Used Trime Light Tower Full Battery for sale (27,380)

Condition: used, Year of construction: 2011, Tenoning spindle 1 Stk Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2784 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please inquire about additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Adjustment range: radially pneumatically controlled to 8 positions, e.g., for edge rounding from above > Laser alignment light for detecting the sawn section Item 2: Rounding unit, horizontal, bottom ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm mm > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm > Axial adjustment range mechanically coupled to cross-cut saw > Radial adjustment range pneumatically controlled on/off Length stop NC-controlled ----- > Length 3,500 mm > Electronic length stop Item 3: Tenon and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 3,500 rpm > Maximum tool travel: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Cylinder and Counter-rotation) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (concurrent spindle area), Rung support bar from above in the area of ??the profile milling unit vertically on the right, and profiling spindle. Item 6: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed: 9,000 rpm > Max. tool travel: 130 mm > Axial adjustment range: 30 mm, 8 positions > Radial adjustment range: 125 mm, 8 positions Item 7: 3rd profiling spindle (fitting spindle) Dslq Hhwswamqvewekl ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions > Radial adjustment range: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool travel: 210 mm > Motor power: 3.8 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.8 kW > Tool clamping length: 125 mm > Axial adjustment ra...

Year of construction: 2005, Condition: excellent (used), USED KARCHER BR/BD 55/40 C SCRUBBER WE HAVE 2 VARIANTS - ROLLER HEAD BR - DISC HEAD BD TECHNICAL DATA: Brush working width (mm) 550 Working width of the squeegee (mm) 850 Theoretical capacity (m2) 2200 Tank capacity (l) 40 Weight (kg) 120 Power supply voltage 24 V Dimensions (L x W x H) 1285 mm x 695 mm x 1115 mm INCLUDES: - Roller brushes / Disc brushes - Collection bar - Battery charger - ATTENTION: THE KIT DOES NOT INCLUDE BATTERY Elements to be purchased according to individual customer order Dkjlq Hhsgd Tpmjwwol LARGEST SELECTION IN POLAND !!! WE PROVIDE WARRANTY! DELIVERY UP TO 100 KM FREE OF CHARGE ! We offer: - a large selection of washers of this model, in technical condition as well as visually very good - we provide warranty on purchased equipment - we have warranty and post-warranty service - possibility of transport - possibility of shipping the washer by courier Why is it worth to buy the device in BUBU-KAR? Buying machines in our company you are sure that the equipment is in working order, because all machines are serviced by our specialized technical department. You do not have to worry about spare parts, because we have a wide range of spare parts on sale, more than 4 thousand items. Our advantages: - large selection - professionalism - flexibility - knowledge and experience

Condition: used, Year of construction: 2007, operating hours: 11,763 h, Field of application: Construction Serial number: 7xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20177 Specifications: - 2007 model - New engine 2563 hours - Replaced engine at 9200 hours - Total hours on the plant: 11,763 hours - New engine (factory new with starter) - Inner casings 95% remaining - Outer casings 95% remaining - Overhauled generator - Replaced clutch - 2 side belts included (see pictures) - 3 screen covers (nordberg B380) - Services performed by Metso and owner - Magnet - Magnetic belts included if desired (almost never used) - Has cloths in different sizes that can be included for an additional price - Lights Description: We have a 2007 Metso Lokotrack LT1100 Fine crusher w/ side belts for sale. It is a new engine that has only run 2563 hours. It was replaced at 9200 hours. In total, the machine has run 11,763 hours. Magnetic tape is included if desired. Tablecloths in different sizes can be included for an additional price. It can also be included with a Feeder with tape for an additional price. Services have been performed by Metso and the owner himself and have been taken continuously. This machine has had 1 permanent driver throughout. The machine functions as it should according to the owner. Djlqowdvk Hj Hhwwskl Hours: 11763

Condition: good (used), Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Delqjq Ec Ebe Hhwwjkl Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

Condition: used, No. 04400 Roller conveyor trolley / loading station Ruchser RU-RWSF / RU-VL Used Consisting of 2 units: - Roller conveyor trolley Ruchser RU-RWSF 30/7 With wide roller conveyor approx. 500 mm Height from roller conveyor approx. 1600 mm, length approx. 3000 mm Can be moved on rails (rails not included in scope of delivery) Transport dimensions approx. 3000 x 850 x 1900 mm, weight approx. 200 kg - Loading station Ruchser RU-VL 1600 For loading order picking trolleys Can be moved on rails (rails not included in scope of delivery) The loading device moves under the order picking trolley and pneumatically lifts the window so that it protrudes slightly and can be rolled away Transport dimensions approx. 1650 x 1200 x 400, weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Dkjlq Hhwsvdwa Rewjl Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Functionality: fully functional, Year of construction: 2005, operating hours: 3,355 h, load capacity: 1,500 kg, lifting height: 6,800 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,950 mm, fork length: 1,150 mm, drive type: Elektro, Electric 3-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical Condition: Very good Front Tire Type: Super Elastic Front Tire Size: 18x7-8 Rear Tire Type: Super Elastic Delq Hhwjwgr U Tjwjkl Rear Tire Size: 15x4/5-8 Battery Voltage: 48V Battery Ah: 625Ah Battery Manufacturer: HSR Battery Type: PzS Battery Year of Manufacture: 2019 Description: In addition to this model, we also offer other forklifts and warehouse equipment. Our models are workshop and FEM4.004 tested. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used vehicle, even if you don't purchase it from us. Hire purchase and financing at favorable terms are available upon request. We would be happy to provide you with expert and detailed advice on our vehicles. ...

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion Dkolq Hhwsvnv Uuswjl 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: used, Functionality: fully functional, machine/vehicle number: 90127645, Year of construction: 2004, operating hours: 8,610 h, load capacity: 1,400 kg, lifting height: 3,000 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 1,900 mm, fork length: 1,200 mm, drive type: Elektro, High lift truck Chassis number: 90127645 Mast type: Duplex Technical condition: good Battery Volt: 24V Battery Ah: 375Ah Battery Year of construction: 2004 Djlqjuhwzke Hhwwokl Description: Jungheinrich EJE 14 No.: R0008 Year of construction: 2004 Operating hours: 8.610 The device is optically and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other trucks on site.

Condition: used, mileage: 403,762 km, Year of construction: 2014, Serial number: YS2R6X4000210xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20020 Dkelq Hswdu Ikehwwjl Specifications: - 2014 model - EU approved until: 10.11.25 - 581 hp - 403.762 km - Automatic transmission - 6x4 - Euro 6 engine - Front suspension: steel - Rear suspension: steel - Tires (see pictures) - Ploughing rig - Ploughing plate - New batteries - Relief - Air conditioning/ac - Extra lights on the roof - Webasto - Heated mirrors - Ready for delivery Description: We have a 2014 model Scania R580 6x4 tipper truck for sale. The car has previously been on a silver agreement, but the owner has taken care of the service and maintenance himself since then. The battery on the car has recently been changed, and everything works as it should according to the owner. The car is ready for delivery and ready for immediate takeover. Km: 403762 HK: 581 Technical approved: Yes EU-approved until: 10.11.2025 Own weight: 14400 Total Weight: 30000 Payload: 15525 Width: 255 Length: 762 Euro: 6 Gearbox: Automatic

Condition: good (used), Code: 0017 Brand: ITALPRESSE Dolq Hhwjvvmwiowskl Model: SCF/8-S Hydraulic press for hot/cold cycle for wood materials, composite materials, plastics and various materials Technical data: Platen size mm 3000 x 1500 N° 6 Drilled solid steel platens thickness mm 38/40 - Coated in aluminum N° 5 Daylight openings N° 4 intermediate platens Cylinder stroke mm 450 Press space mm 90 Platen movement from bottom to top Max working temperature 120° Platen heating by water or steam Total thrust ton 120 Specific pressure on 80% of the surface area kg/sq cm 3,3 N° 8 thrust pistons diameter mm 70 Hydraulic unit power Hp 4 Timer for timed opening Overall dimensions mm 4200 x 1800 x 2900 h Weight kg 13000 approx

Condition: used, mileage: 784,911 km, power: 338 kW (459.55 HP), first registration: 04/2018, overall weight: 18,000 kg, axle configuration: 2 axles, empty load weight: 8,116 kg, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, front tire size: 385/55 22,5, rear tire size: 315/70R22,5, number of seats: 2, maximum speed: 90 km/h, number of beds: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, immobilizer system, onboard computer, parking heater, sleeping cabin, spoiler, truck registration, | MAN TGX 18.460 XXL | Automatic, retarder | Electric windows, | Differential lock, sunroof | Heated seats, air conditioning, auxiliary heating, lane departure warning | Adaptive cruise control, Brake Matic, emergency brake assist, | Cruise control, fog lights | Radio/CD, Bluetooth, 2 aluminum tanks | Refrigerator, 2 beds | Tires FA: 385/55 22.5 HA: 315/70R22.5 | Errors, input and advance sales excepted. Delq Hjwh Tr Nshwwekl

Condition: used, Functionality: fully functional, Year of construction: 2020, operating hours: 8,563 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, fork carriage width: 1,860 mm, fork length: 1,500 mm, total length: 4,574 mm, engine type: Perkins 4 Zyl., drive type: Diesel, construction width: 1,860 mm, net weight: 8,490 kg, Rough Terrain Forklift Load Center: 600 Fork Width: 150 mm Fork Thickness: 60 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast Type: Duplex Transmission: Hydrostatic Drive Condition: Ready for use and fully functional Technical Condition: Very good Front Tires Type: Pneumatic Dkslswgr U Heq Hhwwol Front Tires Size: 495x45x22-5 Rear Tires Type: Pneumatic Rear Tires Size: 225x75-10 Description: In addition to this forklift, we also offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you don't purchase a vehicle from us. Hire purchase and financing with favorable terms are available upon request. We're happy to provide you with expert and detailed advice on our vehicles. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, air conditioning, full free lift, CE certificate, interior mirror, exterior mirror, joystick, windshield wipers, single pedal, seat,

Condition: used, engine output 5 kW saw-blade dia. 300-350 mm Working speed 0-40 m/min weight ca. 1550 kg kg Concept 350 PLUS "Partnership Edition" pressure beam saw Cutting length: 3.200 mm ----- combines the advantages of different sawing systems. Flexible as one Panel saw, precise and safe like a pressure beam saw and ergonomic like a rip saw ----- Manufacturer description: - Saw unit can be swiveled up to 46° - Pressure bar, including LED lighting with 3 different action colors: WHITE: Machines in rest position RED: Pressure bar lowers or emergency stop function BLUE: Sawing unit moves - variably usable support table 1,000 x 500 mm - Scoring system using the main saw blade in synchronization - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, including: Saw blade stand, template holder, emergency stop button, start button, selector switch Groove/score saws/saws, rotary switch feed speed, switch for Laser (option) and USB socket Partnership Edition including: - Motorized width stop with 4 aluminum stops, which move synchronously. All 4 stops move up to 1,300 mm. The table is approx. 2,000 mm long. - Screen control (8'' touchscreen). The graphical interface offers the following functions: Tool database, angle cut calculation at the length stop, Cutting plans can be created and saved, programs can be saved USB can be saved, exported and imported. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade projection 350mm saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 - 350 mm, bore 30 mm - Rotation of saw blade: 4,000 rpm. - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min. - Total length: approx. 3,670 / 4,270 / 4,870 mm (depending on cutting length) - Weight: from approx. 1,150 to 1,550 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Suction nozzle: 1 x 100 mm, 1 x 120 mm Model variants: - CONCEPT 350 PLUS with 2,600 mm cutting length - CONCEPT 350 PLUS with 3,200 mm cutting length - CONCEPT 350 PLUS with 3,800 mm cutting length - CONCEPT 350 PLUS with 4,000 mm cutting length and bigger on request! ----- Price of the above-mentioned machine with equipment variant on request! ----- General options with extra charge: - 3410451 cutting line laser - saw motor with 7.5 kW (10 HP) including automatic star-delta Start-up - 41/03 programmable saw blade height adjustment - 3380132 Miter stop +/- 50° swiveling with length compensation, incl. Telescopic stop with folding stop - 3380135 Miter stop +/- 50° swiveling with length compensation, incl. 2 Digital displays: 1 digital display for folding stop, 1 digital display for the stop on the telescopic extension -3380136 Miter stop swivels +/- 50° with length compensation, including 3 Digital displays: 1 digital display for folding stop, 1 digital display for the stop on the telescopic extension, 1 digital display for the miter indicator - 3380138 additional support table 800 x 200 mm, can be attached - 3515013 Auxiliary stop for long, narrow workpieces, adjustable via scale (Support table 3380138 required) - 3515014 Auxiliary stop for long, narrow workpieces, adjust... Djlq Hjtg Aihjhwwjkl

Condition: used, mileage: 172,720 km, Year of construction: 2008, Field of application: Freight transport Serial number: MPATFS85H8H518960 Please contact ATS Norway AS for more information Please provide reference number upon request: 20136 Specifications: - 2008 model - Eu-approved until: 14.09.25 - Mileage: 172,720 - Automatic - 163 hp - 4x4 - Low/high gear - Not ADR-approved - Black/White tires included - Air conditioning/ac - Lights - Radio/dab - Heated mirrors - Ready for delivery Description: We have a 2008 Isuzu D-max 3.0 TD 4x4 pickup for sale. The car is Eu-approved until 14.09.25 Cosmetic damage and scratches on the paint are present. The car comes with winter/summer tires. Ready for delivery Km: 172720 HK: 163 Technical approved: Yes EU-approved until: 14.09.2025 Delqjwdu Hmj Hhwwskl Own weight: 1850 Total Weight: 2950 Payload: 1025 Width: 180 Length: 516 Gearbox: Automatic

Condition: good (used), Code: 0066 Brand: EMME ELLE Model: TO 3200 - Norme CE One-blade hydraulic veneer cutting machine - CE Standard Technical data Very sturdy structure Cut length mm 3220 Cut height mm 100 Cutting display light Feed gauge with programmer to set cutting measurements - Motor Hp 0,75 Hydraulic control unit controls the movement of the cylinders to move the pressure and blade and guarantees maximum cutting speed and power - Motor Hp 7,5 Max cut depth mm 750 Min cut depth mm 20 Safety photocell barriers End cutting side control panel Delq Hov Rgd Eohwwokl Overall dimensions mm 4200 x 1900 x 1850 h Weight kg 4300

Condition: used, mileage: 335,221 km, power: 375 kW (509.86 HP), first registration: 08/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, empty load weight: 7,978 kg, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: steel-air, front tire size: 315/70R22,5, rear tire size: 315/70R22,5, Equipment: ABS, air conditioning, cabin, central locking, compressed air brake, cruise control, differential lock, navigation system, onboard computer, parking heater, sleeping cabin, soot filter, truck registration, | MAN TGX 18.510 4X2 | Adaptive cruise control, lane departure warning, | Euro 6, digital instrument panel, | GX cab, | LED daytime running lights, | refrigerator, sunroof | automatic transmission, differential lock, | multifunction steering wheel, cruise control | air conditioning, heated seats, auxiliary heating | Adaptive cruise control, distance warning, emergency brake assist, | lane departure warning, | electric windows, electric mirrors | on-board computer, navigation system | input errors, mistakes and advance sales subject to change Dkolq Hhwewh Tr Ajwsl

Condition: new, Functionality: fully functional, Year of construction: 2023, load capacity: 1,200 kg, lifting height: 3,600 mm, mast type: telescopic, construction height: 2,458 mm, fork length: 1,150 mm, total length: 1,698 mm, drive type: Lithium-Ionen, construction width: 800 mm, net weight: 639 kg, Pedestrian stacker Load center of gravity: 600 Fork width: 170 mm Fork thickness: 60 mm Mast type: Telescopic Gearbox: Electromechanical Condition: New machine Technical condition: New Front tires type: Vulkollan Rear tires type: Vulkollan Battery Volt: 24V Battery Ah: 60Ah Battery manufacturer: Manitou Dolq Hhweu D S I Tjwjkl Battery type: Lithium-Ion Battery year of manufacture: 2023 Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Pulse control, CE certificate, lithium-ion technology,

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and Dkolqjd Ih H Ne Hhwwol equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Dkolq Hjv Igtbohwwol Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: used, Functionality: fully functional, Year of construction: 2000, operating hours: 6,904 h, load capacity: 2,000 kg, lifting height: 5,380 mm, free lift: 1,915 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical Condition: Very good Front Tire Type: Super Elastic Front Tire Size: 23x9-10 Dkjlq Hhwowgr Uyjwjl Rear Tire Type: Super Elastic Rear Tire Size: 18x7-8 Battery Voltage: 80V Battery Ah: 620Ah Battery Manufacturer: Midac Battery Type: PzS Description: In addition to this forklift, we also offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you don't purchase a vehicle from us. Hire purchase and financing at favorable terms are available upon request. We would be happy to provide you with expert and detailed advice on our vehicles. ...

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2781 Weinig Unicontrol 6 Online ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser aiming light for detecting the saw section Length stop CNC controlled ----- > Length 3500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenon and slot spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 3000 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right Dkslq Hhwev E R Ikewel > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 axially clocked feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g. glass-parted rungs) Rung guide consisting of: Rung support bar from above in the area of ??the profile milling unit vertically right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 4 positions, manual Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 110 mm, 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.8 kW Other features ----- > online-capable > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-free rebating > Milling carriage for milling sashes with frame widths of less than 500 mm. Automatic pneumatic clamping. Minimum frame height 450 mm > Double parts package > Return conveyor for 1-man operation: swivel belt > Screen control > Studio window device > Electronic angle display for studio windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: -----...

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Dkolq Hhopbvqvjwwol Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Weinig PowerCom Weinig Powermat 500 for window production Machine is reconditioned and functionally checked ----- Short summary: ----- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: ----- Tool arrangement No. 018 for window production Technical specifications: ----- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120 mm (at tool cutting circle 93 - 125 mm) 1. Tool holder ----- First lower tool holder Motor with brake 7.5 KW Diameter: 40mm Speed 8,000 rpm including high-performance ball bearings Tool flight circle 125 - 180 mm In connection with PowerLock 93 - 180 mm Axial adjustment range 17 mm Hardened table insert in front of the 1st lower tool holder 2. POWERLOCK/HSK tool holder ----- First right tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Adjustment path radial Min. tool diameter at stop level 93 mm Max. tool diameter behind stop level 200 mm Axially and radially CNC controlled 3. POWERLOCK/HSK tool holder ----- First left tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Pressure shoe in front of the left tool holder, including 2 lateral pressure rollers, spring-loaded Axially and radially CNC controlled 4. POWERLOCK/HSK tool holder ----- First upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 5. POWERLOCK/HSK tool holder ----- Second upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Dslq Hhevf Raajwwokl Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 6. POWERLOCK/HSK tool holder ----- Second lower tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Adjustment path axial 40 mm Adjustment path radial Min. tool diameter to table level 93 mm Max. tool diameter 6 mm under table level 22...

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm Dslovu Hdyoq Hhwwskl > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: used, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (length / width) 3065x1600x1900 mm weight of the machine ca. 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine ----- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm Delsvnv Twjq Hhwwjkl - Linear guidance of all grinding units via linear ball bearing sets hardened waves - Time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By immersing it is possible To be able to deliver aggregates deeper into the profiles. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter to adjust the Grinding intensity using frequency converters (separately for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fasteners for grinding discs (wood pulp) - Feed via three lower and one upper conveyor belt and spring-loaded Pressure rollers with continuous speed 5-15m/min - Parameters that can be set using the touch panel are workpiece thickness and workpiece width (left side units individually), immersion depth of side units, Spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and profile shape (Workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic clamping of the workpiece as well as retraction after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm - Workpiece height 12-120mm - Suction connection 5 x 100mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (housing) x width x height (mm): 3065x 1500 x 1600, complete length: 3800mm (including inlet roller conveyor with stop for Leistomat SD) - Weight: approx. 1500 kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Included options: Adjust the machine as follows: - max. workpiece thickness: 160mm - max. workpiece width: 260mm (in the transshipment process, workpieces must be 2x be allowed through) Transport belt width remains at 200mm - Side units with grinding height 120mm instead of 100mm - more powerful engines for side units 0.75kw instead of 0.37 - larger frequency converters for the side units Quick release disc spindle side for quick tool changes for DiscMaster 4TD or CrossMaster 2TD (only for clockwise rotation) Quick release disc tool for Softdisc, Combidisc or Mediumdisc Ø 250mm (only for clockwise rotation) -----...