Used Schaffer 3036 S for sale (10,145)

Condition: excellent (used), Vötsch Type: VCL 4200/S Water-cooled climatic test chamber Irradiation device with metal halide radiator Door with window Internal dimensions : Width 2000 mm Height 1000 mm Depth 1150 mm External dimensions : Width 3300 mm Height 2000 mm Depth 1250 mm Ds Ia Ulsvccwlettout 2X pipe penetration 125 mm Performance range for temperature tests without irradiation Temperature range - 40°C to +150°C Temperature deviation ± 0.5 K in time, in the supply air to the test room Temperature change rate according to DIN 50 011 Part 12 Heating: approx. 1.0 K/min. Cooling: approx. 1.0 K/min to -30°C Performance range for climatic tests without irradiation Temperature range +10°C to +95°C Temperature constancy ± 1.0 K over time, in the supply air to the test room Humidity range 10 to 95 % r.h. Humidity constancy ± 1 to ± 3 % r.h. over time, in the supply air to the test room Dew point range +5°C to +88°C Irradiation (solar simulation attachment) Irradiation type: 4 pcs. 2 kW metal halide radiators each Irradiance 1000 W/m² ± 5 % in the range 280 to 3000 nm Irradiation uniformity ± 50 W in the guaranteed area Reference plane taking into account the installed lateral reflector plates Test area (W x D) 1700 x 800 mm with distance reference plane - UK irradiation unit of approx. 750 mm or 400 mm above the floor Performance range for temperature tests with irradiation Temperature range -10°C to +100°C Temperature deviation in time ± 1.0 K, in the supply air to the test room Rate of temperature change according to DIN 50 011, part 12 Heating: approx. 1.5 K/min. Cooling: approx. 0.5 K/min. Performance range for climatic tests with irradiation Temperature range + 10°C to + 80°C Temperature deviation ± 1.0 K over time, in the supply air to the test room Humidity range 10 % to 85 % r.h. Humidity deviation ± 1 % to ± 3 % r.h. temporally, in the supply air to the test room Dew point range + 5°C to + 76°C Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 90°C to 0°C in 1 h 0 °C to - 40°C in 1 h 0 °C to + 90°C in 1 h Humidity change 0 °C to + 90°C / 80 % r.h. in 1 h + 90°C / 80 % r.h. to 0°C in 1 h, whereby the final dehumidification value is not defined. Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 47°C to -30°C in 1 h - 30°C to + 23°C in 1 h + 23°C to + 47°C in 1 h Connections: Nominal voltage 400 V +6/-10 %, 3/N, 50 Hz Rated power 23 kW Nominal current 49 A Cekon 63 A plug Connection cable approx. 3.5 m Fuse protection 63 A, slow-blow on site Installation room Heated, with level floor Heat output to the installation room approx. 7 kW with radiation module switched on Weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 1992, Condition: good (used), Size: max 510 x 305 x 60 mm min 140 x 100 x 3 mm Ds Ieh Atbcsa Ulttjut Cover size: max 640 mm min 203 mm Speed: max 10.000 c/h Equipment: gathering machine - 15 feeders 256 perfect binder - 20 clamps - milling and roughening station - hot melt spine gluing unit - hot melt side gluing unit - premelter - S stream cover feeder - cover nipping and pressing station - lay down device optionales Equipment: --not included-- - PUR Leimbecken

Condition: new, Here we offer a new Ringler industrial cleaner with vibrating motor. Ringler industrial cleaner with vibratory motor Atiqur Rahman cleaner RI 331 Drive unit D3 soundproofed and splash-proof with 3 kW direct driven suction turbine and an integrated surface filters Lacquer RAL 9002 De Ia Ultsd H Amrjteut 99863980002350 new & original box Condition: new / new Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: good (used), Pressure vessel Duo Ia Ultog A Hc Hetjt 11 bar, 1500 Liter litre

Condition: excellent (used), Here we offer a Vötsch temperature chamber. Vötsch temperature chamber water cooled Outside: W x D x H (mm) 1100 x 2200 x 2320 Inside: W x D x H (mm) 800 x 800 x 790 Volume test chamber 500 L Characteristic values for temperature tests: Temp. range -70°C to +180°C Speed heating : 3 K/min Cooling speed: 2 K/min Electrical power: Rated power 15 kW Rated current 26 A 400 V +6/-10% 3/N 50Hz Weights: 675 kg Type: VT/S 7050 Dj Ia Uoichqqjlttsut R404 A and R23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 4.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment: • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals Duo Ia Ultolwvuxjtst • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Condition: new, Here we offer a new Ringler industrial cleaner with vibrating motor. Ringler industrial cleaner with vibratory motor Atiqur Rahman cleaner RI 331 Drive unit D3 soundproofed and splash-proof with 3 kW direct driven suction turbine and an integrated surface filters Lacquer RAL 9002 99863980002346 new and unused not boxed Due Ia Ujd H Amyolttst Condition: new / new Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch temperature chamber LN2 cooled (liquid nitrogen) Temperature chamber is operated with liquid nitrogen (cooled down) Temperature range -60°C to +180°C Test chamber dimensions: Depth: 575 mm Width: 550 mm Height: 645 mm Outer dimensions. Depth: 1465 mm Width: 830 mm Height: 1740 mm Test chamber volume 200 liters Mains voltage: 400V ±6/10% 3/N 50Hz Rated power : 17KW Rated current : 29A Weight approx. 350 kg Type: HT 6020/S For you as a buyer for safety the following information! Duo Ia Uleh Rd Idjttet The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), TIRA Type: Walk-in climate simulation cell TCZ 4020 S-2k Technical data: Temperature range -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 19m³ De Ia Ulouviumjttjut External dimensions (WxDxH) approx. 2660mm X 4960mm X 3300mm Test chamber (WxDxH) approx. 2270mm Χ 3190mm Χ 2756mm Door opening (WxH) approx. 2270mm X 2756mm Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch temperature chamber Here we offer a Vötsch temperature chamber. Converted to R452a Vötsch temperature chamber water cooled Outside: W x D x H (mm) 1100 x 2200 x 2320 Duo Ia Ultsic Rf Netot Interior: W x D x H (mm) 800 x 800 x 790 Volume test chamber 500 L Characteristic values for temperature tests: Temp. range -70°C to +180°C Speed heating : 3 K/min Cooling speed: 2 K/min Electrical power: Rated power 15 kW Rated current 26 A 400 V +6/-10% 3/N 50Hz Weights: 675 kg Type: VT/S 7050 Refrigerant: R452a + R23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a TIRA temperature test chamber. TIRA temperature test chamber air-cooled The chamber has the option for an external test box with external sensor connection can therefore also be used as an external temperature control unit. Temperature range -20°C...+140°C Temperature stability over time ± 0.1°C...± 0.3°C External dimensions Width 860 mm x depth 1500 mm x height 2100 mm Test chamber dimensions width 601 mm x depth 545 mm x height 692 mm Electrical connection 400V +6% / -10% 50Hz 3P+N+PE Dj Iaenyh T So Ulttout Rated current: 10.0 (max.17) A Rated power: 5.2 (max.9.0) kW Net weight: 735 kg Refrigerant: R404A / R23 Type: TTRE 2001S The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2018, Condition: excellent (used), EFD Type: MINAC 6/10 SM Heat treatment The compact design of the Minac induction heating system allows for easy installation and offers fast, concentrated and controlled heating with full repeatability. repeatability. Medium frequency product line Technical data: Maximum output power 10 kW Continuous output power 6 kW Mains voltage 400-480 V Frequency range 10-25 kHz Control range of output power 2-100% Recommended back-up fuse 16 A Cooling water approx. 4 l/min Cooling water flow temperature min./max. 18 - 35°C Cooling water pressure min./max. 4 - 6 bar Weight approx. 50 kg Dimensions (WxDxH): 345 x 708 x 453 mm Year of construction: 2018 optris CTlaser infrared thermometer Abbreviation: 3ML Due Ia Uljt Din Aottst Measuring range: 50 to 400 °C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature control ECU 1214C Hyfra eChilly water cooler 4-S Cooling capacity 4395W The device comes from the laboratory sector. Only a few operating hours. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus temperature chamber Here we offer a temperature chamber. Water-cooled Outside: W x D x H (mm) 1100 x 2200 x 2320 Inside: W x D x H (mm) 800 x 800 x 790 Test chamber volume 500 L Characteristic values for temperature tests: Temp. range -70°C to +180°C Heating speed: 3 K/min Cooling speed: 2 K/min Electrical power: Rated power 15 kW Rated current 26 A 400 V +6/-10% 3/N 50Hz Due Ieu Efmroa Ulttet Weights: 675 kg Type: HT/S 7050 R404 A and R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Here we offer a new Ringler industrial cleaner with vibrating motor. Ringler industrial cleaner with vibratory motor Atiqur Rahman cleaner RI 331 Drive unit D3 soundproofed and splash-proof with 3 kW direct driven suction turbine and an integrated surface filters Lacquer RAL 9002 99863980002351 new & original box Duo Isd H Ampea Ulttjt Condition: new / new Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: new, Here we offer a new Ringler industrial cleaner with vibrating motor. Ringler industrial cleaner with vibratory motor Atiqur Rahman cleaner RI 331 Drive unit D3 soundproofed and splash-proof with 3 kW direct driven suction turbine and an integrated surface filters Lacquer RAL 9002 99863980002338 new and assembled! not boxed Dj Iajd H Am Ao Ulttsut Condition: new / new Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: new, Here we offer a new Ringler industrial cleaner with vibrating motor. Ringler industrial cleaner with vibratory motor Atiqur Rahman cleaner RI 331 Drive unit D3 soundproofed and splash-proof with 3 kW direct driven suction turbine and an integrated surface filters Lacquer RAL 9002 99863980000017 new and assembled! not boxed Condition: new / new Scope of delivery: (See image) Do Ia Ulod H Am Esttjut (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Ds Ia Ulju U Ixmotteut Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Duo Ia Ulevitmdettst Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Duj Ia Uljuzv Rgsttet We will be happy to answer any further questions you may have on the phone.

Condition: new, Here we offer a new Ringler industrial cleaner with vibrating motor. Ringler industrial cleaner with vibratory motor Atiqur Rahman cleaner RI 331 Duj Iajd H Amtj Ulttot Drive unit D3 soundproofed and splash-proof with 3 kW direct driven suction turbine and an integrated surface filters Lacquer RAL 9002 99863980002352 new & original box Condition: new / new Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Year of construction: 2010, Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Do Ia Usrbiyfslttsut Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VC 4200/S Climate test chamber 2500 liters water-cooled Temperature test: Temperature range -40°C to + 180°C Temperature deviation in time: ± 0.3 to ± 1.0 Spatial temperature deviation: ± 1.0 to ± 2.0 Temperature gradient 2 to 4 Heating speed: 2.0 K/min Cooling rate: 3.0 K/min Climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation over time: ± 0.1 to ± 0.5 Temperature deviation over time: ± 1 to ± 1.5 Temperature gradient 2 to 3 Humidity range: 10% to 98% r.h. Humidity deviation over time: + 1 to 3 % r.h. Dew point range +5 to +89°C Test room dimensions: Width approx. 2000 mm x depth 1150 mm x height 1150 mm External dimensions: Width approx. 3500 mm x depth 1450 mm x height 2100 mm Nominal voltage 3/N/PE AC 400 V ±10%50Hz Rated power 13 kW Nominal current 21 A Refrigerant R-452A Weight approx. 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: Duo Iasu Au Ute Ulttet 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System Dj Ia Ultovcnpaotsut HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus temperature chamber Here we offer a temperature chamber. Water-cooled Outside: W x D x H (mm) 1100 x 2200 x 2320 Inside: W x D x H (mm) 800 x 800 x 790 Test chamber volume 500 L Characteristic values for temperature tests: Temp. range -70°C to +180°C Heating speed: 3 K/min Cooling speed: 2 K/min Electrical power: Rated power 15 kW Rated current 26 A 400 V +6/-10% 3/N 50Hz Ds Isu Efm Soa Ulttjut Weights: 675 kg Type: HT/S 7050 R404 A and R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500mm/min (adjustable) Dus Iasr Ixq Rs Ulttet Voltage: 220V AC ± 10%, 50/60Hz Clamping jaws: 0-7 mm Weight: approx. 175 kg Dimensions (WxDxH): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.