Used Schaffer 9380 T for sale (13,104)

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height 570 mm Centre height over flat track 280 mm Diameter over bed 570 mm Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min x-axis feed force 7,100 N z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Feliowhu Ursn Hi Depg Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Condition: used, Year of construction: 2022, liter capacity 980 l Pressure of pump 8 / 80 bar total power requirement 16,7 kVA weight of the machine ca. 1,1 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BMF 980 L -4 - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 2 - Pump output: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 2.2 kW, 3,501 rpm, 6.9 m³/h, 115.0 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. cooling unit (Deltatherm E4) Technical Data: Fjlijwhzm Isn Hi Dopg - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm Feliovdt Rxen Hi Depg tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m

Condition: used, Year of construction: 2000, turning diameter 450 mm turning length 1500 mm control Siemens 840 C weight of the machine ca. 8,4 t Fslijv Sk Abon Hi Djpg

Condition: used, Year of construction: 1968, faceplate diameter 1000 mm turning diameter over slide rest 1200 mm centre distance 1500 mm Fjlewhqzzjin Hi Dspg bed indentation . weight of the machine ca. 6 t

Condition: used, Functionality: fully functional, machine/vehicle number: H2X392J00868, Year of construction: 2018, operating hours: 3,206 h, load capacity: 2,500 kg, lifting height: 5,510 mm, free lift: 1,700 mm, mast type: triplex, construction height: 2,400 mm, fork length: 2,000 mm, drive type: Treibgas, LPG forklift Fahrgestellnummer: H2X392J00868 Mast type: Triplex Fpsljuhxdtein Hi Djg Technical condition: good Description: Linde H25T-02 M0390 Year of construction: 2018 Operating hours: 3206 The device is in visually good and technically in good condition. Errors and prior sale reserved. If you have not found your truck, please contact us. We still have a large selection of other devices on site 3rd valve,

Condition: used, Year of construction: 2001, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens Sinumerik 810 D spindle bore 62 mm spindle turning speed - stepless 3 - 2500 U/min transmission ratio 2 Fpjliowhu T Uen Hi Dsg feeds - longitudinal max. 10000 mm/min feeds - cross max. 5000 mm/min tailstock quill taper MT 5 main drive motor 20/30 kW Dimensions (LxWxH) 4,10 x 2,16 x 1,98 m total power requirement 35 kVA weight of the machine ca. 5,3 t Additional information The machine was used in 1-shift operation. Equipment/accessories: * CNC control SIEMENS Sinumerik 810 D * Tool/swivelling holder Parat size 3, Sandvik Capto C4 * Boring rest * Full clamping cylinder Forkardt OKRJ 120 for operating power chucks * Hydraulic unit Hydac * Steady-rest, diameter 20-315 mm * 3-jaw manual chuck, diameter 315 mm * Coolant device * Chip conveyor

Condition: used, Year of construction: 2007, turning diameter 130 mm turning length 280 mm control Siemens Sinumerik 840D Fpelin Hiev Skz Rj Dog weight of the machine ca. 4 t

Condition: used, Year of construction: 1987, 300 - 1400 weight 5 t cooling ja Fpslin Hijwhqzbe Dsg

Condition: used, Functionality: fully functional, machine/vehicle number: 6475718, Year of construction: 2016, operating hours: 1,933 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,890 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Chassis number: 6475718 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 24V Battery Ah: 500Ah Folinouhwp Ij Hi Dopg Description: BT SWE160L No.: R0223 Year of construction: 2016 Read operating hours: 1933 The device is visually and technically in very good condition. Charger on request. Identical device with the same year of manufacture and the same BH, HH, FH and GL available. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the appliance! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All sales of used goods are subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Initial lift,

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool Fpjliewhu Tuon Hi Djg does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: used, Year of construction: 2000, control FIDIA PCN 775 . x-travel 1000 mm y-travel 620 mm z-travel 700 mm Axis 5 Achsen simultan gesteuert weight 12 t +++++ Felijwhqywon Hi Dopg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Functionality: fully functional, machine/vehicle number: 068FGJ35F10509, Year of construction: 2021, operating hours: 22 h, load capacity: 3,500 kg, lifting height: 7,000 mm, free lift: 2,800 mm, mast type: triplex, construction height: 3,600 mm, fork length: 1,200 mm, drive type: Treibgas, net weight: 5,850 kg, LPG forklift Fahrgestellnummer: 068FGJ35F10509 Mast type: Triplex Technical condition: very good Front tires type: solid rubber Rear tires type: solid rubber Description: Toyota 06-8FGJ35F No.: M0055 Year of construction: 2021 Operating hours: 22 The machine is visually and technically in very good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site. Sideshift, fork positioner, Fsleuhxm Isin Hi Djpg 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, - UVV - camera - pedal-controlled - front double tires

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Technical details x-travel 3500 mm y-travel 2200 mm z-travel 1200 mm Control Heidenhain iTNC 530 total power requirement 45 kW weight of the machine ca. 48 t Additional information The milling spindle was renewed / overhauled in November 2024. Operating hours 15918 Travels: X/Y/Z 3500/2200/1200 mm Table clamping area 3000 x 2000 mm Rapid traverse X/Y/Z 30 m/min. Max. spindle speed 20000 rpm Tool holder HSK A 63 Power 30 kW Torque 80 Nm Equipment: Fpelijwhu S Rsn Hi Deg Heidenhain iTNC 530 CNC control Universal milling head with B axis -110°/+110° and C axis -200°/+200° 32-ATC tool changer Coolant through spindle 24 BAR THREE-DIMENSIONAL PROBE HEIDENHAIN TS 460

Condition: used, Year of construction: 1999, x-travel 4500 mm y-travel 2000 mm z-travel 1200 mm spindle taper ISO 50 Cube 2 Fpsliowhqyqen Hi Dog weight of the machine ca. 20.000 t

Condition: used, Functionality: fully functional, machine/vehicle number: 14282, Year of construction: 2019, operating hours: 5,843 h, load capacity: 1,600 kg, lifting height: 3,330 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,170 mm, fork length: 1,600 mm, drive type: Elektro, Electric 3-wheel forklift truck Chassis number: 14282 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Battery Volt: 48V Battery Ah: 690Ah Battery year of construction: 2021 Description: Toyota 8FBE16T No.: R0406 Year of manufacture: 2019 Operating hours: 5843 The device is visually and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other devices on site. Sideshift, Fslin Hisuhxipo Dopg 3rd valve,

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Technical details x-travel 750 mm Fjlewhu Swoin Hi Depg y-travel 400 mm z-travel 500 mm Control Heidenhain TNC 320 spindle turning speed range 3800 U/min transmission ratio 2 tool taper 40 SK table-size 1500 x 670 mm table surface area 1270 x 320 mm table load 600 kg spindle drive 5,5 kW distance spindle /table 100-600 (min.-max.) mm distance spindle center to column 526 mm quill travel 120 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 3,10 x 2,45 x 2,50 m Additional information CNC universal milling machine comes from a swiss company. Year of production: 2010 First machine installation: 2012 Equipment: * 3-axes CNC-control Heidenhain TNC 320 * Additional handwheels for manual operation * Manually swiveling milling head (45 /90 deg.) with drilling quill * Central lubrication * Coolant equipment * Documentation/manual Maximum machining capacities: Drilling mild steel 40 mm diameter Tapping M 36 Boring 120 mm

Condition: used, Functionality: fully functional, machine/vehicle number: 14007, Year of construction: 2019, operating hours: 6,634 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,450 mm, fuel type: electric, mast type: duplex, construction height: 2,130 mm, fork length: 1,200 mm, drive type: Elektro, net weight: 3,200 kg, Electric 3-wheel forklift truck Chassis number: 14007 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Battery Volt: 48V Battery Ah: 690Ah Felin Houhxrdsi Depg Battery year of construction: 2019 Description: Toyota 8FBE16T No.: R0246 Year of manufacture: 2019 Operating hours: 6634 The device is visually and technically in normal condition. Charger on request Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Sideshift, 3rd valve,

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, Two DECKEL FP 2 machines are available. Machine in green has the serial number 8070 Stock No. 2372 Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Vertical + horizontal spindle Adjustable angle table Vertical milling head can be swiveled Machine in blue/gray has the serial number 2906 Stock No. 2371 Technical details x-travel 500 mm y-travel 170 mm z-travel 315 mm Table surface 700 x 280 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Fpoliswhu N Non Hi Dog Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Mitutoyo Rigid angle table Vertical + horizontal spindle Vertical milling head swivels Feed and rapid traverse in 3 axes Machine lamp

Condition: used, Functionality: fully functional, machine/vehicle number: 10557, Year of construction: 2017, operating hours: 10,918 h, load capacity: 1,600 kg, lifting height: 3,260 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, fork length: 1,200 mm, drive type: Elektro, net weight: 3,228 kg, Electric 4-wheel forklift truck Chassis number: 10557 Mast type: Duplex Fpslin Houhxrqei Dog Condition: Ready for use and fully functional Technical condition: good Description: Toyota 8FBMK16T No.: R0136 Year of construction: 2017 Operating hours: 10,918 The device is visually in normal and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other devices on site. Sideshift, fork positioner, Opening width: 770 mm 3rd valve, 4th valve,

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Technical details grinding length 1250 mm grinding width 600 mm Control SIEMENS LC 200 / TP277 weight of the machine ca. 7,7 t Additional information CNC precision, surface and profile grinding machine CNC control SIEMENS LC 200 / TP277 Dresser - straight Table load maximum to the magnetic chuck 1200 kg Drives: X-axis drive hydraulic Y and Z-axis drive with servo drive and ball screw measuring system: X-axis rotary with rotary encoder Y and Z axis linear scale traverse paths X axis 1400mm Y axis 600mm Z axis 600mm Grinding length 1250 mm Grinding width 600 Distance between table and spindle center 700 mm Grinding wheel diameter 400 mm Grinding wheel width 100 mm Grinding wheel bore 127 mm Note: Folin Hijwhu Nco Depg Machine will be sold without a coolant device.

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Foliswhu Irjn Hi Djpg Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Felin Hiowhu Hne Djpg Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: good (used), Year of construction: 1986, Functionality: fully functional, cutting diameter 420 mm saw band length 6300 mm cutting width 420 mm capacity 90 degrees: square 420 x 420 mm cutting speed 20 - 130 m/min dimensions of saw-band 6300 x 38 x 1,3 mm sawing motor 4,0 kW Dimensions (LxWxH) 2420 x 3050 x 2150 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t Additional information Used fully automatic band sawing machine Smallest cut-off length 6 mm Automatic feed length single 600 mm Feed length multiple 5400 mm Minimum offcut length single cut 75 mm Automatic operation 115 mm Folinewhu E Re Hi Djpg * Hydraulic saw blade tensioning * Infinitely variable cutting feed * Hydraulic material feed * Automatic feed with horizontal vice, hydraulic material clamping, infinitely variable * Coolant device * Chip conveyor * Roller-type conveyor, approx. 2500 x 500 mm

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Fpeljwhuzxjin Hi Dsg Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW