Used Schaffer 2020 for sale (1,987)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,292 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: Siemens 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2020. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a 12-position VDI 40 turret and a maximum spindle speed of 3250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19-inch touchscreen • Controlled axes: 3 (X, Z, C) • Spindle operating hours: approx. 20,292 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • Main spindle C-axisMain spindle and chuck • Spindle nose: A2-8 • Upgraded bar capacity: 102 mm • Spindle power: 33 kW @ 40% / 22 kW continuous • Spindle torque: 630 Nm @ 40% / 420 Nm continuous • Hydraulic chuck: SMW BH-D 320 / A2-8, D103 mm • Differential clamping pressure functionTool turret and driven tools • Turret: 12-position VDI 40 with 6 additional BT stations • Driven tools: yes • Max driven-tool speed: 4,000 rpm • Driven-tool power: 5.44 kW @ 40% • Driven-tool torque: 20 Nm @ 40%Tailstock • Tailstock travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options • Setup package • Tropical climate package Djdpfx Akez Ipawecowc • 12-bar coolant supply system • Manual working-area washdown gun • Variable spindle speed function • DMG MORI Service Agent • DMG MORI Messenger V2 • DMG MORI NETservice • DMG MORI IoTconnector • Screen languages: German/PolishConstruction • Inclined cast-iron bed • Linear guideways, width 45 mm Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • WTO VDI 40 driven-tool holder set • Set of three soft jaws for BH-D315 chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. The machine is being sold as is. Dwedez Iqrnspfx Akcjc

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 516245021024, Year of construction: 2008, load capacity: 2,000 kg, lifting height: 4,300 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,080 mm, power: 9 kW (12.24 HP), gearing type: automatic, battery capacity: 625 Ah, battery voltage: 40 V, battery weight: 850 kg, overall weight: 3,423 kg, empty load weight: 2,573 kg, color: orange, Equipment: lighting, pallet forks, sideshift, trailer coupling, We would be happy to prepare a financing lease offer for you. The device is in perfect technical and visual condition. The battery acid density is within the acceptable range. Includes charger. Dedpozu Afvefx Akcjwc Includes Aquamatik filling water tank. We can also perform a new safety inspection (UVV) and service, if desired. Transportation can be arranged throughout Europe without any problems. No guarantee against errors.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 90609919, Year of construction: 2020, operating hours: 267 h, load capacity: 1,600 kg, lifting height: 6,000 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,520 mm, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 1,354 kg, Equipment: lighting, Jungheinrich EJC 216 Pallet stacker, year of manufacture 2020 with a Triplex mast and scales Details: Jungheinrich EJC 216 Year of manufacture: 2020 Work hours (h): 267 Mast type: Triplex Lift height (mm): 6000 Freelift (mm): 2000 Build height (mm): 2520 Initial lift: No Lift capacity (kg): 1600 Dsdjyaavwopfx Akcowc Fork length (mm): 1150 Weight (kg): 1354 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2020 Battery capacity (Ah): 375 Battery voltage (V): 24 Accessories: Power steering. Scales. Height counter. Flashing beacon. Load guard. Comments: Full freelift.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 2020 PA Eclipse SL4 tray sealer in almost new condition. Direct from closed UK factory. Dwodpsz I Ey Hofx Akcec

Condition: good (used), Brüel & Kjaer Integrated Sound Level Meter, Type 2239 A Dwedpfxjicauus Akcjc Item condition: Used Last calibration: 07/2020 You can find more interfaces – new and used – in our shop! International shipping costs available upon request! Buy interfaces and other products at a low price – here you buy products from a professional for professionals – you will find more attractive offers in our SHOP.

Condition: excellent (used), PR9000 pallet racking system for 42 Euro pallets This pallet racking system has been tested according to DIN EN 15512 with a maximum load of 2,200 kg per beam level and therefore has a maximum field load of 9,000 kg and can be loaded with 550 kg per pallet. The anti-slip safety device prevents stored goods from sliding off when the racking is arranged in parallel. Made of solid, high-quality steel for extreme robustness. Easily withstands high loads of up to 9,000 kg per field. High-quality processing of the entire pallet racking system. Dsdpfxjv Hp Eqo Akcjwc Plenty of storage space thanks to the 2 levels and 4 bays. Eye-catching blue and orange color scheme for maximum safety. Upright profile: Height: 5500 mm Material: Steel S-355 JR Dimensions: 80 W x 70 D x 1.5 Hole spacing: 50 mm (grid – offset) Surface: Powder-coated blue Profile design: Omega profile Depth: 1100 mm Manufacturing: Cold-rolled profile Field load: 9000 kg Beams: The beams can be individually hung at different heights in a 50 mm grid. Total load capacity per beam level: 1800 mm beam: 2000 kg 2700 mm beam: 3000 kg 3600 mm beam: 2200 kg Material: Steel S-235 JR (cold-rolled steel) Profile design: Rectangular profile Mounting: Hook tabs on each side of the beam for hanging, secured with a locking pin Surface: Powder-coated orange Manufacturing: Bent sheet steel Scope of delivery: 05 x Upright PR9000, 5.5 m high / 110 cm deep, field load: 9,000 kg 12 x Beam PR9000, 3600 mm wide, incl. locking pins, bay load: 2200 kg 04 x Beam PR9000, 1800 mm wide, incl. locking pins, bay load: 2000 kg 06 x Anti-slip safety device PR9000, 3600 mm 02 x Anti-slip safety device PR9000, 1800 mm Year of manufacture: 2020-2022 You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2020, PR9000 pallet racking for 42 Euro pallets This pallet racking system has been tested according to DIN EN 15512 with a maximum load of 2,200 kg per beam level and therefore has a maximum field load of 9,000 kg and can be loaded with 550 kg per pallet. The anti-collapse safety device prevents stored goods from sliding off when the racking is arranged in parallel. Made of solid, high-quality steel for maximum robustness. Easily withstands high loads of up to 9,000 kg per bay Dsdpfx Akev Hpz Escewc High-quality processing of the entire pallet racking system Plenty of storage space, thanks to the 2 levels and 4 bays Eye-catching blue and orange color scheme for maximum safety Upright profile: Height: 5000 mm Material: Steel S-355 JR Dimensions: 80 W x 70 D x 1.5 Hole pitch: 50 mm (grid – staggered) Surface: Powder-coated blue Profile design: Omega profile Depth: 1100 mm Manufacturing: Cold-rolled profile Field load: 9000 kg Beams: The beams can be individually hung at a grid of 50 mm in height. Total load capacity per beam level: 1800 mm beam: 2000 kg 2700 mm beam: 3000 kg 3600 mm beam: 2200 kg Material: Steel S-235 JR (cold-rolled steel) Profile design: Rectangular profile Fastening: Hook tabs on each side of the beam for hanging, secured with a locking pin Surface: Powder-coated orange Manufacturing: Bent steel sheet Scope of delivery: 05 x PR9000 uprights, 5 m high / 110 cm deep, field load: 9,000 kg 12 x PR9000 beams, 3600 cm wide, including locking pins, bay load: 2200 kg 04 x PR9000 beams, 1800 cm wide, including locking pins, bay load: 2000 kg 06 x PR9000 anti-collapse safety device, 3600 mm 02 x PR9000 anti-collapse safety device, 1800 mm Year of manufacture: 2020-2022 You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min - Maximum pressure: 10 bar - Tank capacity: 500 l - Motor power: 2 x 5.5 kW - Power supply: 400 V - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control Dwsdpfxez Ek Drs Akcoc - 1st unit: 428 operating hours - 2nd unit: 418 operating hours

Condition: excellent (used), mileage: 150,910 km, power: 346 kW (470.43 HP), first registration: 03/2021, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: black, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, Year of construction: 2021, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, = Additional Options and Accessories = - Leaf spring suspension - Aluminum alloy wheels - Air horn - Radio/CD player - Rotating beacon - Sun visor - Power take-off (PTO) - Power take-off (PTO) = Notes = 6x4 Euro 6D Leaf spring suspension Three-way tipper Hiab X-HiDuo 188 B-3 3x hydraulically extendable Remote control Including rotator and grapple Only 150,000 km In very good condition! Ready for immediate use! = Further Information = Axle configuration Front axle: Steered Rear axle 1: Suspension: Leaf spring suspension Rear axle 2: Suspension: Leaf spring suspension Weights Unladen weight: 16,824 kg Payload: 9,176 kg GVW: 26,000 kg Functional Crane: Hiab X-HiDuo 188 B-3, year of manufacture 2020, behind the cab Body manufacturer: COX 3-way tipper Djdjz Nh U Repfx Akcjwc Condition Technical condition: very good Optical condition: very good

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: DV 800, type of input current: three-phase, input voltage: 400 V, operating pressure: 6 bar, input current: 16 A, We offer this used Stiller DV 800 semi-automatic can seaming machine with a work table, manufactured in 2020. According to production records, approximately 30,000 cans have been sealed. Dedpfx Akez I Ty Iscswc Serial number: 20089 Cans: Diameter 40-99 mm, height 20 - 150 mm (seaming unit included) Year of manufacture: 2020 Weight: 140 kg Voltage: 230/400 V Current: 16 A Frequency: 50 Hz Power: 0.6 kW Compressed air: 3.4 m3/hour at 6 bar. Cans in 2 different heights, including lids (approximately 6,000 pieces each), are available for the installed seaming unit. Installed seaming head (replaceable) up to 99 mm, chuck (replaceable) exactly 60 mm. Compressed air, including air dehumidifier, is required for operation. The option to purchase an air compressor and air dehumidifier, including couplings and connecting hoses, is available. Forklift/ramp for loading is available. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2020, !! We are happy to advise you !! All systems are from 2020 or 2021 //// Used until 12/2021 7 x Domino printer 2 heads new price €4500 now €1900 1 x Makroprint x8 printer with 8 heads new price €18,000 now €8000 3 x Makroprint x4 printer with 4 heads new price €10,000 now €4000 2x Makroprint X1 new €1250 Dedpfxjrlmwms Akcewc 1x Edding In Line €1000 4x Chinese and Italian system opinion German open to all HP cartridges piece with 4 heads €1500 A discount is possible for 2 devices!!!

Condition: like new (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, Year of manufacture: 2020 Djdpez Nihfsfx Akcjwc Table: 4,500 * 2,000 mm X: 4,000 mm Y: 3,000 mm Z: 1,500 mm Additional information: Heidenhain TNC 640 HSCI Main spindle ISO 50 Spindle speeds: max. 6,000 rpm Tool changer: 60 tools Coolant through the spindle UAD/universal head 0.002/0.002 degrees Many additional options!

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 285 mm, travel distance Z-axis: 1,000 mm, number of axes: 2, Horizontal turning machine manufactured in 2020. This JESSEY MJ1840 features a swing over bed of 460 mm and a distance between centres of 1000 mm. It is equipped with an 80 mm spindle bore and a D1-8 Camlock spindle nose. If you are looking to get high-quality turning capabilities, consider the JESSEY MJ1840 machine we have for sale. Contact us for further details. - Compound Rest Travel: 120 mm- Swing Over Bed: 460 mm (18")- Swing Over Cross Slide: 285 mm- Distance Between Centres: 1000 mm (40")- Spindle Bore: 80 mm- Spindle Nose: D1-8 Camlock- Tailstock Total Travel: 170 mm- Accessories / Equipment: Quick-change tool post / 4-way tool post, chip pan/tray, chuck guard, splash guard, coolant device Dwedpoz Nkkujfx Akcec Technical Specification Counter Spindle No Driven Tools No

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,470 h, load capacity: 1,600 kg, lifting height: 8,000 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 3,221 mm, fork length: 1,150 mm, empty load weight: 4,000 kg, total length: 1,800 mm, drive type: Elektro, construction width: 1,300 mm, Reach truck Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: normal Front tire type: Polyurethane Front tire condition: 60 - 80% Rear tire type: Polyurethane Rear tire condition: 60 - 80% Dedpfx Aez I E U Dekcewc Battery voltage: 48V Battery capacity: 620Ah Battery year of manufacture: 2020 Side shifter, 3rd valve, impulse control, full free lift

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION Dwjdpfx Akjv Iaqyjcoc The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,807 mm, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis Mazak VCN-530C was manufactured in 2020. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,300 x 550 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-530C vertical machining centre we have for sale. Contact us for further details. Working area and travels • Table-to-spindle nose: 150–660 mm • Column surface to spindle centre: 586 mmTable • Dimensions: 1,300 × 550 mm • T-slots: 5 × 18 mm; pitch 100 mmSpindle • Drive: Electrically selected two-range • Spindle bearing bore: 70 mm • Acceleration time: 2.0 s • Motor power: 18.5 kW (5 min) / 11 kW (40% ED) / 7.5 kW (S1)Feed rates • Rapid traverse X/Y/Z: 42 m/min • Cutting feed X/Y/Z: 1–42,000 mm/minAutomatic tool changer • Max tool diameter: 80 mm (adjacent tools) / 125 mm (adjacent pockets empty) • Max tool length: 350 mm (from gauge line) • Tool selection: MAZATROL random memory, shortest-path • Tool-to-tool time: 1.3 sCoolant and chip management • Through-spindle high-pressure coolant: approx. 15 kgf/cm² (~14.7 bar) • Coolant tank: 250 L • Coolant flushing for covers • Manual washdown gun • Workpiece air blast • Preparation for mist extractionControl functions and probing preparation • Synchronous tapping • Maximum program size: 8 MB • G00 Slope Constant (rapid movement optimisation) • Preparation for Renishaw OMP60 workpiece probeMachine dimensions Dwodpfoz Iqy Eex Akcjc • Floor space: 2,880 × 3,102 mm Additional equipment • Kitagawa NC rotary table, MR250 series (Type: MR250RAE13) • Date of manufacture: Oct 2020 • Weight: 85 kg • Mechanical mounting for MR250 included • CROWTHER left-side hinged-belt chip conveyor • Additional working-area lighting • Three-colour LED signal tower • Polish manuals and safety labels Technical Specification Taper Size SK 40

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 63 h, load capacity: 1,600 kg, lifting height: 3,500 mm, free lift: 1,350 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Mast type: Duplex Transmission: Automatic Condition: Like new Technical condition: very good Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire type: Polyurethane Rear tire condition: 80 - 100% Battery voltage: 24V Battery year of manufacture: 2020 Dedpjz Iun Tjfx Akcjwc Description: Price includes a new safety inspection (UVV). The unit is in like-new condition, reflecting its few operating hours. Battery has been regenerated using a power cycler, including a Kappa test, resulting in 85% capacity (see last image). Charger integrated. We can arrange cost-effective transportation for you. Lease-to-own options are available! We are an official partner of Jungheinrich Germany. Full free lift, CE certified.

Condition: excellent (used), mileage: 122,997 km, power: 105 kW (142.76 HP), first registration: 01/2021, fuel type: diesel, tire size: 235/65R16C, axle configuration: 4x2, wheelbase: 4,320 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 6,750 mm, total width: 2,250 mm, total height: 3,030 mm, permissible axle load (axle 1): 1,860 kg, permissible axle load (axle 2): 2,250 kg, Year of construction: 2021, Equipment: ABS, AdBlue, EBS, airbag, central locking, electric window regulation, fog lights, power assisted steering, traction control, = Additional options and accessories = - Alarm system - Leaf spring suspension - Leather interior - Leather upholstery - Radio/CD player - Rearview camera - Sliding side door - Stability control - Auxiliary heating system = Notes = Mercedes-Benz Sprinter 314 CDi XARIOS 600Mt 2 compartments 122,997 km 2021 3,500 kg permissible total weight Multimedia system Manual transmission Leather seats Rearview camera Euro6-D MOT/APK valid until 01-2027 Belgian transporter Chassis number: W1V9071351N108999 Video of the transporter (YouTube): * A total of 2 vehicles, 1 from 2020, 1 from 2021 * EXPORT SERVICES ————— • NL transit registration/license plates with insurance for 14 days • Austrian transit registration/license plates with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with a semi-trailer The prices for export services are exclusive of the quoted price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. = Further information = Technical information Number of cylinders: 4 Engine displacement: 2,143 cc Axle configuration Tire size: 235/65R16C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 1,860 kg; Steered; Axle brand: UNIROYAL; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle: Max. axle load: 2,250 kg; Axle brand: CONTINENTAL; Tire tread depth left: 80%; Tire tread depth right: 80% Weights Unladen weight: 2,811 kg Payload: 689 kg GVW: 3,500 kg Functional Refrigeration: 29 °C to 30 °C Body brand: CARRIER XARIOS 600Mt Interior Dsdezxyucepfx Akcjwc Upholstery: Leather Maintenance, history, and condition APK (Technical Inspection): valid until 01.2027 Technical condition: very good Optical condition: very good Further information Please contact Olivier Geerts or Edwin Geerts for more information.

Condition: excellent (used), Bystronic BySprint 3015 2kW Fiber Laser With Byloader Sheet Loader And Shuttle Table. Dsdpfx Akez It U Sscowc New 2011. Upgraded head and new fibre fitted in 2020 at a cost of £46k. Maintained by Bystronic. Fume extraction. Available with Nitrogen plant including Sauer Tornado Booster Compressor.

Year of construction: 2020, condition: used, functionality: fully functional, For sale, starting from our location in 45891 Gelsenkirchen, is a Yamato TSDW-206-W semi-automatic multi-head scale. This multi-head scale was manufactured in 2020, is used, and comes from a business liquidation. Dsdpfjz Izq Uox Akcowc The scale is currently still connected to power and can be inspected by appointment. We will gladly send you the technical data upon request if you are interested in purchasing it. Dismantling and loading are the responsibility of the buyer.

Condition: good (used), Year of construction: 2020, operating hours: 3,023 h, load capacity: 4,000 kg, lifting height: 5,980 mm, fuel type: gas, mast type: triplex, construction height: 2,800 mm, empty load weight: 6,542 kg, mileage: 3,023 km, LPG triple forklift Brand: STILL (Germany) Year of manufacture: 2020 Only 3,023 operating hours Capacity: 4,000 kg Lifting height: 5,980 mm Mast height: 2,800 mm FREELIFT Third function Watch the video on YouTube Dedpfx Asz Drc Hskcewc

Condition: good (used), Ruhle Model MR 100 380V Dsdpfx Aksz N A Rmecewc with 4 blades

Condition: used, Year of construction: 2020, x-travel 762 mm y-travel 508 mm z-travel 610 mm control MAX5 Hurco distance spindle nose and table 152 - 762 mm speed mainspindle max. 12.000 U/min power capacity - main spindel 13,4 kW max. Torque 214 Nm tool taper SK 40 DIN 69871 A table surface area 1.020 x 510 mm max. table load 1.500 kg T-slots 5 x 18 x 100 mm number of toolpositions 30 pos. tool taper SK 40 tool diameter max. 80 / 76 mm tool length - max. 300 mm weight of tools max. 7 kg rapid traverse X-axis 38 m/min rapid traverse Y-axis 38 m/min rapid traverse Z-axis 32 m/min total power requirement 24 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 4,1 x 2,8 m CNC-Machining Center Vertical HURCO - VMX 30i - Year 2020 / Commissioning 2025 - only approx. 500 operating hours - Adaptipath Trochoidal milling for higher metal removal rates, Dodpjz I T Rtjfx Akcswc controlled step-over, and residual material detection - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous tapping (Tapping without a compensating holder) - incl. 15x high-clamping force chucks BDV40-HMC20S-85 - incl. 3x tapping chucks BDV40-MGT6-80 - incl. mechanical centering vise BSM 250 - incl. 1x set of quick-change hardened grip jaws with grip strip - incl. various tap holders - incl. various drill bits and reducing sleeves

Condition: used, functionality: fully functional, Year of construction: 2020, overall weight: 800 kg, total height: 1,420 mm, total length: 2,130 mm, total width: 1,150 mm, load capacity: 16,000 kg, coilDorn Dwjdpsz N Ipnsfx Akcoc Producing company Hanselmann Type 147311 Year built 2020 Height (mm) 1,420 Length (mm) 2,130 Lifting weight (kg) 16,000 Weight (kg) 800 Width (mm) 1,150