Used Combination Folder for sale (4,199)

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: Guedpjl Dpc Ejfx Acfec • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Year of construction: 1998, condition: used, Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife delivery: Guedpfx Aodmdtbjcfsc • belt delivery

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Godod N D Nispfx Acfjuc Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: Godpfx Acsdmdt Ujfouc • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Size with continuous feeder max 660 x 1.280 mm Size cross fold min 150 x 200 mm Size threefold min 200 x 300 mm Speed max 180 m/min Length with continuous feeder 5.890 mm Width 2.340 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • noise prevention Guedpfx Ajd E Nbqscfjc 2nd folding unit: • cross-fold knife • noise prevention 3rd folding unit: • third-fold knife • Lärmschutzeinrichtung peripheral units and deliveries • stream delivery with pressing station -- optionales Equipment:--not included— • gate fold buckle plate

Year of construction: 2008, condition: used, Kombi-Falzmaschine - Combination Folder Heidelberg Stahlfolder KH82-4KTLL32 Seiten Seitenfalz - 32 pages cross Fold Year 2008 - Serial-No. 0-00256 Gusdpfx Acjrp En Ujfec Palettenanleger / Pallet Feeder PFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler bildschirm / Digital Display Inklusive Kompressor / include Compressor Inklusive Handbücher / Included ManualsAuslage / Delivery Heidelberg SAK-94 Year 2006 - Serial-No. 0-00421 Arbeitsbreite max. 940mm / Working width max. 940mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2006, Kombi-Falzmaschine - Combination Folder Heidelberg-Stahlfolder KH78-4KTLL Year 2006 - Serial-No. 0-00256 Palettenanleger / Pallet Feeder PFH-82 Gusdpfx Acep Symgsfsc Format / Size min. 140 x 180mm Format / Size max. 780 x 1280mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SAK-94.H Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Gjdpfx Acstq E U Sefeuc Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, operating hours: 4,624 h, control type: CNC control, sheet thickness steel (max.): 2 mm, year of last overhaul: 2012, No minimum price – guaranteed sale to the highest bidder! A complete overhaul was carried out by Salvagnini in 2012! TECHNICAL DETAILS Maximum infeed length: 1,850 mm Maximum infeed width: 1,500 mm Maximum outfeed width: 1,500 mm Minimum length: 285 mm Guedpfxozb H Txj Acfsc Minimum width: 190 mm Maximum diagonal: 2,150 mm Maximum reference dimension: 2,000 mm Minimum sheet thickness: 0.50 mm Sheet thickness, construction steel (max. 410 N/mm²): 2.00 mm Sheet thickness, stainless steel (max. 600 N/mm²): 1.25 mm Processing of pre-coated material: 3.00 mm Maximum tool length for CLA option: 1,000 mm MACHINE DETAILS Control type: CNC control Operating hours: 4,625 h EQUIPMENT LS Upper bending blade LI Lower bending blade Manual sheet support length adjustment CLA Long flange bending unit HP12015 R81 Cooling unit

Condition: good (used), Year of construction: 2003, Ref:11096 . 2003 MBO K760/4KL-RF 16pp Combination folding machine Comprising; Gujdsy Hixiepfx Acfoc RF continuous loading round pile feeder Sound hood with inspection windows Electronic knives SAP Presser stacker A76 Shingle belt delivery unit.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FX32 PLUS with a pivoting beam, featuring both fixed and segmented tooling. The Plus model, with its adjustable bending center, maintains a consistent distance to the radius rail throughout the entire bending process. The result is a perfect radius, without causing material stress, regardless of thickness, ensuring a flawless finish and virtually unmatched accuracy in angles and measurements. Technical specifications: Year of manufacture: 2024 Control: CNC with nuLink Mechanical bending compensation adjustment (Crowning system) Working length: 3200 mm Max. bending thickness: 2 mm Bending beam tooling: 7/10 and 20 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) Quick-change segmented tooling Guodjzc Hviepfx Acfoc High accuracy and repeatability Application: These machines are designed for bending, forming, and profiling sheet metal. They are ideally suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FS26 PLUS. With an adjustable bending center, the bending beam maintains a constant distance to the radius rail throughout the entire bending process. The result is an ideal radius, without causing material stress, regardless of the thickness, perfect finish, and almost unparalleled accuracy of angles and measurements. Technical specifications: Year of manufacture: 2024 Total weight: 2930 kg Control: CNC with nuLink Mechanical deflection compensation adjustment (Crowning system) Working length: 2600 mm Max. bending thickness: 2.5 mm Bending beam tooling: 7/10 and 25 mm Gjdpfxezc Hpie Acfeuc Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) High accuracy and repeatability Application: This machine is designed for bending, forming, and profiling sheet metal. It is perfectly suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,076 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20V COMBINED was manufactured in 2014. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. With a robust design and a weight of 2500 kg, this machine is ideal for precision turning applications. If you are looking to get high-quality Swiss type turning capabilities, consider the Hanwha XD20V COMBINED machine we have for sale. Contact us for further details. HANWHA XD20V • 4 Machines Available • Maximum Working Diameter: Ø20 mm • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA Guedpfx Aszcxgaocfjc • Short Circuit Current Rating: 2.5 kA • Operating Air Pressure: 4~6 kg/cm² (3.9~5.9 bar)Machine 1 • Machining Hours (TEMPS USIN.): 43,977 hMachine 2 • Machining Hours (TEMPS USIN.): 42,043 hMachine 3 • Machining Hours (TEMPS USIN.): 34,212 hMachine 4 • Machining Hours (TEMPS USIN.): 22,076 h IEMCA ELITE 220 R 32 LL (Bar Feeders) not included, optional • Manufacturer: IEMCA • Model: ELITE 220 R • Type: 32 LL • Bar Capacity: Ø32 mm • Air Pressure: 6 bar • Voltage: 200 V • Phase: 3~ • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kABar Feeder 1 • Year: 2013 • Weight: 630 kgBar Feeder 2 • Year: 2014 • Weight: 660 kg Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2013, operating hours: 37,745 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20 COMBINED was manufactured in 2013. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. The machine operates at a rated voltage of 220–240 / 380–415 VAC and has a weight of 2,500 kg. If you are looking to get high-quality turning capabilities, consider the Hanwha XD20 COMBINED swiss type turning machine we have for sale. Contact us for further details. HANWHA XD20 2 Units Available • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Short Circuit Current Rating: 2.5 kA • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Machining Hours (TEMPS USIN.): 37,745 h 24 m 26 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2014 • Air Pressure: 6 bar • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 660 kg HANWHA XD20H • Rated Voltage: 3 Phases, 220–240 / 380–415 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Max Rotation Speed: 10,000 rpm • Axis Control: 5 Axis • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Max Working Diameter: Ø20 mm • Dimensions (L × W × H): 2258 × 1304 × 1758 mm • Weight: 3300 kg • Machining Hours (TEMPS USIN.): 43,977 h 52 m 57 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2013 • Air Pressure: 6 bar Gsdpfx Acezcxagefouc • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 630 kg Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Dimensions and Weight Length approx. 1725 mm Width/Depth approx. 880 mm Weight approx. 270 kg Surface planer Gedpfxskwhyks Acfeuc Max. cutting depth: 4 mm Extraction Connection Extraction port diameter thicknesser: 2 x 120 mm Thickness planer Min. working height: 3 mm Max. working height: 230 mm Max. cutting depth: 4 mm Electrical Data Drive motor power: 4 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterblock Type: TERSA Number of knives: 3 pcs Speed: 5200 rpm Max. planing width: 300 mm Feed Speed: 7 m/min Availability: short-term Stock location: Flörsheim

Year of construction: 2021, condition: as good as new (ex-display), creasing- folding machine dmsDIGITAL 375+375KF Large stacking unit 500 mm Alignment section, creasing module, transfer section Folding unit with two swords Godpfenfvvmex Acfouc double sheet diverter for non-stop operation up to 8,200 sheets/h fast

Condition: good (used), Code: 0404 Brand: HAMMER - FELDER GROUP Model: A3 - 31 - CE Standard 2-works combined machine (Surface Planer/Thickness planer ) for joinery, furniture, joinery fittings, custom-made furniture, plastic and various – CE Standard Technical specifications: Planer width 310 mm Table length 1400 mm Tilting guide 90-45° Three-phase motor v. 380 4 Hp Guodpfjzcqmfex Acfjc Planer shaft with 3 knives Max chip removal 4 mm Thickness table width 306 mm Thickness table length 540 mm Min workpiece length 145 mm Thickness feed speed 6 mt/min Suction inlet diameter 120 mm Overall dimensions mm 1450 x 600 x 1000 h Weight kg 290

Condition: like new (used), Year of construction: 2020, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Gjdszcyr Dspfx Acfjuc Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: good (used), Code: 0403 Brand: SICAR Model: BRAVA 350/3 - CE Standard 3-works combined machine (Surface planer /Thickness planer /Mortiser) for wood, joinery, furniture, joinery fittings, plastics and various – CE Standard Technical specifications: Working width 350 mm Gujdpezcfwxefx Acfsc Work surface length 1600 mm Tilting of fenknives Knives dimensions 350 x 20 x 3 mm Thickness planer table dimensions 350 x 660 mm Max working height 220 mm Min working height 7 mm Feed speed 7 mt/min Router: Table dimensions 250 x 500 mm Longitudinal stroke 200 mm Transversal stroke 100 mm Vertical stroke 90 mm Chuck 16 mm Chuck rotation speed 5700 rpm Workpiece clamping presser Three-phase motor 2,2 Kw Overall dimensions mm 1700 x 950 x 1000 h Weight kg 340

Condition: new, Year of construction: 2025, Holzkraft Combined planer-thicknesser - immediately available - Ideal for demanding craftsmen and carpenters The extra long planing tables made of one piece allow easy planing of the workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Guodpfxsih Dxdo Acfsc Dressing tables open simultaneously to the rear with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during retooling, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Kdf9ktm Weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thickness table Length 850 mm Thickness table width 520 mm Working height min. 3 mm Working height max. 240 mm working length min. 220 mm chip removal max. 5 mm Electrical data Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ planing width max. 520 mm Feed rate speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Gusdpfx Acjhkz E Tjfjc Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: as good as new (ex-display), Year of construction: 2025, Planer Thicknesser with TERSA Planer blade quick change system. With TERSA quick-change system for fast planing blade replacement TERSA Planer blade system allows for especially quiet running Diagonally serrated steel feed roller for constant and uniform material feed Robust dressing tables made of ribbed grey cast iron, milled and stress-free, this resistant and durable plan Large, pivoting dressing stop for precise alignment, 90 ° / 45 °, with quick clamping Back opening dressing table Powerful motor Robust steel / cast iron construction Milling can be retrofitted Equipment details TERSA Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Guedpfx Aodqy Uqecfsc Particularly low noise Perfect plane results Surface Planer Fitted as standard with the TERSA Planer blade quick change system Large dressing tables The dressing and fixed width tables made of grey greeting guarantee highest quietness and vibration-free. Thickness Planer With the powerful thickness feed, workpieces can be planed up to 200 mm height. The helical feed roller guarantees the constant feeding. The conversion of Abrichtzu thickness Planer is in seconds with one hand. Drive Stable-focused chain drive Steel drive wheels Massive cast iron pillow block Planing mill Massive arrestors prevent kickback of workpiece

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Gusdpfxocnxaye Acfec Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: new, Year of construction: 2026, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Gujdpscnxa Ssfx Acfec Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Gjdpfxsff Hdpe Acfjuc Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]