Used Schaffer 5370 Z for sale (11,249)

Condition: like new (used), Year of construction: 2022, operating hours: 789 h, Machine has done 789hours from new! General Specifications: • Swing Over Bed: 550 mm (21.65 inches) • Max. Cutting Diameter: 300 mm (11.81 inches) • Max. Cutting Length: 300 mm (11.81 inches) • Chuck Size: 6 inches Cslim Ijv Dlr Us Nbjrb • Machine Weight: Approximately 3,200 kg Axis Travels: • X-Axis Travel: 170 mm (6.69 inches) • Z-Axis Travel: 335 mm (13.19 inches) • Rapid Traverse Rates: 36 m/min (X and Z axes) Spindle: • Spindle Speed: Up to 6,000 RPM • Spindle Motor Power: 11/7.5 kW • Spindle Nose: A2-5 • Spindle Bore Diameter: 56 mm (2.20 inches) • Bar Capacity: 45 mm (1.77 inches) Turret: • Number of Tool Positions: 12 stations • Turret Type: BMT-55P • Indexing Time (1 face): 0.15 seconds Additional Features: • Slant Bed Design: 45-degree slant bed for enhanced rigidity and chip disposal • High-Rigidity Linear Guideways: Ensures precision and durability • Compact Footprint: Optimized for space-saving without compromising performance

Condition: repair required (used), Year of construction: 1997, Functionality: limited functionality, Used Soraluce model SP 10000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 60-station automatic tool changer and Siemens 840D control system. Serial Number: 108537. YEAR OF MANUFACTURE: 1997. TABLE LENGTH 10000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 8500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 60 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ Celim Ijwgd Rms Nbjrb FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Coolant system with 500 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Heidenhain linear scales, Linear recirculating slideway system. With 1000mm diameter integrated horizontal/vertical rotary table. LENGTH 14,785 MM WIDTH 4,770 MM HEIGHT 4,420 MM WEIGHT 30,000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, X-AXIS MOVEMENT: 800 MM X-AXIS WORK FEED RATE: 10-600 MM/MIN X-AXIS RAPID TRAVEL: 1500 MM/MIN Y-AXIS MOVEMENT: 450 MM Y-AXIS WORK FEED RATE: 10-600 MM/MIN Y-AXIS RAPID TRAVEL: 1500 MM/MIN Z-AXIS MOVEMENT: 250 MM Z-AXIS WORK FEED RATE: 10-600 MM/MIN Z-AXIS RAPID TRAVEL: 1500 MM/MIN TABLE EXTERIOR LENGTH: 800 MM EXTERIOR WIDTH: 300 MM Crjlewg Trgjim I Nbjb TSLOT SIZE: 12 MM NUMBER OF TSLOTS: 6 DISTANCE BETWEEN: 50 MM MAXIMUM DISTANCE BETWEEN THE VERTICAL SPINDLE AND THE TABLE: 365 MM

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 5000 mm Measurements depth 10000 mm Measurements height 4200 mm Machine weight 21000 Colimjwhr Ico I Nberb Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 4000 Spindle motor power 32 Tool taper ISO 50 Number of axis 4 Movement X-Axis Movement 3500 mm Y-Axis Movement 1250 mm Z-Axis Movement 1200 mm Table Table load 2500 Tools Number of index 20 Additional Equipment Coolant through spindle: Yes Chip conveyor: Yes Direct measurement on 3 axes: Yes Enclosure: Fully enclosed Tank volume (L): 500 This 4-axis Soraluce TA-35A was manufactured in 2012, ideal for precision CNC milling. Consider the opportunity to buy this Soraluce TA-35A CNC milling machine. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2001, Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle carton 1000 ml: 12-bottle carton / 12-bottle plastic Year of Manufacture: various (1991–2016) Scope of Delivery  Depalletizer (TMG VEGA 50, 2001) Uncaser (Zecchetti DE Z 2T, 1993) Bottle washer (Bardi NILO 1 16R, 2001) Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) Carbonator (Muvitec, 2001) Decapper (Grassle REM 20, 1991) Dry air line (Europool TF 03, 2013) Labeling machine (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) Case former (Siat HM 145, 2001) Case packer (Zacchetti IN Z 2T, 1993) Case sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) Sealant / hot melt unit (Preo EC5TRA2, 2001) Palletizing robot (ACMI ZX165U, 2002) Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) Silo caps (3 Master ALN600LT, 2001)   Crolimewhvc Re I Nbjb

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 CNC control Heidenhain iTNC 530 Travel paths X-axis 1040 mm Y-axis 600 mm Z-axis 500 mm Feed 40 m/min (X/Y/Z) Rapid traverse 40/70 m/min. (Y/Z-X) Table surface 1250 x 600 mm Table load 600 kg Spindle speed 1 - 8000 1/min. Power 13/19 kW at 100/40% ED Torque 140/200 Nm (S1/S6) Tool holder SK 40 Total power requirement 39 kVA Machine weight 8880 kg Transport dimensions 4100 x 2500 x 3000 mm Cslim I Newhvp Djbsrb Equipment: Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-way tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Electronic handwheel Heidenhain HR 410 Operating mode 4 Program check with extended manual intervention Machine documentation

Condition: good (used), Year of construction: 2009, Traverses X Y Z: 6300 x 1200 x 2000mm, Table 7000 x 1200mm, Cjliewga Rpem I Nborb B axis 360 degrees via 1 degree increments, A axis -/+ 45 degrees via 2.5 degree increments, Heidenhain iTNC530, ISO 50 spindle taper, 15,000rpm Spindle Speed, 30 station toolchanger, high pressure through spindle coolant, Interlocked guards, swarf conveyor. New spindle fitted 2025.

Condition: used, Year of construction: 1998, Functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. Creliewgd Rgsm I Nbeb LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: used, Year of construction: 2000, control FIDIA PCN 775 . x-travel 1000 mm y-travel 620 mm z-travel 700 mm Axis 5 Achsen simultan gesteuert weight 12 t +++++ Crslijwhqywjm I Nbjb Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Technical details x-travel 2940 mm y-travel 900 mm z-travel 950 mm Control Heidenhain iTNC 530 Additional information 5-axes Universal Machining Center Travels: X-axis: 2940 / 2 x 1220 mm Y-axis: 900 mm Z-axis: 950 mm CNC swivelling milling head with infinitely variable positioning, directly programmable from -90 to +90 deg. Speed range: 35 to 8000 rpm. Drive power: 20 kW Tool holder: SK 40 Tool positions: 2 x 22 (44) Table size: 3890 x 800 mm Built-in NC rotary table RTA4S800 Equipment: CNC control HEIDENHAIN iTNC 530 Crjljwhvntjim I Nbsb Chip conveyor Measuring probe, RENISHAW OMP 60 Coolant system Paper band filter SA 25/600, 20 bar Electronic handwheel Heidenhain HR 410 Operating instructions Machine parameters on storage medium

Condition: good (used), Year of construction: 2004, Technical details x-travel 1300 mm y-travel 1100 mm z-travel 1000 mm Control Mazatrol PC Fusion 640 M total power requirement 64,6 kVA weight of the machine ca. 24 t Additional information Equipment: Crelimswhvmve I Nbeb CNC control Mazak Mazatrol PC Fusion 640 M With Performance CNC package EIA / ISO conversion Internal coolant supply through the work spindle with 70 bar pump pressure but without coolant tank. Preparation of measuring device for Renishaw Tool length measurement up to 600 mm With 10-fold pallet changer PALLETECH B-axis 360° x 1° (deg) Tool changer 240-fold TOOL-HIVE (modified to 50% higher speed) Max. tool length 652 mm Max. tool diameter 135 mm, with free adjacent space 260 mm Tool weight 30 kg Chip conveyor Machine documentation Technical data: Max. workpiece diameter (interference circle) diameter 1250 mm Max. workpiece height 1250 mm Transverse movement of the column, X-axis 1300 mm Vertical movement of the spindle head, Y-axis 1100 mm Longitudinal movement of the table, Z-axis 1000 mm Distance from spindle center to pallet center 150 to 1150 mm Distance from spindle center to pallet surface 100 to 1200 mm Pallet size 800 x 800 mm Workpiece weight (pallet load) evenly loaded 2200 kg Pallet changing time 13 seconds Table switching 1° x 360 positions Spindle speed range 35 to 7000 rpm Torque increased with 2 gear levels Tool holder BT/SK 50 Main motor 15 minute power 30 kW / continuous power 22 kW Max. torque 1177 Nm Inner diameter of spindle bearing 100 mm Rapid traverse speed 40000 mm/min. Cutting feed 40000 mm/min. Machine dimensions (standard specification) Height (measured from ground) 3527 mm Width 4353 mm Depth 6900 mm Weight (standard specification) 24 t Power supply 64.6 kVA

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 3600 mm y-travel 920 mm z-travel 820 mm Control Siemens 840 D table surface area 4200 x 900 mm table load capacity - central/maximum 4200 kg tool taper HSK-A63 DIN 69893 spindle turning speed - stepless 20 - 18000 U/min feed speeds - 20000 mm/min rapid travel x/y/z 100 / 60 / 60 m/min spindle motor (100/40% ED) 25/35 kW total power requirement 92 kVA weight of the machine ca. 29,5 t dimensions of the machine ca. 10,00 x 6,50 m Additional information Maintenance condition: Regular maintenance, no maintenance backlog. Very good used condition ! * CNC control Siemens Sinumerik 840 D Powerline with ShopMill * Controlled axes 5 * Controlled swivel milling head (B-axis) +/- 90 deg., 1 deg. indexing * C-axis with CNC-rotary table * 126-station ATC 0 - 6,000 rpm Max. tool diameter (with free neighbouring space) 130 mm Max. tool length 360 mm 6,001 - 10,000 rpm. max. tool diameter 100 mm max. tool length 250 mm 10,001 - 12,000 rpm. max. tool diameter 80 mm max. tool length 250 mm 12,001 - 18,000 rpm. max. tool diameter 50 mm max. tool length 200 mm max. tool weight with automatic tool change 6 kg max. total tool weight in the magazine 180 kg * 5-station Pick-up magazine (additionally installed in the work area) - Max. tool length 450 mm * Chip conveyor * Compact filter system, 900 liters volume * Coolant through spindle 40 bar Without clamping plates, toolholders, etc. Transport dimensions approx. (L x W x H) Machine 7.830 x 3.400 x 3.100 mm Coolant system 2.100 x 1.200 x 2.150 mm Chip conveyor 1.300 x 8.900 x 1.700 mm Working area Travels X-axis 3,600 mm with B-axis travel left 1,316 mm Crelim I Newhvk Usbob with B-axis travel right 1,399 mm Work table Rigid table Clamping surface 4,200 x 900 mm Distance between T-slots 100 mm Number of T-slots 9 pieces Permissible load of the worktable Rigid table (table centre) 4,200 kg Main drive Drive power 25 KW (100% ED)35 KW (40% ED) Torque 87Nm (100% ED)130Nm (40% ED) Speed Infinitely programmable 20 - 18,000 rpm Speed in set-up mode 20 - 800 rpm

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t Cslim Iowhvide Nberb dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Technical details grinding length 600 mm grinding width 330 mm workpiece height - mm Control Siemens FM-NC grinding spindle drive 12,5 kW total power requirement 20 kVA weight of the machine ca. 5 t dimensions of the machine ca. 3200 x 2590 mm Additional information Precision, surface and profile grinding machine Equipment: CNC control Siemens FM-NC SIMATIC OP 27 Electronic hand-wheel Grinding wheel flange for planar contact Creep feed device Ball screw X-axis Coolant system with paper belt filter, 180 liters, coolant pump 75 l/min. Oil mist extraction device, weight 55 kg Housing in stainless steel execution included, costs new as an machine option EUR 15.000,- Electromagnetic clamping plate 600 x 300 mm, height 81 mm, weight approx. 100 kg Separate control cabinet Machine documentation Technical data: Grinding area max. 600 x 330 mm [Working areas] X-axis 800 mm Y-axis 370 mm Z-axis 330 mm Distance table-spindle center 600 mm Table height 900 mm Table load 450 kg [Grinding wheel] Grinding wheel diameter 300 mm Max. width 50 mm Grinding wheel bore 76.2 mm Speed 100 - 4000 rpm. [Speeds] Crjlswhvhasim I Nbsb X-axis up to 35000 mm/min. X-axis 2-30000 mm/min. Space requirement length x width 3200 x 2590 mm Machine height 2850 mm Transport height 2350 mm Machine weight 5000 kg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details x-travel 800 mm y-travel 500 mm z-travel 500 mm Control Siemens 828D total power requirement 25 kVA weight of the machine ca. 6,25 t dimensions of the machine ca. 3887 x 2256 x 2917 mm Additional information CNC control: Siemens 828 D Machine was put into operation in 2022. Machine with new milling spindle (replaced in December 2024). Table -Table size (LxW) 900x520 mm -Working height (table/floor) 870 mm -T-slots, number 5 pieces -T-slots, width 16 mm -T-slots, distance 80/100 mm -max. Table load 450 kg Travel paths -X-axis 800 mm -Y-axis 500 mm -Z-axis 500 mm Spindle -Mounting DIN 69871 40 ISO -Spindle speeds 10000 rpm -Spindle motor 10.5/15.8 kW -Spindle torque 50.0/75.4 Nm -Distance spindle nose/table 100-600 mm Feed rates -X-axis 10 m/min -Y-axis 10 m/min -Z-axis 10 m/min -Rapid traverse X-axis 30 m/min -Rapid traverse Y-axis 30 m/min -Rapid traverse Z-axis 30 m/min Tool changer -Type Arm type -Tool stations 30 stations -Max. tool -0 75/125 mm -max. tool length 300 mm -max. tool weight 8kg Coolant system -Pump output 155 l/mm -Tank capacity 496 liters Chip flushing system -Pump motor 850 W -Pump output 130 l/min -Pump pressure 4 bar Drive performance - Main drive motor output 10.5/15.8 kW - X-axis drive 2.64 kW - Y-axis drive 2.64 kW - Z-axis drive 5.4 kW Connected load 25 kVA Machine dimensions -Length without chip conveyor 2652 mm -Length with chip conveyor 3887 mm -Depth/width 2256 mm -Height 2917 mm Machine weight 6,250 kg Equipment: -CNC control Siemens 828D including ShopMill with 10.4 display -Portable electronic handwheel -Cooling through the spindle (IKZ) 20 bar with built-in coolant tank and cartridge filter system 40 microns -10,000 rpm belt drive spindle ISO 40 -Precision spindle, dynamically calibrated -Automatic 30-way tool changer ISO 40 (double arm version) -Precision ground work table with 5 T-slots, size 16 -C3 precision ball screws, pre-tensioned in all 3 axes -Servo motor with direct drive for all axes Crelijwhvf Eom I Nbsb -INA linear guides (roller guide) in all 3 axes -Automatic lubrication (oil) of the guides -Telescopic guide covers for all Axes -rear 4 bar chip flushing system -coolant system with integrated coolant tank and 4 cooling nozzles (3x water/1x air) -hinge - chip conveyor system with side discharge -full enclosure with roof and sliding doors with large window areas -light bar on the roof to display the machine status -work area lighting -side opening safety windows for easy machine cleaning -side, pivoting control panel -switch cabinet with heat exchanger -preparation for 4th axis, wiring etc. without servo drive -rigid thread cutting without compensating chuck (ragid tapping) -low voltage circuit -EMC and safety module -machine in accordance with CE -machine documentation / German-electronic

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details turning diameter 320 mm turning length 810 mm control FANUC MSX-701 / MAPPS 3C total power requirement 89 kVA kW weight of the machine ca. 8,3 t Additional information CNC high-performance CNC turning and milling center The machine has been running with oil. Condition: Very well maintained, the machine has recently been checked by a service technician with geometry measurement. We can send you with WhatsApp videos of the machine check up of our service technican. The machine has received a new Mapps unit with the latest version Mapps 3C including USB connection. Costs approx. EUR 8-10,000 including installation. Equipment: CNC control FANUC MSX-701 / MAPPS 3C Bar loader LNS SPRINT 552-565 Collet chuck HAINBUCH SPAN-TOP 65 on main and sub-spindle Basic range of standard turning holders and driven holders Fire extinguishing system made by Siemens Chip conveyor Coolant system with high-pressure filter system Workpiece unloading device with gripper Tool pre-setting device on spindle 1 and 2 Technical data: Swing diameter over bed 800 mm Swing diameter over cross slide 800 mm Maximum turning diameter 320 mm (interference with turret cover) Standard turning diameter 200 mm Maximum distance between the centers 1130 mm Maximum turning length 810 mm Maximum workpiece size 300 mm Travels: X-axis turret 1 and 2 210/210 mm Y-axis 100 mm (+65/-45 mm) Z-axis turret 1 and 2 810/810 mm B-axis 920 mm (headstock 2) Main spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Sub-spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Feed drives: Rapid traverse turret 1 X/Y/Z 30/20/50 m/min. Rapid traverse turret 2 X/Z 30/50 m/min. Tool turret: Number of turrets 2 Number of tool stations per turret 16 Of which 16 prepared for driven tools Shaft cross-section for turning tools 20 x 20 mm Maximum shaft diameter for boring bars 32 mm Turret switching time (1 station) 0.18 s Maximum speed of the driven tools 6000 (12000) rpm Drive power for driven tools 7.5/5.5 kW (5 min/continuous operation) Crslim I Nowhvdzebjb Dimensions, weights: Installation area without chip conveyor 3930 x 2721 mm Installation area with chip conveyor, ejection on the right 5120 x 2721 mm Total height (without automatic door) 2320 mm Net weight 8300 kg

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 2000 mm y-travel 2300 mm z-travel 1000 mm Control Siemens 840 D total power requirement 153 kVA weight of the machine ca. 67,0 t dimensions of the machine ca. 9,0 x 7,5 x 5,1 m Additional information Used universal machining center for turning, drilling and milling. Large machine in portal design with fixed portal and movable base with integrated rotary table / turning station and pallet holder. New price EUR 1.327.160,- (without service) The machine can be demonstrated and tested under power/chip. Technical data: Control: Siemens 840 D Max. workpiece diameter: 2000 mm Distance spindle nose to pallet surface min. 150 / max. 1120 mm Pallet changer: 2-way pallet changer with set-up station, pallet buffer space and rotating pallet transfer station Pallet size Diameter 1250 x 200 mm and Diameter 1600 x 230 mm Cjljwhvapsim I Nborb Pallet clamping surface designed with 12 star-shaped T-slots 22H9 Pallet center hole diameter 100 mm H6 Maximum permissible pallet load 3000 kg Rotating spindle speed range: 1 - 400 rpm Rotating spindle drive power: 70 kW Drilling and milling spindle: HV swivel head as B-axis by 90° freely programmable Water-cooled AC main drive as motor spindle Speed range of drilling and milling spindle: 1- 12000 rpm Drive power of drilling and milling spindle: 40 kW (S1-100%) Maximum spindle torque 137 Nm Hydraulic weight compensation for the spindle slide Spindle positioning per degree (M19) Main spindle bearing diameter 70 mm Cutting performance: Solid drilling diameter 50 mm in C45 Tapping M 42 in C45 Milling 400 cm³/min. in C45 Milling 3000 cm³/min. in aluminum Travel: X-axis: 2000 mm (cross slide travel) Y-axis: 2300 mm (longitudinal table travel) Z-axis: 1000 mm (spindle slide stroke) Carousel turning station with C-axis operation and holder for pallets with diameters of 1250 and 1600 mm Double main drive, each with an integrated water-cooled main drive motor and automatically switching gearbox with transmission ratio 1:4 Main drive 70 kW (S6-60%) Maximum speed 400 rpm. Maximum torque 25000 Nm Main bearing designed with 845 mm diameter axial bearing and 200 mm diameter radial bearing (2-way) Technical data C-axis drive: Number of positions 360,000 Measuring system directly via ROD Positioning accuracy +/- 0.001° Repeatability accuracy +/- 0.0005° Maximum speed 15 rpm

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height 570 mm Centre height over flat track 280 mm Diameter over bed 570 mm Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min x-axis feed force 7,100 N z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Celjwhu Ureim I Nberb Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical Croljwhu Tuoim I Nbsb centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Technical details x-travel 3500 mm y-travel 2200 mm z-travel 1200 mm Control Heidenhain iTNC 530 total power requirement 45 kW weight of the machine ca. 48 t Additional information The milling spindle was renewed / overhauled in November 2024. Operating hours 15918 Travels: X/Y/Z 3500/2200/1200 mm Table clamping area 3000 x 2000 mm Rapid traverse X/Y/Z 30 m/min. Max. spindle speed 20000 rpm Tool holder HSK A 63 Power 30 kW Torque 80 Nm Equipment: Crjlowhu S Reim I Nbob Heidenhain iTNC 530 CNC control Universal milling head with B axis -110°/+110° and C axis -200°/+200° 32-ATC tool changer Coolant through spindle 24 BAR THREE-DIMENSIONAL PROBE HEIDENHAIN TS 460

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Technical details x-travel 750 mm y-travel 400 mm z-travel 500 mm Control Heidenhain TNC 320 spindle turning speed range 3800 U/min transmission ratio 2 tool taper 40 SK table-size 1500 x 670 mm table surface area 1270 x 320 mm table load 600 kg spindle drive 5,5 kW distance spindle /table 100-600 (min.-max.) mm distance spindle center to column 526 mm quill travel 120 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 3,10 x 2,45 x 2,50 m Additional information Crslim Iswhu Swe Nbob CNC universal milling machine comes from a swiss company. Year of production: 2010 First machine installation: 2012 Equipment: * 3-axes CNC-control Heidenhain TNC 320 * Additional handwheels for manual operation * Manually swiveling milling head (45 /90 deg.) with drilling quill * Central lubrication * Coolant equipment * Documentation/manual Maximum machining capacities: Drilling mild steel 40 mm diameter Tapping M 36 Boring 120 mm

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Technical details x-travel 290 mm y-travel 150 mm z-travel 330 mm table surface area 210 x 600 mm tool taper SK 40 total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Crjlimowhu R Hs I Nbob Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, Two DECKEL FP 2 machines are available. Machine in green has the serial number 8070 Stock No. 2372 Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Crolim Iswhu N No Nbob Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Vertical + horizontal spindle Adjustable angle table Vertical milling head can be swiveled Machine in blue/gray has the serial number 2906 Stock No. 2371 Technical details x-travel 500 mm y-travel 170 mm z-travel 315 mm Table surface 700 x 280 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Mitutoyo Rigid angle table Vertical + horizontal spindle Vertical milling head swivels Feed and rapid traverse in 3 axes Machine lamp

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Technical details grinding length 1250 mm grinding width 600 mm Control SIEMENS LC 200 / TP277 weight of the machine ca. 7,7 t Additional information CNC precision, surface and profile grinding machine CNC control SIEMENS LC 200 / TP277 Dresser - straight Table load maximum to the magnetic chuck 1200 kg Drives: X-axis drive hydraulic Y and Z-axis drive with servo drive and ball screw measuring system: X-axis rotary with rotary encoder Y and Z axis linear scale traverse paths X axis 1400mm Y axis 600mm Z axis 600mm Grinding length 1250 mm Grinding width 600 Distance between table and spindle center 700 mm Grinding wheel diameter 400 mm Grinding wheel width 100 mm Grinding wheel bore 127 mm Note: Machine will be sold without a coolant device. Crjliowhu Ncom I Nbjb

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Cjlimswhuzxs I Nborb Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW