Second-hand machinery for sale (200,000)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours EQUIPMENT Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Iajdsza Urgjpfx Adreu Sheet thickness max.: 8 mm Punching force max.: 180 kN Workpiece weight max.: 230 kg

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Dimensions (L x W): 2,100 x 730 mm Iaedezargnepfx Adrou Note: Water bath and granulator can be purchased for an additional charge.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 250 mm, cutting width (max.): 280 mm, saw band length: 2,950 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw band dimensions: 2,950 x 27 x 0.9 mm Iasdpjzapxzofx Adreu Speed: 15-100 m/min Vise opening: 285 mm Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 220 mm Cutting capacity at 90° (rectangular): 280 x 220 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (rectangular): 140 x 100 mm Cutting capacity at 45° (round): 230/200 mm Cutting capacity at 45° (square): 200/170 mm Cutting capacity at 45° (rectangular): 220 x 200/200 x 140 mm Control: conventional MACHINE DETAILS Total power requirement: 2.2 kW Weight: 990 kg Machine dimensions: 2,500 x 2,230 x 2,050 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 320 mm, saw band length: 3,150 mm, saw band speed: 667 mm/s, saw band width: 25 mm, TECHNICAL DETAILS Iodpezapv Tsfx Adrsau Saw band dimensions: 3,150 x 25.4 x 0.9 mm Speed 1: 20 m/min Speed 2: 40 m/min Cutting capacity at 90° (round): 260 mm Cutting capacity at 90° (square): 250 mm Cutting capacity at 90° (flat): 320 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 210 mm Cutting capacity at 45° (flat): 240 x 200 mm Control: NC EQUIPMENT - Saw band storage

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 280 mm, cutting width (max.): 330 mm, saw band length: 3,650 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw blade dimensions: 3,650 x 27 x 0.9 mm Speed: 15/100 m/min Cutting capacity at 90° round: 280 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Cutting capacity at 60° flat: 170 x 170 mm MACHINE DETAILS Iaodpfx Ajzaptrodrsu Total power requirement: 2.2 kW Weight: 1,240 kg Vise: 340 mm Dimensions: 2,020 x 2,040 x 1,740 mm EQUIPMENT - Roller conveyor 2,000 mm

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Iaedpfx Adey U U Nporeu Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 18,649 h, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Working area (L x W): 3,000 mm x 1,500 mm Laser power: 5,000 W Sheet metal thickness, mild steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm MACHINE DETAILS Control system: CNC Operating hours NC ON: 38,900 h Operating hours Laser ON: 39,498 h Operating hours Beam ON: 18,649 h As of January 22, 2026 Machine weight: 12,000 kg Iaedpfxoy U U I Se Adrju

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Sheet metal thickness - max.: 6.4 mm Punching diameter: 76.2 mm Iasdpfjy U U Edox Adreu Travel distance X-axis: 2,500 mm Travel distance Y-axis: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed (rotary axis): 360 °/sec Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions: 6,400 x 5,800 x 2,100 mm Machine weight approx.: 11,050 kg Operating hours: 30,430 h

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (max.): 22,000 rpm, controller model: Heidenhain 4290, Submitting a bid obligates the buyer to collect the machine by June 24, 2026! The machine will be dismantled on June 17, 2026, and then stored temporarily. The Z1 linear guide was recently renewed, and the S2 revolver drive was recently replaced. TECHNICAL DETAILS Turning length: 600 mm Turning diameter over cross slide: 410 mm Spindle speed: 22,000 rpm Tool turret: 12-position Tool holder: VDI 40 MACHINE DETAILS Iasdpfozcpwcsx Adreu Control system: Heidenhain 4290 Operating hours Total operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h EQUIPMENT Large accessories package Powered tools from WTO Note: The seller can offer transport of the machine within Europe for an additional fee (offer upon request).

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Isdpfx Aeza D Rfjdrjau TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! Iodpfoza D Iwsx Adreau TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm MACHINE DETAILS Operating hours Iaedpszc Euqefx Adrju Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Power source: Hypertherm Powermax 65 Pin marker TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, edge thickness (max.): 20 mm, feed rate X-axis: 18 m/min, year of last overhaul: 2025, The machine underwent a complete overhaul on November 10, 2025, and was fitted with two new adhesive tanks. The machine has been serviced annually; in 2023, the software and computer system were completely replaced. The machine is equipped with the following units: Gluing/pre-coating unit Pressing zone Cutting unit (HL) Milling unit (MFL) Profiling unit (PN) Polishing unit (SM) Gluing system FE-MA-TECH Advanced PUR 2 kg TECHNICAL DETAILS Feed speed: 18 m/min Panel thickness: 10 - 60 mm Edge thickness: 0.3 - 20 mm MACHINE DETAILS Iasdpfxezap H Ss Adrou Gluing system: FE-MA-TECH Advanced PUR 2 kg

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AA1/018167, functionality: fully functional, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 180 mm, number of axes: 5, number of slots in tool magazine: 26, TECHNICAL DETAILS Workpiece length (max.): 3,300 mm Workpiece width (max.): 1,400 mm Workpiece height (max.): 180 mm Number of axes: 5 Number of tool slots in the tool magazine: 26 MACHINE DETAILS Control system & software: Maestro Version 1.00.022.1034 Input voltage: 400 V Input current: 59 A Dimensions (L x W x H): 6,000 x 3,500 x 3,500 mm EQUIPMENT Documentation/Manual Includes Clemex system Additional licenses: 1 3D dongle, 2 2D dongles Iodpjzarfdsfx Adrjau Tool package with approx. 20 milling cutters (including DIA milling cutters, indexable insert milling cutters, roughing milling cutters, T-slot milling cutters, and rounding milling cutters) Palette CAD Two licenses for Palette CAD Vacuum pump: Type Q2EFA132M6C-34

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 700 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! Machining center with a manually rotatable and swiveling machine table! TECHNICAL DETAILS Travel ranges x-axis: 500 mm y-axis: 400 mm z-axis: 400 mm Table Table surface: 700 x 500 mm Spindle Tool holder: 40 SK/ISO Spindle speeds: 20 - 4,500 rpm Spindle drive: 12 kW Feed rates Iaodpfx Adozb Uz Dsreu Feed rates: 5,000 mm/min Control system: Heidenhain TNC 124 MACHINE DETAILS Total power requirement: 13 kW Machine weight: approx. 2,800 kg Space requirement: approx. 3 x 2 x 2 m

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: YS-2674, turning height: 1,250 mm, workpiece weight (max.): 5,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Faceplate diameter: 1,250 mm Max. torque on faceplate: 12,500 Nm Turning height: 1,250 mm Max. turning diameter: 1,600 mm Max. workpiece weight: 5,000 kg Table speed: 2 - 300 rpm Travel range X-axis: 1,475 mm Travel range Z-axis: 900 mm Rapid traverse: 10 m/min Spindle taper: ISO BT50 Number of tool positions: 12 MACHINE DETAILS Control system: Fanuc 0i-TD Total power: 75 kW Dimensions & Weight Footprint: approx. 4.7 x 5.8 x 5.5 m Machine weight: approx. 32 t EQUIPMENT Tool changer magazine for 12 turning tools with BT 50 shank Isdpfx Ajzb Uy Tsdrjau Note: The €5,000 for dismantling and loading applies to the preparation for EU transport. Preparation for sea transport is possible; costs upon request.

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 8900, functionality: fully functional, pressing force: 20 t, stroke length: 60 mm, throat depth: 176 mm, ram adjustment: 55 mm, stroke rate (max.): 155 1/min, TECHNICAL DETAILS Pressing force: 20 t Stroke rate: 155 strokes/min Ram stroke: 6 - 60 mm Ram adjustment: 55 mm Ram contact area: 130 x 248 mm Dowel hole in the ram: 25 x 65 mm Inclination: 28 ° Iodpfszb Du Hex Adrjau Overhang: 176 mm Distance from table to ram: 270 mm Passage width: 470 mm Table dimensions: 300 x 450 mm Through hole in the table: 90 mm Table height above floor: 775 mm Air pressure (required): 5.5 - 6 bar MACHINE DETAILS Total power consumption: 3.5 kW Control type: conventional Dimensions & Weight Machine dimensions (L x W x H): 1,300 x 1,100 x 1,950 m Machine weight: 1 t EQUIPMENT High-performance press Central lubrication with light curtain (monitored) Linuflex Stroke counter Steel plate (dimensions: 315 x 400 x 50 mm) with center hole (diameter: 63 mm)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 13230, wheel width: 25 mm, wheel diameter: 130 mm, controller model: Siemens 840D, spindle diameter: 85 mm, stroke rate (max.): 2,500 1/min, TECHNICAL DETAILS Wheel diameter max.: 130 mm Wheel width: 25 mm Module max.: 3 Module min.: 0.5 Spindle bore diameter: 85 mm Stroke rate: 500 - 2,500 strokes/min (continuously variable) Stroke: 30 mm MACHINE DETAILS Control model: Siemens 840D Total power requirement: 48 kVA Dimensions & Weight Footprint (L x W x H): 4,700 x 3,000 x 3,300 m Iodpjzb Dtcefx Adrsau Machine weight approx.: 11.5 t EQUIPMENT Tailstock with point Chip conveyor Hydraulically actuated tailstock arm and linear guides

Condition: repair required (used), Year of construction: 1987, functionality: not functional, machine/vehicle number: 12156, travel distance X-axis: 1,985 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,490 mm, spindle speed (max.): 1,250 rpm, workpiece weight (max.): 6,300 kg, TECHNICAL DETAILS Spindle diameter: 110 mm Drilling spindle speed range: 6.3 - 1,250 rpm (in 4 steps) Facing head speed range: 6.3 - 315 rpm (in 2 steps) Travel in X-axis: 1,985 mm Travel in Y-axis: 1,270 mm Travel in Z-axis: 1,260 mm (with tailstock 1,490 mm) Travel in W-axis (spindle longitudinal): 710 mm Travel in U-axis (facing slide radial): 250 mm Table size: 1,600 x 1,400 mm Table load capacity: 6.3 t Iasdpfxezb Dqbo Adrsu Table rotation range: 360° Tool holder: ISO 50 Feed rate steps for table and spindle head vertical: 5 - 2,500 mm/min Turning diameter for drilling max.: 630 mm Turning diameter for facing max.: 1,250 mm MACHINE DETAILS Control system: NC Control for program: Heidenhain 320 Total power requirement: approx. 90 kW Machine weight: approx. 30 t EQUIPMENT Tailstock Facing slide 700 Electronic handwheel Note: Currently, the machine has an electrical fault and requires repair!

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 22076049, wire diameter (max.): 9 mm, power: 18 kW (24.47 HP), spring diameter: 120 mm, wire diameter (min.): 2 mm, production capacity: 5,400 unit/h, The machine was equipped with a new control system in the year 2000! A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right-hand and left-hand coiled compression and tension springs, as well as leg springs. The springs can be produced with any desired pitch and spring body shape. TECHNICAL DETAILS Wire diameter max.: 9 mm Wire diameter min.: 2 mm Production capacity max.: 90 pieces/min Outer spring diameter: 10 - 120 mm Wire feed speed: 27 - 80 m/min Wire feed length: unlimited Two-finger system Wire thickness: 2 - 9 mm Outer spring diameter: 10 - 120 mm Single-finger system Wire thickness: 3 - 7 mm Outer spring diameter max.: 60 mm MACHINE DETAILS Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Dimensions & Weight Machine dimensions (L x W x H): 3,300 x 1,500 x 1,450 mm Lubrication system dimensions (L x W x H): 830 x 650 x 1,000 mm Control cabinet dimensions (L x W x H): 700 x 1,500 x 1,750 mm Machine weight: approx. 5 t Iaodpfx Adezb Dapjrsu EQUIPMENT 5x feed rollers, wire holder 3 mm, two-finger Spring length measuring device (Model: LION PRECISION-PANTHER) Wire coil holder POST, motor-driven, mandrel holder (diameter: 1,400 mm) Lubrication system Control cabinet cooler RITA Hydraulic unit

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software Iedpozcda Sofx Adrsau FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Iodeza Alhspfx Adroau Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: ready for operation (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, total height: 1,000 mm, total width: 550 mm, total length: 1,200 mm, laser power: 1,500 W, laser wavelength: 1,075 nm, ambient temperature (max.): 45 °C, The machine is in very good condition with less than 300 operating hours! TECHNICAL DETAILS Laser power at the workpiece: 1,500 W Wavelength: 1,075 ± 5 nm Type of laser beam delivery cable: LLK-A / BF 10 Laser safety Laser protection class: 4 Performance Level Emergency Stop button (PLE) TSS – Triple Security System Installation conditions and options Ambient temperature: 5–45 °C Integrated cooling Operating concept Machine control: Touch panel Programmable channels: 9 WLAN MACHINE DETAILS Ijdjzb Nl Rjpfx Adrsau Dimensions (W x H x D): 550 × 1,000 × 1,200 mm EQUIPMENT Integrated pilot laser BLT laser welding device PenWelder Laser beam delivery cable Connection cable Contact tips and guide rail Configurable access control OPC-UA interface Remote service

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Ijdpfx Aezcwupsdrsau Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 5,929 h, functionality: fully functional, center height: 100 mm, grinding length: 400 mm, center width: 400 mm, grinding wheel diameter: 350 mm, grinding wheel width: 30 mm, The machine was overhauled in 2026! TECHNICAL DETAILS Grinding length: 400 mm Center height: 100 mm Distance between centers: 400 mm Max. workpiece weight in the tailstock between centers: 20 kg Grinding wheel diameter max.: 350 mm Grinding wheel width: 30 mm Grinding wheel bore: 127 mm Working feed rate Z-axis: 100 - 3,500 mm/min Table swivel: 0 - 30° Power of grinding spindle motor: 3 kW Speed of workpiece spindle: 30 - 1,200 rpm Power of workpiece spindle: 0.5 kW Tailstock arbor: MT2 Quill stroke: 20 mm Iasdpoza Ea Isfx Adrsu MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,350 x 1,480 mm Weight: 1,600 kg