Used Versalift Various Machines for sale (64,087)

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg Dsb Ecwju R Sz Teqxecg - new exhibition machine -

Condition: used, Year of construction: 1992, Hydraulic Guillotine Shear Manufacturer: RAS Type 86.40 4040x5mm Year of Manufacture: 1992 Deb Ecwjwhv Hijqxecg Technical Specifications Manufacturer: RAS Type: 86.40 Year of Manufacture: 1992 Usable Length: 4040 mm Sheet Thickness: 5.0 mm 20 Hold-Down Clamps Dimensions: L 4.7 x W 2.20 (plus 1.2 m support arms) x H 1.75 m Weight: 7.7 t Equipment • Angle Stop • Support Arms • Pneumatic Sheet Holding Device with Tilting Roller Table Height Adjustment • Motorized Cutting Gap Adjustment • Multicut-Eco 2000 Control System • Original Scrap Cart • Small Parts Diverter to the Front • Documentation All information is provided without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1994, Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  Capacity: up to 9,000 bph Formats: 75cl cider glass bottles Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Zalkin CA6 Solo Screw Capper Cap hopper with pneumatic system Debjwhkraj Ecwqxocg

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Dob Ecweu R S Dhoqxscg Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Dcsb Ecwsu R S A Dsqxsg Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: used, Four-sided planer SCM Sintex XT -used- Reversible blade system, Lubricant pump, Tersa ----- Technical data ----- Planing width: 180 mm, Planing height: 105 mm, Number of spindles: 4, Motor spindle 1 + 4: 7.5 kW, Motor spindle 2 + 3: 7.5 kW, Dcob Ecwov Dagmeqxjg Feed speeds: 6/12 rpm, Suction nozzle Ø: 150 mm, Dimensions (LxWxH): 2,700 x1,000x1,700 mm, Weight: 885 kg

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, Dobou R Sx Es Ecwqxecg can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Deb Ecou R Sypowqxecg Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - Dob Eeu R S Hcjcwqxocg - new exhibition machine -

Condition: new, CASADEI XENIA 40 panel saw - Exhibition machine - Pre-scoring unit, pivotable, parallel stop with fine adjustment, outrigger table ----- Technical data ----- Edging length: 3,200 mm, max. cutting height at 90/45°: 140 /97 mm, cutting width with parallel stop: 1,270 mm, saw blade swivel: 90 - 45 °, max. saw blade Ø: 400 mm, pre-scoring saw blade Ø: 120 mm, speeds: 3,700 rpm, speeds of pre-scoring saw blade: 8,500 rpm, motor 400 V: 7.0 kW, Dcsb Ecsvtmzcewqxog motor of pre-scoring motor: 0.9 kW, extraction nozzle Ø: each 1 x 120 / 80 mm, Weight: 661 kg - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - Dobsu R S Awo Ecwqxecg ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container Dsb Eju R Sxxscwqxscg - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Dcob Ecwqeu R S Dboxeg Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Dceb Ecwqju R Sztsxjg Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Dobjvtrkie Ecwqxocg Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Dcjb Ecju R Szaowqxsg Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: new, Wide belt sander CASADEI LIBRA 10/95 TC Promotional model from stock -Working table height adjustment with electronic display of the working height -Oscillation of the sanding belts with electronic system -Rubber-coated grooved pressure roller at infeed 1° Position with backstop -Grooved calibration steel roller -Switching the sanding pad on and off from the control panel -Switching the roller on and off from the control panel -Fox 500 KTR electronic control unit Dob Ecwou R S D Ueqxocg -Table extension with 2 rollers in the infeed and outfeed -Automatic table positioning: automatic adjustment of the work table height automatically via microswitch without correction of the material removalDimensions and dimensions and weights: - Length (product) approx.: 1388 mm - Width/depth (product) approx.: 1545 mm - Height (product) approx.: 1668 mm Suction connection: - Suction nozzle diameter: 140 mm Electrical data: - Power feed motor: 0.33 / 0.55 kW - Drive motor output: 7.5 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - Height adjustment motor power: 0.25 kW Sanding unit: - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Sanding width max.: 950 mm Feed unit: - Feed speed: 4.5 / 9 m/min Workpiece: - Workpiece height min.: 4 mm - Workpiece height max.: 170 mm Subject to prior sale. - new exhibition machine -

Condition: excellent (used), HOLZ-HER Streamer 1057 edge banding machine - used - Control with LCD display, pivoting control panel, manual, self-clamping pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutters for up- and down-feed, strip magazine, standby function, GluJet cartridge system, cartridge system with tactile nozzle, use of PUR adhesives possible, printing unit with driven roller, pneumatic control of the printing unit, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, diamond-coated trimming tools, corner rounding unit with diamond-coated cutter, radius scraper, Dob Ecwswakrwoqxjcg chip catcher for radius scraper, surface scraper, Blow nozzle on the surface scraper ----- Technical specifications ----- Edge thickness for rolled material: 3 mm, Edge thickness for strip material: 5 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min., Distance to workpiece support: 600 mm, Support plate diameter for edge material: 800 mm, Cut-off knife for rolled material up to: 3 mm, Heat-up time: 3.5 min., Joining cutter power: 1.2/0.8 kW, Cut-off saw power: 2 x 0.45 kW, Milling station power: 2 x 0.6 kW, Corner rounding power: 0.3 kW, Extraction nozzle diameter of jointing milling unit: 2 x 80 mm, Extraction nozzle Miter saw diameter: 2 x 70 mm, Extraction nozzle diameter of milling unit: 100 mm, Extraction nozzle diameter of scraper unit: 120 mm, Compressed air connection: 6 bar, Total length: 4,630 mm, Dimensions (LxWxH): 4,630 x 1,200 x 1,630 mm, Weight: 1,200 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, MASTERWOOD TF100 machining center -used- Machining in throughfeed, Air table at the working area, Ball screw spindles on all axes, Network card for remote maintenance, integrated control cabinet, Sawing unit for grooving in X-direction, Manual central lubrication, Sensor for panel measurement, Windows 10 PC, new drill set, new DIA milling cutter ----- Technical data ----- min. Workpiece length X: 250 mm, min. Workpiece length Y: 80 mm, min. Workpiece thickness: 10 mm, max. workpiece length X: unlimited mm, max. workpiece length Y: 1000 mm, max. workpiece thickness: 60 mm, Operating system: Windows 10, Planning software: Masterworks, Dob Ecwqsvira Njxocg Main spindle speed: 1,000 - 18,000 rpm, Drill spindle capacity: 10, No. horiz. Double drilling spindles in X-direction: 2 pcs, No. horiz. Double drilling spindles in Y-direction: 1 piece, Saw blade Ø of saw unit: 125 mm, Suction connection Ø: 150 mm, Compressed air connection: 8 bar, Dimensions (LxWxH): 1,990 x 2,410 x 1,510 mm, Weight: 1,300 kg

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Dobju R Syie Ecwqxecg Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: new, ALTENDORF F 45 EvoDrive sliding table saw with 7" touchscreen - Exhibition machine - Including: - ALTENDORF F 45 EvoDrive sliding table saw with 7" touch screen Includes: - DIGIT L angle mitre fence, ALTENDORF Cutting to length up to 3,200 mm Includes: - CNC parallel fence, 1,300 mm, ALTENDORF Traversing speed 250 mm/sec. with dimensional correction for tilted fence profile and with tilted saw blade Including: - ALTENDORF template holder Included: - Extended cutting height, 1-sided tilting ALTENDORF Saw blade projection max. 204 mm In combination with a scoring unit the max. saw blade Ø is 500 mm, or 179 mm cutting height. Includes: - 5.5 kW (7.5 HP) motor with VARIO ALTENDORF 2,000 - 6,000 rpm Includes: - Scoring unit 2-axle, 1-sided, ALTENDORF with motorized height and side adjustment Programmable scoring blade height with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - LED lighting on ALTENDORF scoring unit Including: - Double roller carriage 3,200 mm, ALTENDORF Including: - Front support roller ALTENDORF Width 300 mm - new exhibition machine - Dcob Ecwqsu R S Aqjxsg

Condition: new, HOUFEK SPB Buldog 5 RC wide belt sander -Exhibition machine- Includes: - HOUFEK SPB Buldog 5 RC wide belt sander Working width: 1,350 mm Includes: - Grooved steel roller Ø 160 mm HOUFEK Including: - HOUFEK segmenter sanding pad Debsu R Szmj Ecwqxscg electronically controlled, for width 1,350 mm Sanding pad PS 50 E Includes NC control with 10.1" touchscreen Frequency converter for the sanding unit 3-18m/s Automatic table positioning Two-zone interval blow-off device with Nozzle oscillation for sanding belt cleaning - new exhibition machine -

Condition: excellent (used), HOLZHER Evolution 7405 machining center -used- Processing in throughfeed, 4-sided milling possible, automatic suction cup positioning, hardened, dust-protected prism guides, ball screw spindles on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, handheld control unit, saw unit for grooving in X direction, pick-up tool changer, manual central lubrication ----- Technical data ----- min. workpiece length X: 200 mm, min. workpiece length Y: 70 mm, min. workpiece thickness: 8 mm, max. workpiece length X: 3,200 mm, max. workpiece length Y: 920 mm, max. workpiece thickness: 70 mm, machine control software: Campus/Hops, Main spindle motor power: 6.5 kW, Main spindle mount: HSK 63F, Drill unit motor power: 1.7 kW, Drill spindle mount: M10 fit 11mm, Number of vertical drill spindles: 9 pieces, Number of horizontal double drill spindles in X direction: 2 pieces, Number of horizontal double drill spindles in Y direction: 1 piece, Saw blade Ø of saw unit: 125 mm, Number of tools in the changer: 6 pieces, Extraction connection Ø: 2 x 120 / 1 x 140 mm, Required volume flow: 4,100 m³/h, Required static. Negative pressure: 2,500 Pa, required air speed: 30 m/s, compressed air connection: 6 - 8 bar, compressed air requirement: 300 l/min., dimensions (LxWxH): 3,680 x 1,930 x 2,340 mm Quality information: - complete basic cleaning - electrics checked Dcsb Ecwou R S Itjqxog - pneumatics checked - set according to manufacturer's specifications - ready for immediate use

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system Dcsb Esu R S Elecwqxsg for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: new, HOLZ-HER 1308 XL AURIGA POWER Edge Banding Machine -Showroom Machine- New: GLUJET GJ725 This offer is an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W - ECO MODE energy saving mode - FG201 jointing milling unit with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, counterclockwise rotation - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, clockwise rotation - 1903 edge feeder - Glu Jet GJ725 NC PUR PRO adhesive application system - 1912-3 pneumatic pressure unit - 1918 pneumatic trimming unit, 60 mm - FR301 MOT6 multi-function milling unit - Diamond cutter Ø 56/60 mm, counterclockwise rotation - Diamond cutter Ø 56/60 mm, clockwise rotation - FF301 MOT1 corner rounding unit - Scraper unit ZK301 MOT4 including high-gloss package Dcobou R Sy As Ecwqxeg - HW indexable inserts for scraper holder - Chip collection box for scraper unit - 1940 buffing unit - TR301 spraying device for the infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and adhesive quantity control - Long infeed guide, 1,252 mm - Motorized infeed guide adjustment - DW301 printing unit with motorized NC axis - Extraction hoods for 1918 trimming unit - FK701 flat scraper - GM301 spraying device after printing unit - New exhibition machine -