Used Versalift Vtl-140-F Fpc for sale (11,020)

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Cobu Rstxh Niowkasrb

Condition: excellent (used), Year of construction: 2021, operating hours: 1,926 h, variable screw compressor ALMIG F-DRIVE 8 (5 to 13 bar) Cotroller: Aircontrol Premium Year of construction: 2021 Operating hours: 1926 Bh Technical specifications Type: F-Drive 8 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0,16 to 1,32 m³/min at 6 bar (g): 0,20 to 1,27 m³/min at 7 bar (g) : 0,23 to 1,21 m³/min at 8 bar (g) : 0,27 to 1,16 m³/min at 9 bar (g) : 0,27 to 1,11 m³/min at 10 bar (g) : 0,31 to 1,05 m³/min at 11 bar (g) : 0,31 to 0,99 m³/min Crsbu Rwkjuz T N Hsaeb at 12 bar (g) : 0,33 to 0,95 m³/min at 13 bar (g) : 0,38 to 0,89 m³/min Nominal power drive motor: 7,5 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 660 mm Width: 690 mm Height: 1586 mm Weight: 356 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: as good as new (ex-display), Year of construction: 2024, consisting of: ᐳ Stop rail 2 m long ᐳ 2 pieces complete stops ᐳ 1 piece measuring scale right ᐳ left ᐳ 1 piece measuring scale left ᐳ right ᐳ Mounting screws Crjbu Rwefrnpnekaob - The delivery does not include the wooden base strip 50 x 45 mm, onto which the stop rail is screwed.

Condition: used, Column-mounted slewing crane, slewing crane Demag PK5N-F chain hoist with normal and fine hoist, jib 4m long, already dismantled, loaded on pallet. Very good condition Csbu Rscalfkewkajrb

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, For sale ultrasonic welding machine from Zemat. The machine with a single table. Crobuoumhl Sj Rwkasb

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 3,098 h, load capacity: 14,000 kg, lifting height: 4,500 mm, free lift: 2,250 mm, fuel type: electric, mast type: duplex, construction height: 3,765 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Cebuervr Nko Rwkaerb Condition: Reconditioned with warranty Technical condition: Very good Front tires type: Air Front tires size: 12.00 x 20 Rear tires Type: Air Rear tires Size: 12.00 x 20 Battery Volt: 120V Battery Ah: 1085Ah Battery year of construction: 2023 Description: KALMAR Electric forklift ECG 140-6 Year built: 2019 3098 Operating hours Load capacity: 14000 kg / 600 mm Load center !!!!! Lift mast: Duplex-FREIHUB Lift height: 4500 mm Overall height: 3765 mm Free lift: 2250 mm Fork length: 2400 x 200 x 70 mm Tires: Pneumatic 12.00 x 20 Continental ACCESSORIES: Fork positioner Sideshift Kalmar comfort cabin with heating and air conditioning Radio Battery 2 x 120 V / 1085 Ah - NEW !!!! 2 x chargers 2 LED work lights at the front of the lift mast 2 LED work lights at the front of the roof 2 LED work lights at the rear of the roof STVO lighting Reversing camera Rear view mirror Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, STVZO, full cab, air conditioning, CE certificate, twin tires, interior mirror, exterior mirror, windshield wiper, seat heating, LED,

Condition: ready for operation (used), Functionality: fully functional, Chipper for wood, lumber shavings LINDNER type T 400/140-2 - after technical inspection - very good condition - for technological chips Cobu Rwkjr Ak Rgoaorb TECHNICAL PARAMETERS: inlet width 400 mm inlet height 140 mm rotor diameter 450 mm rotor length 400 mm power of main motor 33 kW power of motors from feed 2 x 1,5 kW number of knives 2 pieces sieve size 60 mm x 90 mm feed shafts in very good condition power of feeder motor 1,5 kW length of feeder 4200 mm transport dimensions (length / width / height) 430 / 240 / 150 cm weight approx. 2000 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, Immediately available: new variable screw compressor ALMIG F-DRIVE 22 (5 to 13 bar) Cotroller: Aircontrol Premium Year of construction: 2024 Operating hours: 2 Bh Technical specifications Crebotpw I Hou Rwkasb Type: F-Drive 22 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.44 / 4.14 m³ / min at 6 bar (g): 0.43 / 4.12 m³ / min at 7 bar (g): 0.42 / 4.11 m³ / min at 8 bar (g): 0.50 / 3.89 m³ / min at 9 bar (g): 0.58 / 3.66 m³ / min at 10 bar (g): 0.67 / 3.47 m³ / min at 11 bar (g): 0.75 / 3.26 m³ / min at 12 bar (g): 0.85 / 3.02 m³ / min at 13 bar (g): 0.94 / 2.79 m³ / min Nominal power drive motor: 22 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Sound pressure level (DIN 45635 part 13): 70 dB(A) Compressed air connection: 1“ G Length: 790 mm Width: 800 mm Height: 1757 mm Weight: 356 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2021, Condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum angled conveyor belt including substructure horizontal area 2000mm (adjustable) Rising range 4500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Crebu Rwkshh Ay Ssaeb Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: good (used), Demag chain hoist Design PK2N-F, PK2N Lifting capacity 250(1-leg) or 500kg(2-leg), Cjbecalf Asu Rwkajrb Example photo, different versions available, ready to use condition.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,395 h, Functionality: fully functional, machine/vehicle number: 1400040877,  4-axis (X, Y, Z, A) center,  For economical and efficient machining of aluminum profiles and thin-walled steel profiles, Cebu Rsuc U S Newkajrb  Version with air-cooled milling spindle,  All machining processes such as milling, drilling and threading take place on a stationary profile,  Smooth machining using all tools,  Simultaneous tool magazine ensures short tool change times and, as a result, optimal machining cycles,  Magazine can be equipped with eight tools,  Windows operating system  Machine equipped with eluCam program  Max. length of machining fields with front machining: 4200 mm  Max. length of machining fields without front machining: 4320 mm  Automatic length measurement on both sides,  Barcode reader,  Stationary tool magazine (8 slots),

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, overall weight: 1,000 kg, fuel type: electric, FIDA Molino F 090 7.5 kW chipper, waste shredder Specification: * condition - used * manufacturer - FIDA * main motor 7.5 kW * hydraulic pressing drawer * pneumatically opened flap * replaceable tines, 4-sided * mesh with mesh fi 14 mm * extraction stub - fi 200 mm Crjbuorhwc Ue Rwkaob * year of production - 1998 * weight - 1000 kg * overall dimensions - 265 x 100 x 200 cm ( W x L x H ). Additional information: * very good, factory technical and visual condition. * the photos presented illustrate the actual condition of the object of sale * possibility to turn on and check the device on site. * the price listed in the auction does not include VAT.

Condition: excellent (used), Year of construction: 2019, Year of production: 2019 Voltage: 400 V / 50 Hz Motor power: 2 x 4 kW Air volume: 15.000 m3/h Filter area: 160 m2/4 Max. pressure: 2800 Pa Size (L x w x H): 2060 x 1515 x 3310 Weight: 1200 kg Cebu Rwkjvq Ncwjajrb

Year of construction: 2020, operating hours: 9,045 h, Condition: excellent (used), machine/vehicle number: MA0157_S0058169, variable screw compressor ALMIG F-DRIVE 11 (5 to 13 bar) Cotroller: Aircontrol Premium Year of construction: 2022 Operating hours: 9045 Bh Technical specifications Type: F-Drive 11 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.16 / 1.95 m³ / min at 6 bar (g): 0.20 / 1.94 m³ / min at 7 bar (g): 0.23 / 1.84 m³ / min at 8 bar (g): 0.25 / 1.75 m³ / min at 9 bar (g): 0.26 / 1.67 m³ / min at 10 bar (g): 0.29 / 1.57 m³ / min at 11 bar (g): 0.30 / 1.48 m³ / min at 12 bar (g): 0.32 / 1.38 m³ / min at 13 bar (g): 0.37 / 1.27 m³ / min Nominal power drive motor: 11 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Sound pressure level (DIN 45635 part 13): 70 dB(A) Compressed air connection: 3/4“ G Crebu Rsihf Epjwkajb Length: 660 mm Width: 690 mm Height: 1586 mm Weight: 356 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Year of construction: 1974, Functionality: limited functionality, Rotary Table 2500X3500 mm, Floor plate 4500X13500 mm; Overall size L=20000 mm, l=15000 mm, H=9000 mm; Strokes: X = 12000 mm, Y = 3500 mm, Z =1000 mm Crebu Rovb E Scewkaob

Condition: new, Year of construction: 2024, EvoDrive control Swivels +/- 46° on both sides - Electromotive height and tilt adjustment -46 to +46° for the main saw blade with main saw blade with automatic correction of the cutting height when Swivel of the saw unit - Control at eye level, swiveling - Double roller carriage, carriage length 3,200 mm On/off switch at the end of the sliding carriage - CNC parallel fence 1300 mm cutting width - DIGIT L digital angle mitre fence with length compensation, manually adjustable with 2 stop flaps - Saw blade projection 204 mm, max. saw blade diameter 550 mm - Drive power 6.5 kW (VARIO, infinitely variable speed) - AKE tool clamping system for the main saw blade Preparation for retrofitting a scoring unit - Machine height 91 cm Table top extension 840 mm Front support roller Csbu Rjhuph Djwkasrb Template holder DUPLEX mitre fence

Condition: excellent (used), Year of construction: 2013, operating hours: 7,810 h, Functionality: fully functional, machine/vehicle number: 1400040686, travel distance X-axis: 7,600 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, total height: 2,950 mm, total length: 11,340 mm, total width: 3,430 mm, overall weight: 4,900 kg, spindle speed (max.): 24,000 rpm, operating hours of spindle: 7,810 h, number of spindles: 1, Equipment: cooling unit,  4-axis (X, Y, Z, A) center,  For economical and efficient machining of aluminum profiles and thin-walled steel profiles,  Version with liquid-cooled milling spindle,  All machining processes such as milling, drilling and threading take place on a stationary profile,  Smooth machining using all tools,  Co-rotating tool magazine ensures short tool change times and, as a result, optimal machining cycles,  The magazine can be equipped with eight tools,  Two separate machining zones allow machining in shuttle mode (option),  Windows operating system,  Machine equipped with eluCam program,  Max. length of machining fields with front machining: 7600 mm,  Max. length of machining fields without front machining: 7720 mm,  Machining on two stations in shuttle mode,  Automatic length measurement on both sides,  Possibility of clamping two profiles,  Barcode reader,  Stationary tool magazine (8 sockets),  Concurrent tool magazines for the angle head Crebuouc U Rfj Rwkaeb  eluCad office software package for optimized production management

Condition: good (used), Year of construction: 2015, operating hours: 14,843 h, Functionality: fully functional, machine/vehicle number: 816815404, TECHNICAL DETAILS X-axis travel: 8,000 mm Y-axis travel: 2,000 mm Worktable length: 8,000 mm Width of the worktable: 2,000 mm Laser source: YLS-8000-CUT Laser power: 6 kW Laser type: Solid-state laser Laser gain medium: Ytterbium laser Wavelength range: 1070 ± 5 nm Operating mode: CW / modulated Modulation frequency: 0 - 5 kHz Cjbu Rott Shgowkajrb Power tunability: 10 - 100 % Control: SIEMENS Sinumerik 840D controller Programming software: Lantek or Metalix Guide: SIEMENS linear guides Cutting head: PRECITEC MACHINE DETAILS Total length: 22,000 mm Total height: 2,515 mm Total width: 4,040 mm Total weight: 33,500 kg Switch-on time: 32619 h Laser time: 14843 h Operating voltage: 400 V, 50 Hz Rated current: 113 A Laser voltage: 400 - 480 V, 50 - 60 Hz

Condition: new, Year of construction: 2024, Functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, power: 5 kW (6.80 HP), sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage - Front support roller Csbu Rwkjuh R R Ejaerb

Condition: excellent (used), Year of construction: 2014, load capacity: 270 kg, arm reach: 2,700 mm, net weight: 1,129 kg, The most popular robot series from KUKA, the KR QUANTEC, is sturdy, sleek, versatile, and outfitted with high performance features. The KUKA KR 270 R2700 F Ultra robot has a repeatability of 0.06 mm.  Crsbu Rwkeq Dznbjaeb Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR270 R2700 F Ultra (Foundry) Condition: Used & Tested Year: 2014 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: The Base and gripper As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: excellent (used), Year of construction: 1974, Functionality: fully functional, FOREST CN F 160 FLOOR TYPE HORIZONTAL BORING AND MILLING MACHINE Csbu Rwouihdlskasrb Rotary Table 2500X3500 mm, Floor plate 4500X13500 mm; Overall size L=20000 mm, l=15000 mm, H=9000 mm; Strokes: X = 12000 mm, Y = 3500 mm, Z =1000 mm

Condition: new, Year of construction: 2019, Produced diameters: 40-140 Engine 5kW End-of-shift product 30m3 per shift Cjbu Rod Rh Dxjwkajrb

Condition: excellent (used), mileage: 43,000 km, power: 102.97 kW (140.00 HP), fuel type: diesel, first registration: 10/2019, emission class: euro6, color: white, Equipment: ABS, air conditioning, airbag, central locking, onboard computer, ROSSINI SERVICE S.R.L. authorized IVECO workshop and multi-brand dealer of used commercial and industrial vehicles. PROPOSES: BEAUTIFUL FIAT DUCATO FIXED BOX REAL KM, CERTIFIED AND SHOWN ON THE SALES INVOICE. FOR INFORMATION: 3441197960 - 030933077 Franco / Nicola view our website rossiniservice, VARIOUS MODELS ON SITE. Included accessories: ABS, Airbag, Power windows, Boardcomputer, CD player, MP3, Power steering, Climate control, Armrest, Cruise control, Electric defrosting mirrors. Csbu Rwot Iu Agekajrb Possibility of personalized financing Possibility of 12 MONTH WARRANTY. PRICE TO BE CONSIDERED EXCLUSIVE OF VAT COMPLETE CUTTING BEFORE DELIVERY performed by our specialized IVECO technicians. Rossini Service delivers the vehicle directly to your location with advance request for quote. Established in 1960 as a FIAT / OM workshop, Rossini Service has been an ISO-certified IVECO authorized workshop since 1992. Our qualified and specialized staff has decades of experience in repairing and tuning cars and industrial vehicles of any manufacturer. Every Rossini Service vehicle is carefully checked and tuned up before delivery

Condition: used, travel distance X-axis: 7,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 1,200 rpm, feed rate X-axis: 900 m/min, Ø quill: mm. 140 Spindle taper : ISO 50 travel X : mm. 7000 travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Cobjt Rkcuju Rwkasrb Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: °.pos. Table long.travel (AxisV): mm. 1500 Spindle speed : RPM. 1200 Spindle motor: Kw. 70 CNC ECS 2101 N°2 milling square heads N.2 Floor plate 6000x2000

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 8,002 h, load capacity: 1,400 kg, lifting height: 9,000 mm, free lift: 3,000 mm, fuel type: electric, mast type: triplex, construction height: 3,554 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Load center: 600 Cebuoviz Hro Rwkajrb Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Polyurethane Rear tires type: Polyurethane Battery Volt: 48V Battery Ah: 620Ah Description:: Sideshift, 3rd valve, front working lights, full free lift, CE certificate,