220 = 22t design -Roll tarp -Steel cover with winch / hydraulics -Access ladder on the rear door -Additional spars / belly band -French door -Swing door -Grain slide

Condition: new, Year of construction: 2026, We offer this roll-off platform in various lengths, custom-made to your specifications. Color: as desired Delivery throughout Germany ---FINANCING---LEASE PURCHASE---LEASING--- -available, please contact us!- Details: Usable area: 6500 x 2470 mm Hook height: 157 cm Hook diameter: 50 mm Floor: 5 mm non-slip sheet metal 2x material/tool box on the front wall Side UNP perforated strip 10 lashing eyes recessed on the right (5) and left (5) in the floor, 2.5 tons/eye 2 lashing eyes, 5.0 tons each, on the front wall Painting in desired color UVV approved and inspected Fjdpfezgc Sajx Ahdepn What sets us apart from others? - Robot-welded component groups - All weld seams are continuous on the frames - All containers are bead-blasted - Double primed - Double coated - All containers have identification plates and valid UVV inspection.

Condition: as good as new (ex-display), We offer you high-quality roll-off containers with mutually angled outer walls, custom-made to your specifications! Designed for the most demanding applications, manufactured from HB450 HARDOX®. Equipped with a folding net system for quick and secure load securing. ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We exclusively use "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the "authenticity" of our products! --- FINANCING --- LEASE-TO-OWN --- LEASING --- -possible, please contact us!- Heavy-duty design for use in the scrap and demolition industries. Dimensions: 6500 x 2300 x 2400 mm 7000 x 2300 x 2400 mm Other sizes available on request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Crossmember: INP 180 Mounting bracket Ø 60 mm, hook height 1,570 mm -semi-automatic folding net system -floor made of 5mm HARDOX® HB450 -side walls 3mm HARDOX® HB450 -end profile made of 5mm Strenx® 700 special edge profile -rear crossmember made of 5mm Strenx® 700 special edge profile -center crossmember made of 3mm Strenx® 700 special edge profile -door latch, Holland model + safety latch -lateral central latch -all-around tarpaulin and net hooks -ladder on the front, galvanized -primed once on the inside, double-coated on the outside -double-coated, solid color on the outside, in your desired RAL color Optionally available on request: -crossmember INP 220 -roll cover -steel lid with winch / hydraulics -ladder on the rear door -additional crossmembers / belly band -French flap -swing flap -grain slide What sets us apart from others? Fpodezpfx Ispfx Ahdjn - Robot-welded component groups - All welds are continuous at the crossmembers - All containers are bead-blasted - Double-primed - Double-coated - All containers have nameplates and valid UVV testing certificates. Visit us on our website!

Condition: new, We offer roll-off containers / landscaping containers with a drive-over and spring-loaded rear door, a hydraulic drop gate, and a hydraulic French door, all in a spar-free design, available upon request. Delivery throughout Europe! Suitable for transporting heavy bulk goods and construction machinery. The only landscaping container with a clear / usable floor width of 235cm! ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We use exclusively "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard version in HARDOX HB450 Dimensions: 4.5 - 7.0m x 2.35 x 0.8m 4.5 - 7.0m x 2.35 x 0.95m 4.5 - 7.0m x 2.35 x 1.05m 4.5 - 7.0m x 2.35 x 1.15m 4.5 - 7.0m x 2.35 x 1.25m 4.5 - 7.0m x 2.35 x 1.35m 4.5 - 7.0m x 2.35 x 1.40m Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Lifting bracket Ø 50 mm Hook height 1,570 mm DIN 30722-1 up to 15,000 kg GVW Material thicknesses "HARDOX HB450" Floor: 5mm Walls: 3, 4 or 5mm Cross member: INP 180 Or DIN 30722-2 up to 22,000 kg GVW -Rear door drive-over with spring relief -End wall raised / cab protection or alternatively flat -Closing profile made of square tubing -All-around tarpaulin and net hooks -Primed once on the inside, double coated on the outside -Double coated on the outside in a single color, RAL color of your choice Optionally available: -Standard wing doors -hydraulic rear door with wing doors -Drop gate, hydraulic or pneumatic mounted with piano hinge -Removable hinged flap "in the upper area" -Tie-down eyes in the floor Fpedpfozhpklsx Ahdsn -Roll tarp -Marcolin covering, manual or electric -Netting system for covering / load securing -Grain slide

Condition: new, Year of construction: 2026, We offer roll-off containers in various sizes, available on request. Color: RAL color of your choice Delivery throughout Europe Dimensions: 40 cubic meters 7000 x 2380 x 2400 mm Other dimensions are possible! 4.0 - 7.0 m x 2.38 x 2.4 m Reinforced design with lateral “belly bands”. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Regulation 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Crossmember: INP 180 Rounded transition between base and wall Fpedpfx Aszg Ipqjhdsn -End profile made of round tube -Door lock, Holland model + -Lateral central locking -All-round tarpaulin and net hooks -Ladder on the front -Primed once on the inside, double-coated on the outside -Double-coated in a single color on the outside, in the RAL color of your choice Optionally available: -Spar distance 50 cm -Transverse spars -Mounting bracket, Ø 60 mm -Roll tarp -Steel cover with winch / hydraulics -Net system for covering / securing the load -Ladder on the rear door -Additional spars / belly band -French flap -Swing flap -Grain slide

Condition: new, maximum load weight: 18,000 kg, Made to order! Delivery throughout Europe! ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Silage container, suitable for Krampe, Fliegl, Pronar, Oehler, metaltech hooklift trailers. Spant-free design with hydraulic rear tailgate! Capacity: approx. 44 cubic meters! Clear internal dimensions next to the tunnel (L x W x H): 7500x2430x2300mm Internal floor length behind the tunnel: 7050mm Hook: 450mm, with tunnel!!! Unladen weight: 3810 kg Other dimensions are possible!! Material quality: SJ235 (ST37-2) Floor plate / wall plates: 5 / 3 mm -Subframe UNP 220 = 22,000 kg total weight -Hook: 60mm -Rollers reinforced -Perforated metal grating at the front wall, foldable -Perforated metal grating in the “hook tunnel”, welded -Double-acting hydraulic cylinders -Hydraulic connection at the rear, lower left Optional available: -Galvanized grain slide -Hydraulic connection on the hook Roll-off container according to DIN 30722 -H-coupling, -Reinforced and raised front -Galvanized and replaceable ladder according to UVV -Warning marking according to DIN 67520. Further options: -Roller shutter -Second ladder -Tie-down points in the floor and on the front wall -Hydraulic folding net for covering / load securing -Hydraulic Transcover system -Branding with your advertising Fpsdpfx Ahszhnqwjden What sets us apart from others? -Robot-welded component groups -All containers are bead-blasted -Double primed -Double coated -All containers have nameplates and a valid UVV inspection.

Condition: new, Available on request! Delivery throughout Europe! ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Standard roll-off container 6.5 x 2.38 x 2.4 = 37 cbm Including folding net system! "Semi-automatic" operation The net can be opened completely and can also remain open while driving! Other sizes available on request. From 4-7.0m container internal length possible. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Floor: 5 mm Walls: 3 mm Cross member: INP 180 Transition between floor and wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -End profile made of round tube -Door latch model Holland + -Lateral central latch -All-round tarpaulin and net hooks -Step on the front end, welded -Primed once on the inside, double coated on the outside -Double coated, single-color on the outside, in desired RAL color Optionally available on request: -Steel grade according to specification s235, s355, hardox -DIN 30722-2 -> 22,000 total weight -Spar spacing 50 cm -Cross spars -Mounting bracket Ø 60 mm -Roll cover -Steel cover with crank / hydraulics -Net system for covering / securing the load -Ladder on the rear door -Additional spars / belly band -French flap -Swing flap -Grain slide What sets us apart from others? Fedpfx Ahszhpizjdopn -Robot-welded component groups -All weld seams are continuous on the spars -All containers are bead-blasted -Double primed -Double coated -All containers have nameplates and valid accident prevention regulations (UVV) certificates.

Condition: new, overall weight: 15,000 kg, loading space volume: 37 m³, loading space width: 2,430 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, We offer roll-off containers with a folding net cover in a spar-free design, available to order. ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Type Eco "H" with additional reinforcing band Fpedpfezu Dd Hsx Ahdsn -> new model, reinforced design Thanks to the folding net system, cargo can be secured in 15 seconds. Dimensions: 6500 x 2400 x 2400mm = 36.5 cbm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Bottom: 5mm Walls: 3mm Crossmember: INP 180 Transition from bottom to wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -Folding net system, semi-automatic -> integrated into the top edge -Mesh size 2 x 2mm -Lever mechanism and brackets galvanized -End profile made of special profile, bent -Door lock, Holland + model -Lateral central lock -All-around tarpaulin and net hooks -Ladder rungs on the front -Primed once on the inside, twice on the outside -Painted twice in a single color on the outside, according to the customer's RAL color Optionally available to order: -French flap -Swing flap -Grain slide What sets us apart from others? -Robot-welded component groups -All weld seams are continuous on the spars -All containers are bead-blasted -Primed twice -Painted twice -All containers have nameplates and a valid UVV inspection certificate.

Condition: new, container length: 6,500 ft, color: other, overall weight: 15,000 kg, We offer this custom-built half-pipe roll-off container with a hydraulic rear door in a spar-free design. 6.5 x 2.3 x 1.10 = 16.5 cbm Floor / wall made of 5/4mm Hardox ❌1 unit immediately available, color can be chosen❌ Ideal for demolition, civil engineering, or agricultural use! ⚠️ Unfortunately, many dealers advertise using the Hardox brand name but do not use genuine Hardox! We exclusively use “original” HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the “authenticity” of our products! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Color: as desired Delivery throughout Europe Dimensions: Approx. 16.5 cbm 6500 x 2300 x 1100 mm Possible lengths: 4.30 - 7m Possible heights: 900 1000 1100 1250 1500 Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Floor: 5mm Hardox ® Optionally, in one piece Walls: 4mm Hardox ® Crossbar: INP 180 End profile: Rectangular tube made of S700 Weight approx. 2700kg Also available in S235 "normal steel" with a floor thickness of up to 8mm! --hydraulic rear door, flush-mounted / hydraulic connections on the left -2 telescopic cylinders, optimal working pressure 160- max 200 bar -Oil flow 6-10 liters / minute Fedpfx Ahjzgdctedopn -raised front cab protection -rounded transition between floor and wall -floor spar spacing 750 mm -spar profile U 80 x 50 mm -all-round tarpaulin and net hooks -primed once on the inside, double-coated on the outside -double-coated, single-color on the outside in the desired RAL color Optionally available: -roll tarp -mechanical / electric Marcolin covering -hydraulic connections on the front wall -bolted fenders -crossbar UNP 220 -lifting bracket Ø 60mm -mesh grille in the front wall -grain / cereal slide

Condition: new, Year of construction: 2024, color: red, loading space volume: 20 m³, loading space width: 2,500 mm, loading space length: 6,900 mm, loading space height: 1,250 mm, gearing type: other, driver cabin: other, Vehicle location: in transit, Structure: ARCHIVE IMAGES Roll-off container for water in accordance with DIN 14505 - Water transport for at least 10,000 liters - Length: approx. 6.90 m - Width: approx. 2.50 m - Height: approx. 1.25 m - Permissible total weight: 14,000 kg - Roll-off frame must be manufactured in accordance with DIN 14505:2015 - Water tank with baffles - Dome cover 60 x 60 cm square or round (diameter 60 cm) as entry and cleaning opening - Ventilation valve - Equipment compartment in the rear area for storing 2 B 5m filling hoses, folding containers (Husky 3000 Gal.) and water-carrying fittings, size: min. 80cm deep, 200cm wide, 100cm high, closed with a simple closing flap system or roller shutter - Complete emptying must be possible without a pump at the rear, e.g. two emptying nozzles min. DN 100 with shut-off valves and Storz A coupling DN 125 in the middle of the container with a shut-off valve, also accessible at the rear - Two access nozzles DN 75 with Storz B coupling and shut-off valve, free inlet into the tank, pipe routing in the lower area of the roll-off container on the right and left or both at the back, led outwards - Automatic ventilation and final ventilation valve, volume flow min. 3,000l min Fsdovhmqyepfx Ahdopn - Water level indicator - Color: red RAL 3000 - Storage box for 2 A hoses, dimensionally stable 5 m in roof box design - Plastic coating inside - with overflow possible for use on 3-axle vehicles (tank approx. 11,500L capacity) Delivery time approx. 10 - 12 weeks Available from 5,000-25,000 liters Price depending on the number of liters between EUR 10,000.00 to approx. EUR 20,000.00 per number of liters/volume Available with self-priming water pump, self-lubricating with separate motor, delivery capacity: 129m³/hour 2000l/min, pump height: 17m, grain size: 28mm, fuel diesel, tank: 4.3 ltr., see 2907 for an additional charge of EUR 4,000! Available as a roll-off container and tank ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: new, loading space length: 5,300 mm, loading space width: 2,300 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane ELLERMANN roll-off container according to DIN 30722-1 Standard container Type S 77 with crane platform Internal dimensions: approx. 6.5/5.3 x 2.3 x 2.0 meters (all dimensions are approximate) Usable volume: approx. 24 m³ Paint finish: RAL 7016 (anthracite gray) ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outer rollers and subframe made of INP 180 Outer rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support is reinforced with 10 mm knee plates ? Crane platform 20 mm thick on the end face, length approx. 1,200 mm Reinforcement on the end wall support and subframe on the inside Additional stiffening on the end support ? Crane cutout on the end wall (according to Fassi drawings) ? Bottom pan made of 5 mm St 37.2 (S235JR) ? Side walls made of 3 mm St 37.2 (S235JR) ? Rounded bottom pan, raised approx. 250 mm towards the side wall ? End profile made of sturdy round tube Ø 90 mm ? Spant spacing 750 mm Spant profile U 80 x 50 mm Fjdpfxezq Iu Uo Ahdjpn ? On both sides, 1 x transverse spant in the middle, fully welded ? Double-wing door at the rear with Dutch door latch and lateral safety central locking system according to UVV Safety central locking system extended to 2,000 mm Door latch with container door opening aid and hockey lock Additional opening handle on the left door leaf ? All-around tarpaulin and net hooks ? Container primed once on the inside, primed twice on the outside and painted twice in a single color on the outside ? UVV stickers with safety instructions ? Container inspected and approved according to DGUV Rule 214-017 (formerly BGR 186) ? Container inspection book (digitized) for documenting the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection when the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° all hydraulic cylinders are double-acting piston rods are hard-chrome plated double knee joint system with PROLINK (over-extension of the knuckle arm up to 15°) electronic overload shut-off device with FX500 6 functions RCH or RCS radio remote control (linear levers) with display and XP system emergency shut-off and optical alarm (90% and 100%) including digital slewing limitation, adjustable FASSI stability control FSC incl. LMB II pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable on one side separate hydraulic tank (90 l) with filter, mounted on the crane base extendable on both sides, support width 4.60 m, hydraulic support ? CE, incl. M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black load hook and attachment brackets (short / 500 mm) Transport position: folded across the direction of travel Dead point above the support beam Note: Observe on-board voltage / 12V or 24V, standard 24V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work spotlight on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose lines / eactive Slewing valve, only for cranes with rack and pinion Quick-action valve for the outriggers Additional cos

Condition: new, overall weight: 7,000 kg, axle configuration: 2 axles, suspension: other, color: white, Year of construction: 2020, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Roll-off container, DIN 30722-3, City model - Internal dimensions of the loading area: 3800mm x 2000mm x 500mm - Volume: approx. 3.5 cbm - Floor thickness: 3mm - Wall thickness: 3mm Fpodpfx Aezv Npdohdon - Hook height: 900mm - Front wall with hook height and angled corners Subframe: UNP 140 - Locking mechanism: hydraulic, operated from inside - Double-wing door with Dutch door closure and side lock - Central safety locking mechanism according to UVV regulations - All-around tarpaulin and net hooks - Welded step - Container primed once on the inside, primed twice on the outside, and painted twice in a single color (RAL 7016) on the outside - UVV stickers with safety instructions - Container inspected and approved according to DGUV Rule 214-017 - Delivery is possible; please inquire about delivery costs and delivery time via email - Errors and prior sale excepted! ... VAT can be shown, new, very good condition, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban)

Condition: good (used), functionality: fully functional, Used container system, dry, sealed, in good condition - Consisting of 8 x 30-foot containers Dimensions per container: Length: 9.15m Width: 2.50m External height: 2.96m Internal height: 2.70m Area: approx. 177m² Insulation: Roof: 100mm Wall: 60mm Floor: 60mm Equipment: - 1x standard entrance door - 1x double-leaf entrance door - extra high entrance - PVC flooring - Plastic windows with insulated glazing and tilt/turn function - Blinds - Electric heating - Lighting - Sealing strips - Wall cladding - Ceiling cladding - Threshold plates - Container corner fittings - Documentation available Fjdezt Sa Topfx Ahdspn The system can be dismantled, loaded, and transported for an additional fee. This system is offered for sale. The land cannot be rented or purchased. Only serious and legitimate inquiries, including name, email address, and telephone number, will be answered.

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey-black, empty load weight: 1,000 kg, machine/vehicle number: 11m² Container Stand Classic-Linie, Equipment: lighting, External dimensions: 240 x 460 x 260 H Standard configuration description: • Roof/wall insulation PU – 40 mm • Sandwich panels – (RAL 7016) • Frame color – (RAL 7016) • Floor – laminate • 1x exterior door 90 x 200 • 4x windows (sliding & fixed) Fjdpfx Aor Db R Rjhdopn • LED lighting (interior/exterior) • Electrical cabinet with circuit breaker • Power connection 32 A incl. sockets • Weight – 950 kg

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Fedpfx Aopxnpaehdopn Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.

Condition: good (used), functionality: fully functional, Used container system, dry, sealed, clean - Manufacturer: ALHO - Consisting of 16 + 2 x 20-foot containers = approx. 270 m² - Current use: temporary school - Available from July 31, 2026 Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.95 m Internal height: 2.50 m Insulation: Wall: 80 mm Floor: 100 mm Ceiling: 80 mm Equipment: - Central staircase consisting of 2 x 20 ft containers - 4 classrooms, each consisting of 4 x 20 ft containers - 2 emergency staircases for the upper floor - Plastic windows with insulated glazing and tilt-and-turn function - Blinds - Electric heating - Sealing strips - Wall cladding - Ceiling cladding - Threshold plates - Container clamps - Acoustic elements Manufacturer's documentation is available. Loading and transport can be arranged. Fpedpjzhgt Refx Ahdjn Only serious and legitimate inquiries will be answered, and these must include: name, email address, and telephone number.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 1,400 kg, total length: 7,000 mm, total width: 2,400 mm, total height: 2,800 mm, wall thickness: 40 mm, machine/vehicle number: 16.8m² Bürocontainer Premium-Linie, External dimensions: 240/700 cm Height: 280 cm Walls: Sandwich panel Fpodpfequqhdsx Ahdon Exterior cladding: Luxurious horizontal louvered cladding panel Ceiling: Galvanized LT sheet + insulation + PVC cladding Floor: Hydrophobic plywood + laminate Windows and doors: Façade window + door – aluminium

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Fpjdszq Iu Ispfx Ahdjn Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose guides / eactive Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 7.2 ft, color: white, overall weight: 600 kg, maximum load weight: 600 kg, empty load weight: 600 kg, loading space volume: 6.6 m³, loading space width: 1,200 mm, loading space length: 2,200 mm, loading space height: 2,500 mm, machine/vehicle number: Sanitärcontainer DUSCHE-DUSCHE, Equipment: bathroom, shower, Sanitary container | Shower container | Double toilet container | 120cm x 220cm | Model DUSCHE-DUSCHE | High-quality and flexible solution Available products can be viewed in our warehouse and picked up directly. Our office and living containers offer an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical details: Dimensions: • Length: 220 cm • Width: 120 cm • Height: 250 cm • Weight: 600 kg Insulation: • Ceiling/Wall: 5 cm PUR (polyurethane) • Optional: 10 cm insulation with PUR, PIR, or mineral wool available • Floor: 16 mm fiber cement board • PVC flooring Equipment: • 2 rooms • 2 exterior doors Fpsdpfxevwbqto Ahdon • 2 showers • 2 ventilation systems Colors: • Facade color: RAL 9002 • Frame color: RAL 9002 • Customization: Individual design possible according to customer requirements High-quality workmanship for long-term use Stock and delivery: • In stock: Same-day shipping • Not in stock: Production time per model, 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Custom dimensions: Products can be manufactured according to the specific requirements of the customer. Showroom address: Am Schafhaus 28, 53557 Bad Hönningen Germany We are happy to provide further information or tailor-made solutions!

Condition: new, Year of construction: 2025, Length/width/height: 700/300/270 cm Exterior Color: RAL color according to customer requirements Walls: 40mm PU panels Floor: hydrophobic plywood + laminate Fpsdsm Dtadepfx Ahden Roof: 40mm PU panels Electrical installation: 32A sockets, switch 3x LED inside and 1x outside light Windows: 2 pcs. PVC 90×240 cm 1pc. PVC 75×240 cm 1pc. PVC 75×237 cm 1pc. PVC 90×240 cm 1pc. PVC 75×240 cm 1pc. PVC 75×232 cm 1pc. PVC 90×40 cm 1pc. PVC 50×50 cm Door: 1 piece 90×200 cm Sanitary: yes

Condition: good (used), Equipment: air conditioning, Used container unit, dry, sealed, clean - Manufacturer: Algeco - Year of manufacture: 2018 - Combination of office (27 m²), storage (54 m²) and terrace (54 m²) - Former rental station - Available immediately Dimensions per container: 6x Length: 6.00 m Width: 3.00 m External height: 2.95 m Internal height: 2.50 m 1x Length: 9.00 m Width: 3.00 m External height: 2.95 m Fedpez Armrsfx Ahdspn Internal height: 2.50 m Equipment: - Air conditioning - Plastic windows with insulated glazing and tilt-and-turn function - Blinds - Parapet - Double-leaf door - Entrance door with glass insert - Electric heating - Sealing strips - Wall paneling - Ceiling paneling - Threshold plates - Container clamps Manufacturer's documentation is available. Loading and transport can be arranged. Only serious and legitimate inquiries including the following information will be answered: name, email address and telephone number.

Condition: new, functionality: fully functional, Year of construction: 2025, color: orange, overall weight: 1,750 kg, empty load weight: 1,750 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Cafe Container EICHE IMBISS, Food Container | Sales Container | Café Container | Office Container | Model OAK SNACK | 240cm x 600cm | High-Quality and Flexible Solution Available products can be viewed and picked up directly from our warehouse. Our office and living containers offer an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical Details: Dimensions: • Length: 240 cm • Width: 600 cm • Height: 250 cm • Weight: 1750 kg Insulation: Fpedpfx Ahex Hqblsden • Oak wood cladding • Ceiling/Wall: 5 cm PUR (polyurethane) • Extra robust and special floor chassis • 2 mm thick galvanized steel sheet • With stone wool insulation between the panes • Optional: 10 cm insulation with PUR, PIR or stone wool available • Floor: 16 mm fiber cement board • PVC flooring Equipment: • 1 room • 2 flaps • 2 doors High-quality workmanship for long-term use Inventory & Delivery: • In stock: Shipped the same day • Not in stock: Production time, depending on the model, is 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Custom sizes: Products can be manufactured according to the customer's specific requirements. Showroom address: Am Schafhaus 28, 53557 Bad Hönningen Germany We are happy to provide you with further information or customized solutions!

Condition: used, container length: 20 ft, -Used -Wind and waterproof -available immediately -The price is ex depot Frankfurt (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: Fsdpfxjvyacts Ahdepn - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: new, functionality: fully functional, Year of construction: 2025, color: black, overall weight: 1,600 kg, empty load weight: 1,600 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Cafe Container Model Imbiss, Food Container | Sales Container | Cafe Container | Office Container | Model IMBISS FOREST | 240cm x 600cm | High-quality and Flexible Solution Available products can be viewed and collected directly from our warehouse. Our office and living containers offer an excellent solution for a variety of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Dkebtyew Iwmcjqfyxor Technical Details: Dimensions: • Length: 240 cm • Width: 600 cm • Height: 250 cm • Weight: 1350 kg Insulation: • Panels with wood-look finish • Ceiling/Wall: 5 cm PUR (Polyurethane) • Particularly robust and special floor chassis • 2 mm thick galvanized steel sheet • With stone wool insulation between the panes • Optional: 10 cm insulation with PUR, PIR or stone wool available • Floor: 16 mm fiber cement board • PVC covering Equipment: • 1 room • 3 flaps • 1 door Fjdpjw Iwmiofx Ahdepn Colors: • Panels with wood-look finish • RAL7016 High-quality workmanship for long-term use Stock and Delivery: • In stock: Same-day shipping • Not in stock: Production time depending on the model, 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Custom dimensions: Products can be manufactured according to the customer's specific requirements. Showroom Address: Am Schafhaus 28, 53557 Bad Hönningen Germany For further information or customized adjustments, we are happy to assist you!