Used Leitz Reference Hp 5.4.3 for sale (9,107)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum Filler Vemag HP 20E Vacuum Filler Brand Vemag Model HP20E Year of production 2011 Codpowim Umefx Aa Tehc Power 20kW Voltage 400-460V 37A 3~50/60Hz

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Chodpszk Npgefx Aa Toc Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: used, Duct Fan Coral PAP HP 7,5 Kanalventilator Absaugung - Duct Fan Coral PAP HP 7,5 (Absaugung - Extraction) Baujahr / Year 2003 HP 7,5 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Chjdpfsz Hw Dnox Aa Tsc Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm Condition: used Chedpfx Aozdvcaea Tec Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Year of construction: 2020, condition: ready for operation (used), A Vollmer CNC 5-axis tool grinding machine for the manufacture and regrinding of solid carbide rotary tools is available. Grinding spindle interface: HSK50, max. workpiece diameter: 100mm, max. workpiece length: 360mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 350mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control system: Vollmer. Including automatic workpiece magazine HP160. Documentation available. An on-site inspection is possible. Chjdpfx Aszg Ir Esa Tjc

Year of construction: 2021, condition: ready for operation (used), A Vollmer CNC 5-axis tool grinding machine for the complete machining of solid carbide rotary tools is available. Tool holder: HSK50, tool positions: 8, max. workpiece length: 340mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 330mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control: Vollmer. Including automatic HP160 workpiece magazine. Documentation available. An on-site inspection is possible. Chsdpfx Aozg Ir Ssa Tsc

Year of construction: 2022, condition: ready for operation (used), A Vollmer CNC 5-axis tool grinding machine for the complete machining of solid carbide rotary tools is available. Tool holder: HSK50, tool positions: 8, max. workpiece length: 340mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 330mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control: Vollmer. Including automatic HP160 workpiece magazine. Documentation available. An on-site inspection is possible. Chjdozg Itcjpfx Aa Tjc

Condition: good (used), functionality: fully functional, grinding wheel diameter: 720 mm, grinding width: 225 mm, Double-disc fine grinding machine Highest stability thanks to full granite construction Visualized control Siemens S7 control Strong drive power, total 55 KW 3 separate drives with freely programmable rotation directions and ramps 6 runner discs Comprehensive service and monitoring software Working discs by arrangement (optional, extra charge) Auxiliary unit centrifuge (optional, extra charge) Codpswrpawofx Aa Tshc

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Chsdpfoy A Tpqjx Aa Toc Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, Year of construction: 1991, 1 hydraulic punching machine, manufacturer MUBEA, type HP 1000 / 760. Year of manufacture 1991, punching force 100 tons. Includes punching saddle for K 60-K260 and various tools, manually operated linear punching unit (grid rail 4 m), swiveling and with digital display, carriage clamp, and foot switch. Dimensions L x W x H: 1930 x 780 x 1980 mm. Outreach: 760 mm. Chodpfezkg Sljx Aa Toc Working height: 1135 mm. Punch: 40 in 22 mm. Stroke: 0 - 70 strokes. Stroke rate at full stroke: 11 strokes. Drive power: 8.5 kW. Weight: 3800 kg / 3600 kg. Used, in working order.

Condition: repair required (used), Year of construction: 2018, functionality: not functional, machine/vehicle number: SG65Q11001, Everything is still quiet. Chodpfoy Siqiox Aa Toc

Condition: excellent (used), SCM K360 HP Edge Banding Machine Liquids Pre-milling cutters, Plate heating Pre-heating unit Edge banding application with roller, Replaceable tank Features a glue drain Pneumatic pre-trimming cutter, Liquids Finished edge trimming cutters Top and bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine features NC control Max. component height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Original mileage less than 30,000 meters, in my opinion, the technical condition is very good Inspection and testing possible on site. Chodpezwd Ikjfx Aa Tec

Condition: excellent (used), functionality: fully functional, power: 735.5 kW (1,000.00 HP), Year of construction: 2015, Oil drilling rig National 80 UE 1000 HP Chsdpfxsx Nc Ddj Aa Tjc Year of manufacture: 2015 Fully operational

Condition: used, Year of construction: 1978, first registration: 06/1978, color: green, Equipment: trailer coupling, = Additional options and accessories = - Power steering = Further information = Odometer reading: 15,715 km Chsdoxdvqqjpfx Aa Tec Drive: All-wheel drive Unladen weight: 3,950 kg Gross vehicle weight: 3,950 kg Manufacturer: Mercedes Benz, Mercedes Benzstrasse 100, 70372 Stuttgart, DE

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Dimension : 110 x 103 x 150 cm Technical documentation available Chjdpfx Aaozcznye Tjc

Condition: ready for operation (used), functionality: fully functional, Whirlwind K 855 HP 7.5 / Industrial Dry Vacuum Cleaner - CE marking - Like-new condition - Motor power: 5.5 kW - Filter area: 1.2 m2 - Container volume: 60 liters Chedpfezx Rtiox Aa Tec - Airflow: 135 liters/second - Vacuum: approx. 300 mbar - Suction hose - Connection cable Dimensions: L x W x H 1.2 x 0.6 x 1.4 meters / Weight: 125 kg Errors and omissions excepted.

Condition: used, Year of construction: 1997, functionality: fully functional, Kallfass KFP-4000-4 destacking unit Codezty Raepfx Aa Tohc Package length: 2500 mm Feeding to the edge bander infeed conveyor Spacer conveyor

Condition: excellent (used), SCM K560 HP Edge Bander Liquids Pre-milling cutters, Roller glue application, Replaceable tank Features a glue drain Pneumatic pre-trimming guillotine, Liquids Finished edge trimming knives Top-and-bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edge trimming cutter (multi R1-R2), Liquids Flat edge trimming cutter, Polishing unit The machine has CNC control Max. workpiece height 60mm Max. veneer thickness in roll 3mm, Codjzlta Sepfx Aa Tehc Feed rate 12 and 18 m/min Inspection and testing possible on-site

Condition: good (used), Year of construction: 2017, operating hours: 470,000 h, functionality: fully functional, machine/vehicle number: 1HA06A, overall weight: 2,200 kg, type of input current: three-phase, total width: 12,000 mm, total length: 40,000 mm, total height: 1,600 mm, power: 11 kW (14.96 HP), working width: 3,200 mm, number of ink cartridges: 6, used machine, working state Chodpfx Aasttunys Tec

Condition: ready for operation (used), Year of construction: 2019, Product length: 100-600mm, product width: 100-400mm, max. product height: 220mm, max. output: 30 cycles/min. With documentation, 22m long conveyor belt, e-commerce applications and many spare parts. Several pallets with roll film are available. On-site inspection is possible. Cedpewal Iasfx Aa Tshc

Year of construction: 1992, condition: excellent (used), functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg Codsq I R N Ropfx Aa Tjhc in laboratory quality, 350x250x50mm Perpendicularity 1µm 4-sided! Measurement report on request for an extra charge

Condition: good (used), End Roller Stands, Manufacturer: Peddinghaus Codpfxoz Aybqe Aa Tshc Height adjustable from 0.68 m to 1.1 m 2 rollers, total width: 260 mm Roller diameter: 108 mm Tube diameter (top – bottom): 70 mm – 90 mm Base plate diameter: 500 mm Approximate weight: 40 kg

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Chjdpfx Aajzkl Tbj Tec Max. press width: 1250 mm Total pressing force: 80 t Specific pressing force: 2.5 kg/cm² Press opening width: 400 mm Heating plate material: standard aluminum Operation: button control Swivel button: Yes Number of pressure pistons: 4 Safety edge strip: Yes Condition of heating plate: good Weight: 3800 kg Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Year of construction: 1996, condition: used, machine/vehicle number: 7200124-01, For sale is a high-pressure pump from the company Abel, manufactured in 1996. Flow rate: 19 m³/h Pressure: 10.0 MPa Oil volume: 7.5 dm³ Stroke rate: 420 1/min Chsdpfx Ajzwk H Toa Tec The pump can be inspected upon request.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment • Barcode reader Chedpfozuhcgjx Aa Tec • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS