Roll-off container for scrap / demolition

Container-Vertrieb-Chemnitz

Condition: new, container length: 6,500 ft, color: other, overall weight: 15,000 kg, We offer this custom-built half-pipe roll-off container with a hydraulic rear door in a spar-free design. 6.5 x 2.3 x 1.10 = 16.5 cbm Floor / wall made of 5/4mm Hardox Fpodpfx Ahozgdctodjn ❌1 unit immediately available, color can be chosen❌ Ideal for demolition, civil engineering, or agricultural use! ⚠️ Unfortunately, many dealers advertise using the Hardox brand name but do not use genuine Hardox! We exclusively use “original” HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the “authenticity” of our products! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Color: as desired Delivery throughout Europe Dimensions: Approx. 16.5 cbm 6500 x 2300 x 1100 mm Possible lengths: 4.30 - 7m Possible heights: 900 1000 1100 1250 1500 Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Floor: 5mm Hardox ® Optionally, in one piece Walls: 4mm Hardox ® Crossbar: INP 180 End profile: Rectangular tube made of S700 Weight approx. 2700kg Also available in S235 "normal steel" with a floor thickness of up to 8mm! --hydraulic rear door, flush-mounted / hydraulic connections on the left -2 telescopic cylinders, optimal working pressure 160- max 200 bar -Oil flow 6-10 liters / minute -raised front cab protection -rounded transition between floor and wall -floor spar spacing 750 mm -spar profile U 80 x 50 mm -all-round tarpaulin and net hooks -primed once on the inside, double-coated on the outside -double-coated, single-color on the outside in the desired RAL color Optionally available: -roll tarp -mechanical / electric Marcolin covering -hydraulic connections on the front wall -bolted fenders -crossbar UNP 220 -lifting bracket Ø 60mm -mesh grille in the front wall -grain / cereal slide

Condition: used, Volvo Wheel Loader L120G Year: 2013 Fpsdey Dt Aajpfx Ahdon Hours: 36595

Condition: new, overall weight: 15,000 kg, loading space volume: 37 m³, loading space width: 2,430 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, We offer roll-off containers with a folding net cover in a spar-free design, available to order. ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Type Eco "H" with additional reinforcing band -> new model, reinforced design Thanks to the folding net system, cargo can be secured in 15 seconds. Dimensions: 6500 x 2400 x 2400mm = 36.5 cbm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Bottom: 5mm Walls: 3mm Crossmember: INP 180 Transition from bottom to wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -Folding net system, semi-automatic -> integrated into the top edge -Mesh size 2 x 2mm -Lever mechanism and brackets galvanized -End profile made of special profile, bent -Door lock, Holland + model -Lateral central lock -All-around tarpaulin and net hooks -Ladder rungs on the front -Primed once on the inside, twice on the outside -Painted twice in a single color on the outside, according to the customer's RAL color Optionally available to order: -French flap -Swing flap Fodozu Dd Hspfx Ahdepn -Grain slide What sets us apart from others? -Robot-welded component groups -All weld seams are continuous on the spars -All containers are bead-blasted -Primed twice -Painted twice -All containers have nameplates and a valid UVV inspection certificate.

Condition: new, We offer you high-quality roll-off containers as water tanks/water reservoirs, manufactured to your specifications using a self-supporting design. Available to order! Europe-wide delivery! ---FINANCING---LEASE PURCHASE---LEASING--- -possible, please contact us!- Possible dimensions: 4 - 7.0m x 2.30 x 1.0m Possible internal heights: H = 800 mm H = 1000 mm H = 1100 mm H = 1300 mm H = 1500 mm Optional: Rear platform for mounting a water pump Other dimensions available on request!!! We will gladly design according to your specifications. Fodpfx Aszhwccjhdopn Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Roof: 3 mm Cross member: INP 180 Lifting bracket Ø 50 mm, hook height 1,570 mm - 2 internal baffle plates - Internal level indicator with float - Dome lid with rubber seal, 50 x 50 cm - 1x C-Storz connection below the level indicator - Front/top vent with shut-off valve - Rear with approx. 50 cm platform - Rear with 1x C-Storz connection - Rear with 1x 6-inch flange -> Watertight welded with 24-hour leak test - Primed once internally, twice externally - Externally painted twice in a single color according to your desired RAL color Optionally available: - Protective coating inside, according to specifications for the respective application - Fully galvanized version - Anti-slip coating on the roof - A-B-C Storz connection of your choice - Hydraulic dome lid - Additional rear hydraulics for slide valve - Subframe UNP220 for 22t total weight!

Condition: good (used), Year of construction: 2011, Load moving system Fjdpfx Aowvhrtshdopn CBM 240 / ST 120 MACH-ID 923 Type: CBM 240 / ST 120 Year: 2011

Condition: new, maximum load weight: 18,000 kg, Made to order! Delivery throughout Europe! ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Silage container, suitable for Krampe, Fliegl, Pronar, Oehler, metaltech hooklift trailers. Spant-free design with hydraulic rear tailgate! Capacity: approx. 44 cubic meters! Clear internal dimensions next to the tunnel (L x W x H): 7500x2430x2300mm Internal floor length behind the tunnel: 7050mm Hook: 450mm, with tunnel!!! Unladen weight: 3810 kg Other dimensions are possible!! Material quality: SJ235 (ST37-2) Floor plate / wall plates: 5 / 3 mm -Subframe UNP 220 = 22,000 kg total weight -Hook: 60mm -Rollers reinforced -Perforated metal grating at the front wall, foldable -Perforated metal grating in the “hook tunnel”, welded -Double-acting hydraulic cylinders -Hydraulic connection at the rear, lower left Optional available: -Galvanized grain slide -Hydraulic connection on the hook Roll-off container according to DIN 30722 -H-coupling, -Reinforced and raised front -Galvanized and replaceable ladder according to UVV -Warning marking according to DIN 67520. Further options: -Roller shutter -Second ladder -Tie-down points in the floor and on the front wall -Hydraulic folding net for covering / load securing -Hydraulic Transcover system -Branding with your advertising Fpsdpezhnqwofx Ahden What sets us apart from others? -Robot-welded component groups -All containers are bead-blasted -Double primed -Double coated -All containers have nameplates and a valid UVV inspection.

Condition: new, We offer roll-off containers / landscaping containers with a drive-over and spring-loaded rear door, a hydraulic drop gate, and a hydraulic French door, all in a spar-free design, available upon request. Delivery throughout Europe! Suitable for transporting heavy bulk goods and construction machinery. The only landscaping container with a clear / usable floor width of 235cm! ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! Fpodpfxozhpkle Ahdsn We use exclusively "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard version in HARDOX HB450 Dimensions: 4.5 - 7.0m x 2.35 x 0.8m 4.5 - 7.0m x 2.35 x 0.95m 4.5 - 7.0m x 2.35 x 1.05m 4.5 - 7.0m x 2.35 x 1.15m 4.5 - 7.0m x 2.35 x 1.25m 4.5 - 7.0m x 2.35 x 1.35m 4.5 - 7.0m x 2.35 x 1.40m Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Lifting bracket Ø 50 mm Hook height 1,570 mm DIN 30722-1 up to 15,000 kg GVW Material thicknesses "HARDOX HB450" Floor: 5mm Walls: 3, 4 or 5mm Cross member: INP 180 Or DIN 30722-2 up to 22,000 kg GVW -Rear door drive-over with spring relief -End wall raised / cab protection or alternatively flat -Closing profile made of square tubing -All-around tarpaulin and net hooks -Primed once on the inside, double coated on the outside -Double coated on the outside in a single color, RAL color of your choice Optionally available: -Standard wing doors -hydraulic rear door with wing doors -Drop gate, hydraulic or pneumatic mounted with piano hinge -Removable hinged flap "in the upper area" -Tie-down eyes in the floor -Roll tarp -Marcolin covering, manual or electric -Netting system for covering / load securing -Grain slide

Condition: ready for operation (used), Year of construction: 2000, operating hours: 70,606 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, GAS GENERATOR PLANT – CATERPILLAR 3516 (Complete Package) Fpjdpfjytq Eiox Ahdon Complete natural gas power generation package, supplied with main auxiliaries and systems. The unit was operating at full load without issues before shutdown. All maintenance performed by authorized service providers, strictly following the manufacturer’s recommended maintenance schedule. Preventive maintenance carried out immediately prior to shutdown (2022): - Inspection/checking of key engine parameters - Bearing lubrication - Oil replacement - Filter changes (oil and air) - Spark plug replacement - Borescope inspection: documentation available Technical specifications: - Electrical output: 1,030 kW - Total operating hours (since new): 70,606 h - Year of manufacture: 1999 - Fuel: Natural gas Scope of supply (included): - Complete genset - Gas train - Control panel - Circuit breaker (alternator + transformer) - Heat exchanger - Silencer - Cooling system (HT aerofan and LT cooling tower) - Lubrication system Availability: Immediately The equipment has already been dismantled and is stored in our warehouse, ready for loading or inspection.

Condition: new, Available on request! Delivery throughout Europe! ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Standard roll-off container 6.5 x 2.38 x 2.4 = 37 cbm Including folding net system! "Semi-automatic" operation The net can be opened completely and can also remain open while driving! Other sizes available on request. From 4-7.0m container internal length possible. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Floor: 5 mm Walls: 3 mm Cross member: INP 180 Transition between floor and wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -End profile made of round tube -Door latch model Holland + -Lateral central latch -All-round tarpaulin and net hooks -Step on the front end, welded -Primed once on the inside, double coated on the outside -Double coated, single-color on the outside, in desired RAL color Optionally available on request: Fsdpfx Ajzhpizjhdjpn -Steel grade according to specification s235, s355, hardox -DIN 30722-2 -> 22,000 total weight -Spar spacing 50 cm -Cross spars -Mounting bracket Ø 60 mm -Roll cover -Steel cover with crank / hydraulics -Net system for covering / securing the load -Ladder on the rear door -Additional spars / belly band -French flap -Swing flap -Grain slide What sets us apart from others? -Robot-welded component groups -All weld seams are continuous on the spars -All containers are bead-blasted -Double primed -Double coated -All containers have nameplates and valid accident prevention regulations (UVV) certificates.

Condition: as good as new (ex-display), We offer you high-quality roll-off containers with mutually angled outer walls, custom-made to your specifications! Designed for the most demanding applications, manufactured from HB450 HARDOX®. Equipped with a folding net system for quick and secure load securing. ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We exclusively use "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the "authenticity" of our products! --- FINANCING --- LEASE-TO-OWN --- LEASING --- -possible, please contact us!- Heavy-duty design for use in the scrap and demolition industries. Dimensions: 6500 x 2300 x 2400 mm 7000 x 2300 x 2400 mm Other sizes available on request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Crossmember: INP 180 Mounting bracket Ø 60 mm, hook height 1,570 mm -semi-automatic folding net system -floor made of 5mm HARDOX® HB450 -side walls 3mm HARDOX® HB450 -end profile made of 5mm Strenx® 700 special edge profile -rear crossmember made of 5mm Strenx® 700 special edge profile -center crossmember made of 3mm Strenx® 700 special edge profile -door latch, Holland model + safety latch -lateral central latch -all-around tarpaulin and net hooks -ladder on the front, galvanized -primed once on the inside, double-coated on the outside -double-coated, solid color on the outside, in your desired RAL color Optionally available on request: -crossmember INP 220 -roll cover -steel lid with winch / hydraulics -ladder on the rear door -additional crossmembers / belly band Fedpfx Aszpfx Iohdopn -French flap -swing flap -grain slide What sets us apart from others? - Robot-welded component groups - All welds are continuous at the crossmembers - All containers are bead-blasted - Double-primed - Double-coated - All containers have nameplates and valid UVV testing certificates. Visit us on our website!

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MM1007, bale length: 880 mm, bale height: 600 mm, pressing force: 500 t, Taurus shear baler model E 556.P, year 2015, in excellent working condition and complete with documentation. This machine is ideal for baling and shearing all types of ferrous scrap: profiles, sheet metal, bulky mixed scrap, and vehicles. Technical data Shearing force: 500 tons Shearing width: approx. 950 mm Fpjdpfx Ahoy Iblwodsn Shearing height: approx. 640 mm Box length: 5,600 mm Open box width: 2,400 mm Bale size (closed): Width: 880 mm Height: 600 mm Features Soundproofed 125 HP diesel engine Operator cabin Radio remote control Complete documentation Machine ready for operation.

Condition: new, Year of construction: 2026, We offer this roll-off platform in various lengths, custom-made to your specifications. Color: as desired Delivery throughout Germany ---FINANCING---LEASE PURCHASE---LEASING--- -available, please contact us!- Details: Usable area: 6500 x 2470 mm Hook height: 157 cm Hook diameter: 50 mm Floor: 5 mm non-slip sheet metal 2x material/tool box on the front wall Side UNP perforated strip 10 lashing eyes recessed on the right (5) and left (5) in the floor, 2.5 tons/eye 2 lashing eyes, 5.0 tons each, on the front wall Painting in desired color UVV approved and inspected What sets us apart from others? - Robot-welded component groups - All weld seams are continuous on the frames - All containers are bead-blasted - Double primed - Double coated - All containers have identification plates and valid UVV inspection. Fedpfjzgc Sasx Ahdopn

Condition: new, Year of construction: 2026, We offer roll-off containers in various sizes, available on request. Color: RAL color of your choice Delivery throughout Europe Dimensions: 40 cubic meters 7000 x 2380 x 2400 mm Other dimensions are possible! 4.0 - 7.0 m x 2.38 x 2.4 m Reinforced design with lateral “belly bands”. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Regulation 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Crossmember: INP 180 Rounded transition between base and wall -End profile made of round tube -Door lock, Holland model + -Lateral central locking Fpsdozg Ipqepfx Ahdjn -All-round tarpaulin and net hooks -Ladder on the front -Primed once on the inside, double-coated on the outside -Double-coated in a single color on the outside, in the RAL color of your choice Optionally available: -Spar distance 50 cm -Transverse spars -Mounting bracket, Ø 60 mm -Roll tarp -Steel cover with winch / hydraulics -Net system for covering / securing the load -Ladder on the rear door -Additional spars / belly band -French flap -Swing flap -Grain slide

Condition: like new (used), 2 Pcs. “Krupp 4” for Sale Find our complete Krupp stock on our website. Manufacturer: Krupp Fedpfx Aheglvyfsdspn Type: 4 Inlet size: 630 x 355 mm Electrical Motor: Included