Used Schaffer 2030 S for sale (10,262)

Year of construction: 2010, Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. Fjbvq Dorbiyfj Sajgb can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Absauganlage / Extraction System Schuko Duplo S 18 Baujahr / Year 2007 - Serial-No. 1807159 Volumenstrom 2380 m3/h Motor kW 2,2 - A 1 V230/400 Hz 50 Fgebvq Dsv Azr Is Sajb Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Functionality: fully functional, Wolpert Dia Testor 2 Rc S hardness tester for the method according to Brinell DIN EN ISO 6506 Vickers DIN EN ISO 6507 Rockwell DIN EN ISO 6508 Test load levels 5 to 250 kgf HV 5 – 10 – 20 – 30 – 40 – 50 – 125 kgf HB 15.625 – 31.25 – 62.5 – 187.5 – 250 kgf HR 60 – 100 – 150, preload 10 kgf Test height – throat depth: 0 – 300 mm / 150 mm Fjbvq Dov Ram He Sasgb Dimensions: 940 mm × 350 mm × 610 mm Weight: 200 kg Power supply: 230 V, 50-60 Hz Shipping via Shipping is possible upon request. #8275

Year of construction: 1992, Condition: good (used), Size: max 510 x 305 x 60 mm min 140 x 100 x 3 mm Fgobvq D Ssh Atbceaeb Cover size: max 640 mm min 203 mm Speed: max 10.000 c/h Equipment: gathering machine - 15 feeders 256 perfect binder - 20 clamps - milling and roughening station - hot melt spine gluing unit - hot melt side gluing unit - premelter - S stream cover feeder - cover nipping and pressing station - lay down device optionales Equipment: --not included-- - PUR Leimbecken

Condition: good (used), Year of construction: 1999, Four side planer Leadermac Compact 423 S - machine in stock - after the technical review - year of production 1999 - chrome tops - electronic height adjustment TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm Fsbvq D Sjgufi Seaegb - electric adjustment of the left head - electric adjustment of the upper head - electronic height adjustment - five top steel rollers - one upper rubber roller - diameter of the spindles 40 mm 1 lower spindle 5.5 kW diameter 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW - tool diameters 160 and 180 mm - pneumatic clamps - feed on cardan shafts - smoothly adjustable feed 6-20 m / min - 2.2 kW feed motor power - chrome tops - length of the preliminary table top 1980 mm - diameter of nozzles 4x 130 mm Machine dimensions: - length 340 cm - width 190 cm - height 200 cm - weight 2200 kg

Condition: good (used), CNC MACHINING CENTER MAHO MH 700 S - Stroke X axis: 700 [mm] - Stroke Y axis: 500 [mm] - Stroke Z axis: 600 [mm] - Spindle stroke: 80 [mm] - Spindle speed: 20 - 6300 [rpm] - Feed rates: 1 - 4000 [mm/min] Fjbvq D Sjrnq R Reasgb - X and Z rapid feed: 12 [m/min] - Y fast feed: 10 [m/min] - Accuracy: 0.001 [mm]

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping jaws: 0-7 mm Weight: approx. 175 kg Dimensions (WxDxH): 88 x 50.5 x 150 cm Fgjbver Ixq Rjq D Saeb Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, mileage: 524,370 km, power: 324 kW (440.52 HP), first registration: 07/2014, overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, VDL hook device type: S-21-6400, max. lifting capacity 21,000 kg, hydraulic container interior locking, emergency brake assistant, stability control assistant, adaptive cruise control, ABS, ASR, cruise control, differential lock rear axle, traction aid, air conditioning, auxiliary heating, navigation system, heated and electrically adjustable exterior mirrors, electric window lifter driver and passenger door, electric sliding/tilting roof, cool box, multifunction steering wheel, driver comfort suspension seat, 1x sleeping bed, 2 x rotating beacon, fog lights, headlight cleaning system, air suspension with lifting and lowering device front and rear axle, trailing-steered lifting axle, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us! Fjbvovnnhysq D Sasgb

Condition: new, mileage: 46 km, power: 419 kW (569.68 HP), fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/70R22.5, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: navigation system, onboard computer, parking heater, sleeping cabin, spoiler, Iveco Stralis S-Way 570 READY FOR DELIVERY !!! BRAND NEW YOURS AT €1,599.00 DOWN PAYMENT 0 REDEMPTION 16.100,00€ -Intarder -Automatic air conditioning -2 Sleeping places -Night air conditioning -Bluetooth -Webasto -Anti fog -Cruise control and speed limiter -Refrigerator -2tanks -Air cab suspension - POSSIBILITY OF FINANCING OR LEASING CUSTOMIZED ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS 0% DOWN PAYMENT Fgsbvqsr Imkye D Sasb TEL. -0823 1686306 -335 6713062 -377 7064530 OFFICE OPENING HOURS: LUNEDI-VENERDI8:30/19:00 SATURDAY 08:30/14:00 WE OFFER WIDE CHOICE OF USED MULTIMARKS COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder-semi-trailer-semi-trailer refrigerated tank- Lamberet-schmitz ISUZU-CASSONEFISSO-GRU-RIBING-TELONATO-BOX-SPONDACARICATRIC E-CELLA FRIGO- COIBENTED WITH FRIDGE -FURBANK

Condition: good (used), Pressure vessel 11 bar, 1500 Liter litre Fgjbvog A Hc Hsq D Saob

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Ice flaker MAJA Year of manufacture 2009, Voltage 400 V, 3 Ph, 50 Hz, 5.42 A, Power 1.9 kW, Fobvqsv S H Tpj D Sasgb Cooling agent: R404A Dimensions: MAJA: 800x600x860 Box: 1350x1900x1670

Condition: like new (used), Year of construction: 2022, operating hours: 2 h, Functionality: fully functional, machine/vehicle number: 88241-VG, NASTRO-SB™ M Carton Sealing Machine – Efficient, safe, and flexible – Carton sealing only from the bottom. The NASTRO-SB™ M is the ideal solution for quickly and reliably sealing consistent carton sizes. Thanks to manual width adjustment via a hand crank, the machine can be flexibly adapted to different carton sizes. ✔ Efficient: Up to 20 cartons per minute with a belt speed of 22 m/min ✔ Flexible: Suitable for PP adhesive tape (hot melt) and paper adhesive tape ✔ Convenient: Adhesive heads can be changed without tools ✔ Safe: Centrally mounted emergency stop switch for maximum user safety ✔ Reliable: 75 mm high belt drives for safe carton transport Fgsbev N I Ntjvq D Saeb Order the SIAT NASTRO-SB™ M5-S (Item 88241-VG) now for only €2,999 – including shipping within Germany! Perfect for efficient and transportable sealing of your goods! Request more information now.

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Fjbvq Dsvcnpae Sajgb Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2012, operating hours: 2,865 h, Equipment: all wheel drive, KUBOTA 4 cylinder engine, power 34.3 KW / 46.8 HP, loading shovel, quick-change system, 3 control circuits, various attachments Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us! Fsbvq Djvnm Hno Saegb

Condition: good (used), Functionality: fully functional, mileage: 869,000 km, power: 427 kW (580.56 HP), first registration: 03/2017, fuel type: diesel, color: red, axle configuration: 4x2, tire size: 385/65R22.5+315/80R22.5, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, airbag, navigation system, onboard computer, sleeping cabin, *Scania S 580 V8 NA *YOURS AT 990€ - ADVANCE 0 - *REPAYMENT 10,200.00€ -Registered 03/2017 -Retarder : Retarder -Km 869,000 -Navigator -Tyres 50% AT OTHER LOCATIONS IN OUR GROUP WE ARE OFFICIAL MERCEDES-BENZ DEALER D E TRUCK S P A HEAD OFFICE NAPLES (NA) DOMENICO ESPOSITO S P A HEADQUARTER EBOLI (SA) OFFICIAL DEALER FORD TRUCK DOMENICO TRUCK SRL HEADQUARTER MARCIANISE (CE) Fgebvq Der Ar Ido Sasb HEADQUARTER NAPLES (NA) HEADQUARTER EBOLI (SA) AND OFFICIAL DEALER PIAGGIO COMMERCIAL DOMENICO ESPOSITO SPA -POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING AT HEADQUARTERS. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS ADVANCE 0 TEL. -0823 1686306 -335 6713062 -377 7064530 WE OFFER A WIDE SELECTION OF USED MULTIMARKS COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder-semi-trailer-semi-trailer refrigerated tank-Lamberet-schmitz ISUZU-CASSONEFISSO-GRU-RIBING-TELONATO-BOX-SPONDACARICATRIC E-CELLA FRIGO- COIBENTED WITH FRIGO -FURBANK)

Condition: good (used), Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 4.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment: • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks Fobvq D Sjlwvuxeaogb • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Condition: used, mileage: 703,809 km, power: 243 kW (330.39 HP), first registration: 01/2010, fuel type: diesel, number of seats: 48, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, +++Original mileage+++ +++Rust damage to the underbody+++ +++Pick-up price+++ +++No TÜV+++ Engine: Iveco Emission class: Euro 5 Gearbox: 5-speed automatic Voith Seats: 45+2+1 high/fixed Standing places: 33 _____ Safety Retarder * ABS, ESP, EBS * Fog lights * Multifunction steering wheel Passenger compartment auxiliary heating * Air conditioning * Tour guide microphone * Stroller space Fgjbequrmtevq D Saeb * Wheelchair space * Wheelchair ramp * Stop request * Interior camera Exterior Matrix GOBRA * Double-width center door * Raising/lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Central locking * Roof hatches, fans, roof vents Audio & communication Radio/CD/USB port Other German vehicle registration document * Vehicle dimensions: Length 12.00 m, width 2.52 m, height 3.20 m * Tires: VA 80%, HA 60% * Our internal vehicle number: 9191 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: used, mileage: 486,560 km, power: 210 kW (285.52 HP), first registration: 09/2010, fuel type: diesel, number of seats: 44, gearing type: automatic, emission class: euro5, color: blue, brakes: retarder, Equipment: ABS, parking heater, Green environmental badge, Euro V engine, gearbox type ZF-Ecolife, ABS, ASR, kneeling, retarder, cruise control, digital tachograph, Webasto additional heating, loudspeaker, air doors at the front and wide middle door, standing places: 47, number of seats: 42 + 1, 1x folding seats, high-strength seats, 1x stroller space, 1x wheelchair space, grab bar, double glazing, curtains, wheelchair ramp, Lawo Luminator Matrix, 2x roof hatch, electrically adjustable outside mirrors, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this property. Febvq D Sevnpnnoaegb Please contact us!

Condition: ready for operation (used), Cutting width max 2.200 mm Feeding height max 140 mm Fgsbved Ewdueq D Saob Feeding depth max 1.750 mm Front table length 750 mm Table height 890 mm Equipment • side table left • 2 knives

Year of construction: 1990, Condition: good (used), Built in 1990 Size: max 460 x 305 x 60 mm min 140 x 103 x 2 mm Book block thickness: max 60 mm min 2 mm Cover size: max 470 x 655 mm min 140 x 210 mm Speed: max 7.000 c/h Equipment gathering machine: gatherer ZTM 370 x 20 missing sheet and double sheet control criss-cross delivery perfect binder: 26 clamps milling station Fgobvq D Segmr N Tsaob spine preparation station dust extraction fume extraction hotmelt spine gluing unit 2nd hotmelt spine gluing unit hotmelt side gluing unit stream cover feeder 2. cover pressing station lay down device standards: 1 set of operator manuals 1 set of electrical diagrams 1 set of standard tools

Year of construction: 2004, Condition: good (used), Three knife trimmer automatic with integrated pre stacker Fgsbvqof Iyb Nj D Sasb Built in 2004 Size: max 384 x 340 mm min 140 x 103 mm Size trimmed: max 304 x 310 mm min 136 x 100 mm Book thickness: max 70 mm min 2 mm Speed: max 1.000-7.000 c/h Power requirement: kW 14 kW Compressed air: 40 Nm³/h bei 6 bar Width: 3.612 mm Depth: 2.950 mm Height: 2.030 mm Weight: 4.000 kg (approx.) Equipment equipment for changing the format: - 1 set of pressing plates & holders - 1 set of size extensions - 1 set of table quick change plates - 3 sets of cutting sticks - 2 set of knives

Year of construction: 2001, Condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Febvjdyky Tsq D Sasgb Speed max up to 15.000 Prod./h Table height 876 mm

Year of construction: 1988, Condition: ready for operation (used), Built in 1988 Size max 1.150 x 1.650 mm Feeding height max 185 mm Width 1.935 mm Depth 1.420 mm Power requirements 1,3 kW (220/380V, 50Hz) Weight 700 kg (approx.) Equipment • fixed gauge at the rear • side gauge on the left or on the right • air table • air-removing roller Fjbvq D Ssd Ic Uxoaogb

Year of construction: 2015, Condition: good (used), Rebuilt: 2015 Size: max 510 x 305 x 60 mm min 140 x 100 x 3 mm Cover size: Fgjbvq Ded Afayj Sajb max 640 mm min 203 mm Speed max: 10.000 c/h Equipment gathering machine: 18 feeders 210 controls: miss and double sheet control intermediate elements: spiral race away jogging element perfect binder: 20 clamps clamp pitch 24" milling and roughening station hot melt spine gluing unit hot melt side gluing unit 2 premelters S stream cover feeder S cover nipping and pressing station

Year of construction: 1998, Condition: ready for operation (used), Built in 1998 Fsbvq D Sjdykhmeasgb Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm