Used Schaffer 5370 Z for sale (11,253)

Condition: excellent (used), Year of construction: 2005, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 1035 / 560 / 510 mm Fgehxowid A Io Dxmmjb Spindle speed 8000 min-1 Tool magazine for 20 tools SK 40 Chip conveyor

Condition: used, Year of construction: 2007, x-travel 1020 mm y-travel 560 mm z-travel 600 mm Control Siemens - Shopmill table-size 1.100 x 560 mm max. table load 1.000 kg tool taper BT 40 spindle tunring speed 10.000 U/min spindle drive 11 kW number of tool places 24 Pos. Feed ( x / y / z) 36/36/24 m/min weight 6300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - Internal Coolant (ICC) - Shopmill Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Fgjhxowhf Ngj Dxmmjb subject to prior sale!

Condition: used, Year of construction: 2001, x-travel 800 mm y-travel 400 mm z-travel 400 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 2 x 2 x 3,5 m Werth Video Check IP 800 3D CNC measuring machine, built in 2001, retrofitted Fgohx Dxmswhzq Tomjb in 2016 No longer in operation for several years due to discontinuation of the parts. Software version: WinWerth 8.34

Condition: used, Year of construction: 2021, Working dimension X: 4.140 mm Working dimension Y: 1.570 mm Working dimension Z: 275 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 13 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Linear tool changer: Yes Tellerwechsler 13-fach: Yes Vertical drilling spindles: 17 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, in Y-direction BIESSE Drilling aggregate BH 29 2L: Yes Gantry machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Three stop ranges: Yes Electronic supervision of the end-position of the stops: Yes Workpiece support aids: Yes Number of consoles: 8 Pneumatic pipe connectors: an den Konsolen BIESSE Preparation for Uniclamp: Yes Positioning aid: Yes BIESSE SA machine table: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Barcode reader: Yes Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Automatic lubrication: Yes Fehx Dxmewbanksmsgb Remote control: Yes Package for abrasive materials: Yes Control: BIESSE BH 660, BIESSE bTouch Software: BIESSE B_SOLID, BIESSE BSOLID 5-ACHS-MODUL, BIESSE SOPHIA, BIESSE BSOLID DATENIMPORT Conformity marking: CE mark

Condition: excellent (used), Year of construction: 2011, CNC Lathe NEF 400 2011 With driven tools Technical specifications: Turning diameter 350 mm Turning length 650 mm Swing diameter over bed 385 mm Swing diameter over cross slide 350 mm Distance spindle nose to tailstock 902.5 mm Coc Eg S Rrsv Umldegerb Main spindle: Speed range - main spindle 0 - 4,000 rpm Drive power - main spindle 15.3 / 11.5 kW Max. torque 430 Nm Spindle diameter in front Bearing 100 mm Spindle bore 87 mm Max. bar diameter 52 mm Usable bar diameter 52 (45) mm Max. chuck diameter 250 mm Chuck diameter 165 mm Spindle head 170 h5 C-axis 0.04 ° Tool turret: Number of tool positions: 12 positions Shaft diameter DIN 69880: 30 mm Driven tool stations: Number of driven tool stations: 6 positions Speed range - driven tool stations max. 4,500 rpm Drive power of driven tool stations: 5.5 kW Travels: X-axis 255 mm Z-axis 800 mm Fgohx Djwhxkdsxmmjb Tailstock: Tailstock travel 680 mm Tailstock mount MT 4 Clamping pressure 6.8 kN

Year of construction: 2007, Condition: used, Max. machining length: 2,600 mm Y-axis travel: 315 mm Z-axis travel: 230 mm Milling spindle speed infinitely adjustable between 2,800 and 12,000 rpm Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping Fgehx Delp Uz Asxmmjb X and Y-axis CNC controlled, Z-axis continuously lowerable by motor 4 pneumatic material clamps Manual tool change Minimum quantity spray device USB port operation manual Accessories as per photo

Condition: used, Year of construction: 2001, spindle speed (max.): 8,000 rpm, travel distance X-axis: 130 mm, bar passage: 32 mm, bar diameter: 32 mm, overall weight: 2,000 kg, controller manufacturer: MITSUBISHI, controller model: MELDAS 635LC, CONTROLS .. CNC controls MITSUBISHI MELDAS 635LC BASIC FUNCTIONS .. number of turrets: 1 .. live positions: yes WORKING RANGE TURNING .. bar diameter (max): 32 mm MAIN SPINDLE .. spindle revolutions (max): 8000 /min X/Z SLIDE .. X-axis travel: 130 mm .. tool fixture: Turret .. number of tool positions (total): 12 .. - rotation speeds (max): 4000 /min TOOL MAGAZINE .. number of positions: 12 Fshxeu Nkc To Dxmmegb ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 2000 kg ATTACHMENTS (TURNING) .. bar feeder: yes .. bar magazine: yes .. chip conveyor: yes .. coolant unit: yes .. European CE standards: yes Operating hours approx.: 37,242 hours Spindle hours approx.: 14,412 hours LNS Super Hydrobar HS bar loader Incl. tool holder, F42 collets

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Fgehx Dxev Ehawemmob Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Year of construction: 2017, operating hours: 5,010 h, Condition: used, machine/vehicle number: HM1-1304, Turning diameter: 330 mm, turning length max.: 600 mm, travel (X/Z): 165+35/600 mm, B-axis, bar capacity: 52 mm, speed: max. 6,000 rpm, control FANUC Series 0i-TF, 12-station tool turret with driven tools, chip conveyor, machine weight: approx. 6,000 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Fgshx Dxowh Tytsmmjb

Condition: used, Year of construction: 2024, Working dimension X: 2.600 mm Working dimension Y: 900 mm Working dimension Z: 60 mm Number of milling spindles: 1 Main motor power: 4,5 kW Rotation speed max: 24.000 rpm Tool clamping system: Collet Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction BIESSE Drilling aggregate BH 17 L: Yes Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: Safety mat, enclosed cabin Control: PC control Fgshx Dxmswa S Rbjmeb Software: BIESSE B_SOLID, BIESSE SOPHIA Conformity marking: CE mark, UKCA-Zeichen Total connection: 12 kW Weight: 1.800 kg Space requirement Length: 2,8 m Space requirement Width: 1,94 m Space requirement Height: 2 m

Condition: good (used), Year of construction: 2017, CNC Lathe - Horizontal Manufacturer: HWACHEON Machine Model: HI-TECH 450 BL YMC Control: Fanuc i-Series Year of Manufacture: 2017 TECHNICAL DATA Max. Turning Length: (mm) 1,214 Max. Turning Diameter: (mm) 420 Chuck Size: (mm) 305 Max. Turning Diameter Over bed: (mm) 700 Travel paths - X-axis: (mm) 280 - Y-axis: (mm) 120 - Z-axis: (mm) 1,390 Rapid traverses - Rapid traverse X/Y/Z: (m/min) 20 / 10 / 24 Spindle - Bar capacity: (mm) 89 - Max. speed: (rpm) 2,500 - Drive power: (kW) 22 / 18.5 - Torque: (Nm) 1,050 / 883.8 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: BMT-65 EQUIPMENT FEATURES + Flat guideways + C-axis + Y-axis + Blow-out gun + Steady rest carrier (suitable for SMW Autoblock) SLU-X-3-Z501215Z (SMW steady rest not included) + Manual steady rest, manufacturer RICHTER + Chip conveyor + Automatic tailstock and quill + Work light + Coolant tank capacity: 240 liters Fgohx Dxmjwhpgcomsb Power consumption: 55 kVA Weight: approx. 7,800 kg

Condition: good (used), Year of construction: 2012, x-travel 900 mm y-travel 800 mm z-travel 1020 mm b-axis 360 ° Control Professional 5 Fanuc size of pallet 630 x 630 mm spindle taper HSK-A100 spindle turning speed range 20-10.000 U/min Spindlemotor 35/25 kW max. torque on the spindle 488/305 Nm feed speeds 50.000 mm/min table load 1,2 t 0 d1.000 x h1.300 mm tool magazin: 97 pcs. tool length - max. 690 mm diameter of tools max. 100/300 mm weight of tools max. 30 kg weight of the machine ca. 20 t dimensions of the machine ca. LBH 6,0 x 4,3 x 3,3 m Incl. chip conveyor Incl. high pressure cooling system Incl. spindle cooling Fgshx Deu U Ufgoxmmeb Machine run on aluminum Processing time: 23,350 hours

Condition: used, Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller manufacturer: FANUC, controller model: 310 IS, total height: 1,980 mm, overall weight: 7,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, space requirement length: 3,000 mm, space requirement width: 2,400 mm, CONTROLS .. CNC controls FANUC 310 IS WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 600 mm .. Y-axis travel: 410 mm .. Z-axis travel: 460 mm .. rotating range A-axis from: -30 ° .. rotating range A-axis up to: 120 ° TABLE .. clamping surface diameter: 350 mm SPINDLE / HEAD .. spindle revolutions (max): 12000 /min .. drive power: 18 kW Fshevylpxjx Dxmmsgb AXIS DRIVES .. rapid traverse: 4800 mm/min TOOL MAGAZINE .. number of positions: 30 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3000 mm .. space requirements -front/back-: 2400 mm .. total height: 1980 mm .. total weight approx.: 7500 kg Operating hours: 35`000h Inklusieve: Vices see picture

Condition: like new (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 control SINUMERIK 840 D min. number of teeth 5 max. number of teeth 2000 transmission ratio 1:10 b-axis -5 / +90 ° total power requirement 75 kW voltage 400 V voltage 230 V weight of the machine ca. 9,4 t dimensions of the machine ca. 4,7 x 3,6 x 2,82 m Gleason-Pfauter 275 HC - NC bevel gear milling machine - Year of manufacture: 2002 - Equipped for milling with oil - Integrated magnetic chip conveyor, without cutter head + holders Technical data 275 HC: (workpiece) - Maximum transmission ratio --> 1:10 - Minimum number of teeth --> 5 - Maximum number of teeth --> 2000 - Maximum tooth height / full tooth depth --> 20 mm - Maximum tooth width --> 58 mm - Maximum pitch circle diameter --> 275 mm (tool) - Smallest permissible milling head Ø --> 2.5 inch - Largest permissible milling head Ø --> 9 inch (machine) -> slide path 325 mm - Vertical workpiece slide (Y-axis) --> 350 mm - Milling slide (Z-axis) --> 475 mm Fshxevzhhms Dxmmjgb -> Largest basic angle 90° - Direction -B --> -5° -> Workpiece table 212.71 mm (speeds) -> feeds 1 - 6,000 mm/min -> rapid traverse 10,000 mm/min - B-axis --> 40 °/s -> Speeds 0 - 1,100 min/-1 - Workpiece table --> 0 - 1,100 min/-1 Translated with (free version)

Year of construction: 2004, operating hours: 27,349 h, Condition: used, machine/vehicle number: AN0184, Turning diameter: 280 mm, turning length: 550 mm, travel (X/Z): 200/570 mm, C-axis, FANUC Series 21i-TB control, 12-station tool turret with driven tools, maximum speed: 5,000 rpm, chip conveyor, machine weight: approx. 5,500 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Fehx Dxowh Tymemmsgb

Condition: used, Year of construction: 2022, Working dimension X: 2.500 mm Working dimension Y: 1.000 mm Working dimension Z: 80 mm Number of milling spindles: 2 Main motor power: 3,3 kW Rotation speed max: 18.000 rpm 4th axis: Yes Horizontal drilling spindles in Y: 1 Cantilever machine: Yes Machine table: Feed-through technology Special workpiece clamping system: For doors Outfeed: vacuum lifter Milling for fittings: Yes Insert fittings: Yes Control: PC control Conformity marking: CE mark Fgshjwigt Nex Dxmmsb Space requirement Length: 9,7 m Space requirement Width: 4,1 m

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, GF AgieCharmilles FORM 3000 Year of manufacture 2008 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 amps Best achievable surface finish Ra 0.10 µm Fgehewh Smrjx Dxmmob AGIEVISION 5 user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Includes CAPA Electrode changer - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Fgjhxov Rxa Sj Dxmmsb Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Condition: used, Year of construction: 2006, max. wheel diameter 150 mm gear width 100 mm Fgohx Dxmeub Amrsmsb max. module 3 min. module 1 x-travel 190 mm y-travel 160 mm z-travel 100 mm turning speeds 5200 U/min swivel angle for work spindle +/- 40 ° weight 8,5 t with KUKA robot loading system TWIN-SPINDLE TECHNOLOGY The twin-spindle concept significantly shortens the cycle time and guarantees the high production output of the Reishauer generating grinding machine. During the grinding of a gear, the previously ground workpiece is unloaded on the second workpiece spindle workpiece is unloaded, the next gear to be ground is loaded and centred. REISHAUER GEAR HOBBING MODULE The generating module coordinates the complex axis movements of the generating grinding process and generates the exact geometry of the workpiece. Reishauer relies exclusively on the hobbing module developed in-house. This makes us more precise and continue to set the technological standards. REVOLUTIONARY PROCESSES Thanks to the targeted further development of the grinding process, Reishauer has been the technology leadership in the hard fine machining of gears for decades gears. One example of this is grinding with a cutting speed of 100 metres per second, polishing grinding and topological grinding. Equipment/accessories: - Turret with 2 workpiece spindles and dressing unit - Counter holder - 3 workpiece clamping devices - Centre unit with sensor - Hoffmann filter unit - 1 flange with grinding disc - Kuka robot - Safety devices for transport - documentation --> Grinding with LNS1 is possible on this machine. What is not possible istwist control grinding

Year of construction: 2012, operating hours: 8,758 h, Condition: used, machine/vehicle number: AT0602, Turning length: approx. 700 mm, turning diameter max.: 400 mm, travels (X/Y/Z): approx. 275/80/700 mm, 16-station tool turret with driven tools, C/A axis, control FANUC Series 31i-Model A, counter spindle, 12-station tool turret, with driven tools, speed: max. 5,000 rpm, tool holder: VDI 30, chip conveyor, Caution: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Fgjhx Dxmswh Tygemob

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Number of milling spindles: 1 Fgshx Dxmswa Skbsmeb Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 15 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable, Top and bottom Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Dowel insertion: Yes Dowel diameter: 8 mm Dowel length max: 40 mm Safety device: enclosed cabin Milling for fittings: Lamello Clamex Interface for .dxf data: Yes Control: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP, HOMAG tapio ready, HOMAG WOODWOP 8.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 18 kW Weight: 3.975 kg Space requirement Length: 4,8 m Space requirement Width: 2,4 m Space requirement Height: 2,5 m

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° Fshxeul Etdo Dxmmsgb - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min

Condition: used, Year of construction: 2011, operating hours: 9,191 h, machine/vehicle number: 18514, Travels (X/Y/Z): 630/560/510 mm, max. spindle speed: 12,000 rpm, 40-station tool changer, SK 40 tool holder, FANUC control, KNOLL 500 K-1 chip conveyor, KNOLL KF 200/FKA 1300 compact filter system, year of manufacture: 2017, Attention: The machine still contains drilling emulsion and must be vacuumed, taken away and disposed of properly by the buyer!!! Fjhxswh Tyyo Dxmmjgb

Condition: good (used), x-travel 300 mm y-travel 340 mm Fgehx Dxoucphxjmmjb z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown

Condition: used, Year of construction: 2011, operating hours: 16,613 h, machine/vehicle number: H-H41025, Travels (X/Y/Z): 1,020/&610/610 mm, spindle speed max.: 12,000 rpm, tool holder SK 40, 40-station tool changer, Ultimax control, chip conveyor, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Fjhxowh Ty Hj Dxmmogb