Used Bending Press Multiprogram for sale (14,217)

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Ppedpfxsxnikls Aczsu

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Psdpfjw Nbh Hsx Aczjpu Contact to set up in person inspection.

Condition: excellent (used), Year of construction: 2017, Technical Specifications: Total pressing force 1500 kN Setting range 10 – 100 % Total pressing surface 3100 x 1350 mm Specific pressure at full charge 3,6 daN/cm² (kp/cm²) 6 cylinders 90 mm diameter 400 mm stroke Operating hydraulic pressure 395 bar Daylight height 400 mm Daylights 2 Daylight opening 150 mm Pjdpfjzd T Uysx Aczepu 400V 50Kz 3 phase CE 3 pieces heating devices each with 18 kW for heating up the fluid medium water to a working temperature of 130°C.

Condition: good (used), Year of construction: 1991, Electric workshop hydraulic press Capacity: 50 tons. Table width: 800 mm, cylinder stroke: 200 mm. Podpfozhfzmox Aczjpu

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 2008 Machine weight: 19500 kg Machine height: 3250 mm Machine length: 5350 mm Machine depth: 2450 mm Control system: ER 70 Travel range, X-axis: 750 mm Press force: 300 tons Working length: 4100 mm Podpfxezhn Nao Aczepu Column spacing: 3550 mm Upper support: BBombering: CNC

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling Psdpfxsu R Sxxe Aczjpu - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: good (used), Year of construction: 1991, Used squaring shear from Haco Type TS 3012 Capacity: 3050 x 12 mm Podpfx Aezhbgloczspu Adjustable back gauge Blades recently sharpened

Condition: excellent (used), Continuous pasta press for short and long pasta. Bought for a project and never used. Pjdpfx Acsyh Rdfezjpu

Condition: used, Year of construction: 1995, total length: 2,900 mm, total width: 1,000 mm, total height: 1,400 mm, Colour: Green Empty weight: 4.500 kg Price: On request - Year: 1995 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 34010 HV - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 15.0 Ppsdpfxezhbhce Aczju - Shaft diameter [mm]: 135 - Moment of resistance [cm³]: 120 - Top roll diameter [mm]: 390 - Bottom roll diameter [mm]: 390 - Capacity diameter round [mm]: 90 - Options: 3D rolling, Digital readout, Extra rolls - Transport dimensions: 2900mm x 1000mm x 1400mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1992, Used 4-meter CNC press brake from Haco Type: PPES 40200 Capacity: 4100 x 200 tons FastBend 2D CNC control (refurbished!) 1 set of complete tooling (not visible in the pictures, but included) Ppodpfjzgt Tzjx Aczou CNC crowning Euro-style tool clamping system

Condition: good (used), Used 40-ton bending press from Amga Podpfjzgtl Djx Aczjpu Type: BP 40 Heavy-duty design Includes accessories.

Condition: used, Year of construction: 2023, machine/vehicle number: H300SV23-17, pressing force: 300 t, stroke length: 1,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 21,000 kg, die cushion force: 130 t, die cushion stroke: 300 mm, Control and basic data • Control: SIEMENS PLC • Pressing force / capacity: 300 t • Motor power: 30 kW • Year of manufacture: 2023 • Serial number: H300SV23-17 Pjdpfxjzhlg Ae Aczepu Pressing area • Cylinder diameter: 380 mm • Stroke: 1000 mm • Tool dimensions (max.): 1400 × 1200 mm • Tool weight (max.): 5,000 kg Drawing cushion • Drawing cushion stroke: 300 mm • Drawing cushion force: 130 t Speeds • Feed speed: 160 mm/s • Return speed: 200 mm/s Hydraulics and connection values • Pump output: 103 l/min • Oil volume: 1100 l • Operating pressure: 243 bar • Operating voltage: 380 V • Frequency: 50 Hz • Max. current: 60 A The machine is available immediately, has already been dismantled, and can be inspected.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Further used machines by Mabu, Bruderer, Bihler and Schaal are available for sale from our stock. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Ppjdpozab Ibofx Aczsu Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: good (used), Year of construction: 2006, control type: CNC control, actuation type: hydraulic, controller manufacturer: PC 300 TOUCH, number of rollers: 3, shaft diameter: 105 mm, overall weight: 2,200 kg, total length: 1,850 mm, total width: 1,600 mm, total height: 1,400 mm, Profile bending machine PBT - PBT 35 MACH-ID 9661 Make: PBT Type: PBT 35 Control: PC 300 TOUCH Year: 2006 Front rollers vario adjustable 360 - 1100 mm Power 11 kW each Force pressure in X-Axis 35.000 Kg Hydraulic drive variomatic UNP 200 x 1200 mm T 100 x 100 x 10 x 1200 mm Bar 80 x 80 x 1400 mm Pipe 180 x 2000 mm Horizontal and vertical:Vertical Shaft Ø: 105mm Number of rolls: 3 Podpozguqnefx Aczopu Stroke X-Axis: 390mm Resistance moment: 3000 NmCM³ Working speed: 1 - 16 U/Minmm/min. Length: 1850mm Width: 1600mm Height: 1400mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, operating hours: 74,000,000 h, MAN ROLAND 205 E0B • 5-color • Max. format: 520 mm x 740 mm • ProfitPlus Premium package including: - Double sheet feeder - Baldwin cleaning unit - Complete carton guide - EPL (Ergonomic Plate Loading) • Kersten antistatic system • Bacher register system • Powder sprayer: Grafix 72 Digital Plus • Alcosmart • PressManager Smart Interface Ppodpfx Ajytb Egeczeu • Smart R 200 Online • Remote control: RCI for ink and register • ColorPilot Smart • Automatic wash-up device for: - Ink rollers, impression cylinders, blanket cylinders • Electronic sheet feeding control • Nonstop delivery • Delivery-side control panel • JobCard Reader • Carton device • In production • Location: Germany • Availability: immediately

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Pedpey S Rqwofx Aczopu Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame Ppodpfx Aoy R Nnfsczju • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Pedovviytopfx Aczopu

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Ppsdpfovvkmbsx Aczou Storage location: Nattheim

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Ppsdpfx Acjvvkl Dszeu Storage location: Nattheim

Condition: used, Year of construction: 1991, Plate size: 3600 x 1350 mm Total pressing force: 160 t Specific pressing force: 3.5 - 5.0 kg/cm² Operating pressure max.: 320 bar Pressure cylinders: 8 x 90 St/DM mm Opening width: 400 mm Weight approx. 8300 kg Dimensions: 4130 x 1520 x 2150 mm Psdpfoy Hrzmjx Aczspu Functionally tested = new top plates (gold anodized) Location: Nattheim

Condition: excellent (used), Year of construction: 2014, power: 5.5 kW (7.48 HP), pressing force: 40 t, table width: 100 mm, table length: 2,100 mm, throat depth: 300 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ppsdpfxjzgfv Uj Aczeu

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film Ppsdpjzgvbujfx Aczsu The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available for you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: good (used), Year of construction: 2016, operating hours: 1,060 h, functionality: fully functional, Baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Ppjdpfx Ajy Ni Sheczeu Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. The hydraulic hoses should be replaced. We will gladly answer any questions you have about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available to you from 08:00 to 13:00. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Bale press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available from 8:00 a.m. to 1:00 p.m. Pedpfsy Ni I Aox Aczspu Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.