Used Versalift Etl-32-125 Rlc for sale (24,989)

Condition: excellent (used), Lathe Cgjb Hjtgnhuedbn Hst Make Weiler Type MD 125 Collet chuck device Hand lever cross support Speed from 110 - 3600 n1/min approx. %0 Collets Adapter for bell collets Coolant device SPH 125 mm SPW 400 mm 380 volt 1.5 kw

Condition: good (used), Load capacity: 125 kg DEMAG -Outreach: 4000mm Cgeb Hdehinkyjbn Hot -total height: 3500 mm

Condition: used, Year of construction: 1974, distance between columns 300 mm table length 3550 mm table width 190 mm table height 800 mm distance between columns 3230 mm column arm 300 mm Cob Houcgvyedbn Hegt weight of the machine ca. 12,5 t dimensions of the machine ca. 1600 x 3800 x 2800 m

Condition: used, Pneumatic cylinder FESTO DNU-40-125-PPV-A 14137. Ceb Hdjlkchrebn Hegt

Condition: used, x-axis 340 mm y-axis 300 mm grinding length 320 mm workpiece length 450 mm turning speeds 3650- 6100 U/min engine output kW swivel movement 360 Grad Cob Hotvbmzedbn Hegt dimensions 1,0 x 0,9 x 1,5 m weight of the machine ca. 0,7 t used tool grinder - clamping vice - machine light

Condition: good (used), mileage: 246,362 km, power: 92 kW (125.09 HP), first registration: 12/2014, fuel type: diesel, number of seats: 2, gearing type: mechanical, axle configuration: 4x2, emission class: euro5, color: white, wheelbase: 3,680 mm, Year of construction: 2014, Technical information Number of cylinders: 4 Engine displacement: 2,299 cc Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Dimensions Dimensions (L x W): 555 x 207 cm Weights Empty weight: 2,010 kg Cgeb Hdsvt Sd Nsbn Hst Payload: 1,490 kg GVW: 3,500 kg Condition Technical condition: good Visual condition: good

Condition: repair required (used), Witzig & Frank high-speed radial drilling machine LEO 32 AS Defects: (Clamping no longer works, running noises present) Cgsbstrnr Tj Hdbn Het

Condition: ready for operation (used), Power: 32 kW Cgebjgvl Ubj Hdbn Hst

Condition: new, Year of construction: 2025, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Csb Hdberidpwon Hogt Maximum distance of the base from the spindle holder 1075 mm Table dimensions 475x425 mm Column diameter 92 mm Motor power 1.5 kW 400V power supply Gravity cooling system Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment 1500W two-speed motor Left and right rotations DTR in Polish CE declaration Gravity cooling system Optional equipment feeder

Condition: ready for operation (used), Leistritz 59692 002 Motor SN L3MF 32/83,used, strong traces of use, 100% functional, scope of delivery according to photos Cgsb Hslx N Tzodbn Het

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cgobokuzd He Hdbn Hjt Cutting depth: 200 mm Scorer: yes Height adjustment saw blade: motorized Pivot adjustment saw blade: motorized Width stop adjustment: manual Display saw blade angle: digital Display cutting height: digital Display width stop: scale Display cutting ruler: scale Saw blade diameter: 550mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7,5 kW Motor brake: yes / automatic Suction connection: 100mm and 120mm machine length: 3600mm Machine width: 2000mm Weight: 1000kg

Condition: used, x-travel 600 mm y-travel 500 mm z-travel 450 mm control TNC 415 Heidenhain Main spindle: turning speed range - milling 20 - 5.000 U/min power capacity - milling spindle 6 / 9 kW tool taper SK 40 quill stroke 90 mm transmission ratio 4 swivellable +/-90 ° work table: table-size 900 x 530 mm T-slots 7 T-slot - distance 63 mm T-slot - width 14-H7 mm max. table load 400 kg Tool-Presetter: number of toolpositions 18 pos. tool taper SK 40 max. tool diameter 85 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 10 kg tool changing time max. 15 sec feeds: Ceb Hdsu N Iuysbn Hogt feeds - fine adjustment 2 ~ 4000 mm/min rapid traverse X-axis 6.000 mm/min rapid traverse Y-axis 6.000 mm/min rapid traverse Z-axis 5.000 mm/min total power requirement 15 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 3,4 x 3,6 x 2,2 m Tool Room Milling Machine - Universal MIKRON WF 32C

Condition: used, Max Capacity: 340kg Csb Hjuf Hgqedbn Hegt Max Platform Height: 9.75m Power: Electric

Condition: good (used), Load capacity: 125 kg Cgjbeixl U Tj Hdbn Hot boom length: 3200 mm working length: 2600 mm total height:: 3300 mm

Condition: new, - NEW -manufacturer HolzkraftType VSA 32- Feeder with uniform feed speed withoutloss of strength- Metal gears with hardened gears- Metal cover of the feed rollers- Right and left rotation- Powerful motor- Durable PU-feed rollers- Stand as standard with an extended boom arm- Individually adjustable for horizontal and pan- andvertical use- With counterTechnical specifications:Max. Projection 300 mmNumber of feed rollers 3 pcsRoll diameter 80 mmRoll width 30 mmTravel of the rollers 12 mmSpeed levels 4Velocities 5 / 6.5 / 8/11 m / minEngine performance 0.18 kWConnection 400 V / 50 HzWeight 34 kgItem No. 5111000Located in 97447 Gerolzhofen- Free on truck - Cob Hovwgcujdbn Hsgt

Condition: ready for operation (used), Technical characteristics Maximum load : 125 kg Part size : 3000 x 1500 mm Spreader dimensions : 2400 x 1150 x 555 mm Length of the control handle : 945 mm 6 suction cups diameter 125 mm Power and Motors Cobek Rtm Io Hdbn Hsgt Pluging: Three-phased Overall dimensions

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Cgjbsr Epr Uj Hdbn Hst Make: EHT Type: Variopress 125-3550 Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1999, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain Main spindle: turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 work table: table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg feeds: rapid traverse ( X / Y / Z ) 15 m/min Cgjb Hjugavnodbn Hot feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Year of construction: 2010, Condition: excellent (used), machine/vehicle number: RESHGFW, DEMAG KBK crane canopy crane runway - various cranes with different dimensions in stock - please inquire ! Payload / lifting capacity 125KG - 1000Kg - please ask Technical data of the system: Crane runway made from Demag KBK2/KBK2-L rails with raised trolley - crane girder is between the two runways for maximum lifting height Cgob Hsrwi Slsdbn Hst System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable towing, brackets/hangers etc. incl. chain hoist Crane is dismantled and immediately available Various cranes are available, pictures are for illustration purposes only Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, spindle speed (max.): 7,000 rpm, bar diameter: 32 mm, number of slots in tool magazine: 23, Equipment: chip conveyor, TECHNICAL DETAILS Control: FANUC - F 32i-B Cgob Hdevt Sdvobn Hst Maximum bar diameter: 32 mm Number of axes: 7 Tool changer Number of places in the tool changer: 23 pcs. Number of driven tools: 6 pcs. Spindle speed for driven tools: max. 6,000 rpm Main and counter spindle Maximum spindle speed: 7,000 rpm C-axis resolution: 0.001 ° Speed control: S command + direct 4-digit command Drive: AC spindle drive Drive motor (continuous operation): 5.5 kW Drive motor (30 min/60% ED): 7.5 kW Control axes Rapid feed X, Y, XB, ZB: 24,000 mm/min Rapid feed C: 198,000°/min (550 rpm) Maximum turning feed X, Y, XB, ZB: 10,000 mm/min Maximum turning feed C: 10,000°/min (27.8 rpm) Smallest input unit X, Y, XB: 0.001 mm Smallest input unit Z, ZB: 0.001 mm Smallest input unit C: 0.001° Machining performance Max. machining diameter SR-32J: Ø 32 mm Max. headstock stroke: 80 mm Max. drilling capacity fixed tool: Ø 13 mm Max. drilling capacity driven tool: Ø 8 mm Max. tapping capacity fixed tool: M12 x P1.75 Max. tapping capacity driven tool: M6 x P1.0 Max. milling capacity driven tool: Ø 10 mm Max. slot milling capacity driven tool: 1.5 mm (W) x 4 mm (D) MACHINE DETAILS Dimensions (L x W x H): 3,800 x 1,400 x 2,200 mm Machine weight: 3,100 kg EQUIPMENT - Main and counter spindle - 2 x C-axis - 2x tool turret - Chip conveyor - Bar loading magazine: FMB turbo RS 3-36-3200 - Part ejection - Part conveyor belt

Condition: used, used, good condition Make Pfeiffer Piccolo 125 type Motor 2.95 kW Cutting height approx. 125 mm Blade diameter approx. 450 mm pivotable height adjustable Cob Hdbnjvwf A Te Hsgt Space requirement approx. 600 mm x 700 mm x 1700 mm Weight approx. 500 kg Storage location 97447 Gerolzhofen, free on truck, unpacked Delivery in current condition as seen without guarantee and warranty

Condition: excellent (used), Year of construction: 2012, operating hours: 1,923 h, Functionality: fully functional, machine/vehicle number: 8938, MAREL/GEBA SC 125 MA V ID.NO. 2782 Marel/Geba SC 125 MA V Salmon slicer year mod 2012 with associated washing trolley & various spare parts. Capacity up to 250 discs / min and adjustable angle up to 68 degrees. Cob Houa D Axodbn Hogt Very nice condition! Dimensions 320 x 100 cm Height 150 cm.

Year of construction: 2010, Condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist Cgsb Hdbnepwgr Ho Het including bolts, cable drag, chassis, end cap etc. ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Condition: used, with roller conveyor right and leftused, good conditionmake Pfeiffertype EP 125motor 3.7 kWcutting height approx. 125 mmcutting width approx. 700 mmblade diameter approx. 450 mmroller table length right approx. 3000 mmRoller table length left approx. 2500 mmSpace requirement approx. 600 mm x 600 mm x 1800 mmStorage location 97447 Gerolzhofen, free loaded, unpackedHandover as seen,without guarantee and warranty Cob Hdbovwfpaen Hsgt

Condition: used, used, good conditionmake Pfeiffer-Piccolotype EP125motor 3 kWcutting height approx. 125 mmcutting width approx. 700 mmblade diameter approx. 450 mmroller table length right approx. 2300 mmroller table length left approx. 3500 mmwith stop flapspace requirement approx. 600 mm x 800 mm x 1800 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Cgobsvwfgrs Hdbn Hot